Mechanistic studies on the intramolecular electron transfer in an adduct species of the oxo-centred trinuclear iron(III) cation and <Emphasis Type="SmallCaps">l</Emphasis>-ascorbic acid in aqueous solution

The kinetics of the intra-molecular electron transfer of an adduct of l-ascorbic acid and the [Fe₃^IIIO(CH₃COO)₆(H₂O)₃]⁺ cation in aqueous acetate buffer was studied spectrophotometrically, over the ranges 2.55 ≤ pH ≤ 3.74, 20.0 ≤ θ ≤ 35.0 °C, at an ionic strength of 0.50 and 1.0 mol dm⁻³ (NaClO₄). The reaction of l-ascorbic acid and the complex cation involves the rapid formation of an adduct species followed by a slower reduction in the iron centres through consecutive one-electron transfer processes. The final product of the reaction is aqueous iron(II) in acetate buffer. The proposed mechanism involves the triaqua and diaqua-hydroxo species of the complex cation, both of which form adducts with l-ascorbic acid. At 25 °C, the equilibrium constant for the adduct formation was found to be 86 ± 15 and 5.8 ± 0.2 dm³ mol⁻¹ for the triaqua and diaqua-hydroxo species, respectively. The kinetic parameters derived from the rate expression have been found to be: k ₀ = (1.12 ± 0.02) × 10⁻² s⁻¹ for the combined spontaneous decomposition and k ₁ = (4.47 ± 0.06) × 10⁻² s⁻¹ (ΔH ₁^‡ = 51.0 ± 2.3 kJ mol⁻¹, ΔS ₁^‡ = −100 ± 8 J K⁻¹ mol⁻¹), k ₂ = (4.79 ± 0.38) × 10⁻¹ s⁻¹ (ΔH ₂^‡ = 76.5 ± 0.8 kJ mol⁻¹, ΔS ₂^‡ = 6 ± 3 J K⁻¹ mol⁻¹) for the triaqua and diaqua-hydoxo species, respectively.     

The kinetics of the reduction of tetraoxoiodate(VII) by <Emphasis Type="Italic">n</Emphasis>-(2-hydroxylethyl)ethylenediaminetriacetatocobaltate(II) ion in aqueous perchloric acid

The stoichiometries, kinetics and mechanism of the reduction of tetraoxoiodate(VII) ion, IO₄ ⁻ to the corresponding trioxoiodate(V) ion, IO₃ ⁻ by n-(2-hydroxylethyl)ethylenediaminetriacetatocobaltate(II) ion, [CoHEDTAOH₂]⁻ have been studied in aqueous media at 28 °C, I = 0.50 mol dm⁻³ (NaClO₄) and [H⁺] = 7.0 × 10⁻³ mol dm⁻³. The reaction is first order in [Oxidant] and [Reductant], and the rate is inversely dependent on H⁺ concentration in the range 5.00 × 10⁻³ ≤ H⁺≤ 20.00 × 10⁻³ mol dm⁻³ studied. A plot of acid rate constant versus [H⁺]⁻¹ was linear with intercept. The rate law for the reaction is:

A kinetic study of the oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-methionine by water soluble colloidal MnO<Subscript>2</Subscript>

Aqueous solution of water soluble colloidal MnO₂ was prepared by Perez-Benito method. Kinetics of l-methionine oxidation by colloidal MnO₂ in perchloric acid (0.93 × 10⁻⁴ to 3.72 × 10⁻⁴ mol dm⁻³) has been studied spectrophotometrically. The reaction follows first-order kinetics with respect to [H⁺]. The first-order kinetics with respect to l-methionine at low concentration shifts to zero order at higher concentration. The effects of [Mn(II)] and [F⁻] on the reaction rate were also determined. Manganese (II) has sigmoidal effect on the rate reaction and act as auto catalyst. The exact dependence on [Mn(II)] cannot be explained due to its oxidation by colloidal MnO₂. Methionine sulfoxide was formed as the oxidation product of l-methionine. Ammonia and carbon dioxide have not been identified as the reaction products. The mechanism with the observed kinetics has been proposed and discussed.     

Mechanistic investigations on the oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-valine by diperiodatocuprate(III) in aqueous alkaline medium: a kinetic model

The oxidation of l-valine (l-val) by diperiodatocuprate(III) (DPC) in aqueous alkaline medium at a constant ionic strength of 3.0 × 10⁻³ mol dm⁻³ was studied spectrophotometrically at 298 K and follows the rate law;

Application of the catalytic properties of N-methylthiourea to the determination of In(III) at low levels by square wave voltammetry

Abstract  

This article proposes a simple and fast method of In(III) determination in the presence of Cd(II) and Pb(II). The catalytic activity of N-methylthiourea was used in the In(III) electroreduction, which also had a slight effect on the electroreduction process of Cd(II) and Pb(II). By applying square wave voltammetry it was possible to determine 3 × 10⁻⁷ mol dm⁻³ In(III) in the presence of 5 × 10⁻⁵ mol dm⁻³ Cd(II) and 1 × 10⁻⁴ mol dm⁻³ Pb(II) in 5 mol dm⁻³ NaClO₄ at pH 2. The calibration curve for In(III) was linear from 3 × 10⁻⁷ to 5 × 10⁻⁴ mol dm⁻³. The relative standard deviation for In(III) determination was about 3.0%.     

Application of the Specific Ion Interaction Theory → the Solubility Product and First Hydrolysis Constant of Europium

The specific ion interaction theory (SIT) was applied to the first hydrolysis constants of Eu(III) and solubility product of Eu(OH)₃ in aqueous 2, 3 and 4 mol⋅dm⁻³ NaClO₄ at 303.0 K, under CO₂-free conditions. Diagrams of pEu_aq versus pC_H were constructed from solubilities obtained by a radiometric method, the solubility product log₁₀ K_{sp, Eu(OH)3}^I {Eu(OH)_3(s) Eu_aq³⁺+ 3OH_aq⁻ } values were calculated from these diagrams and the results obtained are log₁₀ K_sp,Eu(OH)3^I = − 22.65 ± 0.29, −23.32 ± 0.33 and −23.70 ± 0.35 for ionic strengths of 2, 3 and 4 mol⋅dm⁻³ NaClO₄, respectively. First hydrolysis constants {Eu_aq³⁺+H₂O Eu(OH)_(aq)²⁺+H⁺ } were also determined in these media by pH titration and the values found are log₁₀β_Eu,H^I = − 8.19 ± 0.15, −7.90 ± 0.7 and −7.61 ± 0.01 for ionic strengths of 2, 3, and 4 mol⋅dm⁻³ NaClO₄, respectively. Total solubilities were estimated taking into account the formation of both Eu³⁺ and Eu(OH)²⁺ (7.7 < pC_H < 9) and the values found are: 1.4 × 10⁻⁶ mol⋅dm⁻³, 1.2 × 10⁻⁶ mol⋅dm⁻³ and 1.3 × 10⁻⁶ mol⋅dm⁻³, for ionic strengths of 2, 3 and 4 mol⋅dm⁻³ NaClO₄, respectively. The limiting values at zero ionic strength were extrapolated by means of the SIT from the experimental results of the present research together with some other published values. The results obtained are log₁₀ K_{sp, Eu(OH)3}^o = − 23.94 ± 0.51 (1.96 SD) and log₁₀β_Eu,H⁰ = − 7.49 ± 0.15 (1.96 SD).     

The effect of sodium benzoate and sodium 4-(phenylamino)benzenesulfonate on the corrosion behavior of low carbon steel

Abstract  

The effect of sodium benzoate (SB) and sodium 4-(phenylamino)benzenesulfonate (SPABS) on the corrosion behavior of low carbon steel has been investigated using gravimetric method in the temperature range of 30–80 °C, velocity range of 1.44–2.02 m s⁻¹ and concentration range of 6.94 × 10⁻⁴ to 4.16 × 10⁻³ mol dm⁻³ SB and 3.69 × 10⁻⁴ to 2.06 × 10⁻³ mol dm⁻³ SPABS. Optimization of temperature, fluid velocity, and inhibitors concentration has been made. The obtained results indicate that the inhibition efficiency (w _IE %) at 1.56 m s⁻¹ is not in excess of 81.5% at 4.16 × 10⁻³ mol dm⁻³ SB and 84.4% at 2.06 × 10⁻³ mol dm⁻³ SPABS. The inhibitive performance of these compounds showed an improvement with increasing concentration up to critical values of SB and SPABS; beyond these concentrations no further effectiveness is observed. These inhibitors retard the anodic dissolution of low carbon steel by protective layer bonding on the metal surface. The adsorption of SB and SPABS on the low carbon steel surface was found to obey the Freundlich isotherm model. The FT-IR spectroscopy was used to analyze the surface adsorbed film.     

Kinetics of oxidation of N,N-bis(salicylaldehyde-1,2-diaminoethane) cobalt(II) complex by periodate. Evidence for the inhibiting effect of copper(II)

A kinetic study of the oxidation of [Co(H₂L)(H₂O)₂]²⁺ (H₂L = N,N-bis (salicylaldehyde-1,2-diaminoethane) Schiff base) by periodate in aqueous solution was performed over pH (2.3–3.4) range, (0.1–0.5) mol dm⁻³ ionic strength and temperatures 20–35 °C for a range of periodate and complex concentrations. The reaction rate showed a first-order dependence on both reactants and increased with pH over the range studied. The effects of Cu(II) and Fe(II) on the reaction rate were investigated over the (1.0–9.0) × 10⁻⁵ mol dm⁻³ range. The reaction was inhibited as the concentration of Cu(II) increased, and it was independent on Fe(II) concentrations over the ranges studied. An inner-sphere mechanism is proposed for the oxidation pathways of both the protonated and deprotonated Co^II complex species.     

CO<Subscript>2</Subscript> corrosion inhibition of X-70 pipeline steel by carboxyamido imidazoline

The corrosion inhibition of X-70 pipeline steel in saltwater saturated with CO₂ at 50 °C with carboxyamido imidazoline has been evaluated by using electrochemical techniques. Techniques included polarization curves, linear polarization resistance, electrochemical impedance, and electrochemical noise measurements. Inhibitor concentrations were 0, 1.6 × 10⁻⁵, 3.32 × 10⁻⁵, 8.1 × 10⁻⁵, 1.6 × 10⁻⁴, and 3.32 × 10⁻⁴ mol l⁻¹. All techniques showed that the best corrosion inhibition was obtained by adding 8.1 × 10⁻⁵ mol l⁻¹ of carboxyamido imidazoline. For inhibitor concentrations higher than 8.1 × 10⁻⁵ mol l⁻¹ a desorption process occurs, and an explanation has been given for this phenomenon.     

Temperature influence on the malonic acid decomposition in the Belousov-Zhabotinsky reaction

The kinetic investigations of the malonic acid decomposition (8.00 × 10⁻³ mol dm⁻³ ≤ [CH₂(COOH)₂]₀ ≤ 4.30 × 10⁻² mol dm⁻³) in the Belousov-Zhabotinsky (BZ) system in the presence of bromate, bromide, sulfuric acid and cerium sulfate, were performed in the isothermal closed well stirred reactor at different temperatures (25.0°C ≤ T ≤ 45.0°C). The formal kinetics of the overall BZ reaction, and particularly kinetics in characteristic periods of BZ reaction, based on the analyses of the bromide oscillograms, was accomplished. The evolution as well as the rate constants and the apparent activation energies of the reactions, which exist in the preoscillatory and oscillatory periods, are also successfully calculated by numerical simulations. Simulations are based on the model including the Br₂O species. The article is published in the original.     

Kinetic determination of silver at trace level based on its catalytic effect on a ligand substitution reaction

It is observed that Ag(I) catalyzes the rate of substitution of phenylhydrazine (PhNHNH₂) into hexacyanoferrate(II), producing a cherry red colored complex, [Fe(CN)₅PhNHNH₂]³⁻. The reaction was monitored at 488 nm leading to the formation of the complex under the conditions: [Fe(CN)₆]⁴⁻ (5.0 × 10⁻³ mol dm⁻³), PhNHNH₂ (2.0 × 10⁻³ mol dm⁻³), temperature (25 ± 0.1 °C), pH (2.8 ± 0.02), and ionic strength, I (0.02 mol dm⁻³), (KNO₃). Under optimum conditions, absorbance at fixed times (A _t ) is linearly related to Ag(I) in the concentration range 10.79–97.08 ng cm⁻³, in the presence of several diverse ions. The highest percentage error and relative standard deviations in the entire range of Ag(I) determination are found to be 2.5% and 0.16, with a detection limit of 8.75 ng cm⁻³ of silver(I). The experimental accuracies expressed in terms of percentage recoveries are in the range of 97.87–102.50. The method was successfully applied for the determination of Ag(I) in a few synthetic samples and found to be in good agreement with those obtained from atomic absorption spectrophotometry (AAS). The validity of the proposed method has also been tested for Ag(I) determination in spiked drinking water samples. The present catalytic kinetic method (CKM) is highly sensitive, selective, reproducible, and inexpensive. A review of recently published catalytic spectrophotometric methods for determination of Ag(I) has also been presented for comparison.     

The effect of sodium benzoate and sodium 4-(phenylamino)benzenesulfonate on the corrosion behavior of low carbon steel

Abstract  The effect of sodium benzoate (SB) and sodium 4-(phenylamino)benzenesulfonate (SPABS) on the corrosion behavior of low carbon steel has been investigated using gravimetric method in the temperature range of 30–80 °C, velocity range of 1.44–2.02 m s⁻¹ and concentration range of 6.94 × 10⁻⁴ to 4.16 × 10⁻³ mol dm⁻³ SB and 3.69 × 10⁻⁴ to 2.06 × 10⁻³ mol dm⁻³ SPABS. Optimization of temperature, fluid velocity, and inhibitors concentration has been made. The obtained results indicate that the inhibition efficiency (w _IE %) at 1.56 m s⁻¹ is not in excess of 81.5% at 4.16 × 10⁻³ mol dm⁻³ SB and 84.4% at 2.06 × 10⁻³ mol dm⁻³ SPABS. The inhibitive performance of these compounds showed an improvement with increasing concentration up to critical values of SB and SPABS; beyond these concentrations no further effectiveness is observed. These inhibitors retard the anodic dissolution of low carbon steel by protective layer bonding on the metal surface. The adsorption of SB and SPABS on the low carbon steel surface was found to obey the Freundlich isotherm model. The FT-IR spectroscopy was used to analyze the surface adsorbed film. Graphical abstract  Low carbon steel corrosion in presence of sodium benzoate and sodium 4-(phenylamino)benzenesulfonate has been investigated. The adsorption mechanism obeyed Freundlich isotherm model. FT-IR was used to analyze the adsorbed film      

Solvent/substrate effects on the micelle-catalyzed aquation reactions of some iron(II) phenanthroline complexes, I. Influence of water and acid on the aquation of Fe(Ph2Phen)32+ in acetone

The effects of a substrate additive, H⁺ and solvents (water and acetone), on the micelle-catalyzed aquation of tris-(4,7-diphenyl-1, 10-phenanthroline)iron(II), Fe(Ph₂Phen)₃ ²⁺, have been investigated using^#Triton X-100 micelles. The k₀ vs. [TX-100] profiles at fixed [H₂O] are structured, exhibiting maxima. Catalytic factors of 46.6–171.7 are observed for 5.56×10⁻²≤[H₂O] 55.60×10⁻² mol dm⁻³. On the other hand, at fixed [H⁺], the k₀ vs. [TX-100] exhibit broad maxima. The aquation reaction is inhibited by H⁺ and catalytic factors decrease rapidly and exponentially from 422.5 to 20.9 for 0.20×10⁻³≤[H⁺]≤2.00×10⁻³ mol dm⁻³. The aquation is found to be faster (ca. 160–1200 fold) in acetone than in the aqueous medium depending on the added [H₂O]. These observations are rationalized on the basis of a proposed modified lamellar structure for the Triton X-100 (TX-100) micelles in which direct substitution of water molecules into the coordination sphere of the complex occurs.     

Solubility and hydrolysis of lutetium at different [Lu<Superscript>3+</Superscript>]<Subscript>initial</Subscript>

Solubility product (Lu(OH)_3(s)⇆Lu³⁺+3OH⁻) and first hydrolysis (Lu³⁺+H₂O⇆Lu(OH)²⁺+H⁺) constants were determined for an initial lutetium concentration range from 3.72·10⁻⁵ mol·dm⁻³ to 2.09·10⁻³ mol·dm⁻³. Measurements were made in 2 mol·dm⁻³ NaClO₄ ionic strength, under CO₂-free conditions and temperature was controlled at 303 K. Solubility diagrams (pLu_aq vs. pC _H) were determined by means of a radiochemical method using ¹⁷⁷Lu. The pC _H for the beginning of precipitation and solubility product constant were determined from these diagrams and both the first hydrolysis and solubility product constants were calculated by fitting the diagrams to the solubility equation. The pC _H values of precipitation increases inversely to [Lu³⁺]_initial and the values for the first hydrolysis and solubility product constants were log₁₀ β* _Lu,H = −7.92±0.07 and log₁₀ K*_sp,Lu(OH)3 = −23.37±0.14. Individual solubility values for pC _H range between the beginning of precipitation and 8.5 were S _Lu3+ = 3.5·10⁻⁷ mol·dm⁻³, S _Lu(OH)2+ = 6.2·10⁻⁷ mol·dm⁻³, and then total solubility was 9.7·10⁻⁷ mol·dm⁻³.     

Solid state electrochemical of the erbium hexacyanoferrate-modified carbon ceramic electrode and its electrocatalytic oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-cysteine

A kind of erbium hexacyanoferrate (ErHCF)-modified carbon ceramic electrodes (CCEs) fabricated by mechanically attaching ErHCF samples to the surface of CCEs derived from sol–gel technique was proposed. The resulting modified electrodes exhibit well-defined redox responses with the formal potential of +0.215 V [vs saturated calomel electrode (SCE)] at a scan rate of 20 mV s⁻¹ in 0.5 M KCl (pH 7) solution. The voltammetric characteristics of the ErHCF-modified CCEs were investigated by voltammetry. Attractively, the ErHCF-modified CCEs presented good electrocatalytic activity with a marked decrease in the overvoltage about 400 mV for l-cysteine oxidation. The calibration plot for l-cysteine determination was linear at 5.0 × 10⁻⁶–1.3 × 10⁻⁴ M with a linear regression equation of I(A) = 0.558 + 0.148c (μM) (R ² = 0.9989, n = 20), and the detection limit was 2 × 10⁻⁶ M (S/N = 3). At last, the ErHCF-modified CCEs were used for amperometric detection of l-cysteine in real samples.     

Polarographic Catalytic Wave of Prednisone in the Presence of Persulfate and its Application

 A polarographic catalytic wave of prednisone in the presence of K₂S₂O₈ was observed. The polarographic catalytic wave of prednisone as catalyst was attributed to such chemical reaction parallel to electrode reaction as oxidized the free radical from one electron reduction of the Δ^1,4-3 keto group of prednisone to regenerate the original keto group. The catalytic wave can be used for the determination of prednisone with the help of conventional polarographic equipment, such as linear-potential scan polarograph. In 0.12 mol l⁻¹ HAc-0.08 mol l⁻¹ NaAc-0.014 mol l⁻¹ K₂S₂O₈ (pH 4.6) supporting electrolyte, the second-order derivative peak current of the catalytic wave was rectilinear to prednisone concentration in the range of 3.2 × 10⁻⁷∼1.6 × 10⁻⁵ mol l⁻¹. The detection limit was 8.0 × 10⁻⁸ mol l⁻¹. Received August 6, 2001; accepted April 17, 2002; published online July 22, 2002     

Mechanistic study of the oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-phenylalanine by hexacyanoferrate(III) catalyzed by iridium(III) in aqueous alkaline medium

The oxidation of l-phenylalanine by hexacyanoferrate(III) (abbreviated as HCF) catalyzed by Ir(III) has been studied spectrophotometrically at 35 °C and at a constant ionic strength of 0.50 mol dm⁻³. The main oxidation product was identified as phenylpyruvic acid by physico-chemical and spectroscopic methods. The stoichiometry was found to be 2:1, i.e. 2 mol of hexacyanoferrate(III) reacted with 1 mol of phenylalanine. The reaction was first order with respect to both HCF and alkali concentration. The order with respect to [Phe] changed from first to zero as the concentration was increased. The effect of ionic strength was also investigated. Thermodynamic parameters were evaluated by studying the reaction at four different temperatures between 35 and 50 °C. Based on the experimental results, a suitable mechanism involving complex formation has been proposed.     

Behavior of cadmium(II) in irradiated aqueous solutions

Behavior of cadmium(II) in aqueous solutions irradiated by accelerated electrons was studied. A concentration of 8.8 × 10⁻⁴ mol L⁻¹ of cadmium dissolved from Cd(NO₃)₂ requires dose of 15 kGy to be effectively removed from the system containing 1 × 10⁻² mol L⁻¹ of HCOOK as a scavenger of OH radicals. The positive effect of deaeration with N₂O or N₂ was observed in the range of lower doses. The addition of solid modifiers (bentonite, active carbon, zeolite, Cu₂O, NiO, TiO₂ and CuO) reduced the effectivity of radiation removal of cadmium. Product of irradiation is CdCO₃. On the contrary, in the system with cadmium dissolved from CdCl₂ radiation reduction takes place. Systems contained organic complexants (ethylene diamine tetraacetic acid–EDTA, citric acid) were also studied. The solutions of Cd(NO₃)₂ containing initial concentration 2.37 × 10⁻⁴ mol L⁻¹ of Cd^II were mixed with 3 × 10⁻⁴ mol L⁻¹ EDTA. In this system the efficient degradation proceeds up to 90% at a dose of 45 kGy with addition of 5 × 10⁻³ mol L⁻¹ carbonate (pH 10.5). The product of irradiation is CdCO₃. The presence of 1 × 10⁻² mol L⁻¹ of HCOOK in the solution is necessary for radiation removal of cadmium complexed with citric acid (1 × 10⁻³ mol L⁻¹) at pH 8. With increasing concentration of HCOOK (up to 5 × 10⁻² mol L⁻¹) decreases the pH value necessary for the radiation induced precipitation of cadmium. The best result was obtained in the system containing zeolite as a solid modifier.     

Cathodic Adsorptive Stripping Voltammetry for Estimation of the Forest Area Pollution with Nickel and Cobalt

 Necessary conditions were established for simultaneous nickel and cobalt determination in environmental samples, such as oak wood and soil, based on cathodic adsorptive stripping voltammetry. Ni(II) and Co(II), complexed with dimethylglyoxime, were determined using a hanging mercury drop electrode. Optimum conditions were found to be: accumulation time 90 s, accumulation potential −0.80 V vs. SCE, supporting electrolyte 0.2 mol dm⁻³ ammonia-ammonium chloride buffer (pH = 9.4) + 0.05 mol dm⁻³ NaNO₂ and dimethylglyoxime 2 × 10⁻⁴ mol dm⁻³. A linear current-concentration relationship was observed up to 7.51×10 ⁻⁷ mol dm⁻³ for Ni(II) and 7.0 × 10⁻⁷ mol dm⁻³ for Co(II). Excess amounts of zinc(II) interfering with cobalt peaks were masked by complexation with EDTA. Wood and soils were mineralized by applying a microwave digestion system, using the mixtures H₂O₂ + HNO₃ or HNO₃ + HF, respectively. The developed procedure was tested by analysing international reference materials (BCR 62 Olive Leaves and GBW 08302 Tibet Soil). The developed procedure was used to determine pollution of oak stand with nickel and cobalt in different regions of Poland. Received August 10, 2000. Revision May 22, 2001.     

Intermediate and ion-pair formation in the outer-sphere reactions between azido-pentacyanocobaltate(III) and iron(II) polypyridyl complexes in aqueous medium

The kinetics of the reactions between azido-pentacyanocobaltate(III), Co(CN)₅N₃ ³⁻, and iron(II) polypyridyl complexes, Fe(LL)₃ ²⁺ (LL = bipy, phen), have been studied in both neutral and acidic aqueous solutions at I = 0.1 mol dm⁻³ NaCl. The reactions were carried out under pseudo-first-order conditions in which the concentration of Fe(LL)₃ ²⁺ was kept constant, and the second-order rate constants obtained for the reactions at 35 °C were within the range of 0.156–0.219 dm³ mol⁻¹ s⁻¹ for LL = bipy and 0.090–0.118 dm³ mol⁻¹ s⁻¹ for LL = phen. Activation parameters were measured for these systems. The dependence of reaction rates on acid was studied in the range [H⁺] = 0.001–0.008 mol dm⁻³. The reaction in acid medium shows interesting kinetics. Two reactive species were identified in acid medium, namely, the protonated cobalt complex and the azido-bridged binuclear complex. The electron-transfer process is proposed to go by mixed outer- and inner-sphere mechanisms in acid medium, in which electron transfer through the bridged inner-sphere complex (k ₅) is slower than through the outer-sphere path (k ₄). Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.