Naproxen drug delivery using periodic mesoporous silica SBA-15

In this paper, we present the release of naproxen from hexagonal periodic mesoporous silica SBA-15, which serves as a drug delivery system. Naproxen, the well-known nonsteroidal anti-inflammatory drug (NSAID), was loaded into the pores of SBA-15 silica modified with aminopropyl groups. The physicochemical properties of the modified sample (A-SBA-15/napro) were compared with the unmodified SBA-15 mesoporous silica loaded with the drug (SBA-15/napro). The kinetic of the naproxen release into the physiological solution was studied. The released amount of naproxen represented 90.7% from the unmodified SBA-15 in 72 h, while from the sample A-SBA-15/napro the released amount represented about 80.9%. The prepared materials were characterized by nitrogen adsorption/desorption, Small angle X-ray scattering (SAXS), Fourier-transform infrared spectroscopy (FT-IR) and the thermoanalytical methods (TG/DTA). Thin layer chromatography (TLC) was used for quantitative determination of the released naproxen.     

Synthesis and thermal stability of gold nanowires within monolithic mesoporous silica

This paper describes the preparation, by a novel and simple method, and the thermal stability of gold nanowires within monolithic mesoporous silica, involving soaking monolithic mesoporous silica in HAuCl₄ aqueous solution, followed by drying and subsequent step-annealing. It has been shown that reduction of Au³⁺ within silica pores can occur during the drying process at 80 °C without any special reduction treatment. After initial annealing at 300 °C, Au nanowires are formed within the pores and are stable at temperatures up to 500 °C. Increasing the annealing temperature leads to a wire-to-rod-to-sphere morphological transformation of the Au nanowires. The surface-mediated reducing groups (-OH) on the silica pore are responsible for the low-temperature reduction of Au³⁺ ions, and the formation of Au nanowires is attributed to the uni-directional diffusion of Au atoms and the confinement of the pore channels. Spheroidization and breaking at some defects in the Au nanowires during annealing at elevated temperature result in the wire-to-rod-to-sphere transformation, accompanied by a blue-shift of the surface plasmon resonance over a very wide region in the optical spectrum. PACS 81.07.-b; 81.40.-z; 81.05.Rm     

Tuning the morphology of mesoporous silica by using various template combinations

By using different dual-template combinations, four types of mesoporous silica materials with different morphologies were successfully synthesized. A solid-sphere mesoporous (SSM) silica was obtained using a combination of tri-block copolymer (F127) and 1,12-diaminododecane (DADD), but when F127 was substituted with poly(vinylpyrrolidone) (PVP), a leaf-shaped mesoporous (LSM) silica was obtained. In addition, a hollow-sphere mesoporous (HSM) silica was obtained by using a combination of PVP and dodecylamine (DDA), but a cotton-like mesoporous (CLM) silica was obtained using F127 instead of PVP. All four types of synthesized materials were characterized by SEM, TEM, XRD, and N₂ adsorption–desorption isotherms, and the results showed that all of them exhibited high surface area, large pore volume, worm-like pore structure, and beautiful shapes. The results of storage experiments revealed that the HSM and CLM showed good adsorption and storage properties. The HSM (the largest pore volume) seemed to have the larger storage capacity when compared to the CLM, albeit CLM had the highest surface area among all.     

Detection of formaldehyde using mid-infrared difference-frequency generation

3 (PPLN) is reported. Minimum detectable concentration of 30 ppb was achieved with a compact, portable room-temperature gas sensor configured for formaldehyde (H₂CO) detection. This sensitivity, coupled with high selectivity and long term stability, is sufficient for various environmental applications. Received: 29 September 1997     

Positron annihilation studies of mesoporous silica films using a slow positron beam

Positron annihilation lifetime spectra were measured for mesoporous silica films, which were synthesized using triblock copolymer (EO₁₀₆PO₇₀EO₁₀₆) as a structure-directing agent. Different positron lifetime spectra for the deposited and calcined films indicated the formation of meso-structure after calcination, which was confirmed by Fourier transform infrared (FTIR) spectra and field emission-scanning electron microscopy (FE-SEM) observation. Open porosity or pore interconnectivity of a silica film might be evaluated by a two-dimensional positron annihilation lifetime spectrum of an uncapped film. Pore sizes and their distributions in the silica films were found to be affected by thermal treatments.     

Ultrasound-mediated gene delivery into suspended plant cells using polyethyleneimine-coated mesoporous silica nanoparticles

Sonoporation, ultrasound-mediated membrane perforation can potentially puncture plasma membrane and rigid cell wall on presumably reversible basis which benefit gene transfection and plant biotechnology. Herein, positively charged poly-ethyleneimine (PEI)-coated mesoporous silica nanoparticles (MSNs) with an average diameter of 100 ± 8.7 nm was synthesized for GUS-encoding plasmid delivery into the suspended tobacco cells using the ultrasound treatment. The overall potential of PEI-MSN for DNA adsorption was measured at 43.43 μg DNA mg⁻¹ PEI-MSNs. It was shown that high level of sonoporation may adversely upset the cell viability. Optimal conditions of ultrasonic treatment are obtained as 8 min at 3 various intensities of 160, 320 and 640 W. Histochemical staining assay was used to follow the protein expression. It was shown that PEI-coated MSNs efficiently transfer the GUS-encoding plasmid DNA into the tobacco cells. The results of this study showed that ultrasonic treatment provides an economical and straightforward approach for gene transferring into the plant cells without any need to complicated devices and concerns about safety issues.     

Synthesis of porous hollow silica spheres using polystyrene-methyl acrylic acid latex template at different temperatures

Porous hollow silica spheres were prepared by using polystyrene-methyl acrylic acid latex as a template and cetyltrimethylammonium bromide as a wall structure-directing agent starting from tetraethoxysilane. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-infrared spectroscopy (FT-IR) and nitrogen adsorption/desorption were used to characterize the hollow silica spheres. When silica-coated latex composites were prepared at room temperature, hollow silica spheres with micropores in the walls were formed after removing the latex templates by calcination. When silica-coated latex composites were aged at a higher temperature of 150 °C, intact mesoporous hollow silica spheres were formed after calcination treatment.     

Synthesis of hematite nanowires using a mesoporous hard template

The influence of the impregnation media (ethanol or water) and the calcination atmosphere (air and NO/He) on the hematite nanowires production embedded on a hard template (MCM-41) was studied. The solids were characterized by X-ray diffraction, Mössbauer spectroscopy and magnetic measurements. The results obtained indicate that the more appropriate conditions for the iron oxide nanowires to get inside the MCM-41 hard template seem to be reached using water as a solvent and air as calcination atmosphere.     

Synthesis of single-walled carbon nanotubes in mesoporous silica film and their field emission property

We have succeeded in direct synthesis of single-walled carbon nanotubes (SWNTs) on a conductive substrate coated with a 3D mesoporous silica film, and observed the field emission. Co catalysts for the growth of SWNTs are deposited on the substrate by electroplating. The particle size of the catalyst is well-controlled inside defined space of the mesoporous silica film. Furthermore, the location of Co particles can be controlled in the mesopores by the electroplating method. Mono-dispersed SWNTs are grown along with the mesopores that are normal to the substrate, because Co particles are deposited at the bottom of the mesopores. It is also found that the mesoporous silica film prevents the aggregation of Co catalysts and the distortion of Au layer as the conductive substrate. The field emission measurement shows that the turn-on field is 4.2 V/μm at 10 μA/cm². The field enhancement factor is about 1500. This approach provides an efficient methodology for fabricating an SWNTs-based field emitters. PACS 73.63.Fg; 78.55.Mb     

Synthesis and characterization of a hexagonal mesoporous silica with enhanced thermal and hydrothermal stabilities

A synthetic route was developed for a novel hexagonal mesoporous silica that has remarkably wide channel diameters and thick walls. The procedure involved the acid-catalyzed hydrolysis of tetraethylorthosilicate in a water/ethanol/isopropoanol solvent mixture while employing 1-hexadecylamine as a templating agent and mesitylene as an auxiliary agent. After removal of the template by either extraction with ethanolic hydrochloric acid or by calcination at 550 °C, the resulting mesoporous materials had surface areas of 1283 and 1211 m²/g. The channel diameters were found to be 47.2-51.1 Å, while the wall thicknesses were 20.9-21.1 Å. X-ray powder diffraction demonstrated that the novel mesoporous silica belonged to the MCM-41 structural family. Notably, they displayed higher thermal and hydrothermal stabilities, and have higher surface areas than conventionally prepared MCM-41 silica. The thickest channel walls (21.1 Å) can withstand calcination to nearly 850 °C with minimal structural damage. The calcined sample was more resistant to hydrothermal treatment in boiling water than was the solvent-extracted product but both materials showed minimal change after 25 h of hydrothermal treatment.     

ZnO nanoparticles embedded in UVM-7-like mesoporous silica materials: Synthesis and characterization

ZnO nanodomains embedded in bimodal mesoporous silica (UVM-7) materials with high Zn content (4≤Si/Zn≤30) have been synthesized by an one-pot surfactant-assisted procedure from a hydro alcoholic medium using a cationic surfactant (CTMABr=cetyltrimethylammonium bromide) as structural directing agent, and starting from molecular atrane complexes of Zn and Si as hydrolytic inorganic precursors. This chemical procedure allows optimizing the dispersion of the ZnO particles in the silica walls. The bimodal mesoporous nature of the final high surface area nano-sized materials is confirmed by XRD, TEM, and N₂ adsorption–desorption isotherms. The small intra-particle mesopore system is due to the supramolecular templating effect of the surfactant, while the large pores have their origin in the packing voids generated by aggregation of the primary nanometric mesoporous particles. A limited pore blocking and a high accessibility to the ZnO active nanoparticles have been achieved. The effects induced by the progressive incorporation of ZnO nanoparticles into the mesostructure have been examined, including a careful optical spectroscopic study (PL and UV–visible).     

Reflectance spectra of ordered mesoporous layers of silica

Mesoporous layers of silica deposited onto Si + SiO₂ are of interest for many optical applications. Reflectance spectra measured at normal incidence of such composite structure show a behaviour that has been attributed mainly to interference created by the interfaces, and, therefore, only weakly influenced by coherent scattering inside of the mesoporous layer.     

Structure and acid-base properties of surface-modified mesoporous silica

A series of surface-modified mesoporous silica endowing with acid-base properties have been successfully synthesized in one pot by in situ introduction of zirconium and magnesium salts into the initial mixture of synthesizing mesoporous silica (SBA-15) and this method combines into a single step to form a novel material with a periodically ordered mesoporous backbone and specific chemical reactivity of the acid-basic sites. X-ray diffraction, high-resolution transmission electron microscopes (HRTEM), N₂ adsorption, FT-IR transmission spectra, ²⁹Si MAS NMR spectra, NH₃- and CO₂-temperature programmed desorption (TPD) are employed to characterize the titled mesoporous materials. The results indicate that the product possesses excellent acid-basic properties with well mesoporous structure, which make it promising for their application in heterogeneous catalysis and adsorption-separation processes.     

Development of cholesterol biosensor with high sensitivity using dual-enzyme immobilization into the mesoporous silica materials

Mesoporous silica (MPS) materials with different pore diameters were synthesized by a sol–gel method where organic templates such as cationic surfactant (cetyltrimethylammonium bromide) and triblock co-polymer of (poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) (Pluronic P123, EO₂₀PO₇₀EO₂₀)), were used. MPS surface was organo-functionalized using a silane coupling reagent (ethyl-, phenyl-, or 3-mercaptpropyltriethoxysilane). Dual-enzyme, cholesterol esterase (10.0 nm × 5.4 nm × 11.0 nm) and cholesterol oxidase (6.8 nm × 8.5 nm × 8.8 nm), was immobilized on MPS materials by physical adsorption. Amount of dual-enzyme immobilized on all MPS materials, having a different pore size (2.7, 6.4, 12.4, 14.7, and 22.6 nm), and organo-functionalized MPS was similar (CE: 1.5 mg/mg silica and CO: 0.01 mg/mg silica). High activity of dual-enzyme was obtained by adjacently immobilizing on MPS materials. Its activity on MPS-2 (pore diameter: 6.4 nm) or MPS-5 (pore diameter: 22.6 nm) showed approximately 60% of native activity. Moreover, dual-enzyme immobilized on MPS with highly hydrophobic organo-functional groups (phenyl- or mercaptopropyl-group) exhibited higher activity than that on no-substituted MPS. Relative activity of dual-enzyme immobilized on organo-functionalized MPS-2 increased from 58% to 93%, under the optimum conditions.     

Synthesis and characterization of MnWO4 nanoparticles encapsulated in mesoporous silica SBA-15 by fast microwave-assisted method

The MnWO₄ nanoparticles encapsulated in mesoporous silica (MnWO₄/SBA-15) was successfully synthesized by a fast microwave-assisted method. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen absorption–desorption isotherm, and Fourier transform infrared spectroscopy (FTIR). Our results showed that the MnWO₄/SBA-15 nanocomposites have the ordered hexagonal meso-structure of SBA-15, indicating MnWO₄ nanoparticles were successfully distributed into the channels of SBA-15. The size of MnWO₄ nanoparticles in SBA-15 is significantly smaller than the size of MnWO₄ nanoparticles prepared without SBA-15, indicating that the MnWO₄/SBA15 nanocomposites would be very promising for improving photocatalytic activity of MnWO₄ nanoparticles.     

Adsorption behavior of natural anthocyanin dye on mesoporous silica

Because of its non-toxicity, naturally occurring anthocyanin is potentially suitable as a colorant for foods and cosmetics. To the wider use of the anthocyanin, the immobilization on the inorganic host for an easy handling as well as the improvement of the stability is required. This study is focused on the adsorption of significant amount of the natural anthocyanin dye onto mesoporous silica, and on the stability enhancement of the anthocyanin by the complexation. The anthocyanin has successfully been adsorbed on the HMS type mesoporous silica containing small amount of aluminum. The amount of the adsorbed anthocyanin has been increased by modifying the pore wall with n-propyl group to make the silica surface hydrophobic. The light fastness of the adsorbed anthocyanin has been improved by making the composite with the HMS samples containing aluminum, although the degree of the improvement is not so large. It has been proposed that incorporation of the anthocyanin molecule deep inside the mesopore is required for the further enhancement of the stability.     

Humidity sensitive properties of K-doped mesoporous silica SBA-15

Humidity sensors based on K-doped mesoporous silica SBA-15 were prepared and characterized by XRD, SEM, TEM and N₂ adsorption-desorption isotherms. The humidity sensing test results show that KCl doping improves the sensing characteristic of humidity sensors. The optimal result is obtained via sample 50 wt% KCl-doped SBA-15, which exhibits an excellent linearity in the whole humidity range of 11%-95%. It also shows satisfactory reversibility and fast responses to the environmental moisture. The investigation of the humidity sensitive characteristics of the K-doped SBA-15 sensor shows that this material could have good prospects of application in humidity sensor.     

The instant-direct-templating synthesis of phenyl-functionalized HOM-type mesoporous silica materials

Two kinds of novel phenyl-functionalized mesoporous silica materials have fabricated for the first time by an instant-direct-templating method using poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) and tetraethyl orthosilicate as surfactant template and precursor, respectively. Samples were characterized by Fourier transform infrared spectroscopy, small-angle X-ray diffraction, thermogravimetric analysis, N₂ adsorption-desorption, scanning electron micrography and transmission electron micrography. The results show that phenyl groups are attached covalently to the pore wall of mesoporous materials after modification. The functionalized materials still preserve a desirable ordered hexagonal P6mm and cubic Ia3d mesophase structure, respectively, have high specific surface area, large pore volume and narrow pore size distribution.     

Synthesis,characterization, and photocatalytic properties of core/shell mesoporous silica nanospheres supporting nanocrystalline titania

The facile bulk synthesis of silica nanospheres makes them an attractive support for the transport of chemical compounds such as nanocrystalline titanium dioxide. In this contribution we present a promising route for the synthesis of mesoporous silica nanospheres (m-SiO₂) with diameter in range 200 nm, which are ideal supports for nanocrystalline titanium dioxide (TiO₂). The detailed microscopic and spectroscopic characterizations of core/shell structure (m-SiO₂/TiO₂) were conducted. Moreover, the photocatalytic potential of the nanostructures was investigated via phenol decomposition and hydrogen generation. A clear enhancement of photoactivity in both reactions as compared to commercial TiO₂-Degussa P25 catalyst is detected.     

Facile synthesis and characterization of acid-base bifunctionalized mesoporous silica

A simple acid-base bifunctionalized approach has been developed through grinding the precursors, magnesium and aluminium nitrates, with the as-prepared SBA-15, and then the generation of acid-base active sites and removal of host template were combined into a single step in the subsequent calcination procedure. A series of acid-base bifunctional mesoporous materials MgO-Al₂O₃-SBA-15 (MA-SBA-15) have been successfully synthesized by means of this approach. X-ray diffraction (XRD), high-resolution transmission electron microscopes (HRTEMs), N₂ adsorption, FT-IR spectra, ²⁷Al and ²⁹Si magic-angle-spinning (MAS) NMR, NH₃- and CO₂-temperature programmed desorption (TPD), pyridine adsorption were employed to characterize the resultant mesoporous materials. The results indicate that the guests can be well dispersed in the channel of SBA-15, and the resultant materials exhibit excellent acid-basic properties with well mesoporous backbone, which make it possessing high activity for the synthesis of ethyl methyl carbonate, an important asymmetric carbonate ester compound.