Ruthenium(II) complexes of azoimine and α-diimine ligands: synthesis,spectroscopic and electrochemical properties,crystal structures and DFT calculations

Five octahedral ruthenium(II) complexes with azoimine–quinoline (Azo) and α-diimine (L) ligands having the general formula [Ru^II(L)(Azo)Cl](PF₆) (1–5) {Azo: PhN=NC(COMe)=NC₉H₆N, L = 4,4′-dimethoxy-2,2′-bipyridine (dmeb) (1), 4,4′-di-tertbutyl-2,2′-bipyridine (dtb) (2), 1,10-phenanthroline (phen) (3), 5-chlorophenanthroline (Clphen) (4), or 3,4,7,8-tetramethyl-1,10-phenanthroline (tmphen) (5)} were prepared by stepwise addition of the tridentate azoimine (H₂Azo) and α-diimine (L) pro-ligands to RuCl₃ in refluxing EtOH. The tridentate azoimine–quinoline ligands coordinate to ruthenium via the Azo-N′, N′-imine and N″-quinolone nitrogen atoms. The spectroscopic properties (IR, UV/Vis, ¹H, ¹³C and ¹⁹F NMR) and electrochemical behavior of complexes 1–5 and the X-ray crystal structures of complexes 2 and 3 are presented. The coordination of Ru(II) to these strong π-acceptor ligands (Azo and L) results in a large anodic shift for the Ru(III/II) couples of 1.63–1.72 V versus NHE. The electronic spectra in MeCN and IR spectra in CH₂Cl₂ for complex 3 in its oxidized 3 ⁺ and reduced 3 ^? forms were investigated. The calculated absorption spectrum of 3 in MeCN was used to assign the UV–Vis absorption bands.     

Ruthenium(II) complexes containing 2,9-dimethyl-1,10-phenanthroline and 4,4′-dimethyl-2,2′-bipyridine as ancillary ligands: synthesis,characterization and DNA-binding

Two new Ruthenium (II) polypyridyl complexes [Ru(dmp)₂(ipbp)](ClO₄)₂ (1) (dmp = 2,9-dimethyl-1,10-phenanthroline, ipbp = 3-(1H-imidazo[4,5-f][1,10]phenanthrolin-2-yl)-4H-1-banzopyran-2-one) and [Ru(dmb)₂(ipbp)](ClO₄)₂ (2) (dmb = 4,4′-dimethyl-2,2′-bipyridine) have been synthesized and characterized by elemental analysis, FAB-MS, ES-MS and ¹H NMR and cyclic voltammetric methods. The DNA-binding behaviors of these complexes were investigated by spectroscopic titration, viscosity measurements, and thermal denaturation. Absorption titration and thermal denaturation studies reveal that these complexes are moderately strong binders of calf thymus DNA (CT-DNA). Viscosity measurements show that the complexes 1 and 2 interact with CT-DNA by intercalative mode. The DNA-binding affinity of the complex 2 is larger than that of complex 1.     

pH-dependent syntheses and crystal structures, characterizations, and DFT calculations of complexes with 2,2′-biimidazole and terephthalic acid ligands

The divalent transition metal complexes [Zn(L)₂(H₂O)₂](Tere) (I), [Cd(L)₂(H₂O)₂](Tere]) (II) and [Cd(L)₂(HTere)₂] (III) (L = 2,2’-biimidazole, Tere = terephthalate) have been synthesized under hydrothermal conditions and characterized by elemental analysis, IR spectrum, thermal analysis and single-crystal X-ray diffraction analysis. Complexes II and III have the same starting materials but possess different frame-works and are prepared from H₂Biim and H₂Tere under hydrothermal conditions with different pH values. The crystal structures show I and II have the same coordination circumstances and are coordinated by two H₂O molecules and two neutral bidentate 2,2′-biimidazole ligands. The terephthalate acts as the counter anion. In contrast, complex III contains protonated carboxylate groups coordinated to the metal centre to give neutral species. Furthermore, based on the optimized structures, molecular frontier orbitals, Mulliken charges and IR spetra of complex I and III are investigated by density functional theory. Calculated results show that the energy gap (ΔE _L-H) between HOMO and LUMO of complex III is bigger than that of I. It is revealed that complex III is more stable, and this calculated estimation corresponds with experimental analysis of TGA curves.     

Kinetic analysis of the mechanochemical syntheses of dialkyl 2,2′-bipyridyl-4,4′-dicarboxylate complexes of palladium

Kinetic models for the ‘molecular’ mechanochemical syntheses of α- and β-dialkyl 2,2′-bipyridyl-4,4′-dicarboxylate complexes of palladium (PdLⁿI₂, where n specifies the number of carbons in the alkyl chain of the ligand and α and β refer to the substitution of the alkyl chain) are explored. The Johnson–Mehl–Avrami–Yerofeev–Kolmogrov (JMAYK) model was determined to best fit the data obtained via ¹H NMR spectroscopic analysis of the reaction mixtures over time. A rate enhancement, and corresponding increase in the Avrami exponent, was observed when the complex formed was liquid crystalline at milling temperatures.     

Ruthenium(II) complexes of 2-(2′-pyridyl)naphthoimidazole: synthesis,characterization and DNA-binding studies

The perchlorate salts of two new ruthenium(II) complexes incorporating 2-(2′-pyridyl)naphthoimidazole are synthesized in good yield. Complexes [Ru(phen)₂(PYNI)]²⁺ (phen = 1,10-phenanthroline) 1 and [Ru(dmp)₂(PYNI)]²⁺ (dmp = 2,9-dimethyl-1,10-phenanthroline, PYNI = 2-(2′-pyridyl)naphthoimidazole) 2 are fully characterized by elemental analysis, FAB-MS, ES-MS, ¹H NMR and cyclic voltammetric methods. The DNA-binding behavior of the complexes have been studied by spectroscopic titration, viscosity measurements and thermal denaturation. Absorption titration and thermal denaturation studies reveal that these complexes are moderately strong binders of calf-thymus DNA (CT-DNA), with their binding constants spanning the range (2.73–5.35) × 10⁴ M^?1. The experimental results show that 1 interacts with calf thymus DNA (CT-DNA) by intercalative mode, while 2 binds to CT-DNA by partial intercalation.     

Four transition metal complexes constructed with mixed mercaptotetrazole and 4,4′-bipyridine ligands

Based on 5-mercapto-1H-tetrazole-1-methanesulfonic acid disodium salt (Na₂mtms) and 4,4′-bipyridine (bpy) as ligands, four new transition metal complexes, namely {[Cd₂(mtms)(bpy)₂(OAc)₂]·H₂O} _n (1), {[Cd(mtms)(bpy)₂(H₂O)₂]₂·bpy·4H₂O} _n (2), {[Zn₂(μ ₂-OH)(mtms)(bpy)₃(H₂O)]·ClO₄·H₂O} _n (3), and {[Co(mtms)₂(bpy)(H₂O)₂]·[Co(bpy)₂(H₂O)₄]·H₂O} _n (4), have been synthesized and characterized by single-crystal X-ray diffraction. Complex 1 features a pillared-layer coordination architecture linked by acetate, mtms, and bridging bpy ligands. Complex 2 has a 1D polymeric structure with [Cd(mtms)(bpy)₂(H₂O)₂] as the repeating unit; these infinite chains are further connected into a 3D supramolecular framework through π–π stacking of bpy ligands. In complex 3, the mtms ligand combined with μ ₂-OH bridges two Zn atoms to form a dimer structure, which is different from that of complex 2. Complex 4 shows a 3D supramolecular network containing infinite [Co(mtms)₂(bpy)(H₂O)₂]^2? anionic chains and free [Co(bpy)₂(H₂O)₄]²⁺ cationic components. The luminescence properties of 1 and 2 and the electrochemical properties of 3 are reported.     

Thermochemical studies of 4-tert-butylbiphenyl and 4,4′-di-tert-butylbiphenyl

The standard massic energies of compounds of 4-tert-butylbiphenyl and 4,4′-di-tert-butylbiphenyl were measured at T = 298.15 K by static-bomb combustion calorimetry. The standard enthalpies of vaporization, fusion and sublimation were measured in a Calvet microcalorimeter, or by differential scanning calorimetry. The standard molar enthalpies of formation in the condensed and gaseous states were obtained from these data. The tert-butyl group increments for the substitution of one hydrogen atom in a position “4” in biphenyl molecule were calculated.     

Characterization and thermal kinetic studies on charge-transfer complexes of 4,4′-bipyridine with benzoquinone derivatives

4,4′-Bipyridine belong to an important class of compounds with wide applications in different fields and since the formation charge transfer compounds give opportunity to improve the physical and chemical properties of different donors so charge transfer compounds of 4,4′-bipyridine (Bpy) with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), 2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone [chloranilic acid] (CHA) and 2,3,5,6-tetrachloro-1,4-benzoquinone [choloranil] (CHL) were studied. The stoichiometries of the reactions were determined from photometric titration methods. Although the thermodynamic parameters [Gibbs free energy (ΔG°), enthalpy (ΔH°), and entropy change (ΔS°)] were calculated. The thermal decomposition of the complexes follows first order kinetics and thermodynamic parameters of the decomposition were calculated. The structural morphology was investigated by scanning electron microscopy (SEM) and Transmission Electron Microscopy (TEM) and show that these molecules are of nanosize.     

Structural and solution studies of new cadmium(II) complexes with 2,2′-diamino-4,4′-bithiazole

Two new Cd(II) complexes, [Cd(DABT)(CH₃COO)₂] (1) and [Cd(DABT)(NO₃)₂] (2), DABT = 2,2′-diamino-4,4′-bithiazole, have been synthesized and characterized by single crystal X-ray crystallography. In 1, each cadmium is chelated by two nitrogens of one DABT and four oxygens of acetate, whereas 2 is a dinuclear complex and there are two Cd's with eight and six coordination: Cd₁O₆N₂ and Cd₂O₄N₂ units. The counter ion effect of the complex formation reaction between cadmium(II) nitrate and acetate with DABT has been studied by spectroscopy. The formation constants of the 1 : 1 and 1 : 2 (metal ion to ligand) complexes were evaluated by computer fitting of the absorbance–mole ratio data.     

Metal complexes of tetradentate azo-dye ligand derived from 4,4′-oxydianiline: Preparation,structural investigation,biological evaluation and MOE studies

The Cr (III), Mn (II), Fe (III), Co (II), Ni (II), Cu (II) and Cd (II) complexes were prepared by reaction of its metal chlorides with new azo-dye ligand (H₂L). The ligand derived from 4,4′-oxydianiline and 2-amino-4-chlorophenol was synthesized in a 1:2 molar ratio. The structure of the ligand and its metal complexes was investigated using different tools such as elemental analysis (C, H, N and M), molar conductivity, IR, UV–vis, ¹H-NMR, mass spectrometry and thermogravimetric and differential thermogravimetric studies. The data showed that the ligand acted as a N,N,O,O-binegative tetradentate ligand. All metal complexes had a octahedral structure as depicted by spectral and elemental analyses. The conductivity data showed the electrolytic nature of the Cr (III) and Fe (III) complexes while the other complexes were nonelectrolytes. Thermal analysis studies showed the decomposition of the complexes in four to five steps with the weight loss of hydrated water in the first decomposition step followed by the coordinated water and ligand molecules. Biological activity was tested for the prepared compounds against four bacterial species (Bacillus subtilis, Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa) and against two fungal species (Aspergillus fumigatus and Candida albicans). Also, all complexes were screened for anticancer activities against a breast cancer (MCF-7) cell line. The [Co(L)(H₂O)₂] complex showed the lowest IC₅₀ value. Molecular docking is a key tool in computer drug design. Therefore, investigation of protein receptors and ligand interaction plays a vital role in the design of structurally based drugs. As a result, docking studies were investigated for H₂L ligand, [Mn(L)(H₂O)₂] and [Ni(L)(H₂O)₂] complexes with 5KBC, 3V7B and 4G9M receptors.     

Synthesis of dinuclear group 6 metal carbonyl complexes bridged by 4,4′-bipyrazole ligands

A series of dinuclear group 6 metal carbonyl complexes containing 4,4-bipyrazole ligands [(CO)₅M (-dpz)M(CO)₅)] have been synthesized by the photochemical reaction of 4,4-bipyrazoles with M(CO)₆ [M = Cr, Mo or W; dpz = 4,4-bis-3,5-dimethylpyrazole; 4,4-methylenebis(3,5-dimethylpyrazole)], and characterized by elemental analyses, i.r. and ¹H-n.m.r. spectra. Their electrochemical behavior, investigated by cyclic voltammetry, indicates that all complexes exhibit one quasi-reversible redox peak owing to the presence of two equivalent M(CO)₅ fragments. The crystal structure of (CO)₅W(-dpz)W(CO)₅ [dpz = 4,4-methylenebis(3,5-dimethylpyrazole)] determined by X-ray diffraction, indicates that two W(CO)₅ units are linked by the bridging bidentate ligand, and are located in a mutually cis-position. The molecules form a two-dimensional double-layer sheet by intermolecular hydrogen bonding interactions between the N—H groups and the oxygen atoms of metal carbonyls in the solid state.     

Synthesis, structure, and luminescent properties of three silver(I) complexes with organic carboxylic acid and 4,4′-bipyridine-like ligands

The reactions of AgNO₃ with combinations of 1,2-bis(4-pyridyl)ethane(bpa)/4,4′-bipyridine (bpy), 4,4′-stilbenedicarboxylic acid (H₂sda)/2,2′-diphenylaminedicarboxylic acid (H₂dpadc)/2,6-naphthalenedicarboxylic acid (H₂ndc) in aqueous alcohol/ammonia at room temperature produce block-like crystals of [Ag₂(bpa)_1.5(sda)_0.5](sda)_0.5·7H₂O, [Ag₂(bpa)₂(H₂O)₃](dpadc), [Ag₂(bpy)₂](ndc)·4H₂O. All three complexes consist of 1D infinite silver–ligand cationic chains, interspersed with organic carboxylate anions that provide charge compensation in the crystal structures. The lattice water molecules are situated among the framework of the crystal structure and show rich hydrogen-bonding interactions, which help to orientate the organic carboxylate anions in the crystal packing, and the presence of Ag···N and Ag···Ag contacts contributes to strengthen the frameworks. The luminescent properties and thermogravimetric analyses of the three complexes are also presented.     

New mononuclear ruthenium complexes of η-cyclichydrocarbon containing azine ligands: Syntheses, spectral and structural studies

A series of mononuclear indenyl and pentamethylcyclopentadienyl ruthenium(II) complexes of formulation [(η⁵-L₃)Ru(PPh₃)(L₂)]X, (where L₃ = indenyl, pentamethylcyclopentadienyl; X = PF₆ or BF₄ and L₂ = azine ligands) have been prepared by the reaction of [(η⁵-L₃)Ru(PPh₃)₂(CH₃CN)]X with the appropriate azine ligands in methanol or dichloromethane/benzene mixture. The reaction of nitro substituted azine ligands with the complexes [(η⁵-L₃)Ru(PPh₃)₂(CH₃CN)]X are solvent dependent. All these complexes were isolated as their PF₆ or BF₄ salts. The complexes were fully characterized with the help of microanalyses, FT-IR and NMR spectroscopy. The molecular structure of representative complexes 5c and 6a were established by single X-ray crystallography.     

ZnII and HgII complexes of 2,2′-diamino-4,4′-bis(1,3-thiazole) (DABTZ), spectroscopic,thermal and structural studies

New zinc(II) and mercury(II) complexes of 2,2′-diamino-4,4′-bis(1,3-thiazole) (DABTZ), [M(DABTZ)(CH₃COO)₂], have been synthesized and characterized by elemental analysis, IR-, ¹H NMR-, ¹³C NMR spectroscopy and studied by thermal analysis and X-ray crystallography. The structural characterization of the [Zn(DABTZ)(CH₃COO)₂] complex shows the complex to be a monomer and the Zn coordinated by two nitrogen atoms of the “DABTZ” ligand and four oxygen atoms of the acetate anions.     

Synthesis,X-ray structure,DFT and thermodynamic studies of mono- and binuclear palladium(II) complexes involving 1,4-bis(2-hydroxyethyl)piperazine,bio-relevant ligands and 4,4′-bipiperidine

[Pd(BHEP)Cl₂] (BHEp = 1,4-bis(2-hydroxyethyl)piperazine) was synthesized and characterized. The palladium center has a typical square-planar geometry with a tetrahedral distortion. The alcohol groups of the ligand do not participate in binding to Pd(II). The DFT/B3LYP method was used for geometric optimization of the ligand and the complex using the Gaussian 09 program and compared with experimental results. The stoichiometry and stability constants of the complexes formed between [Pd(BHEP)(H₂O)₂]²⁺ and some selected amino acids, peptides, and DNA constituents were investigated at 25 °C and 0.1 M ionic strength. The binuclear complex [(H₂O)(BHEP)Pd(Bip)Pd(BHEP)(H₂O)]⁴⁺ was detected, where Bip = 4,4′-bipiperidine. Inosine, uracil, and thymine interact with the binuclear complex via substitution of both coordinated water molecules. The potentiometric results were complimented by spectroscopic measurements. The concentration distribution diagrams of the various species formed were evaluated.     

New complexes of heavy lanthanides with 4,4′-bipyridine and trichloroacetates

Novel mixed-ligand complexes with empirical formula Ln(4-bpy)₂(CCl₃COO)₃·nH₂O [where Ln(III)?=?Dy, Ho, Er, Tm, Yb, Lu; 4-bpy?=?4,4??-bipyridine] were prepared and characterized by chemical and elemental analysis, infrared spectroscopy, and conductivity measurements (in methanol, dimethylformamide, and dimethyl sulfoxide). X-ray powder diffraction patterns indicate that the complexes are small crystalline compounds. IR spectra of complexes show that all carboxylate groups and 4-bpy are engaged in coordination of lanthanide ions. The thermal behavior of complexes was studied by means of TG, DTG, DTA techniques in the solid state under nonisothermal conditions in air atmosphere. During heating, the complexes decompose via intermediate products to the oxide Ln₂O₃. The combined TG?CFTIR technique was employed to study the decomposition pathway of the Ho(III) and Tm(III) complexes in flowing argon atmosphere.     

Synthesis and properties of 2,2′-dipyridyl and 4,4′-dipyridyl complexes with thulium salts

Summary New complexes of 2,2-dipyridyl and 4,4-dipyridyl with thulium salts TmX ₃ (whereX=Cl^–, Br^–, NO ₃ ^– , NCS^–, and ClO ₄ ^– ) have been prepared and their solubilities in water at 21 °C were determined. The IR spectra of these compounds are discussed. The conditions of thermal decomposition of the complexes were also studied.

---

Synthese und Eigenschaften von 2,2-Dipyridyl- und 4,4-Dipyridylkomplexen mit Thuliumsalzen

Zusammenfassung Es wurden neue 2,2-Dipyridyl- und 4,4-Dipyridyl-Komplexen mit Thuliumsalzen TmX ₃ (X=Cl^–, Br^– No ₃ ^– , NCS^–, ClO ₄ ^– ) dargestellt und ihre Wasserlöslihkeit bei 21 °C bestimmt. Die IR-Spektren werden diskutiert. Das thermische Verhalten der erhaltenen Komplexe wurde untersucht.