Determination of some organophosphorus and azole group pesticides in water samples by dispersive liquid-liquid microextraction coupled with GC/MS

A dispersive liquid-liquid microextraction (DLLME) procedure coupled with GC/MS detection is described for preconcentration and determination of some organophosphorus and azole group pesticides from water samples. Experimental conditions affecting the DLLME procedure were optimized by means of an experimental design. A mixture of 60 microL chlorobenzene (extraction solvent) and 750 microL acetonitrile (disperser solvent), 3.5 min extraction time, and 7.5 mL aqueous sample volume were chosen for the best recovery by DLLME. The linear range was 1.6-32 microg/L. The LOD ranged from 48.8 to 68.7 ng/L. The RSD values for organophosphorus and azole group pesticides at spiking levels of 3, 6, and 9 microg/L in water samples were in the range of 1.1-12.8%. The applicability and accuracy of the developed method were determined by analysis of spiked water samples, and the recoveries of the analyzed pesticides from artesian, stream, and tap waters at spiking levels of 3, 6, and 9 microg/L were 89.3-105.6, 89.5-103.0, and 92.0-111.3%, respectively.     

Simultaneous determination of perfluoroalkyl phosphonates, carboxylates, and sulfonates in drinking water

A trace analytical method based on high performance liquid chromatography coupled to quadrupole time-of-flight high resolution mass spectrometry was developed for simultaneous determination of perfluoroalkyl phosphonates (PFPAs, carbon chain lengths C6,8,10), perfluoroalkyl carboxylates (PFCAs, C5-12), and perfluoroalkyl sulfonates (PFSAs, C4,6,8,10) in drinking water (tap water). Analytes were enriched on a mixed mode co-polymeric sorbent (C8+quaternary amine) using solid phase extraction. Chromatographic separation was achieved on a Zorbax Extend C18 reversed phase column using a mobile phase gradient consisting of water, methanol, and acetonitrile containing 2mM ammonium acetate and 5 mM 1-methyl piperidine. The mass spectrometer was operated in electrospray negative ion mode. Use of 1-methyl piperidine in the mobile phase resulted in a significant increase in instrument sensitivity for PFPAs through improved chromatographic resolution, background suppression, and increased ionization efficiency. Method detection limits for extraction of 500 mL tap water were in the ranges of 0.095-0.17 ng/L, 0.027-0.17 ng/L, and 0.014-0.052 ng/L for PFPAs, PFCAs, and PFSAs, respectively. Whole method recoveries at a spiking level of 0.5 ng/L to 500 mL HPLC grade water were 40-56%, 56-97%, and 55-77% for PFPAs, PFCAs, and PFSAs, respectively. A matrix effect (signal enhancement) was observed in the detection of PFPAs in tap water extracts, leading to calculated recoveries of 249-297% at a 0.5 ng/L spiking level. This effect resulted in an additional improvement of method sensitivity for PFPAs. To compensate for the matrix effect, PFPAs in tap water were quantified using matrix-matched and extracted calibration standards. The method was successfully applied to the analysis of drinking water collected from six European countries. PFPAs were not detected except for perfluorooctyl phosphonate (PFOPA) at close to the detection limit of 0.095 ng/L in two water samples from Amsterdam, the Netherlands. Highest levels were found for perfluorobutane sulfonate (PFBS, 18.8 ng/L) and perfluorooctanoate (PFOA, 8.6 ng/L) in samples from Amsterdam as well as for perfluorooctane sulfonate (PFOS, 8.8 ng/L) in tap water from Stockholm, Sweden.     

Simultaneous determination of the herbicides diquat and paraquat in water

A method based on solid-phase extraction (on silica cartridges) and high-performance liquid chromatography (HPLC) followed by diode array UV detection is presented as an analytical tool for screening diquat (DQ) and paraquat (PQ) in drinking waters. The method is useful for quality control laboratories of water companies and beverage industries. Absolute recoveries of DQ and PQ from drinking water (25 mL in all cases), spiked at levels between 0.1, 1.0, and 5.0 microg/L, range from 91% to 103%. Relative standard deviation percentages are between 3% and 11%. Quantitation and detection limits are 70 and 40 ng/L for DQ and 90 and 60 ng/L for PQ, respectively; therefore, these herbicides can be detected and quantitated at levels below the limits established by the European Union.     

Analysis of benzene, toluene, ethylbenzene, xylenes and n-aldehydes in melted snow water via solid-phase dynamic extraction combined with gas chromatography/mass spectrometry

The present study describes a method based on headspace-solid-phase dynamic extraction (HS-SPDE) followed by GC/MS for the qualitative and quantitative analysis of benzene, toluene, ethylbenzene, o-, m- and p-xylene (BTEX), and n-aldehydes (C(6)-C(10)) in water. To enhance the extraction capability of the HS-SPDE a new cooling device was tested that controls the temperature of the SPDE needle during extraction. Extraction and desorption parameters such as the number of extraction cycles, extraction temperature, desorption volume and desorption flow rate have been optimized. Detection limits for BTEX ranged from 19 ng/L (benzene) to 30 ng/L (m/p-xylene), while those for n-aldehydes ranged from 21 ng/L (n-heptanal) to 63 ng/L (n-hexanal). At a concentration level of 2 microg/L, the relative standard deviations (RSDs) for BTEX ranged from 3.9% (benzene) to 15.3% (ethylbenzene), while RSDs for n-aldehydes were between 6.1% (n-octanal) and 16.5% (n-hexanal) (n=7). Best results were obtained when the analyzed water samples were heated to 50 degrees C. At a water temperature of 70 degrees C GC responses decreased for all analyzed compounds. At a defined water temperature, a significant improvement of the GC response was achieved by cooling of the SPDE fiber during water extraction in comparison to an extraction keeping the fiber at room temperature. Evaluating the extraction cycles, for BTEX, the sensitivity was almost similar using 20, 40 and 60 extraction cycles. In contrast, the highest GC responses for n-aldehydes were achieved by the use of 60 extraction cycles. Optimizing the desorption parameters, best results were achieved using the smallest technical available desorption volume of 500 microL and the highest technical desorption flow rate of 50 microL/s. The method was applied to the analysis of melted snow samples taken from the Jungfraujoch, Switzerland (3580 m asl), revealing the presence of BTEX and aldehydes in snow.     

Optimization of a novel method for determination of benzene, toluene, ethylbenzene, and xylenes in hair and waste water samples by carbon nanotubes reinforced sol-gel based hollow fiber solid phase microextraction and gas chromatography using factorial experimental design

A novel design of solid phase microextraction fiber containing carbon nanotube reinforced sol-gel which was protected by polypropylene hollow fiber (HF-SPME) was developed for pre-concentration and determination of BTEX in environmental waste water and human hair samples. The method validation was included and satisfying results with high pre-concentration factors were obtained. In the present study orthogonal array experimental design (OAD) procedure with OA(16) (4(4)) matrix was applied to study the effect of four factors influencing the HF-SPME method efficiency: stirring speed, volume of adsorption organic solvent, extraction and desorption time of the sample solution, by which the effect of each factor was estimated using individual contributions as response functions in the screening process. Analysis of variance (ANOVA) was employed for estimating the main significant factors and their percentage contributions in extraction. Calibration curves were plotted using ten spiking levels of BTEX in the concentration ranges of 0.02-30,000ng/mL with correlation coefficients (r) 0.989-0.9991 for analytes. Under the optimized extraction conditions, the method showed good linearity (0.3-20,000ng/L), repeatability, low limits of detections (0.49-0.7ng/L) and excellent pre-concentration factors (185-1872). The best conditions which were estimated then applied for the analysis of BTEX compounds in the real samples.     

固相萃取-超高压液相色谱-串联质谱同时分析环境水样中四环素类和喹诺酮类抗生素

应用固相萃取及超高压液相色谱-质谱联用技术,建立了环境水样中4种四环素类和6种喹诺酮类抗生素的同时分析方法。样品经HLB固相萃取柱富集、净化后用甲醇洗脱,以超高压液相色谱-串联质谱仪多反应监测(MRM)离子模式定性、定量分析。以河水和海水为基质,卡巴氧为替代物进行回收率评价,4种四环素类抗生素在加标质量浓度分别为20.0 ng/L和100.0 ng/L时的回收率为94.0%～117.0%,相对标准偏差为2.0%～9.7%(n=4),方法的检出限均为20.0 ng/L;6种喹诺酮类抗生素在加标质量浓度分别为5.0 ng/L和20.0 ng/L时的回收率为63.6%～93.9%,相对标准偏差为1.6%～8.1%(n=4),方法的检出限为0.4 ng/L。结果表明,所建立的方法可成功地应用于近岸海域表层环境水样中目标抗生素残留的分析。     

气相色谱法同时测定水中12种挥发性消毒副产物

建立液-液萃取气相色谱法电子捕获检测器(GC/ECD)同时测定饮用水中12种挥发性消毒副产物(Disinfection byproducts, DBPs)的方法.采用过程标准校正降低预处理过程中引入的误差,方法检出限为0.08~0.21 μg/L, 全部组分在21.50 min内测定完成.不同浓度的DBPs在自来水和地表水中的回收率为80.9%~115.7%,相对标准偏差在0.9%~9.9%之间.各组分在0.5~200 μg/L浓度范围内线性关系良好,相关系数R>0.99.应用本方法测定了饮用水和地表水及其氯化后样品中DBPs的含量.本方法简便、快速、稳定,满足饮用水中挥发性DBPs的检测要求.     

Modified dispersive liquid-liquid microextraction for pre-concentration of benzene, toluene, ethylbenzene and xylenes prior to their determination by GC

We have developed a modified method for the extraction and preconcentration of benzene, toluene, ethylbenzene and xylenes (BTEX) in aqueous samples. It based on dispersive liquid-liquid microextraction along with solidification of floating organic microdrops. The dispersion of microvolumes of an extracting solvent into the aqueous occurs without dispersive solvent. Various parameters have been optimized. BTEX were quantified via GC with FID detection. Under optimized conditions, the preconcentration factors range from 301 to 514, extraction efficiencies from 60 to 103 %, repeatabilities from 2.2 to 4.1 %, and intermediate precisions from 3.5 to 7.0 %. The relative recovery for each analyte in water samples at three spiking levels is >85.6 %, with a relative standard deviation of <7.4 %.

环境水样中9种三唑类农药的固相萃取-气相色谱-质谱分析

应用C18柱萃取/富集,NH2柱净化,气相色谱-质谱联用技术检测,建立了环境水样中9种三唑类农药同时分析的方法。9种目标农药在0.025～0.500 mg/L质量浓度范围内线性关系良好,方法的检出限为0.002～0.009 μg/L。以实际水样为基底,加标质量浓度为0.025 μg/L和0.100 μg/L时,9种目标农药的基底加标回收率和相对标准偏差(n=3)分别为68.4%～113.9%,1.6%～6.9%(河水)和70.3%～115.2%,0.8%～8.2%(海水)。该方法操作简单、灵敏度高、选择性好,符合多种农药残留分析的要求,并成功地应用于福建九龙江河口区表层水样中三唑类农药的残留状况调查。     

Separation and determination of benzene, toluene, ethylbenzene and o-xylene compounds in water using directly suspended droplet microextraction coupled with gas chromatography-flame ionization detector

The directly suspended droplet microextraction (DSDME) technique coupled with the capillary gas chromatography-flame ionization detector (GC-FID) was used to determine BTEX compounds in aqueous samples. The effective parameters such as organic solvent, extraction time, microdroplet volume, salt effect and stirring speed were optimized. The performance of the proposed technique was evaluated for the determination of BTEX compounds in natural water samples. Under the optimal conditions the enrichment factors ranged from 142.68 to 312.13, linear range; 0.01-20 μg mL⁻¹, limits of detection; 0.8-7 ng mL⁻¹ for most analytes. Relative standard deviations for 0.2 μg mL⁻¹ of BTEX in water were in the range 1.81-2.47% (n = 5). The relative recoveries of BTEX from surface water at spiking level of 0.2 μg mL⁻¹ were in the range of 89.87-98.62%.     

Solid‐phase nanoextraction of polychlorinated biphenyls in water and their determination by gas chromatography with electron capture detector

A solid‐phase nanoextraction method has been developed for the extraction and preconcentration of polychlorinated biphenyls using carboxyl multiwalled carbon nanotubes as a solid nano‐sorbent. Parameters affecting extraction efficiency such as sorbent amount, desorption solvent type and volume, extraction time, pH, and salt content have been studied. Under optimized conditions, the correlation coefficient was up to 0.9989, the limits of detection was in the range of 1.4–3.5 ng/L, and limits of quantification was between 4.8 and 11.6 ng/L. The recoveries were in the range of 99–106% for different spiked analytes. The relative standard deviation for water samples spiked with two different spiking levels has been between 4 and 10%. The proposed sustainable method is rapid, easy to use, and small consumption of organic solvent for the detection and determination of trace levels of polychlorinated biphenyls in environmental waters.     

Determination of fungicides in water using liquid phase microextraction and gas chromatography with electron capture detection

A hollow fiber liquid phase microextraction (HF-LPME) and gas chromatographic-electron capture detection (GC-ECD) method for the determination of six fungicides (chlorothalonil, hexaconazole, penconazole, procymidone, tetraconazole, and vinclozolin) in 3 ml of water was described. The method used 3 μl of toluene as extraction solvent, 20 min extraction time with pH 4, stirring at 870 rpm, and no salt addition. The enrichment factors of this method were from 135 to 213. Limits of detection were in the range of 0.004-0.025 μg/l. The relative standard deviations (RSDs) at 0.1 and 5 μg/l of spiking levels were in the range 3-8%. Recoveries of six fungicides from farm water at a spiking level of 0.5 μg/l were between 90.7 and 97.6%. The method compared favorably with the traditional method in terms of the sample size, analysis time, and cost.     

Cyclodextrin‐functionalized reduced graphene oxide as a fiber coating material for the solid‐phase microextraction of some volatile aromatic compounds

A novel solid phase microextraction fiber was prepared for the first time by using a sol–gel technique with hydroxypropyl‐β‐cyclodextrin‐functionalized reduced graphene oxide as the fiber coating material. The results verified that the β‐cyclodextrin was successfully grafted onto the surface of reduced graphene oxide and the coating possessed a uniform folded and wrinkled structure. The performance of the solid phase microextraction fiber was evaluated by using it to extract nine volatile aromatic compounds from water samples before determination with gas chromatography and flame ionization detection. Some important experimental parameters that could affect the extraction efficiency such as the extraction time, extraction temperature, desorption temperature, desorption time, the volume of water sample solution, stirring rate, as well as ionic strength were optimized. The new method was validated to be effective for the trace analysis of some volatile aromatic compounds, with the limits of detection ranging from 2.0 to 8.0 ng/L. Single fiber repeatability and fiber‐to‐fiber reproducibility were in the range of 2.5–9.4 and 5.4–12.9%, respectively. The developed method was successfully applied to the analysis of three different water samples, and the recoveries of the method were in the range from 77.9 to 113.6% at spiking levels of 10, 100, and 1000 ng/L, respectively.     

固相萃取-大体积程序升温进样气相色谱-三重四极杆串联质谱测定饮用水中3种挥发性N-亚硝胺

建立了固相萃取大体积程序升温进样气相色谱-三重四极杆质谱联用（GC-QqQ-MS/MS）同时测定饮用水中N-亚硝基二甲胺、N-亚硝基甲基乙基胺及N-亚硝基二乙基胺的分析方法。用椰壳活性炭固相萃取小柱萃取水样中待测物组分，少量二氯甲烷洗脱、无水硫酸钠脱水，大体积程序升温进样，气相色谱-三重四极杆质谱联用仪进行多反应监测（MRM）模式检测，外标法定量。3种N-亚硝胺在1~50 ng/L范围内线性关系良好，相关系数（r²）均大于0.999，在饮用水中进行10、20和50 ng/L水平的添加，3种待测物平均加标回收率为94.8%~109%，相对标准偏差（RSD）为4.44%~8.10%（n=5），定量限（LOQ）为0.08~0.7 ng/L。该法灵敏、准确、简单、可靠，适用于饮用水中3种N-亚硝胺组分的痕量检测。     

Organotin Leachates in Drinking Water from Chlorinated Poly(vinyl chloride) (CPVC) Pipe

A solid-phase extraction method, using a phenyl-bonded silica sorbent, was developed for the isolation of mono- and di-methyltin, -butyltin and -octyltin from drinking water. Recoveries averaged 92% over two tested sample weights and spiking levels. Ethyl derivatives were made by Grignard reaction for determination by gas chromatography–atomic absorption spectrometry (GC–AAS). Static and repetitive extraction studies were conducted at 24 and 65°C. Butyltins rapidly leached into drinking water kept in chlorinated poly(vinyl chloride) (CVPC) pipe samples. Monobutyltin and dibutyltin levels reached 19.8 (13.4 as Sn) and 197 (100.4 as Sn) ng g⁻¹ respectively in water samples collected from CPVC pipe heated to 65°C. Butyltins were still leached from CPVC pipe after 20 repetitive extractions, suggesting that new CPVC water systems would contaminate water with organotins for some time after installation. © 1997 John Wiley & Sons, Ltd.     

Liquid chromatography/tandem mass spectrometry determination of organophosphorus flame retardants and plasticizers in drinking and surface waters

A liquid chromatography/electrospray ionization tandem mass spectrometric method for analyzing organophophorus flame retardants and plasticizers in drinking and environmental waters was developed. Five alkyl phosphates, three chlorinated alkyl phosphates, two aryl phosphate and triphenylphosphine oxide were selected for this study. These compounds were extracted from water samples by a hydrophilic polymeric solid-phase extraction cartridge. Accuracy and precision were evaluated analyzing 0.5 L of water samples spiked at concentrations of 10 and 100 ng/L for drinking water and at 300 and 1000 ng/L for river water. Except for trimethyl phosphate, analyte recoveries were better than 80%, and were not dependent on the type of aqueous matrix in which they were dissolved. At the spike levels considered, within-day precision was between 3 and 12% for tap water and between 4 and 14% for river water, and estimated method quantification limits ranged from 0.2 to 3.9 ng/L. A short survey conducted by analyzing some river water samples (River Tiber) ascertained the presence of ten organophosphorus compounds at concentration levels ranging from a few nanograms per liter to 323 ng/L for tris(2-butoxyethyl) phosphate.     

柚子皮生物炭质用于河水中苯系物的固相微萃取

苯、甲苯、乙苯和二甲苯(邻二甲苯、间二甲苯、对二甲苯)组成的苯系物(BTEX)是炼油厂和石化厂等工业园区普遍制造和排放的碳氢化合物,具有一定的毒性和致癌作用,对生态环境和人类健康造成极大威胁。研究以低成本、绿色且富含木质素和含氧官能团的柚子皮作为植物原料,在有限氧条件下采用程序升温热解法制备了柚子皮生物炭质吸附剂,通过N₂吸附-脱附等温线和孔径分布图对不同热解温度下制备的柚子皮生物炭质吸附剂的孔隙结构进行了考察。结果表明:在1000 ℃热解温度下制得的柚子皮生物炭质具有更高的比表面积(749.9 m²/g)、更大的孔体积(0.42 cm³/g)、更集中的孔径分布(2~3 nm)。将吸附剂通过溶胶-凝胶法(sol-gel)涂覆在铁丝上制成固相微萃取纤维,与气相色谱-火焰离子化检测器(GC-FID)相结合,对影响萃取和分离BTEX的条件进行优化,建立了用于BTEX检测的高灵敏度分析方法。方法具有检出限低(0.004~0.032 μg/L)、线性范围宽(1~100 μg/L)、线性关系好、萃取效率高(约为商品化涂层聚二甲基硅氧烷(7 μm)的2.9~18.3倍)等优势。此外,应用该方法已成功在河水样本中检测出了乙基苯(4.80 μg/L),邻二甲苯(3.00 μg/L)和对二甲苯、间二甲苯(2.46 μg/L)。最后将该方法应用于河水样本的加标试验中,得到了满意的回收率(75.7%~117.6%)。实验结果表明所建立的分析方法可实现对环境水样(河水)中BTEX的低成本、高灵敏度检测。     

液相色谱-串联质谱法快速测定饮用水中6种雌激素

建立了液相色谱-质谱法测定饮用水中17-β-雌二醇、17-α-雌二醇、17-α-乙炔雌二醇、己烷雌酚(HEX)、己烯雌酚(DES)和双烯雌酚(DE)6种雌激素的分析方法.样品经乙腈萃取,Oasis HLB柱富集净化后,采用液相色谱-质谱法测定.方法在5～100 μg/L范围内呈良好线性,相关系数为0.994～1.000...     

固相萃取-气相色谱法对河水与海水中36种农药残留的同时测定

应用固相萃取和气相色谱技术建立了河水和海水中36种常用农药(7种有机氯、11种有机磷、8种拟除虫菊酯、4种酰胺、2种苯胺和4种唑类杂环)的分析方法.采用Oasis HLB柱为水样富集萃取柱,考察了洗脱溶剂、上样体积、pH值和离子强度等因素对萃取效果的影响,采用无水硫酸钠和NH2柱进行除水和净化.目标农药在0.9 ～2 600 μg/L范围内线性良好;以PCB103为内标物,2,4,5,6-四氯间二甲苯、环氟菌胺和氟丙菊酯为替代物,实际河水、海水的加标回收率分别为62% ～124%、64% ～132%,相对标准偏差(n=3)分别为0.2% ～9.6%、0.1% ～12.2%;方法检出限为0.10 ～1.0 ng/L.方法快速、灵敏、准确,已成功应用于福建九龙江入海口表层水样的分析.     

Determination of organic compounds in water using dispersive liquid-liquid microextraction

A new microextraction technique termed dispersive liquid-liquid microextraction (DLLME) was developed. DLLME is a very simple and rapid method for extraction and preconcentration of organic compounds from water samples. In this method, the appropriate mixture of extraction solvent (8.0 microL C2Cl4) and disperser solvent (1.00 mL acetone) are injected into the aqueous sample (5.00 mL) by syringe, rapidly. Therefore, cloudy solution is formed. In fact, it is consisted of fine particles of extraction solvent which is dispersed entirely into aqueous phase. After centrifuging, the fine particles of extraction solvent are sedimented in the bottom of the conical test tube (5.0 +/- 0.2 microL). The performance of DLLME is illustrated with the determination of polycyclic aromatic hydrocarbons (PAHs) in water samples by using gas chromatography-flame ionization detection (GC-FID). Some important parameters, such as kind of extraction and disperser solvent and volume of them, and extraction time were investigated. Under the optimum conditions the enrichment factor ranged from 603 to 1113 and the recovery ranged from 60.3 to 111.3%. The linear range was 0.02-200 microg/L (four orders of magnitude) and limit of detection was 0.007-0.030 microg/L for most of analytes. The relative standard deviations (RSDs) for 2 microg/L of PAHs in water by using internal standard were in the range 1.4-10.2% (n = 5). The recoveries of PAHs from surface water at spiking level of 5.0 microg/L were 82.0-111.0%. The ability of DLLME technique in the extraction of other organic compounds such as organochlorine pesticides, organophosphorus pesticides and substituted benzene compounds (benzene, toluene, ethyl benzene, and xylenes) from water samples were studied. The advantages of DLLME method are simplicity of operation, rapidity, low cost, high recovery, and enrichment factor.