Structural and optical properties of ZnO nanorods grown on MgxZn1−xO buffer layers

ZnO nanorod arrays were synthesized by chemical-liquid deposition techniques on Mg_xZn_1−xO (x = 0, 0.07 and 0.15) buffer layers. It is found that varying the Mg concentration could control the diameter, vertical alignment, crystallization, and density of the ZnO nanorods. The X-ray diffraction (XRD), transmission electron microscopy (TEM), and selected area electron diffraction (SAED) data show the ZnO nanorods prefer to grow in the (0 0 2) c-axis direction better with a larger Mg concentration. The photoluminescence (PL) spectra of ZnO nanorods exhibit that the ultraviolet (UV) emission becomes stronger and the defect emission becomes weaker by increasing the Mg concentration in Mg_xZn_1−xO buffer layers.     

Optical properties of exciton confinement in wurtzite ZnO/MgxZn1−xO coupled quantum dots

Based on the framework of effective-mass approximation and variational approach, optical properties of exciton are investigated theoretically in ZnO/Mg_xZn_1−xO vertically coupled quantum dots (QDs), with considering the three-dimensional confinement of electron and hole pair and the strong built-in electric field effects due to the piezoelectricity and spontaneous polarization. The exciton binding energy, the emission wavelength and the oscillator strength as functions of the different structural parameters (the dot height and the barrier thickness between the coupled wurtzite ZnO QDs) are calculated with the built-in electric field in detail. The results elucidate that structural parameters have a significant influence on the exciton state and optical properties of ZnO coupled QDs. These results show the optical and electronic properties of the quantum dot that can be controlled and also tuned through the nanoparticle size variation.     

The effect of growth ambient on the structural and optical properties of MgxZn1−xO thin films

Mg_xZn_1−xO (x = 0.0-0.20) thin films have been deposited by sol-gel technique on glass substrates and the effect of growth ambient (air and oxygen) on the structural, and optical properties have been investigated. The films synthesized in both ambient have hexagonal wurtzite structure. The c-axis lattice constant decreases linearly with the Mg content (x) up to x = 0.05, and 0.10 respectively for air- and oxygen-treated films, above which up to x = 0.20, the values vary irregularly with x. The change in the optical band gap values and the ultraviolet (UV) peak positions of Mg_xZn_1−xO films show the similar change with x. These results suggest that the formation of solid solution and thus the structural and optical properties of Mg_xZn_1−xO thin films are affected by the growth ambient.     

Properties of MgxZn1−xO thin films sputtered in different gases

Mg_xZn_1−xO alloy films were prepared on sapphire substrates using Ar and N₂ as the sputtering gases. The effect of the sputtering gas on the structural, optical and electrical properties of the Mg_xZn_1−xO films was studied. By using N₂ as the sputtering gas, the Mg_xZn_1−xO film shows p-type conductivity and the band gap is larger than that employing Ar as the sputtering gas. The reason for this phenomenon is thought to be related to the reaction between N-O or N-Zn, and the N-doping.     

Electronic and structural properties of zincblende AlxIn1−xN

Numerical calculations based on first-principles are applied to study the electronic and structural properties of ternary zincblende AlInN alloy. The results indicate the lattice constant has a small deviation from the Vegard’s law. The direct and indirect bowing parameters of 4.731 ± 0.794 eV and 0.462 ± 0.285 eV are obtained, respectively, and there is a direct-indirect crossover near the aluminum composition of 0.817. The bulk modulus is monotonically increased with an increase of the aluminum composition, and the deviation parameter of bulk modulus of 10.34 ± 9.37 GPa is obtained. On the contrary, the pressure derivative of bulk modulus is monotonically decreased with an increase of the aluminum composition.     

Electric-field-induced energy spectra and dispersions of ZnO/MgxZn1−xO MQWs

The energy spectra and dispersion relations of carriers in the presence of an electric field applied along the growth direction in ZnO/Mg_xZn_1−xO multiple quantum wells (MQW) are calculated using the asymptotic transfer method (ATM) on the basis of the quasistationary state approximation. The energy spectra of the carriers induce some quasi-bound levels under electric fields. The dispersion relations for the energy of the ground state and lower excitation states still have parabolic shapes for both the electrons and the heavy holes in the presence of a moderate electric field. Our results also reveal that the number of energy levels increases with increasing number of ZnO quantum wells and that the energies increase with both increasing Mg composition x and electric field strength.     

Optical properties of one-dimensional photonic crystals containing graded materials

The optical properties of an one-dimensional photonic crystal containing graded materials are studied theoretically. The graded layers have space dispersive permittivity and magnetic permeability which vary along the direction perpendicular to the surface of the layer. The gradation profiles of permittivity are studied in detail. We show that the structure possesses forbidden band gaps in its transmission spectra and the gradation profiles of permittivity affect the band gaps significantly. For the exponential gradation profile ε₁(x) = α e^βx, the number of the band gaps increases and the total frequency region corresponding to the gaps becomes large with increasing parameter β. On the other hand, the position of band gaps can be changed by the adjustment of the gradation profiles even if possessing same volume-average permittivity in the graded layers. Therefore, we can achieve suitable photonic band gaps by choosing gradation profiles of permittivity.     

Optical properties of MgxZn1−xO thin films deposited on silicon and sapphire substrate by rf magnetron sputtering

The index dispersion at UV–VIS range for polycrystalline Mg_xZn_1−xO films on silicon with different Mg concentration was obtained by spectroscopic ellipsometry (SE) method. It decreases with the increase of the Mg content. Above the relative peak wavelength, they are well fitted by the first-order Sellmeier relation. The band gap of films on sapphire of different Mg content was determined from transmission measurements. Photoluminescence (PL) illustrated that for Mg_xZn_1−xO films every PL peak corresponded to a special excitation wavelength. The wavelength of the PL peak was proportional to the special excitation wavelength. A strong peak was obtained in the blue band for the films due to the large amount of oxygen vacancies caused by excess Zn and Mg atoms, while weak peak at ultraviolet band.     

Growth of cubic MgxZn1−xO alloy films by electron beam evaporation

We report the growth of cubic Mg_xZn_1−xO alloy thin films on quartz by electron beam evaporation. It can be found that all the samples have sharp absorption edges by the absorption measurements. X-ray diffraction measurements indicate the Mg_xZn_1−xO films are cubic phase with preferred orientation along the (1 1 1) direction. Energy dispersive spectrometry (EDS) demonstrates that the Mg concentration in Mg_xZn_1−xO films is much higher than the ceramic target used, and the composition can be tuned in a small scope by varying the substrate temperature and the beam electric current. The reasons of this phenomenon are also discussed.     

Optical properties of bulk Zn1−xCoxO magnetic semiconductors

Polycrystalline Zn_1−xCo_xO (x=0, 0.02, 0.05, 0.10 and 0.15) oxides have been synthesized by solid state reaction via sintering ZnO and Co powders in open air. X-ray diffraction analyses using Rietveld refinement indicate that a stoichiometric single phase with a wurtzite-like structure was found in Zn_1−xCo_xO samples with x up to 0.10. The elemental mapping using energy dispersive X-ray spectroscopic analyses presents a uniform distribution of Co. Optical transmittance measurements show that several extra absorption bands appear in the Co-doped ZnO, which is due to the transitions between the crystal-field-split 3d levels of tetrahedral Co²⁺ substituting Zn²⁺ ions. Raman measurements show that limited host lattice defects are induced by Co doping. Magnetization measurements reveal that the Co-doped ZnO samples are paramagnetic due to the absence of free carriers and in low temperature the dominant magnetic interaction is nearest-neighbor antiferromagnetic.     

Linear and nonlinear optical response of MgxZn1−xO: A density functional study

Total and partial density of states, frequency dependent complex refractive index including extinction coefficient, optical conductivity and transmission of Mg_xZn_1−xO (0≤x≤1) in rocksalt and wurtzite phases are calculated using full potential linearized augmented plane wave (FP-LAPW) method. The real part of refractive index decreases while the extinction coefficient, optical conductivity and transmission for rocksalt phase increases with the increase in Mg concentration. In wurtzite phase, ordinary and extraordinary indices decrease while extinction coefficient, optical conductivity and transmission increase in parallel as well as perpendicular to c-axis with the increase in the Mg concentration.     

Elasticity, band structure, and piezoelectricity of BexZn1−xO alloys

Lattice constants, elasticity, band structure and piezoelectricity of hexagonal wide band gap Be_xZn_1−xO ternary alloys are calculated using first-principles methods. The alloys' lattice constants obey Vegard's law well. As Be concentration increases, the bulk modulus and Young's modulus of the alloys increase, whereas the piezoelectricity decreases. We predict that Be_xZn_1−xO/GaN/substrate (x=0.022) multilayer structure can be suitable for high-frequency surface acoustic wave device applications. Our calculated results are in good agreement with experimental data and other theoretical calculations.     

Influence of Mg content on optical properties of exciton confinement in wurtzite ZnO/MgxZn1−xO coupled quantum dots

Based on the framework of effective-mass approximation and variational approach, optical properties of exciton are investigated theoretically in ZnO/Mg_xZn_1−xO vertically coupled quantum dots (QDs), with considering the three-dimensional confinement of electron and hole pair and the strong built-in electric field effects. The exciton binding energy, the emission wavelength and the oscillator strength as functions of the structural parameters (the dot height, the barrier thickness between the coupled wurtzite ZnO QDs and Mg content x in the barrier layers) is calculated in detail. The results elucidate that Mg content have a significant influence on the exciton state and optical properties of ZnO coupled QDs. When Mg content x increases, the strong built-in electric field increases and leads to the redshift of the effective band gap of the Mg_xZn_1−xO layer. These theoretical results are useful for design and application of some important photoelectronic devices constructed by using ZnO strained QDs.     

New Configuration of Ring Resonator in Photonic Crystal Based on Self-Collimation

We propose a novel ring resonator configuration in a channelless photonic crystal. The proposed ring resonator utilizes the self-collimation effect and the bending and splitting mechanisms of line defects to route the propagation of light, instead of conventional indexed-guided waveguides or photonic crystal band gap waveguides. The finite-difference time-domain method (FDTD) is used to investigate the characteristics of the ring resonator. The new design exhibits an ON--OFF contrast with an extinction ratio of more than 12dB, and has an ultra-compact footprint of 3.3×3.3μm² when it operates at the optical communication wavelength λ=1.55μm. The design presented may find applications in the areas including ultra-compact optical switch and wavelength filer in integrated optical circuits.     

TE and TM defective bands splitting in one-dimensional coupled cavity waveguides

Transverse magnetic (TM) and transverse electric (TE) defective bands will split with different incident angles (wave-vectors) in the one-dimensional coupled cavity waveguide. Different defective band properties are shown, including the shift of pass-band frequency and the variation of defective band width resulting from different localization properties of the electric field in the defective layer. The critical splitting angle, at which splitting of the TE and TM defective bands emerges, will decrease with increasing dielectric index of the defective layer.     

Structure and magnetic properties of CoxPb1−x nanowire arrays

Ordered Co_xPb_1−x nanowire arrays embedded in the porous anodic aluminum oxide (AAO) template have been fabricated by electrodeposition. XRD experiments prove that neither hexagonal-close-packed (hcp) nor face-centered-cubic (fcc) Co peaks are detected when the Co component (x) is below 0.91. The coercivity (H_c) and squareness (M_r/M_s) are found to increase with ferromagnetic Co component and the maximum value is at the position x=1 (pure Co nanowires). Annealing effects cause H_c and M_r/M_s increase, which surpasses the pure Co nanowires in the 0.2<x<0.6 at the annealing temperature of 700 °C. Microstructure change during annealing process is proposed to explain the magnetic properties change of samples.     

Band-gap properties of two-dimensional low-index photonic crystals

We study the band-gap properties of two-dimensional photonic crystals created by a lattice of rods or holes conformed in a symmetric or asymmetric triangular structure. Using numerical plane-wave method, we calculate a minimum value of the refractive-index contrast for opening both partial and full two-dimensional spectral gaps for both TM- and TE-polarized waves. We also analyze the effect of ellipticity of rods and holes and their orientation on the threshold value and the relative size of the band gaps.     

The effect of etching interfacial layers on the absolute photonic band gap in two-dimensional photonic crystals

The photonic band structures of two-dimensional (2D) photonic crystals with etched interfacial layers between air rods and the background dielectric is studied theoretically. The effect of etching interfacial layers on absolute photonic band gap (PBG) is analyzed quantitatively. Numerical calculations are carried out based on Maxwell's equations and the plane-wave expansion method. It is shown that the physical property of interfacial layers influence the absolute PBG, and the existence of interfacial layers cannot enlarge the largest absolute PBG of an ideal case without interfacial layers.     

Ferromagnetism of MnxLiyZn1−x−yO films

We had prepared Mn-doped ZnO and Li, Mn codoped-ZnO films with different concentrations using spin coating method. Crystal structure and magnetic measurements demonstrate that the impurity phases (ZnMnO₃) are not contributed to room temperature ferromagnetism and the ferromagnetism in Mn-doped ZnO film is intrinsic. Interesting, saturated magnetization decreases with Mn or Li concentration increase, showing that some antiferromagnetism exists in the samples with high Mn or Li concentration. In addition, Mn_0.05Zn_0.95O film annealed in vaccum shows larger ferromagnetism than the as-prepared sample and more oxygen vacancies induced by annealing in reducing atmosphere enhance ferromagnetism, which supports the bound magnetic polaron model on the origin of room temperature ferromagnetism.     

Structural, electrical, optical and magnetic properties of Co0.2AlxZn0.8−xO films

Co_0.2Al_xZn_0.8−xO films prepared with different molar ratio of aluminum nitrate to zinc acetate were deposited on substrates by the sol-gel technique. X-ray diffraction, photoluminescence and ferromagnetism measurements were used to characterize the Co_0.2Al_xZn_0.8−xO diluted magnetic semiconductors. The authors found that the intensity of the acceptor-related photoluminescence increased with increasing aluminum concentration and an increase in the number of the acceptor-like defects (zinc vacancies especially) in the Co_0.2Al_xZn_0.8−xO film might lead to the enhancement of the magnetic properties. This implies that controls of the aluminum concentration and the number of the acceptor-like defects are important factors to produce strong ferromagnetism Co_0.2Al_xZn_0.8−xO films prepared by the sol-gel method.