毛细管区带电泳同时分离苯二酚和硝基苯酚位置异构体

运用毛细管区带电泳模式,通过在缓冲溶液中添加有机溶剂成功地分离了邻、间、对苯二酚和邻、间、对硝基苯酚两组位置异构体。研究了缓冲溶液种类、浓度、pH值、电泳电压、温度、进样时间及有机溶剂等因素对分离的影响,得出了6种样品的标准曲线、线性范围及加样回收率。在优化条件下,10min内实现了上述6种酚类化合物的分离。该方法简便、快速、重现性好。     

毛细管电泳-间接化学发光法检测染发剂中苯二酚异构体和苯酚

根据某些酚类化合物在碱性条件下具有能猝灭鲁米诺-铁氰化钾体系化学发光信号的特性,建立了毛细管电泳-间接化学发光分离检测苯二酚异构体和苯酚的新方法.电泳缓冲溶液选用7.5 mmol/L Na2B4O7-2.5 mmol/L Na2HPO4.在优化的化学发光和电泳条件下,对苯二酚、间苯二酚、邻苯二酚和苯酚在10 min内可直接实现分离,其检出限(S/N=3)分别为2.9×10-8 mol/L、3.7×10-7 mol/L、8.4×10-8 mol/L和4.4×10-6 mol/L;相对标准偏差(RSD)为2.5%～4.8%(n=5).通过对不同染发剂实际样品进行分离分析研究,证明该方法可以用于实际染发剂样品的分析测定,结果令人满意.     

毛细管区带电泳分离硝基苯胺位置异构体的研究

采用毛细管区带电泳(CZE)技术,在极端pH值条件下分离了邻、间、对硝基苯胺位置异构体;研究了背景缓冲溶液、pH值、分离电压、温度及进样时间等因素对分离的影响,得出了3种样品的标准曲线、线性范围及加样回收率。在选定的实验条件下15min内实现了上述3种苯胺类化合物的分离。该方法快速,准确,重现性好。     

苯二酚位置异构体的毛细管电泳-方波安培分离检测

邻苯二酚(儿茶酚)、间苯二酚(雷锁辛及树脂酚)和对苯二酚(氢醌)是苯二酚的3种位置异构体,它们均是重要的有机合成中间体,被广泛应用于化工材料、农药、化妆品和医药等领域,其中儿茶酚是神经递质代谢过程的中间体.因此,建立简便、灵敏而快速的苯二酚异构体的分离检测方法具有重要的意义.     

人工神经网络法同时测定苯二酚异构体

研究了人工神经网络法与紫外分光光度分析相结合，用于邻苯二酚、间苯二酚、对苯二酚异构体的含量测定。本研究采用人工神经网络法，直接对苯二酚异构体混合液的紫外吸收光谱数据进行预测，不需预先分离，即可得到各异构体的浓度。     

荧光光度法测定苯二酚异构体中的邻苯二酚

用荧光光度法测定苯二酚异构体中的邻苯二酚。在硼砂缓冲溶液介质中,氰乙酰胺能与邻苯二酚生成荧光物质,在最佳实验条件下,邻苯二酚的浓度在1×10~(-8)～3×10~(-6)mol/L范围内与荧光强度呈线性关系,检出限为6.2×10~(-9)mol/L,对苯二酚和间苯二酚不干扰测定。     

毛细管电泳法分析维甲酸异构体

采用毛细管电泳分析方法对维甲酸异构体进行了分离。比较了区带电泳和胶束电动色谱两种模式对维甲酸异构体的分离效果。考察了缓冲液组成、pH值、乙腈含量以及十二烷基硫酸钠(SDS)浓度等对分离的影响。采用胶束电动色谱法可完全分离13-顺-和全反式-维甲酸,最佳的缓冲溶液为(20 mmol/L Tris-H3BO3(pH 8.5)-25 mmol/L SDS)-乙腈(体积比为80∶20)。该法首次应用于加标血浆中的维甲酸分析,获得了较好的结果。     

苯二酚异构体双电荷离子和单电荷离子的动能谱研究

本文利用质量分析离子动能谱(MIKES)、碰撞诱导解离(CID)技术和电子捕获诱导解离(ECID)技术, 研究了邻、间、对苯二酚分子在电子轰击质谱(EIMS)中产生的双电荷离子[C6H6O2]^2^+, [C6H4O]^2^+和单电荷离子[C6H6O2]^+。根据测定的电荷分离反应动能释放值T和由此计算出的两电荷间距R, 推测出过渡态的结构。有趣的是, 可利用单电荷离子[C6H6O2]^+的MIKES/CID谱区分苯二酚异构体。     

高效毛细管区带电泳二肽类组分迁移行为的研究

本文考察了影响二肽类组分在高效毛细管区带电泳上迁移时间重复性的因素,提出了采用相对指标来作为高效毛细管区带电泳峰定性的依据,并考察了电流以及柱温对迁移时间和相对迁移时间的影响,发现在恒压lgt~m与T^-1有良好的线性关系;并从迁移时间的基本方程定量地解释了上述的变化规律.本文还发现,采用相对迁移时间指标后可以有效地消除操作电流以及柱温对迁移时间所引起的波动,是毛细管区带电泳的一个特征参数.     

Simultaneous determination of dihydroxybenzene and phenylenediamine positional isomers using capillary zone electrophoresis coupled with amperometric detection

In general capillary zone electrophoresis (CZE) separation models, o‐, m‐, and p‐phenylenediamine isomers can be separated in a weak acidic running buffer for their pK_a values being 4.52, 5.64, 6.04, respectively, while o‐, m‐, and p‐dihydroxybenzene isomers can be separated in a weak basic buffer for their pK_a values being 9.40, 9.40 and 10.04, respectively. So, it is hard to find a suitable running buffer at a fixed pH in normal CZE for simultaneous separation of these two groups of positional isomers. In this paper, a novel method based on alternately running two different pH buffers in CZE coupled with amperometric detection (CZE‐AD) was designed to simultaneously determine these two groups of positional isomers. It is found that when two different pH running buffers were employed alternately under appropriate order and time, the six analytes could be separated perfectly in less than 20 min and the detection limits were as low as 10^–7 mol/L. Furthermore, the effects of working electrode potential, pH and concentration of running buffer, separation voltage and injection time on CZE–AD were investigated. Experimental results demonstrated that the introduced method was practical to simultaneously determine two groups of positional isomers with different pK_a and had some advantages of high sensitivity, good repeatability and small sample requirement.     

Separation and migration behavior of positional and structural naphthalenesulfonate isomers by cyclodextrin-mediated capillary electrophoresis

The effects of the type of buffer system, buffer pH, the polarity of electrode, and both the type and the concentration of cyclodextrins (CDs) on the separation and migration behavior of seven positional and structural naphthalenesulfonate isomers in CD-mediated capillary electrophoresis were systematically investigated. The most effective separation conditions were to use 20 mM phosphate buffer with beta-CD at pH 3.0, while the polarity of the electrodes were reversed across the capillary. Under such conditions, these isomers can be separated in 10 min. The results also indicate that the interactions of naphthalenesulfonate derivatives with CDs are strongly affected by the position of the substituent(s) on the aromatic ring. The inclusion complex formation constants of these compounds were evaluated to improve our understanding of the interaction between the naphthalenesulfonate derivatives and CDs. Moreover, the formation constants of naphthalene-2-sulfonate to beta-CD agreed closely with the data in the literature obtained by a spectrophotometric method and by CE methods in various pH buffers.     

The formation of cucurbit[n]uril (n = 6, 7) complexes with amino compounds in aqueous formic acid studied by capillary electrophoresis

For analytes involved in dynamic equilibrium processes, capillary electrophoresis is a powerful method of determining binding constants. In this work, the complex formation between cucurbit[n]uril (CB[n] n = 6, 7) and some amino compounds was studied by capillary electrophoresis in aqueous formic acid (65% v/v). Four groups of positional and structural isomers (o, m, p-methylanilines; m, p-nitroanilines; benzidine and o-tolidine; alpha, beta-naphthylamines and 1,5-diaminonaphthalene) were selected as model compounds for study of their host-guest inclusion complexation. The interactions between CB[n] (n = 6, 7) and the model compounds were also investigated using a molecular modeling method. The results indicate that the interactions of the compounds with CB[n] (n = 6, 7) are strongly affected by the position of the substituent(s) on the aromatic ring and the ion-dipole interaction between guest molecule and CB. Furthermore, the type and the concentration of CBs on the separation and migration behavior of the amino compounds were also studied.     

Rapid separation of acetophenone and its monohydroxy isomers by capillary electrophoresis

This work describes the development of a capillary electrophoresis(CE)method for the simultaneous separation of acetophenone(AP),2-hydroxyacetophenone(2-HAP),3-hydroxyacetophenone(3-HAP)and 4-hydroxyacetophenone(4-HAP)in synthetic mixtures using 10 mmol/L of sodium tetraborate buffer(pH 9.5).The aim of this work is to demonstrate the effectiveness of CE to separate AP and its monohydroxy isomers and to defne how the separations are affected by buffers,buffer pH,sample matrices and separation voltage.This method was successfully used for the trace level separation and determination of 2-HAP,3-HAP and 4-HAP in synthetic mixture and 4-HAP in spiked plasma samples.     

Investigation of unexpected migration behavior of adenosine in capillary zone electrophoresis

Summary The capillary zone electrophoresis of two common nucleosides, adenosine and inosine, was investigated. Both compounds were resolved in a 0.1 M sodium phosphate buffer, pH 7.5. Contrary to expectations, adenosine behaved at this pH— 5 pH units lower than the literature pK_a— as a negative ion, migrating behind mesityloxide (neutral marker) when working in normal polarity mode. To confirm the migration order, peaks were identified from absorption maxima, by high-speed scanning detector. The change in electrophoretic mobility with pH was investigated for the nucleosides, and 10 other background electrolytes were tried to match the separation capabilities of the sodium phosphate buffer. Most inorganic buffers showed comparable separation, while organic, Good-type buffers lacked selectivity.     

The separation and determination of nitrophenol isomers by high-performance capillary zone electrophoresis

o-Nitrophenol, m-nitrophenol, and p-nitrophenol could well be separated by capillary zone electrophoresis (CZE) by only adjusting the run buffer with methanol. Efficiency up to 10⁵ theoretical plates per meter was achieved. The effects of several important factors were investigated to find optimum conditions. The linear range, regression equation, and the recovery were given. This method possessed the advantages of simplicity, rapidity, and good reproducibility; it can be developed for the separation of practical samples in environment analysis.     

Capillary electrophoresis chemiluminescence assay of naphthol isomers in human urine and river water using Ni(IV) complex‐luminol system

A capillary electrophoresis method involving online indirect chemiluminescence (CL) detection was used to determine naphthol (NAP) isomers. The method was based on the quenching effect of 1‐ and 2‐NAP on a new CL reaction of luminol with Ni(IV) complex in an alkaline medium. Separation was conducted with a 25.0 mM sodium borate buffer containing 0.8 mmol/L luminol. Under optimized conditions, 1‐ and 2‐NAP were baseline separated and detected in less than 8 min. The limits of detection of 1‐ and 2‐NAP were 3.1 and 2.7 μg/L, respectively (S/N = 3), with a linear range of 4.0–80.0 μg/L (r > 0.995). Analysis of real samples demonstrated that the spiked recoveries were in the range of 89.2–107.5% (n = 3). The proposed method was successfully used to determine 1‐ and 2‐NAP contents in three environmental water samples and 14 human urine samples. No derivatization or tedious pretreatment was required in the analysis. The proposed method is a potential approach for routine tests of naphthol isomers in a facile CE–CL system.     

Separation and determination of nitroaniline isomers by capillary zone electrophoresis with amperometric detection

In this paper, capillary zone electrophoresis with amperometric detection (CZE-AD) was firstly applied to the simultaneous separation and determination of nitroaniline positional isomers. The three analytes could be perfectly analyzed by using the buffer of extreme pH. The effects of several important factors were investigated to find optimum conditions. A carbon-disk electrode was used as working electrode. The optimal conditions were 40 mmol/L tartaric acid-sodium tartrate (pH 1.2) as running buffer, 17 kV as separation voltage and 1.10 V (versus saturated calomel reference electrode, SCE) as detection potential. Under the optimum conditions, o-, m- and p-nitroaniline were separated successfully and good linearity, reproducibility and recovery results were obtained. The detection limit for m-nitroaniline was as low as at 9.06 × 10⁻⁹ mol/L. This proposed method demonstrated long-term stability and reproducibility with relative standard deviations of less than 1.8% for migration time and 1.1% for peak areas. The utility of this method was demonstrated by monitoring dyestuff wastewater and the assay results were satisfactory.