Chiral recognition of apple procyanidins by complexation with oxotitanium phthalocyanine

A series of supramolecular complexes formed between oxotitanium(IV) phthalocyanine and apple procyanidins have exhibited characteristic bisignate CD signals in the Q region (ca. 700 nm). The helicity of the oligomeric procyanidins is proposed to be left-handed on the basis of the CD analyses. [structure: see text]     

Graft interpenetrating polymer networks composed of epoxy resin and urethane acrylate resin

For enhancing the interpenetratoin and/or compatibility of the simultaneous interpenetrating networks (SINs) composed of epoxy resin (epoxy) and urethane acrylate resin (UAR), the graft epoxy consisting of different lengths of poly(oxypropylene) (PO) side chains were synthesized and characterized. It was found that the graft epoxy composed of short PO side chains [MW 480, epoxy-g-PO(480)] showed a compatible system while if consisting of longer PO grafts [MW 950, epoxy-g-PO(950)] exhibited a partial microphase separation morphology. DSC measurements as well as the SEM or TEM observation indicated that the interpenetration between the two phases for epoxy/UAR SINs including epoxy-g-PO(480) was improved appreciably due to the excellent miscibility between the PO grafts and PO segments existing in the graft epoxy and the UAR network, respectively. In this case, for SIN(80/20) containing 10 wt % of epoxy-g-PO(480) the tensile strength increases by a factor of 2.70 compared with that of pure epoxy network. However, the improvement of interpenetration and/or compatibility between the two networks as well as the mechanical properties for SINs composed of epoxy-g-PO(950) are limited resulting in the partial microphase separation of epoxy-g-PO(950) network's own self. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3568–3574, 1999     

Synthesis of multicomponent systems composed of one phthalocyanine and four terpyridine ligands

Two phthalocyanine-based multiple ligands were synthesized and characterized. Photochemical and electrochemical properties were measured for zinc(II) phthalocyanines covalently linked with four ruthenium(II) bisterpyridyl complexes. The absorption and electrochemical results are indicative of electronic interaction between two photoactive and redox-active components. Fluorescence spectroscopy of the five nuclear complexes provides evidence of an efficient photoinduced intramolecular energy transfer between the ruthenium-based metal-to-ligand charge-transfer (MLCT) chromophores and the zinc(II) phthalocyanine core. The absorption and fluorescence spectra of the phthalocyanine-based multiple ligands change dramatically as a result of the coordination of metal ions with peripheral terpyridine ligands. This change of fluorescence intensity upon addition of metal ions can apply to an output signal for metal ion sensing. The direct attachment of metal ion receptors with a zinc phthalocyanine core enhanced efficiency of the energy- and electron-transfer reaction from the core to the metal complexes.     

Photosensitive resist system composed of phenolic resin and aromatic azide

Phenolic resins such as cresol novolac and poly-(p-hydroxystyrene) are photosensitized by the addition of an aromatic azide to give negative-working photoresists. The spectral sensitivity can be varied from deep UV to visible region by changing the kind of azide. The system composed of poly(p-hydroxystyrene) and a phenol ester of p-azidobenzenesulfonic acid is expected to be useful in deep UV fine-line lithography. The system containing 23 wt% of p-n-pentylphenol p-azidobenzenesulfonate exhibits a photosensitivity about 50 mJ/cm² at the wavelength of 248 nm.     

Mass spectroscopy of epoxylated novolac resin cured with phthalocyanine tetraamines

Mass spectroscopy was done at different temperatures on epoxylated novolac resin DEN 438 (Dow Chemical Co.) alone, and after curing with various metal(II) phthalocyanine tetraamines (MPTA). Possible modes of fragmentation are given to explain the experimental results. Gas-chromatographic/mass-spectroscopic (GC–MS) analyses of MPTA derivatives indicated the presence of only trace quantities of benzene, aniline, cyanobenzene, and orthodicyanobenzene. The GC–MS studies of the cured DEN 438 epoxy resins indicated that the mechanisms of thermal degradation are qualitatively similar, and some common features were observed in their fragmentation in an electron beam and by thermal degradation. This study is a further assessment of the utility of these phthalocyanine derivatives for curing epoxy resins to produce heat-resistant polymer systems.     

An excellent arsenic(V) sorption behavior of p-tert-butylcalix[8]areneoctamide impregnated resin

The present article describes the arsenic(V) extraction behavior of p-tert-butylcalix[8]areneoctamide (3) and of a resin (4) impregnated with 3. Liquid–liquid and solid–liquid (column sorption) extraction studies were carried out to optimize various experimental parameters such as pH, extraction effeciency and column stability. Thermodynamic studies based upon Temkin and Flory-Hugins models reveal that the sorption was spontaneous and exothermic. The values of correlation coefficients (R2) show that Langmuir and Freundlich isotherm models are best fit to describe the sorption equilibrium. Application of 4 to real samples indicates a slight decrease (5-7%) in extraction efficiency of 4 because of high concentration of total dissolved salts (TDS). It is deduced that 4 is highly effective for the removal of arsenic(V) at a wide range of pH and attains a maximum value, i.e. 99% at pH 4. The impregnated resin is easy to synthesize from cheap materials. It is more efficient and easily regenerable as compared to already reported resins.     

Fabrication and characteristics of organic semiconductor nanoparticles of copper phthalocyanine oligomers

Nanoparticles of copper phthalocyanine oligomers (O-CuPc) with peripheral carboxylic acid groups have successfully been prepared by a simple method of liquid phase direct precipitation in the presence of different surfactants. X-ray diffraction patterns, transmission electron microscopy, and UV-visible spectra are employed to characterize the novel organic nanoparticles. The sizes and size distribution of the resulting O-CuPc nanoparticles show a noticeable dependence on surfactants. Nonionic surfactant is helpful in forming uniform nanoparticles. Also we observe a remarkable nanosize effect of the O-CuPc particles.     

Solvent-stabilized oxovanadium phthalocyanine nanoparticles and their application in xerographic photoreceptors

A stable organic sol of solvent-stabilized oxovanadium phthalocynine (VOPc) nanoparticles with excellent photoconductivity was successfully prepared by ultrasonificating a prepared nanoscopic VOPc powder in1,2-dichloroethane (C(2)H(4)Cl(2)) without any additive. These solvent-stabilized VOPc nanoparticles have a size distribution from 2 to 20 nm with an average diameter of 4.6 nm. The VOPc concentration of these organic sols could be as high as 100 g/L. The nanoscopic VOPc particles were well-dispersed in an insulating polycarbonate (PC) resin, resulting in single-layered photoreceptors with high surface charge durability in the dark and excellent photoconductivity. Based on the light-assisted scanning tunneling microscopy (STM) measurements, the charge transport mechanism of these photoreceptors was ascribed to light-induced enhancement of electron tunneling through the VOPc-nanoparticle/insulator junctions.     

A heterostructure composed of conjugated polymer and copper sulfide nanoparticles

A heterostructure formed by a conjugated polymer and semiconducting nanoparticles was produced. The conjugated polymer was synthesized by oxidative copolymerization of 3-thiopheneacetic acid and 3-hexylthiophene, thus obtaining an amphiphilic polythiophene that allows the formation of a stable polymer layer at the air-water interface. Different numbers of monolayers were deposited on solid substrates. CuS nanoparticles were grown directly in the polymeric matrix using the carboxylic groups as nucleation centers. The reactions were monitored by quartz crystal microbalance, Brewster angle, and fluorescence microscopy. The heterostructure showed increased conductivity as compared to the pristine polymer.     

Mixed-matrix membranes composed of Matrimid and mesoporous ZSM-5 nanoparticles

Mixed-matrix membranes were prepared from Matrimid^® and mesoporous ZSM-5 nanoparticles containing crystalline ZSM-5. The ideal selectivity for H₂/N₂ separation increased from 79.6 for pure Matrimid^® to 143 at 10% loading, while the selectivity of O₂/N₂ increased from 6.6 for pure Matrimid^® to 10.4 at 20% loading. The ideal H₂/CH₄ separation factor increased from 83.3 to 169 at 20% loading. The results suggest that the mesopores of the ZSM-5 material provide good contact between the nanoparticles and the polymer, since the polymer chains can penetrate into the mesopores. The micropores of ZSM-5 crystals provide size and shape selectivity.     

Image processing of the fractal aggregates composed of nanoparticles

The image-processing algorithms are described for chain branched aggregates composed of spherical particles. The processing procedure is based on setting off circles corresponding to the primary particles (spherules) in the images, followed by the construction of a digital model representing a set of diameters and coordinates of all spherules and their centers. The computational procedures are considered in which the digital model is used to calculate a series of parameters characterizing the aggregate’s structure and morphology, including fractal dimension for an individual aggregate and average dimension for a set of aggregates. The “clearance radius” of the aggregate is calculated as a half of geometric mean of the aggregate’s length L and width W. To determine L and W, the algorithm based on searching for the minimum-area (LW) rectangle circumscribing the aggregate’s contour is proposed.     

Highly dispersive Ag nanoparticles on functionalized graphene for an excellent electrochemical sensor of nitroaromatic compounds

A facile carbon radical reaction procedure and a chemical reduction method were proposed to synthesize Ag nanoparticles on functionalized graphene with uniform, high dispersion and excellent stability. The resultant material showed excellent electrocatalytic activity to nitroaromatic compounds and high sensitivity to the detection of nitroaromatic compounds.     

Deposition of nanoparticles in filters composed of permeable porous fibers

The diffusion deposition of nanoparticles is studied from a flow at low Reynolds numbers in model filters composed of permeable circular porous fibers. The field of particle concentration is calculated and the capture coefficient is determined for a cell, as well as the isolated row of parallel fibers within a wide range of Peclet numbers (Pe) depending on the fiber permeability. It is shown that at Pe > 1, the diffusion capture coefficient η increases with permeability, while at Pe → ∞, it tends toward the limiting value, which is equal to the gas flow rate through the porous fiber. The capture coefficients calculated from a cell model and for a row of fibers are almost equal to each other. The diffusion deposition of aerosol particles in the highest penetration range is calculated with an allowance for their finite sizes and it is shown that the radii of most penetrable particles decrease with an increase in fiber permeability.     

Fabrication of monodisperse silica-polymer core-shell nanoparticles with excellent antimicrobial efficacy

Monodisperse nanoparticles with antimicrobial polymer shells were fabricated using a seeded copolymerization; they exhibited excellent antibacterial activities against gram-positive bacteria as well as gram-negative bacteria.     

Water soluble carbon nanoparticles: hydrothermal synthesis and excellent photoluminescence properties

Water-soluble carbon nanoparticles (CNPs) were fabricated by a facile, one step hydrothermal synthetic route using acid/alkali as additives. These CNPs emit bright photoluminescence (PL) covering the entire visible-near infrared (NIR) spectral range. PL measurements confirmed that the CNPs have up-conversion of PL properties, and that the NIR PL of the CNPs can also be observed by NIR excitation. Control experiments indicated that different additives can strongly affect the PL properties of the CNPs. With a combination of free dispersion in water and attractive PL properties, these CNPs hold promise for applications in nanotechnology.     

Synthesis of porous zinc gallate prisms composed of highly oriented nanoparticles by an in situ conversion reaction

Porous ZnGa(2)O(4) prisms assembled by highly oriented nanoparticles have been fabricated by an in situ chemical conversion approach. We report, for the first time, that a solid α-Ga(2)O(3) precursor can be directly converted into ZnGa(2)O(4) rather than through the intermediate GaOOH. Based on a detailed study of the evolution of ZnGa(2)O(4) prisms, a growth mechanism is proposed for the in situ conversion reaction. During this conversion process, the precursor morphology can be highly retained, which is attributed to the similar atomic arrangements of the Ga and O atoms and excellent matching of the lattice spacing between the α-Ga(2)O(3) and ZnGa(2)O(4) prisms. The direct reaction between the precursor α-Ga(2)O(3) and Zn(2+) ions is more efficient than that between the byproduct GaOOH and Zn(2+) ions. Moreover, the photoluminescent color of the ZnGa(2)O(4) phosphor can be tuned by doping with Mn(2+) ions. Efficient energy transfer (ET) from the host lattice to the Mn(2+) centers is observed, whereas ET from the defects to the Mn(2+) ions is prohibited. The fabricated ZnGa(2)O(4) products have potential in the field of display applications.     

Facile synthesis and excellent catalytic activity of gold nanoparticles on graphene oxide

For the first time,Au nanoparticles on graphene oxide（GO-AuNPs） were successfully fabricated without applying any additional reductants,just by the redox reaction between AuCl₄^-1 and GO.Their structure was characterized by transmission electron microscopy and X-ray powder diffraction.The results show that flower-like AuNPs were successfully dispersed on GO surface.Importantly,they showed a high catalytic activity for the Suzuki-Miyaura coupling reaction in an aqueous medium.     

Unusual mesomorphic behaviour of an ethynyl-substituted phthalocyanine

An ethynyl-substituted nickel(II) phthalocyanine has been synthesised and its thermotropic properties studied; optical microscopy, differential scanning calorimetry (DSC) and X-ray diffraction (XRD) techniques revealed an unusual mesomorphic behaviour observed for the first time in phthalocyanine systems where each disk of the hexagonal columnar mesophase is formed by two ethynyl-substituted phthalocyanine units.