γ-苄基膦酸-磷酸锆的合成、表征及插层性能研究

于220℃水热晶化下制备了高结晶度的γ-ZrP,合成了3种γ-苄基膦酸-磷酸锆层状化合物Zr(PO₄).(H₂PO₄)_0.15(C₆H₅CH₂PO₃H)_0.85·0.4H₂O(1,d=1.86nm),Zr(PO₄)(H₂PO₄)_0.30(C₆H₅CH₂PO₃H)_0.70·0.6H₂O(2,d=1.78nm)和Zr(PO₄)(H₂PO₄)_0.50(C₆H₅CH₂PO₃H)_0.50·0.7H₂O(3,d=1.66nm).用X射线粉末衍射和³¹P固态核磁共振等手段表征其结构,并研究了其与α-苯乙胺的插层性能.     

有玻璃态和液晶态的胆甾烯基苯并菲的合成及介晶性

将盘状液晶基元苯并菲与手性向列型液晶基元胆甾烯基结合的化合物, 可望出现全新的性质. 合成了含有胆甾烯基的苯并菲化合物C₁₈H₆(OC₅H₁₁)₅(OC₅H₁₀COOCh) (2), 2,7-C₁₈H₆(OC₅H₁₁)₄(OC₅H₁₀COOCh)₂ (4), C₁₈H₆(OR)₃(OC_nH_{2nCOO- Ch)3 (R＝C5H11, C7H15, C9H19, C11H23, n＝1, 5, 10) (6a～6f), C18H6(OC5H10COOCh)6 (Ch: cholesteryl) (8). 偏光显微镜和差示扫描量热法对这些化合物的热致介晶性研究结果显示, 化合物 4, 6a～6e具有手性盘状向列相和玻璃态, 8呈现近晶B相(SB)和玻璃态. 随间隔基长度n和烷基链R碳原子数的增加, 化合物玻璃化温度和清亮点呈下降趋势. 随着胆甾烯基数目减少, 化合物的玻璃化温度和清亮点降低.}     

联苯基桥连双核茂锆化合物的合成及催化乙烯聚合

4,4′-二溴联苯与n-BuLi反应得到对-联苯基二锂,再与四甲基环戊烯酮进行羰基加成,酸催化脱水,一步得到对-联苯基桥连四甲基环戊二烯配体4-(C₅Me₄H)C₆H₄-C₆H₄(C₅Me₄H)-4(1).配体1相继与n-BuLi和ZrCl₄反应得到相应的联苯基桥连双(单茂三氯化锆)4-(C₅Me₄ZrCl₃)C₆H₄-C₆H₄(C₅Me₄ZrCl₃)-4,不经分离直接与环戊二烯基锂或茚基锂反应得到相应的双核锆化合物4-(C₅MeZrCl₂Cp′)C₆H₄-C₆H₄·(C₅Me₄ZrCl₂Cp′)-4[Cp′=C₅H₅(2),C₉H₇(3)].研究了在MAO(MethylAluminoxane)助催化下,化合物2和3对乙烯聚合的催化性能.化合物2和3都显示了非常高的催化活性,并在较高的温度下达到最高活性.     

有机锡9-芴酮-4-甲酸酯的合成、结构及抗癌活性

合成了3个有机锡9-芴酮-4-甲酸酯:三苯基锡9-芴酮-4-甲酸酯[(C₆H₅)₃Sn(C₁₄H₇O₃)](1)、三环己基锡9-芴酮-4-甲酸酯[(C₆H₁₁)₃Sn(C₁₄H₇O₃)](2)和三(2-甲基-2-苯基丙基)锡9-芴酮-4-甲酸酯[(C₆H₅C(CH₃)₂CH₂)₃Sn(C₁₄H₇O₃)](3)。通过元素分析、红外光谱、核磁共振谱(¹H、¹³C和¹¹⁹Sn)、热重分析进行了表征;用单晶X射线衍射方法测定了化合物的晶体结构,并对其进行了量子化学计算和体外抗...     

碳氟表面活性剂与碳氢表面活性剂混合水溶液的表面吸附与胶团形成(Ⅳ)——非离子-非离子体系

测定了25℃不同比例的C₁₀F₁₉O(C₂H₄O)₉H与C₈H₁₇C₆H₄O(C₂H₄O)₁₀H混合水溶液的表面张力,研究混合水溶液的表面性质与胶团形成。用两种不同方法计算在表面上的表面成份、分子之间相互作用参数(β_σ)。结果表明,在非离子型碳氟和碳氢表面活性剂混合水溶液中,两种表面活性剂基本上各自形成胶团;表面分子相互作用参数皆为正值;表明此混合体系中碳氟链与碳氢链之间互疏作用的存在。     

系列Ln(Ⅲ)配位聚合物(Ln=Eu,Sm,Tb,Pr,Gd)的合成及其荧光分析

采用水热法合成了4个具有1D结构的Ln(Ⅲ)配位聚合物,[Eu₂(C₉H₇O₂)₆(C₉H₇O₂H)(C₂H₅OH)]n(1)、[Sm(C₉H₇O₂)₃]n(2)、[Tb(C₉H₇O₂)₃]n(3)和[Gd(C₉H₇O₂)₃]n(4)(C₉H₈O₂=肉桂酸)。 通过X射线单晶衍射确定了它们的结构。 这4个Ln(Ⅲ)配合物中,Ln(Ⅲ)的配位数均为9,桥配体均为肉桂酸根,但其配位方式有差异。 对配合物进行了IR、UV-Vis-NIR和荧光光谱等表征。 分析了各配合物的荧光发射,结果表明,在可见区,配合物1发射较明显的红光,配合物2、3发射绿光,配合物4发射蓝光,但很弱。 讨论了具有刚柔相混杂性质的肉桂酸配体对配位聚合物的构筑及稀土离子发光的影响。     

含有酯基及酰胺基柔链的苯并菲盘状液晶的合成、分子间氢键对柱状介晶性的影响

合成了三个系列, 共二十四个有两种不同软链的对称和非对称苯并菲盘状液晶化合物, C₁₈H₆(OR)₃- (OCH₂COOEt)₃, C₁₈H₆(OR)₃(OCH₂COOBu)₃, C₁₈H₆(OR)₃(OCH₂CONHBu)₃, 其中R＝C₅H₁₁, C₆H₁₃, C₇H₁₅, C₈H₁₇. 化合物通过柱层析纯化, 结构通过¹H NMR, IR, 元素分析等确证. 化合物热稳定性通过TGA测定, 并显示出较高的热稳定性. 通过偏光显微镜和差视扫描量热法对这些化合物的热致液晶性进行了研究. 结果显示: 对于苯并菲液晶化合物C₁₈H₆(OR)₃(OCH₂COOEt)₃, 非对称性化合物较之对称异构体化合物有更低的熔点和更高的清亮点, 因而非对称性化合物有更宽的介晶温度范围. 对于分子中含有酰胺基的苯并菲液晶化合物C₁₈H₆(OR)₃(OCH₂CONHBu)₃, 对称化合物有比非对称异构体更高的清亮点和更有序的六方柱状介晶相, 且其与具有同样软链长度的分子中不含酰胺基的化合物系列C₁₈H₆(OR)₃(OCH₂COOBu)₃相比较, 由于柱内分子间氢键的形成, 不仅有更高的熔点和清亮点, 而且有更丰富的柱状介晶相.     

基于磺酰基杯[4]芳烃的Co16笼簇的合成、结构及电化学性质

以氯化钴、 对叔丁基磺酰杯[4]芳烃(H₄TC4A-SO₂)和非对称性3-(1H-四唑-5-基)苯甲酸(H₂L)为原料, 通过溶剂热法合成了一个具有四面体配位笼结构的16核化合物[Co₁₆(TC4A-SO₂)₄(OH)₄(L)₈]·[(C₈H₂₀N)(C₄H₁₂N)₂(C₂H₈N)]·solvent(Co₁₆-TC4A-SO₂). 采用X射线单晶衍射、 X射线粉末衍射、 热重分析、 红外光谱方法对配合物进行了表征. 将Co₁₆-TC4A-SO₂笼簇直接负载到碳纸上(Co₁₆-TC4A-SO₂/CP)用作工作电极, 其对析氧反应(OER)展现出较好的催化性能. 在1 mol/L KOH中, Co₁₆-TC4A-SO₂/CP在343.8 mV的过电位下达到10.0 mA/cm ²电流密度, Tafel斜率为79.31 mV/dec, 并且在20.0 mA/cm ²电流密度下表现出长达48 h的催化稳定性.     

新型金属-双二硫杂戊烯(M-BDT)配合物的合成、表征及X射线的指标化

合成了4个新型NiBDT配位化合物,BDT为具有9个S原子的杂戊烯.元素分析、IR谱、UV谱确定这4个新配合物的化学式分别为[(CH₃)₄N]₂[Ni(C₅S₉)₂](1),[(C₂H₅)₄N]₂·[Ni(C₅S₉)₂](2),[(C₄H₉)₄N]₂[Ni(C₅S₉)₂](3),[(C₆H₅)(CH₃)₃N]₂[Ni(C₅S₉)₂](4).采用Ito法对配合物1的X射线粉末图进行了指标化,确定该晶体属单斜晶系,简单晶格,晶胞参数:a=0.680nm,b=0.714nm,c=2.302nm,γ=111.4°,Z=2.     

氢键稳定的苯并菲盘状液晶的合成及介晶性

盘状液晶分子能自组装成高度有序的六方柱状介晶相. 其各向异性的载流子高速迁移率使其成为较理想的有机光电子材料. 采用分子间氢键锚定柱状相, 获得介晶相温度范围宽、有序度高的苯并菲盘状液晶是本研究的目的. 本文通过分子设计, 合成了3个系列, 共18个有两种不同软链的苯并菲盘状液晶化合物C₁₈H₆(OR)₅(OCH₂COOEt), C₁₈H₆(OR)₅(OCH₂COOBu)和C₁₈H₆(OR)₅(OCH₂CONHBu), 其中R＝C_nH_2n＋1, n＝4～9. 化合物的纯度和结构通过¹H NMR和元素分析确证. 化合物热稳定性通过热重分析(TGA)测定, 并显示出较高的热稳定性. 通过偏光显微镜(POM)和差示扫描量热法(DSC)对这些化合物的热致液晶性进行了研究. 结果显示对于分子中含有酰胺基的苯并菲液晶化合物C₁₈H₆(OR)₅(OCH₂CONHBu), 与具有同样软链长度的分子中不含酰胺键的化合物系列C₁₈H₆(OR)₅(OCH₂COOBu)相比较, 前者由于柱内分子间氢键的形成, 具有更高的熔点和清亮点.     

Degradation Method for Preparing Organo-Arsenic and-Antimony Polytungstates and Comparative Study of Corresponding Polymolybdates

In repeating and extending the syntheses of organo-arsenic polytungstates,we found that the "Degradation Method",taking sodium metatungstate as the starting material,was much more profita-ble.The known compound (CN3H6)5[(C6H5As)2W6O25H]2H2O(1) was read-ily reproduced with a high yield.A new compound (CN3H6)6[(p-OH,m-NO2C6H3As)2W6O25](2) was likewise synthesized.This "Degradation Method" using the reaction of sodium metatungstate with organo-anti-monate led to the isolation of four compounds with definite composition although amorphous in appearance.The preparations of organo-arsenic polymolybdates and organo-antimony polymolybdates were also studied and six new organo-arsenic polymolybdates were isolated: (CN3H6)5[(C6H5As)2MoO25H]H2O(3),(CN3H6)4[(n-C3H7As)2Mo5O21]2H O (4),(CNH)4[(n-C3H7As)2Mo6O24](5),Cs2[(CH3)2AsMo4O15H](6),相似文献   

Systematische untersuchungen über das verhalten von organozinnverbindungen gegenüber flüssigem schwefeldioxid II. Reaktionen von arylstannanen mit flüssigem SO2

The behaviour of tetraarylstannanes, R₄Sn (R = C₆H₅CH₂, C₆H₅, o-, m-, p-CH₃C₆H₄), towards SO₂ under various conditions has now been studied in detail. Compared to aliphatic tetraorganostannanes, the variability of the reaction products is much less, so that in nearly all cases only disulfinates, R₂Sn(O₂SR)₂, are formed. The aromatic tin(IV) mono-, di- and tri-sulfinates are also obtained by metathetical reaction between the corresponding organotin halides and sodium sulfinates. A unique feature of triaryltin chlorides, R₃SnCl (R = C₆H₅, o-, m-, p-CH₃C₆H₄), is their disproportionation in liquid SO₂ leading to disulfinates, R₂Sn(O₂SR)₂, and dichlorides, R₂SnCl₂. (p-CH₃C₆H₄)₂SnCl₂, under more efficient conditions, also accepts SO₂ forming (p-CH₃C₆H₄SO₂)₂SnCl₂. The structural investigations of the newly prepared compounds are carried out on the basis of their IR and ¹H NMR spectra.     

Thermogravimetry of some uranium 8-hydroxyquinolates

The thermogravimetric behaviour of UO₂(C₉H₆NO)₂.C₉H₆NOH and [UO₂(C₉H₆NO)₂]₂.C₉H₆NOH prepared by precipitation from homogeneous solution with 8-acetoxy-quinoline has been found to closely resemble that of UO₂(C₉H₆NO)₂.C₉H₆NOH prepared by direct precipitation of uranium^VI with 8-hydroxyquinoline.     

Isobutene homo- and isobutene-isoprene copolymerization initiated by protic initiators associated with a series of novel, weakly coordinating counteranions

The highly electrophilic borane B(C₆F₅)₃ reacts with a variety of carboxylic acids RCO₂H to form 1:1 and 1:2 adducts [RCO₂H][B(C₆F₅)₃] and [RCO₂H][B(C₆F₅)₃]₂. These adducts exhibit enhanced acidities, and the 1:2 adduct of n-decanoic (stearic) acid in particular is an excellent initiator for the carbocationic polymerization of isobutene and copolymerization of isobutene with isoprene in methylene chloride and methyl chloride. High conversions to high molecular weight polyisobutene and isobutene-isoprene copolymers are obtained at unusually high temperatures, consistent with the anion [n-C₁₇H₃₅CO₂ BC₆F₅)_{3 2}]⁻ being very weakly coordinating. Interestingly, the system also exhibits a surprising, as yet not understood, dependence of polymer molecular weights on the nature of R in methyl chloride.     

The use of thermotropic liquid crystals in organometallic chemistry. Synthesis of new mercury, silver and gold complexes with 4,4′-disubstituted azob

Liquid crystalline 4-XC₆H₄N=NC₆H₄X-4′ [X = C₄H₉ (1a), C_1OH₂₁ (1b), OC₄H₉ (1c), OC₈H₁₇(1d)] can be easily prepared in high yields from the corresponding anilines. In order to study the influence of metals on the thermal properties of these materials, we have obtained adducts [AuCl ₃(4-C₄H₉OC₆H₄N=NC₆H₄OC₄H₉-4′)] (2) and [Ag(OC1O₃)L₂] [L = 4-XC₆H₄N=NC₆H₄X-4′; X = OC₄H, (3a), OC₈H₁₇ (3b)]. The silver adducts show themotropic behaviour. Mercuriation of dialkylazobenzenes 1a-b takes place with [Hg(OAc)₂] and LiCl to give [Hg(R)Cl] [R = C₆H₃(N=NC₆H₄X-4′)-2, X-5; X = C₄H₉ (bpap) (4a), C₁₀H₂₁ (dpap) (4b)] while dialkoxyazobenzenes 1c–d require [Hg (OOCCF₃)₂] to obtain [Hg(R)Cl] [R = C₆H₃(N---NC₆H₄X-4′)-2, X-5; X = OC₄H₉ (bxpap) (4c), OC ₈H₁₇ (4d)]. 4a-c react with NaI to give [HgR₂] [R= bpap (5a), dpap (5b), bxpap (5c), oxpap (5d)l. Both chloroaryl-, 4a and 4c, and diaryl-mercurials, 5a and 5c, act readily as transmetailating agents towards [Me₄N] [AuCl₄] in the presence of [Me₄N]Cl to give [Au(η²-R)Cl₂] [R = bpap (6a), bxpap (6b)]. After reaction of [AuCl ₃(tht)] (tht = tetrahydrothiophene) with [Me₄N]Cl and 4b (1:2:1), [Me₄N][Au(dpap)Cl₃] (7) can be isolated. C---H activati bxpap (8b)]. None of the complexes 4–8 shows mesomorphic behaviour.     

Cyclopentadienylthallium(I) compounds with bulky cyclopentadienyl ligands

Interaction of TlOC₂H₅ with C₅Ph₄H₂, C₅Ph₅H, C₅Ph₄(^tBuPh)H or C₅Bz₅H gives the new cyclopentadienylthallium(I) compounds C₅Ph₄HTl, C₅Ph₅Tl, C₅Ph₄(^tBuPh)Tl, and C₅Bz₅Tl. The compounds have been characterized by IR, NMR and mass spectroscopy.     

Zur oxidativen spaltung von metall—metall-bindungen in metallorganischen verbindungen mittels ferriceniumkationen

The dinuclear organometallic compounds ((C₅H₅Fe(CO)₂)₂, CO₂(CO)₈ and (C₅H₅NiCO)₂) are oxidized by [(C₅H₅)₂Fe]X (X = BF₄, PF₆) in the presence of neutral ligands L to form the cationic organometallic complexes [C₅H₅Fe(CO)₂L]X, [trans-Co(CO)₃L₂]X and [C₅H₅NiL₂]X in high yield.     

Mesogenic behaviour of (4-alkoxybenzylideneamino)bromobenzene, (4-alkoxybenzylideneamino)benzenethiols, and thiolatonickel complexes of the thiols

The synthesis, characterization and mesogenic properties of Schiff base compounds arising from the reaction of 4-alkoxybenzaldehydes with 4-aminothiophenol or 4-bromoaniline are described. Whereas the Schiff base thiol with two benzene rings in the molecule, HSC₆H₄NC(H)C₆H₄OC₁₆H₃₃ (2), is non-mesogenic, the bromo analogue, BrC₆H₄NC(H)C₆H₄OC₁₆H₃₃ (3), is mesogenic. The introduction of a third benzene ring into the molecular architecture of 2 and 3 produced thiol- and bromo-Schiff base compounds, HSC₆H₄NC(H)C₆H₄OC(O)C₆H₄OC₁₆H₃₃ and BrC₆H₄NC(H)C₆H₄OC(O)C₆H₄OC₁₆H₃₃, respectively, that are both mesogenic. The thiol compounds react with nickelocene to form [(η ⁵-C₅H₅)Ni(μ ₂-SC₆H₄NC(H)C₆H₄OC₁₆H₃₃)]₂ and [(η ⁵-C₅H₅)Ni(μ ₂-SC₆H₄NC(H)C₆H₄OC(O)-C₆H₄OC₁₆H₃₃)]₂, but the nickel complexes are not mesogenic.     

Supported transition-metal catalysts for the C---C coupling reaction between ethene and diazoalkanes

The preparation of a series of immobilized transition-metal catalysts are reported. The catalysts were obtained by chemisorption of either rhodium(I) or iridium(I) complexes [MX(C₂H₄)₂]_n (M = Rh, Ir; X = Cl, OAc, acac, f₃-acac, f₆-acac) on SiO₂ or MgO supports. The oxides were also activated by SiCl₄ or TiCl₄ to give support materials in which the acidic nature of the surface is substantially increased. The activity of the immobilized catalysts was tested, particularly in the reaction of ethene with diphenyldiazomethane which yields a mixture of 1.1-diphenylpropene (8) and 1.1-diphenylcyclopropane (9). It was found that the most active and most selective (highest ratio 8:9) catalyst B1 was formed support material B (SiO₂ activated by SiCl₄) and [RhCl(C₂H₄)₂]₂ (1) and that both the activity and selectivity of B1 was comparable with that of complex 1 in solution. In contrast, the supported catalysts A2, D2 and A3, D3 obtained from [Rh(OAc)(C₂H₄)₂]₂ (2) and [Rh(acac)(C₂H₄)₂] (3) were less active than compounds 2 and 3 in solution. The immobilized catalysts A6, A7, D7 and E7, which were generated from the chloro- and acetatoiridium(I) complexes [IrCl(C₂H₄)₂]₂ (6) and [Ir(OAc)(C₂H₄)₂]₂ (7), possessed a lower activity than the rhodium counterparts. With diazoalkanes other than Ph₂CN₂, the activity of the supported catalyst B1 was partly higher and partly lower than that of complex 1 in the homogeneous phase.