Kinetic spectrophotometric determination of thiocyanate based on its inhibitory effect on the oxidation of methyl red by bromate.

A kinetic spectrophotometric method for measuring thiocyanate is described. The proposed method is based on the inhibitory effect of thiocyanate on the oxidation of Methyl Red by bromate in the presence of nitrite, which was monitored at 520 nm. The variables affecting the rate of the reaction were investigated and the optimum conditions were established. Thiocyanate can be measured in the range of 0.05-1.1 microg ml(-1) with a detection limit of 0.025 microg ml(-1). This method has been used to determine trace thiocyanate in urine and tap water samples.     

Spectrophotometric determination of nitrite based on its catalytic effect on the oxidation of carminic acid by bromate

A highly sensitive and selective method is described for the determination of trace amounts of nitrite based on its effect on the oxidation of carminic acid with bromate. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of carminic acid at 490 nm after 3 min of mixing the reagents. The optimum reaction conditions were 1.8×10⁻¹ mol l⁻¹ H₂SO₄, 3.8×10⁻³ mol l⁻¹ KBrO₃, and 1.2×10⁻⁴ mol l⁻¹ carminic acid at 30°C. By using the recommended procedure, the calibration graph was linear from 0.2 to 14 ng ml⁻¹ of nitrite; the detection limit was 0.04 ng ml⁻¹; the R.S.D. for six replicate determinations of 6 ng ml⁻¹ was 1.7%. The method is mostly free from interference, especially from large amounts of nitrate and ammonium ions. The proposed method was applied to the determination of nitrite in rain and river water.     

Kinetic determination of thiocyanate on the basis of its catalytic effect on the oxidation of methylene blue with potassium bromate.

This study reports a sensitive kinetic spectrophotometric method for the determination of trace amounts of thiocyanate. In acidic solution, Methylene Blue (MB) is oxidized by bromate to form a colorless compound. The reaction is accelerated by trace amounts of thiocyanate and can be followed by measuring the absorbance at 664 nm. The absorbance of the reaction decreased with an increase in the reaction time. Under the optimum experimental conditions (0.56 M of sulfuric acid, 3.9 x 10(-5) M of MB, 3.0 x 10(-3) M of bromate, 180 s, 25 degrees C), thiocyanate can be determined in the range 5.0 - 180 ng/ml. The relative standard deviations (n = 8) are 2.81 and 1.43% for 10.0 and 150 ng/ml thiocyanate, respectively. The detection limit of this method is (3sigma) 3.8 ng/ml. This method was successfully applied to the determination of thiocyanate in real samples.     

Spectrophotometric determination of periodate, iodate and bromate mixtures based on their reaction with iodide.

A rapid, simple, precise and accurate method is proposed for the determination of ternary mixtures of periodate-iodate-bromate based on their reaction with iodide ion at different pH values. The absorbance was measured at 352 nm. Three sets of reaction conditions were developed. In the first set of conditions, only periodate reacted with iodide, but in the second set the periodate and iodate reacted with iodide and in the third set the three ions reacted with iodide during the first 3 min after initiation of the reaction. The method could be used for individual determinations of periodate, iodate and bromate in the concentration range of 0.05-8.0 microg/ml, 0.05-5.0 microg/ml and 0.2-12 microg/ml, respectively. The data were evaluated by simultaneous equations.     

流动注射化学发光法测定样品中的白藜芦醇

白藜芦醇具有抗菌、抗氧化、抗衰老、抗癌的作用[1-2],能阻碍血小板凝聚、调节血脂,防止低密度脂蛋白氧化,能抑制生物体内过氧化作用,能消除自由基。植物体内的白藜芦醇作为一种植物抗毒素而存在,其结构同己烯雌酚,有雌激素作用。白藜芦醇在虎杖,花生,葡萄,桑椹中含量最高,白藜     

Kinetic-spectrophotometric determination of trace amounts of As(III) based on its inhibitory effect on the redox reaction between bromate and hydrochloric acid

A simple, sensitive, rapid and reliable method has been developed for spectrophotometric determinations of As(III) in the presence of As(V) based on its inhibition effect on the redox reaction between bromate and hydrochloric acid. The decolorization of methyl orange by the reaction products was used to monitor the reaction spectrophotometrically at 525 nm. The method allows the determination of arsenic in the range of 6-1000 mug l(-1). The relative standard deviation for 10 determinations of 40 mug l(-1) of As(III) was 1.43% and the limit of detection, corresponding to a signal to noise ratio of three, was 3.4 mug l(-1). The proposed method was applied to the determination of As(III) in water samples with satisfactory results.     

Flow injection determination of formaldehyde by its catalytic effect on the oxidation of sulfonazo III by bromate with spectrophotometric detection.

A simple and sensitive flow injection method with spectrophotometric detection was developed for the determination of formaldehyde. The method is based on the catalytic effect of formaldehyde on the oxidation of sulfonazo III with bromate in acidic media. The decrease in absorbance of the reaction mixture was measured at 566 nm. The calibration graph was linear in the range of 0.005 to 2.80 microg ml(-1) formaldehyde at a rate of 38 +/- 4 samples h(-1). The limit of detection was 4 ng ml(-1). The relative standard deviations for ten replicate measurements of 0.20, 0.50 and 1.00 microg ml(-1) formaldehyde were 1.3, 0.8 and 0.7%, respectively. The method was applied to the determination of formaldehyde in river water, shampoo and melamine-formaldehyde resin.     

Spectrophotometric reaction rate method for the determination of osmium by its catalytic effect on the oxidation of gallocyanine by bromate

A simple kinetic spectrophotometric method was developed for the determination of osmium. The method is based on the catalytic effect of osmium as osmium tetroxide on the oxidation of gallocyanine by bromate at pH 7. The reaction is monitored spectrophotometrically by measuring the decreasing absorbance of gallocyanine at 620 nm by the fixed-time method. A detection limit of 0.01 ng/ml and linear calibration curve from 0.1 to 100 and from 100 to 1200 ng/ml Os(VIII) is reported. The relative standard deviation for 0.0100 microg/ml Os(VIII) is 0.8% (N = 10). The method is free from most interferences. Osmium in synthetic samples is determined by this method, with satisfactory results.     

Spectrophotometric determination of trace nitrite based on catalytic oxidation of thionine by potassium bromate

A kinetic method for the determination of trace nitrite (7 × 10^?9–1.2 × 10^?6 M) based on its catalytic effect on the reaction between potassium bromate and thionine in strongly acidic media is reported. The reaction is monitored spectrophotometrically by measuring the decreasing colour of thionine at 602 nm by the fixed-time method. At a given time of 5 min at 30°C, the detection limit is 2 × 10^?9 M (0.001 absorbance ratio, b = 1 cm) and the relative standard deviation for 1 × 10^?6 M nitrite is 2.6% (n = 6). The method is free from most interferences, especially from large amounts of nitrate. The procedure was successfully applied to the determination of trace nitrite in natural water and sausage samples without preconcentration and separation.     

Kinetic determination of trace amounts of thiosulfate based on its inhibitory effect

The sulfur containing ligand viz., thiosulfate is found to inhibit the Ag(I) catalyzed substitution of cyanide in hexacyanoferrate(II) by phenylhydrazine. The inhibitory effect of thiosulfate is attributed due to its tendency to form complexes with Ag(I), leading to the production of inhibitor-catalyst complexes. The reactions, followed spectrophotometrically in aqueous medium at 488 nm, was possible by the increase in absorbance of the cherry-red product, [Fe(CN)₅PhNHNH₂]^3- at pH 2.8 (±0.02), at 30 (±0.1) °C, and an ionic strength (μ) of 0.02 M (KNO₃). The linear calibration curves were obtained using the absorbance measured at different times (A_t) and thiosulfate concentrations under specified conditions. The calculated detection limit was 4.9 × 10^-7 M. The Michaelis-Menten constant (K_m) and equilibrium constants for the formation of complexes between catalyst and inhibitor (K_CI), and the catalyst and substrate (K_S) were computed from the kinetic data. A general mechanistic scheme is proposed for this reaction.     

Kinetic spectrophotometric determination of traces of molybdenum(VI) by its inhibitory effect on the oxidation of 4-hydroxycoumarine by potassium permanganate.

The present paper describes a simple, selective and sensitive kinetic method for the determination of trace amounts of molybdenum(VI) based on its inhibitory effect on the reaction oxidation of 4-hydroxycoumarine by KMnO(4) in the presence of hydrochloric acid, at pH 1.75 at 25 degrees C. The rate of the indicator reaction was followed spectrophotometrically by measuring the decrease in the absorbance of KMnO(4) at 525 nm. The development method includes optimization of the reagent concentration and temperature. The calibration graph was linear in the range of concentrations from 20 to 200 ng/cm(3) of molybdenum(VI). The probable relative error was in the interval 3.10 - 10.52% for the concentration range of 200 - 20 ng/cm(3) molybdenum(VI), respectively. The interference effects of the foreign ions were determined to assess the selectivity of the method. The developed method was found to have relatively good selectivity, sensitivity, simplicity and rapidity. The proposed method was applied to the determination of molybdenum(VI) in a particular type of steel and alloy (hastelloy).     

Kinetic spectrophotometric determination of rutin by its inhibitory effect on the oxidation of amaranth by potassium periodate

A novel kinetic spectrophotometric method is described for the determination of rutin. The method is based on the inhibitory effect of rutin on the oxidation reaction of amaranth by potassium periodate in acidic media at 100 degrees C. The linear range for the determination of rutin is 0.02 - 0.50 microg/ml, and the detection limit is 0.014 microg/ml. The method has been successfully applied to the determination of rutin in medicine of rutin tablet and traditional Chinese medicine.     

Indirect kinetic determination of As(III) based on its accelerating effect on the Os(VIII)-catalysed reaction between iodide and bromate in a micellar medium

Summary An indirect kinetic-photometric method for the determination of As(III) over the range 7–300 ng ml^–1 is proposed. It is based on the accelerating effect of this ion on the Os(VIII)-catalysed reaction between iodide and bromate, which is monitored via the triiodide formed. Arsenic(III) acts as an accelerator only in a very rapid initial step of the reaction and the rate processes occurring in the system after this step do not depend directly on the As(III) concentration. Therefore, the contribution of this ion to the reaction must be measured after its accelerating effect has cancelled. Dodecyltrimethyl-ammonium bromide (DTAB) micelles accelerate the reaction, and hence increase the sensitivity and selectivity of the determination of As(III) compared to reactions taking place in an aqueous medium. Some observations on the mechanism via which DTAB acts on the reaction are reported. The role of micellar media in catalytic kinetic methods is discussed.     

KBrO3-溴酚蓝体系催化光度法测定微量甲醛

在室温及H2SO4介质中, 基于甲醛对KBrO3氧化溴酚蓝有显著的促进作用, 建立了测定微量甲醛的动力学催化光度法. 方法的线性范围为0.70～11.0 μg/mL, 检出限为0.015 μg/mL. 用该方法对某实验室废水中甲醛含量进行了测定, 结果满意.     

Kinetic determination of traces of iodide by its catalytic effect on oxidation of sodium pyrogallol-5-sulfonate by hydrogen peroxide.

The kinetic method is based on a catalytic effect on the oxidation of sodium pyrogallol-5-sulfonate by hydrogenperoxide. The reaction is followed spectrophotometrically at 436.8 nm. The kinetic parameters of the reaction are reported and a rate equation is suggested. The calibration graph is linear in the range 10-200 ng cm(-3). The effects of certain foreign ions upon the reaction rate were determined for the assessment of the selectivity of the method. This method has high sensitivity and good selectivity when anions are concerned as well. That is why it can be successfully applied to determination of iodide in real samples (mineral water and soil) directly after the elimination of cations, which interfere. The method was applied to determine iodide in natural waters and soil.     

Kinetic spectrophotometric method for trace determination of thiocyanate based on its inhibitory effect

A kinetic spectrophotometric method for the determination of thiocyanate, based on its inhibitory effect on silver(I) catalyzed substitution of cyanide ion, by phenylhydrazine in hexacyanoferrate(II) is described. Thiocyanate ions form strong complexes with silver(I) catalyst which is used as the basis for its determination at trace level. The progress of reaction was monitored, spectrophotometrically, at 488 nm (λ_max of [Fe(CN)₅PhNHNH₂]^3?, complex) under the optimum reaction conditions at: 2.5 × 10^?3 M [Fe(CN)₆]^4?, 1.0 × 10^?3 M [PhNHNH₂], 8.0 × 10^?7 M [Ag⁺], pH 2.8 ± 0.02, ionic strength (μ) 0.02 M (KNO₃) and temperature 30 ± 0.1 °C. A linear relationship obtained between absorbance (measured at 488 nm at different times) and inhibitor concentration, under specified conditions, has been used for the determination of [thiocyanate] in the range of 0.8–8.0 × 10^?8 M with a detection limit of 2 × 10^?9 M. The standard deviation and percentage error have been calculated and reported with each datum. A most plausible mechanistic scheme has been proposed for the reaction. The values of equilibrium constants for complex formation between catalyst–inhibitor (K_CI), catalyst–substrate (K_s) and Michaelis–Menten constant (K_m) have been computed from the kinetic data. The influence of possible interference by major cations and anions on the determination of thiocyanate and their limits has been investigated.     

Kinetic-spectrophotometric determination of traces of vanadium(V) by its catalytic effect on the oxidation of 1,4-dihydroxyphthalimide dioxime with bromate

A kinetic-spectrophotometric method for the determination of trace amounts of vanadium(V) is described. It is based on the catalytic action of this ion on the oxidation of 1,4-dihydroxyphthalimide dioxime by bromate, which yields a red-violet product in acidic medium. The reaction is followed spectrophotometrically by measuring the rate of change in absorbance at 500 nm and 30°C. Using several kinetic methods (tangent, fixed-time and fixed-absorbance), vanadium(V) in the range 10–400 ng ml^?1 can be determined. The proposed methods are hardly subject to interferences. The tangent method was used for the determination of vanadium in atmospheric particulate matter, human serum and synthetic mixtures. The kinetic parameters of the catalysed and uncatalysed reactions are reported.     

Flow-injection spectrophotometric determination of paraoxon by its inhibitory effect on the enzyme acetylcholinesterase.

A spectrophotometric enzymatic flow injection (FI) system for the determination of diethyl-p-nitrophenylphosphate (paraoxon) is proposed. The method was based on the determination of the acetic acid formed by the enzymatic reaction of the acetylcholinesterase, immobilized on glass beads, with the substrate acetylcholine. The acetic acid formed permeates through a PTFE membrane and is received by a solution (pH 7.0) containing the acid-base indicator Bromocresol Purple (B.C.P.), leading to a pH change and therefore to a color change. The variation of the absorbance of the solution is detected spectrophotometrically at 400 nm. The determination of paraoxon is related to its inhibitory action on the enzyme. Therefore the analytical signal is the difference between the signal that corresponds to the free and the one that corresponds to the inhibited enzyme, considering a fixed acetylcholine concentration. The correlation between the peak height and paraoxon concentration at a given acetylcholine concentration is linear in the range from 5.0 x 10(-7) mol L-1 to 5.0 x 10(-5) mol L-1 (r = 0.998) of paraoxon, with a relative estimated standard deviation (R.S.D.) of +/- 1.7% (n = 10) considering a solution containing 5.0 x 10(-6) mol L-1 of paraoxon and a solution containing 5.0 x 10(-3) mol L-1 of acetylcholine. Therefore, the quantitative limit detection is about 2.5 x 10(-7) of paraoxon (3 sigma). A 1,1'-trimethylene-bis(4-formylpyridinium bromide)dioxime (TMB-4) solution was used to reactivate the enzyme.     

溴酸钾氧化酸性铬深蓝动力学光度法测定痕量亚硝酸根

亚硝酸根是环境中重要的污染物之一,是水质、环境、食品等检测的一个重要项目。催化动力学方法测定痕量亚硝酸根已有较多的报道^[1-6],但未见利用酸性铬深蓝指示物质的报道,酸性铬深蓝是一种配位滴定的指示剂。作者发现在稀疏酸介质中,亚硝酸根对溴酸钾氧化酸性铬深蓝褪色反应有灵敏的催化作用,并研究了该指示反应的动力学条件,建立了催化光度法测定亚硝酸根的新方法。该方法灵敏、简便,可用于水、蔬菜中亚硝根的测定。