Preparation and characterization of activated carbon fibers supported with silver metal for antibacterial behavior

In this work, the effect of immersion in silver nitrate solution on activated carbon fibers (ACFs) was investigated in relation to adsorption behavior and antibacterial activity of ACFs supported with silver (ACF/Ag). The pore and surface properties were studied in terms of BET volumetric measurement with nitrogen adsorption, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The antibacterial activities of ACF/Ag were studied in broth dilution tests against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) from a point of view of water purification. As an experimental result, the silver content of ACF/Ag increased with increasing concentration of silver nitrate. It was found that the micropore structure slightly decreased as the silver nitrate concentration increased. Otherwise, it was revealed that the ACF/Ag possessed a strong antibacterial activity and an inhibitory effect for the growing of E. coli and S. aureus, respectively. Silver content on ACF/Ag decreased rapidly because of rough morphology of silver particles in water erosion.     

载银磷酸活化剑麻基活性炭纤维的抗菌性能研究

本文利用磷酸化方法，制备各种剑麻基活性炭纤维，并利用活性炭纤维的氧化还原特性及吸附性能，在其上负载金属银，研究并比较了这些载银活性炭纤维对大肠杆菌和金黄色葡萄球菌的杀灭作用，结果表明，磷酸浓度，活化方法，活化时间，纤维的比表面积等因素的均对材料的抗菌性能有一定的影响，磷酸活化的活性炭纤维表现出强的抗菌杀菌能力，高浓度磷酸活化后的纤维抗菌能力有所提高，并且抗菌能力随活化时间的延长而增加，抗菌前后纤维上负载的银未曾大量脱落，经5次抗菌试验后材料仍显示出很强的抗菌能力。     

Influence of anodic treatment on heavy metal ion removal by activated carbon fibers

In this work, the effect of electrochemical oxidation treatment on activated carbon fibers (ACFs) was studied in the context of Cr(VI), Cu(II), and Ni(II) adsorption behavior. Ten weight percent phosphoric acid (A-ACFs) and ammonia (B-ACFs) were used for acidic and basic electrolytes, respectively. Surface properties of ACFs were determined by X-ray photoelectron spectroscopy (XPS). The specific surface area and the pore structure were evaluated from nitrogen adsorption data at 77 K. As a result, the electrochemical oxidation treatment led to an increase in the amount of oxygen-containing functional groups. Also, the adsorption capacity of the electrochemically oxidized ACFs was improved in the order B-ACFs > A-ACFs > untreated-ACFs, in spite of a decrease in specific surface area which resulted from pore blocking by functional groups and pore destruction by acidic electrolyte. It was clearly found that the heavy metal ions were largely influenced by the functional groups on the ACF surfaces.     

STUDIES ON THE PREPARATION OF ZINC-CONTAINING ACTIVATED CARBON FIBERS AND THEIR ANTIBACTERIAL ACTIVITY

1. INTRODUCTION Microbial pollution will bring about various problems in industry and other vital fields, such as causing decomposing of materials, harming people抯 health. In order to reduce these problems, new antibacterial materials have been demanded. Recently, much attention has been paid to inorganic materials including zinc oxide [1~4]. These inorganic antibacterial materials are now substituting for organic materials to avoid releasing noxious organic molecules harmful to humans;…     

STUDIES ON THE PREPARATION OF ZINC-CONTAINING ACTIVATED CARBON FIBERS AND THEIR ANTIBACTERIAL ACTIVITY

Several kinds of activated carbon fibers, using sisal fiber as precursors, were preparedwith steam activation or with ZnCl2 activation. Zinc or its compounds were dispersed in them. Theantibacterial activities of these activated carbon fibers were determined and compared. The researchresults showed that these sisal based activated carbon fibers supporting zinc have strongerantibacterial activity against Escherichia coli and S. aureus. The antibacterial activity is related tothe precursors, the pyrolysis temperature, and the zinc content. In addition, small quantity of silversupported on zinc-containing ACFs will greatly enhance the antibacterial activity of ACFs.     

Synthesis of cobalt(II) and nickel(II) complexes of Ceclor (cefaclor) and preliminary experiments on their antibacterial character

Cobalt(II) and nickel(II) complexes of the antibacterial drug Ceclor have been synthesized and characterized on the basis of their elemental analysis, molar conductance, magnetic moment and electronic and infrared spectral data. These complex have been, then subjected to screening for their antibacterial properties against bacterial species such as Streptococcus pyogenes, Streptococcus pneumoniae, Staphylococcus aureus and Escherichia coli. In comparison to uncomplexed Ceclor, the metal complexes have been shown to be more antibacterial.     

依诺沙星与铁配合物的合成、表征及其生物活性

由水热法合成了依诺沙星铁配合物,用固体培养基平板药敏试验方法测定了配合物的体外抗菌活性。结果表明,合成的依诺沙星铁配合物对金黄色葡萄球菌、肺炎链球菌、绿脓杆菌、白色念珠菌都具有抗菌活性,但只有对金黄色葡萄球菌和绿脓杆菌的抗菌活性强于配体本身。     

Adsorption properties of iodine-doped activated carbon fiber

Iodine-doped activated carbon fibers (ACFs) were prepared by the iodine immersion method on pitch-based ACF. Then iodine-doped ACFs were heated in argon at 523 K for 4 h and at 673 K for 2 h. The iodine structure of the resultant iodine-doped ACFs was examined using X-ray photoelectron spectroscopy. The micropore structures were determined by N(2) adsorption at 77 K. The surface area and micropore volume of iodine-doped ACFs are less than those of pristine ACFs. However, the pore width does not change with the iodine doping. The effects of iodine doping on adsorption properties of ACFs for H(2)O and NO at 303 K were examined. The iodine doping affected remarkably the adsorptivities of ACFs for H(2)O and NO. In particular, iodine-doped ACFs treated at 673 K show enhanced adsorptivities for H(2)O and NO. This result suggests that iodine molecules doped on the micropores should be charged by heat treatment at 673 K.     

Preparation and Characterization of Antibacterial Polyacrylonitrile-based Activated Carbon Fiber Supporting Nano-ZnO

Polyacrylonitrile(PAN)-based activated carbon fiber(PACF) supporting nano-ZnO(PACF /nano-ZnO) was prepared by spin, pretreatment, carbonization, and KOH chemical activation at an activation temperature of 950 ℃ for 40 min. Nano-ZnO content, distribution and antibacterial properties of the PACF/nano-ZnO were studied. The pore structure and surface properties of the PACF/nano-ZnO were studied by Brunauer-Emmett-Teller(BET), N₂/77 K isothermal adsorption. The specific surface area increased markedly after the activation process and it was several hundred times greater than that before the process. The PACF/nano-ZnO shows a strong adsorption for Staphylococcus aureus(S. aureus) and Escherichia coli(E. coli) and antibacterial activity against them. As an experimental result, antibacterial properties of PACF/nano-ZnO increased with increasing the concentration of nano-ZnO particles, which suggests it is a promising antibacterial material.     

Formaldehyde removal by Rayon-based activated carbon fibers modified by <Emphasis Type="Italic">P</Emphasis>-aminobenzoic acid

We impregnated Rayon-based activated carbon fibers (ACFs) by p-aminobenzoic acid (PABA) and systematically investigated their porous structure, surface chemistry, and formaldehyde removal behavior. Using standard nitrogen adsorption analysis, we found that the specific surface area, the micropore volume, and the total pore volume decreased with increasing concentration of PABA. Through elemental analysis and X-ray photoelectron spectroscopy, it was found that some nitrogen-containing functional groups presented on the surface of modified Rayon ACFs. The modified Rayon-based ACFs showed much higher adsorption capacity and longer breakthrough time for formaldehyde than did as-prepared Rayon-based ACF. We proposed that the improvement of formaldehyde removal by modified ACFs was attributed to the combined effects of physisorption contributed by pore structures and chemisorption contributed by the N-containing functional groups, whereas there was only physisorption between the as-prepared ACF and formaldehyde molecules.     

Structural and biological behaviors of some nonionic Schiff-base amphiphiles and their Cu(II) and Fe(III) metal complexes

Novel series of nonionic Schiff bases was synthesized and characterized using microelemental analysis, FTIR and (1)H NMR spectra. These Schiff bases and their complexes with Cu and Fe have been evaluated for their antibacterial activity against bacterial species such as Staphylococcus aureus, Pseudomonas aureus, Candida albi, Bacillus subtilis and Escherichia coli and their fungicidal activity against Aspcrgillus niger and Aspcrgillus flavus. The results of the biocidal activities showed high potent action of the synthesized Schiff bases towards both bacteria and fungi. Furthermore, complexation of these Schiff bases by Cu(II) and Fe(III) show the metal complexes to be more antibacterial and antifungal than the Schiff bases. The results were correlated to the surface activity and the transition metal type. The mode of action of these complexes was discussed.     

新型吡唑Schiff碱及金属配合物的合成和抑菌活性

以3-氨基-4-氰基吡唑和芳醛为原料合成了10个新型吡唑Schiff碱及铜(II)、镍(II)、锌(II)、钴(II) 4个金属配合物. 用元素分析, IR, 1H NMR及单晶解析表征了Schiff碱及金属配合物的结构. 测定了Schiff碱及金属配合物对金黄色葡萄球菌、大肠杆菌、枯草杆菌和绿脓杆菌的抑菌活性. 生物活性研究表明, Schiff碱及金属配合物对金黄色葡萄球菌、大肠杆菌和绿脓杆菌都有较好的抑菌效果, 其中铜(II)和锌(II)配合物对金黄色葡萄球菌和大肠杆菌的抑菌活性最好.     

Antimicrobial activities of indole alkaloids from Tabernaemontana catharinensis

Tabernaemontana catharinensis root bark ethanol extract, EB2 fraction and the MMV alkaloid (12-methoxy-4-methylvoachalotine) were evaluated for their antimicrobial activities. T. catharinensis ethanol extract was effective against both strains of the dermatophyte Trichophyton rubrum at concentrations of 2.5 mg/mL (wild strain) and 1.25 mg/mL (mutant strain), while the EB2 fraction and MMV alkaloid showed a strong antifungal activity against wild and mutant strains with MIC values of <0.02 and 0.16 mg/mL, respectively. The EB2 fraction showed a strong antibacterial activity against ATCC strains of S. aureus, S. epidermidis, E. coli and P. aeruginosa with MICs from <0.02 to 0.04 mg/mL, as well as against resistant clinical isolates species of Enterococcus sp, Klebsiella oxytoca, Citrobacter, K. pneumoniae, P. mirabilis, S. aureus, S. epidermidis, E. coli and P. aeruginosa with MIC values ranging from 0.04 to 0.08 mg/mL. The MMV alkaloid presented a MIC of 0.16 mg/mL against the strains of S. aureus and E. coli ATCC. For the resistant clinical isolates Enterococcus sp, Citrobacter, S. aureus, S. epidermidis, E. coli and P. aeruginosa the MIC of MMV ranged from 0.08 to 0.31 mg/mL. The chromatography analysis of the EB2 fraction revealed the presence of indole alkaloids, including MMV, possibly responsible for the observed antimicrobial activity.     

Studies on pore structures and surface functional groups of pitch-based activated carbon fibers

The present study concerns the physical activation and chemical oxidation of pitch-based activated carbon fibers (ACFs) as ways to improve the adsorption properties. The surface oxides of the ACFs studied were determined by Boehm's titration and the pore structures were studied by the BET method with N(2)/77 K adsorption. Also, the adsorption properties of the ACFs were investigated with chromium ion adsorption by different adsorption models. As a result, it was observed that carboxyl groups were largely created after nitric acid treatment on ACFs. The affinity for chromium ions increases with increasing specific surface area, micropore volume, and surface functionalities of ACFs as the activation time increases.     

Antimicrobial activity and pollen composition of honey samples collected from different provinces in Turkey

The antibacterial activity of honey samples from different sources were collected and investigated against Bacillus cereus, Staphylococcus aureus ATCC 25923, Pseudomonas aeruginosa ATCC 27853, Klebsiella pneumoniae ATCC 27736, Morganella morganii, Micrococcus luteus NRRL B-4375, Escherichia coli ATCC 35218, and Candida albicans. Pathogens exhibited different sensitivities towards the honey samples. The results showed that majority of the honey samples (75%) generally inhibitied the bacteria tested. The honey samples which were obtained from Izmir (samples 1 and 2) proved more effective as inhibitors against P. aeruginosa, E. coli, and S. aureus. The honey which was obtained from Mu?la (sample 5) exhibited high anticandidal activity on C. albicans. A comparison of the honey samples on the basis of pollen content revealed that they were heterofloral, and samples which had highest antibacterial activity against P. aeruginosa, E. coli, and S. aureus were dominated by pollen from Chenopodiaceae/Amaranthaceae (sample 1), and Trifolium, Trigonella, Cyperaceae, Zea mays and Anthemis taxa (sample 2). The honey proved more effective on bacteria than antibiotics.     

Antibacterial activity and cytocompatibility of chitosan-N-hydroxy-2,3-propyl-N methyl-N,N-diallylammonium methyl sulfate

A water-soluble quaternary ammonium salt of chitosan, chitosan-N-hydroxy-2,3-propyl-N-methyl-N,N-diallylammonium methyl sulfate (MDAACS), was synthesized by reacting chitosan with methyl diallyl ammonium salt (MDAA). The results of water contact angle and swelling ratio showed that the membrane of MDAACS was more hydrophilic than chitosan. The antibacterial activities of MDAACS against Staphylococcus aureus and Klebsiella pneumoniae were evaluated with the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). The results showed that the antibacterial activity of MDAACS was higher than that of chitosan. The cytocompatibility was evaluated in vitro with L929 fibroblast proliferation based on MTT colorimetric assay. The results showed that cell growth was much higher on MDAACS than on chitosan.     

Exploring the DNA binding mode of transition metal based biologically active compounds

Few novel 4-aminoantipyrine derived Schiff bases and their metal complexes were synthesized and characterized. Their structural features and other properties were deduced from the elemental analysis, magnetic susceptibility and molar conductivity as well as from mass, IR, UV-vis, (1)H NMR and EPR spectral studies. The binding of the complexes with CT-DNA was analyzed by electronic absorption spectroscopy, viscosity measurement, and cyclic voltammetry. The interaction of the metal complexes with DNA was also studied by molecular modeling with special reference to docking. The experimental and docking results revealed that the complexes have the ability of interaction with DNA of minor groove binding mode. The intrinsic binding constants (K(b)) of the complexes with CT-DNA were found out which show that they are minor groove binders. Gel electrophoresis assay demonstrated the ability of the complexes to cleave the pUC19 DNA in the presence of AH(2) (ascorbic acid). Moreover, the oxidative cleavage studies using distamycin revealed the minor groove binding for the newly synthesized 4-aminoantipyrine derived Schiff bases and their metal complexes. Evaluation of antibacterial activity of the complexes against Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Staphylococcus epidermidis, and Klebsiella pneumoniae exhibited that the complexes have potent biocidal activity than the free ligands.     

Quantum sieving effect of modified activated carbon fibers on H2 and D2 adsorption at 20 K

Quantum sieving of activated carbon fibers (ACFs) and their fluorides was observed for H(2) and D(2) adsorption at 20 K. Fluorination reduced the slit-shaped pore width of ACFs by 0.2 nm. The activated carbon fibers can act as highly efficient quantum sieves for H(2) and D(2), because the effective size of an H(2) molecule is larger than that of a D(2) molecule due to the uncertainty principle and the molecular size difference between H(2) and D(2) is significant in the micropore space. The D(2)/H(2) selectivity of ACFs evaluated by ideal adsorption solution theory was larger than that of the fluorinated ACFs.     

O-羧甲基壳聚糖稀土配合物的抑菌活性及与DNA的相互作用

用体外抑菌法研究了O-羧甲基壳聚糖镧、O-羧甲基壳聚糖钕配合物对大肠杆菌(E.coli)、金黄色葡萄球菌(St.aureus)、阴沟肠杆菌(E.cloacae)、枯草芽孢杆菌(B.subtilis)、粪肠杆菌(E.faecalis)和肺炎克罗伯杆菌(S.pneumoniae)的抑菌活性。采用紫外光谱研究了两种O-羧甲基壳聚糖稀土配合物与小牛胸腺DNA的相互作用。结果表明:O-羧甲基壳聚糖稀土配合物均有抑菌活性,且O-羧甲基壳聚糖稀土配合物与DNA以静电作用为主,能使DNA双螺旋结构破坏。     

A study on NO removal of activated carbon fibers with deposited silver nanoparticles

In this study, activated carbon fibers (ACFs), onto which silver (Ag) nanoparticles have been introduced by an electroplating technique, were used to remove NO. Surface properties of the ACFs were determined by X-ray diffraction and scanning electron microscopy. N2 adsorption isotherms at 77 K were investigated by BET and t-plot methods to characterize the specific surface areas and pore volumes, and NO removal efficiency was confirmed by a gas chromatographic technique. As for the experimental results, Ag content on the ACFs increased with plating time. However, adsorption properties such as the BET specific surface area and the total pore volume were somewhat decreased in the presence of Ag nanoparticles. NO removal efficiency of all Ag-ACFs was higher than that of untreated ACFs and increased with Ag content. However, a decrease in the extent of NO removal was shown in the excessively plated ACFs, which might be associated with the blocking of the micropores in the carbon; therefore, an optimal Ag content needs to exist in the presence of initially well-developed micropores to lead to an increase in the efficient NO removal ability of the ACF.