Restricted rotation in unbridged sandwich complexes: rotational behavior of closo-[Co(eta 5-NC4H4)(C2B9H11)] derivatives

Rotation about the centroid/metal/centroid axis in ferrocene is facile; the activation energy is 1-5 kcal mol(-1). The structurally similar sandwich complexes derived from closo-[3-Co(eta5-NC4H4)-1,2-C2B9H11] (1) have a different rotational habit. In 1, the cis rotamer in which the pyrrolyl nitrogen atom bisects the carboranyl cluster atoms is 3.5 kcal mol(-1) more stable in energy than the rotamer that is second lowest in energy. This cis rotamer is wide, spanning 216 degrees , and may be split into three rotamers of almost equal energy by substituting the N and the carboranyl carbon atoms adequately. To support this statement, closo-[3-Co(eta5-NC4H4)-1,2-(CH3)2-1,2-C2B9H9] (2), closo-[3-Co(eta5-NC4H4)-1,2-(mu-CH2)3-1,2-C2B9H9] 3, 2-->BF3, and 3-->BF3 have been prepared. Two rotamers are found at low temperature for 2-->BF(3) and 3-->BF3. Compounds 2, 3, and 1-->BF3 behave similarly to 1. Rotational energy barriers and the relative populations of the different energy states are calculated from 1H DNMR spectroscopy (DNMR, dynamic NMR). These results agree with those of semiempirical calculations. Without exception, the cis rotamer is energetically the more stable. The fixed conformation of 1 assists in elucidating the rotational preferences of the [3,3'-Co(1,2-C2B9H11)2]- ion in the absence of steric hindrance; the [3,3'-Co(1,2-C2B9H11)2]- ion is commonly accepted to present a cisoid orientation. Complex 1 is electronically similar to the [3,3'-Co(1,2-C2B9H11)2]- ion. Both have heteroatoms in the pi ligands, and they have the same electronegativity difference between the constituent atoms. This leads to a view of the [NC4H4]- as [7,8-C2B9H11]2- ion, with no steric implications. Therefore the [3,3'-Co(1,2-C2B9H11)2]- ion should be considered to have a cisoid structure, and the different rotamers observed to be the result of steric factors and of the interaction of the counterion with either B-H groups and/or ancillary ligands. The rotamer adopted is the one with the atoms holding the negative charges furthest apart.     

Cooperative metal-boron interactions in the reaction of nido-1,2-(Cp*RuH)2B3H7, Cp* = eta5-C5Me5, with HC(triple bond)CPh

Products of the reaction of nido-1,2-(CpRuH)(2)B(3)H(7), 1, and phenylacetylene demonstrate the ways in which cluster metal and main group fragments can combine with an alkyne. Observed at 22 degrees C are (a) reduction to mu-alkylidene Ru-B bridges (isomers nido-1,2-(CpRu)(2)(1,5-mu-C{Ph}Me)B(3)H(7), 2, and nido-1,2-(CpRu)(2)(1,5-mu-C{CH(2)Ph}H)B(3)H(7), 3), (b) reduction to exo-cluster alkyl substituents on boron (nido-1,2-(CpRuH)(2)-3-CH(2)CH(2)Ph-B(3)H(6), 4), (c) cluster insertion with extrusion of a BH(2) fragment into an exo-cluster bridge (nido-1,2-(CpRu)(2)(mu-H)(mu-BH(2))-4-or-5-Ph-4,5-C(2)B(2)H(5), 5), (d) combined insertion with BH(2) extrusion and reduction (nido-1,2-(CpRu)(2)(mu-H)(mu-BH(2))-3-CH(2)CH(2)Ph-5-Ph-4,5-C(2)B(2)H(4), 6), (e) insertion and loss of borane with and without reduction (nido-1,2-(CpRu)(2)-5-Ph-4,5-C(2)B(2)H(7), 7, and isomers nido-1,2-(CpRu)(2)-3-CH(2)CH(2)Ph-4-(and-5-)Ph-C(2)B(2)H(6), 8 and 9), and (f) insertion and borane loss plus reduction (nido-1,2-(CpRu)(2)-3-(trans-CH=CHPh)-5-Ph-4,5-C(2)B(2)H(6), 10). Along with 7, 8, and 10, the reaction at 90 degrees C generates products of insertion and nido- to closo-cluster closure (closo-4-Ph-1,2-(CpRuH)(2)-4,6-C(2)B(2)H(3), 11, closo-1,2-(CpRuH)(2)-3-CH(2)CH(2)Ph-5-Ph-7-CH(2)CH(2)Ph-4,5-C(2)B(3)H(2), 12, closo-1,2-(CpRuH)(2)-5-Ph-4,5-C(2)B(3)H(4), 13, and isomers closo-1,2-(CpRuH)(2)-3-and-7-CH(2)CH(2)Ph-5-Ph-4,5-C(2)B(3)H(3), 14 and 15). The clusters with an exo-cluster bridging BH(2) groups are shown to be intermediates by demonstrating that the major products 5 and 6 rearrange to 13 and convert to 14, respectively. 14 then isomerizes to 15, thus connecting low- and high-temperature products. Finally, all available information shows that the high reactivity of 1 with alkynes can be associated with the "extra" two Ru-H hydrides on the framework of 1 which are required to meet the nido-cluster electron count.     

Self-assembly of mercaptane-metallacarborane complexes by an unconventional cooperative effect: a C-H...S-H...H-B hydrogen/dihydrogen bond interaction

The existence of a dihydrogen bond (S-H...H-B) and its combination with a C-H...S hydrogen bond in an unusual cooperative effect are demonstrated from a combination of experimental and theoretical methods. This cooperative effect seems to be responsible for self-assembly of mercaptane-metallacarborane complexes such as closo-[3-Ru(eta6-C6H6)-8-HS-1,2-C2B9H10] (1) and closo-[3-Co(eta5-C5H5)-8-HS-1,2-C2B9H10] (3), which present identical supramolecular two-dimensional polymeric networks. The findings, besides documenting structurally the first S-H...(H-B)2 dihydrogen bond and the unconventional cooperative ability of a boron-attached SH group, prove that substituted carboranes have the potential to serve as building blocks for assembling complex structures.     

Controlled direct synthesis of C-mono- and C-disubstituted derivatives of [3,3'-Co(1,2-C2B9H11)2]- with organosilane groups: theoretical calculations compared with experimental results

Mono- and dilithium salts of [3,3'-Co(1,2-C(2)B(9)H(11))(2)](-), (1(-)), react with different chlorosilanes (Me(2)SiHCl, Me(2)SiCl(2), Me(3)SiCl and MeSiHCl(2)) with an accurate control of the temperature to give a set of novel C(c)-mono- (C(c) = C(cluster)) and C(c)-disubstituted cobaltabis(dicarbollide) derivatives with silyl functions: [1-SiMe(2)H-3,3'-Co(1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))](-) (3(-)); [1,1'-mu-SiMe(2)-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (4(-)); [1,1'-mu-SiMeH-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (5(-)); [1-SiMe(3)-3,3'-Co(1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))](-) (6(-)) and [1,1'-(SiMe(3))(2)-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (7(-)). In a similar way, the [8,8'-mu-(1',2'-C(6)H(4))-1,1'-mu-SiMe(2)-3,3'-Co(1,2-C(2)B(9)H(9))(2)](-) (8(-)); [8,8'-mu-(1',2'-C(6)H(4))-1,1'-mu-SiMeH-3,3'-Co(1,2-C(2)B(9)H(9))(2)](-) (9(-)) and [8,8'-mu-(1',2'-C(6)H(4))-1-SiMe(3)-3,3'-Co(1,2-C(2)B(9)H(9))(1',2'-C(2)B(9)H(10))](-) (10(-)) ions have been prepared from [8,8'-mu-(1',2'-C(6)H(4))-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (2(-)). Thus, depending on the chlorosilane, the temperature and the stoichiometry of nBuLi used, it has been possible to control the number of substituents on the C(c) atoms and the nature of the attached silyl function. All compounds were characterised by NMR and UV/Vis spectroscopy and MALDI-TOF mass spectrometry; [NMe(4)]-3, [NMe(4)]-4 and [NMe(4)]-7 were successfully isolated in crystalline forms suitable for X-ray diffraction analyses. The 4(-) and 8(-) ions, which contain one bridging -mu-SiMe(2) group between each of the dicarbollide clusters, were unexpectedly obtained from the reaction of the monolithium salts of 1(-) and 2(-), respectively, with Me(2)SiHCl at -78 degrees C in 1,2-dimethoxyethane. This suggests that an intramolecular reaction has taken place, in which the acidic C(c)-H proton reacts with the hydridic Si-H, with subsequent loss of H(2). Some aspects of this reaction have been studied by using DFT calculations and have been compared with experimental results. In addition, DFT theoretical studies at the B3 LYP/6-311G(d,p) level of theory were applied to optimise the geometries of ions 1(-)-10(-) and calculate their relative energies. Results indicate that the racemic mixtures, rac form, are more stable than the meso isomers. A good concordance between theoretical studies and experimental results has been achieved.     

Syntheses of functionalized ferratricarbadecaboranyl complexes

The reactions of nitriles (RCN) with arachno-4,6-C(2)B(7)H(12)(-) provide a general route to functionalized tricarbadecaboranyl anions, 6-R-nido-5,6,9-C(3)B(7)H(9)(-), R = C(6)H(5) (2(-)), NC(CH(2))(4) (4(-)), (p-BrC(6)H(4))(Me(3)SiO)CH (6(-)), C(14)H(11) (8(-)), and H(3)BNMe(2)(CH(2))(2) (10(-)). Further reaction of these anions with (eta(5)-C(5)H(5))Fe(CO)(2)I yields the functionalized ferratricarbadecaboranyl complexes 1-(eta(5)-C(5)H(5))-2-C(6)H(5)-closo-1,2,3,4-FeC(3)B(7)H(9) (3), 1-(eta(5)-C(5)H(5))-2-NC(CH(2))(4)-closo-1,2,3,4-FeC(3)B(7)H(9) (5), 1-(eta(5)-C(5)H(5))-2-[(p-BrC(6)H(4))(Me(3)SiO)CH]-closo-1,2,3,4-FeC(3)B(7)H(9) (7), 1-(eta(5)-C(5)H(5))-2-C(14)H(11)-closo-1,2,3,4-FeC(3)B(7)H(9) (9), and 1-(eta(5)-C(5)H(5))-2-H(3)BNMe(2)(CH(2))(2)-closo-1,2,3,4-FeC(3)B(7)H(9) (11). Reaction of 11 with DABCO (triethylenediamine) resulted in removal of the BH(3) group coordinated to the nitrogen of the side chain, giving 1-(eta(5)-C(5)H(5))-2-NMe(2)(CH(2))(2)-closo-1,2,3,4-FeC(3)B(7)H(9) (12). Crystallographic studies of complexes 3, 5, 7, 9, and 11 confirmed that these complexes are ferrocene analogues in which a formal Fe(2+) ion is sandwiched between the cyclopentadienyl and tricarbadecaboranyl monoanionic ligands. The metals are eta(6)-coordinated to the puckered six-membered face of the tricarbadecaboranyl cage, with the exopolyhedral substituents bonded to the low-coordinate carbon adjacent to the iron.     

Novel titanium complexes of a multidentate dicarbollide ligand. Synthesis and structural characterization of a constrained geometry complex

The multidentate dicarbollide ligand nido-7,8-(NMe2CH2)2-7,8-C2B9H11 has been prepared, structurally characterized, and employed in the preparation of the novel mono- and trimetallic titanium complexes [eta5:eta1-(NMe2CH2)C2B9H9CH2NMe2]Ti(NMe2)2 and [eta5:eta1-[(NMe2CH2)C2B9H9CH2NMe2]Ti(NMe2)]2-mu3-O-Ti(NMe2)2.     

Self‐Assembly of Halogenated Cobaltacarborane Compounds: Boron‐Assisted C?H⋅⋅⋅X?B Hydrogen Bonds?

Full structural characterisation and complete synthetic procedures for three monohalogenated cobaltacarborane compounds closo-[3-Co(eta5-C5H5)-8-X-1,2-C2B9H10] (X=Cl (1), Br (2), I (3)) and the dibromo derivative closo-[3-Co(eta5-C5H5)-8,9-Br2-1,2-C2B9H9] (4) are reported. The supramolecular structures of 1, 3, and 4 reveal the existence of intermolecular C--HX--B interactions. The role of these interactions has been investigated through a CSD search and subsequent analysis of the reported crystalline compounds. The results show that halogens become reasonably good hydrogen-bond acceptors when bonded to boron and, in this respect, are comparable in strength to metal-bound halogens.     

Additive character of electron donation by methyl substituents within a complete series of polymethylated [1-(η6-Me9n)C6H(6-n))-closo-1,2,3-FeC2B9H11] complexes. Linear correlations of the NMR parameters and Fe(II/III) redox potentials with the number of arene methyls

A systematic method for the incorporation of the {(η(6)-Me(n)C(6)H(6-n))Fe} fragment into the dicarbollide cage was developed based on reactions between [(η(6)-Me(n)C(6)H(6-n))(2)Fe][PF(6)](2) salts (1) and Tl(2)[nido-7,8-C(2)B(9)H(11)]. These reactions proceed with elimination of one arene ligand to generate a complete series of the neutral [1-(η(6)-Me(n)C(6)H(6-n))-closo-1,2,3-FeC(2)B(9)H(11)] (2) complexes with n = 1-6 in yields ranging 15-70% depending on the arene. The structures of mesitylene and pentamethylbenzene complexes were established by X-ray diffraction analyses. All compounds were characterized by (11)B and (1)H NMR measurements, mass spectra, melting points and elemental analyses. Correlations between selected (1)H and (11)B NMR parameters and the Fe(II/III) redox potentials and the number of arene methyls for complexes 2 are linear. These facts establish direct evidence for a strictly additive character of electron donation by the methyl substituents to the arene ring and further to the Fe center and the second (dicarbollide) ligand.Correlations between the number of arene methyls (n) and selected (1)H and (11)B NMR parameters or the Fe(II/III) redox potentials for complexes [1-(η(6)-MenC(6)H(6-n))-closo-1,2,3-FeC(2)B(9)H(11)] are of strictly linear character.     

Homolysis of the Ln-N (Ln = Yb, Eu) bond. Synthesis, structural characterization and catalytic activity of ytterbium(II) and europium(II) complexes with methoxyethyl functionalized indenyl ligands

The interaction of methoxyethyl functionalized indene compounds (C(9)H(6)-1-R-3-CH(2)CH(2)OMe, R =t-BuNHSiMe(2)(1), Me(3)Si (2), H (3)) with [(Me(3)Si)(2)N](3)Ln(mu-Cl)Li(THF)(3)(Ln=Yb (4), Eu (5)) produced a series of new ytterbium(II) and europium(II) complexes via tandem silylamine elimination/homolysis of the Ln-N (Ln=Yb, Eu) bond. Treatment of the lanthanide(III) amides [(Me(3)Si)(2)N](3)Ln(mu-Cl)Li(THF)(3)(Ln=Yb (4), Eu (5) with 2 equiv. of, 1,2 and 3, respectively, produced, after workup, the ytterbium(II) complexes [eta5:eta1-Me(2)Si(MeOCH(2)CH(2)C(9)H(5))(NHBu-t)](2)Yb(II) (6), (eta5:eta1-MeOCH(2)CH(2)C(9)H(5)SiMe(3))(2)Yb(II) (7), (eta5:eta1-MeOCH(2)CH(2)C(9)H(6))(2)Yb(II)(8) and the corresponding europium(II) complexes [eta5:eta1-Me(2)Si(MeOCH(2)CH(2)C(9)H(5))(NHBu-t)](2)Eu(II)(9), (eta5:eta1-MeOCH(2)CH(2)C(9)H(5)SiMe(3))(2)Eu(II)(10) and (eta5:eta1-MeOCH(2)CH(2)C(9)H(6))(2)Eu(II)(11) in moderate to good yield. In contrast, interaction of the corresponding indene compounds 1, 2 or 3 with the lanthanide amides [(Me(3)Si)(2)N](3)Ln (Ln = Yb, Eu) was not observed, while addition of 0.5 equiv. of anhydrous LiCl to the corresponding reaction mixture produced, after workup, the corresponding ytterbium(II) or europium(II) complexes. All the new compounds were fully characterized by spectroscopic and elemental analyses. The structures of complexes, and were determined by single-crystal X-ray analyses. The catalytic activity of all the ytterbium(II) and europium(II) complexes on MMA polymerization was examined. It was found that all the ytterbium(II) and europium(II) complexes can function as single-component MMA polymerization catalysts. The temperature, solvent and ligand effects on the catalytic activity were studied.     

Formation,structure and reactivity of boryloxycarbyne complexes of group 6 metals

Reaction of the diborane(4) B(2)(NMe(2))(2)I(2) with two equivalents of K[(eta(5)-C(5)H(5))M(CO)(3)] (M=Cr, Mo, W) yielded the dinuclear boryloxycarbyne complexes [[(eta(5)-C(5)H(5))(OC)(2)M(triple bond)CO](2)B(2)(NMe(2))(2)] (4 a, M=Mo; b, M=W; c, M=Cr), which were fully characterised in solution by multinuclear NMR methods. The Mo and W complexes 4 a, b proved to be kinetically favoured products of this reaction and underwent quantitative rearrangement in solution to afford the complexes [[(eta(5)-C(5)H(5))(OC)(2)M(triple bond)CO]B(NMe(2))B(NMe(2))[M(CO)(3)(eta(5)-C(5)H(5))]] (5 a, M=Mo; b, M=W); 5 a was characterised by X-ray crystallography in the solid state. Corresponding reactions of B(2)(NMe(2))(2)I(2) with only one equivalent of K[(eta(5)-C(5)H(5))M(CO)(3)] (M=Mo, W) initially afforded 1:1 mixtures of the boryloxycarbyne complexes 4 a, b and unconsumed B(2)(NMe(2))(2)I(2). This mixture, however, yielded finally the diborane(4)yl complexes [(eta(5)-C(5)H(5))(OC)(3)M[B(NMe(2))B(NMe(2))I]] (6 a, M=Mo; b, M=W) by [(eta(5)-C(5)H(5))(OC)(3)M] transfer and rearrangement. Density functional calculations were carried out for 4 c and 5 a, b.     

Chemistry of mangana- and rhenatricarbadecaboranyl tricarbonyl complexes: evidence for an associative mechanism of ligand substitution involving an eta6-eta4 cage-slippage process analagous to eta5-eta3-cyclopentadienyl ring-slippage

The reaction of the tricarbadecaboranyl anion, 6-Ph-nido-5,6,9-C(3)B(7)H(9)(-), with M(CO)(5)Br [M = Mn, Re] or [(eta(6)-C(10)H(8))Mn(CO)(3)(+)]BF(4)(-) yielded the half-sandwich metallatricarbadecaboranyl analogues of (eta(5)-C(5)H(5))M(CO)(3) [M = Mn, Re]. For both 1,1,1-(CO)(3)-2-Ph-closo-1,2,3,4-MC(3)B(7)H(9) [M = Mn (2) and Re (3)], the metal is eta(6)-coordinated to the puckered six-membered open face of the tricarbadecaboranyl cage. Reactions of 2 and 3 with isocyanide at room temperature produced complexes 8-(CNBu(t))-8,8,8-(CO)(3)-9-Ph-nido-8,7,9,10-MC(3)B(7)H(9) [M = Mn (4), Re (5)], having the cage eta(4)-coordinated to the metal. Photolysis of 4 and 5 then resulted in the loss of CO and the formation of 1-(CNBu(t))-1,1-(CO)(2)-2-Ph-closo-1,2,3,4-MC(3)B(7)H(9) [M = Mn, Re (6)], where the cage is again eta(6)-coordinated to the metal. Reaction of 2 and 3 with 1 equiv of phosphine at room temperature produced the eta(6)-coordinated monosubstituted complexes 1,1-(CO)(2)-1-P(CH(3))(3)-2-Ph-closo-1,2,3,4-MC(3)B(7)H(9) [M = Mn (7), Re (9)] and 1,1-(CO)(2)-1-P(C(6)H(5))(3)-2-Ph-closo-1,2,3,4-MC(3)B(7)H(9) [M = Mn (8), Re (10)]. NMR studies of these reactions at -40 degrees C showed that substitution occurs by an associative mechanism involving the initial formation of intermediates having structures similar to those of the eta(4)-complexes 4 and 5. The observed eta(6)-eta(4) cage-slippage is analogous to the eta(5)-eta(3) ring-slippage that has been proposed to take place in related substitution reactions of cyclopentadienyl-metal complexes. Reaction of 9 with an additional equivalent of P(CH(3))(3) gave 8,8-(CO)(2)-8,8-(P(CH(3))(3))(2)-9-Ph-nido-8,7,9,10-ReC(3)B(7)H(9) (11), where the cage is eta(4)-coordinated to the metal. Photolysis of 11 resulted in the loss of CO and the formation of the disubstituted eta(6)-complex 1-CO-1,1-(P(CH(3))(3))(2)-2-Ph-closo-1,2,3,4-ReC(3)B(7)H(9) (12).     

Acetylene to vinylidene rearrangements on electron rich d6 metal centers: a density functional study

The acetylene to vinylidene isomerization on several Ru(II) d(6) metal fragments with different electron richness of the metal center has been investigated by means of density functional theory calculations. We considered the [(eta(5)-C(5)Me(5))Ru(dippe)](+), [(eta(5)-C(5)Me(5))Ru(dmpe)](+), [(eta(5)-C(5)H(5))Ru(PMe(3))(2)](+), [(eta(6)-C(6)Me(6))(PMe(3))ClRu](+), [(eta(5)-C(5)H(5))Ru(CO)(PPh(3))](+) and [eta(6)-C(6)H(6))(PMe(3))ClRu](+), species which are quite common in the chemistry of cationic Ru(II) complexes and span a wide range of electron-richness. For each of the considered fragments, the minima on the potential energy surfaces for the two possible isomerization mechanisms, i.e. through a direct 1,2-hydrogen shift or through a hydrido-alkynyl intermediate, have been localized. A linear correlation has been found between the C=C stretching frequencies of the vinylidene complexes, as an estimate of the electron richness, and the stability of the corresponding hydrido-alkynyl intermediates. For the most electron-rich among the considered fragments, [(Cp*)(dippe)Ru(HCCH)](+), the hydrido-alkynyl species has been found essentially isoenergetic with the alkyne complex (only 1.9 kcal mol(-1) higher), in agreement with the experimental evidence showing for this system an equilibrium between these two species. For the same [(Cp*)(dippe)Ru](+) fragment, a detailed analysis of the reaction profiles for the two possible acetylene rearrangement pathways has been performed. Our results show that once the eta(2)-C-H coordinated acetylene intermediate is accessed, the system can easily evolve towards a hydrido-alkynyl intermediate, this process being kinetically favored with respect to the direct 1,2-shift leading to the vinylidene product.     

Synthesis, structure, and dynamics of nickelacarboranes incorporating the [nido-7,9-C(2)B(9)H(11)](2)(-) ligand

The nickelacarboranes [NEt(4)][2-(eta(3)-C(3)H(4)R)-closo-2,1,7-NiC(2)B(9)H(11)] (R = H (1a), Ph (1b)) have been synthesized via reaction between [Na](2)[nido-7,9-C(2)B(9)H(11)] and [Ni(2)(micro-Br)(2)(eta(3)-C(3)H(4)R)(2)] in THF (THF = tetrahydrofuran), followed by addition of [NEt(4)]Cl. Protonation of 1a in the presence of a donor ligand L affords the complexes [2,2-L(2)-closo-2,1,7-NiC(2)B(9)H(11)] (L = CO (2), CNBu(t) (3)). Addition of PEt(3) (1 equiv) to 2 produces quantitative conversion to [2-CO-2-PEt(3)-closo-2,1,7-NiC(2)B(9)H(11)], 4. Species 2-4 exhibit in solution hindered rotation of the NiL(2) fragment with respect to the eta(5)-C(2)B(9) cage unit. Protonation of 1a in the presence of a diene affords the neutral complexes [2-(eta(2):eta(2)-diene)-closo-2,1,7-NiC(2)B(9)H(11)] (diene = C(5)Me(5)H (5), dcp (6), cod (7), nbd (8), chd (9), and cot (10a); dcp = dicyclopentadiene, cod = 1,5-cyclooctadiene, nbd = norbornadiene, chd = 1,3-cyclohexadiene, and cot = cyclooctatetraene). Variable temperature (1)H NMR experiments show that the [Ni(diene)] fragments are freely rotating even at 193 K. A small quantity of the di-cage species [2,2'-micro-(1,2:5,6-eta-3,4:7,8-eta-cot)-(closo-2,1,7-NiC(2)B(9)H(11))(2)] (10b) is formed as a coproduct in the synthesis of 10a. This species can be rationally synthesized by protonation of 1a and subsequent addition of 10a.     

Small Heteroborane Cluster Systems. 6. Mössbauer Effect Study of Iron Substituted Small Metallaborane Clusters

The M?ssbauer effect spectra for a series of small [Fe(eta(5)-C(5)H(5))(CO)(x)()] substituted metallaborane complexes are reported, where x = 1 or 2. The pentaborane cage in compounds [Fe(eta(5)-C(5)H(5))(CO)(2)B(5)H(7)P(C(6)H(5))(2)] (1), [Fe(eta(5)-C(5)H(5))(CO)(2)B(5)H(8)] (2), and [(Fe(eta(5)-C(5)H(5))(CO)(2))(2)B(5)H(7)] (3) was found to act as a significantly better donor ligand than the ligands in a comparison group of previously reported [Fe(eta(5)-C(5)H(5))(CO)LX] complexes, where L = CO or PPh(3) and X = halide, pseudohalide, or alkyl ligands. These metallaborane complexes were found to most resemble their silyl analogues in M?ssbauer spectral parameters and the electronic distribution around the iron centers. In addition, the M?ssbauer data showed that the [&mgr;-2,3-(P(C(6)H(5))(2)B(5)H(7)](-) ligand was a superior donor to the corresponding unsubstituted [B(5)H(8)](-) ligand. The M?ssbauer spectral results for the metallaborane complexes studied were found to be in general agreement with the anticipated donor and accepting bonding considerations for the cage ligands based upon their infrared and (11)B NMR spectra and X-ray structural features. The M?ssbauer data for the [Fe(eta(5)-C(5)H(5))(CO)B(4)H(6)(P(C(6)H(5))(2))] (4) and [Fe(eta(5)-C(5)H(5))(CO)B(3)H(7)(P(C(6)H(5))(2))] (5) complexes, in comparison with compound 1, showed that as the borane cage becomes progressively smaller, it becomes a poorer donor ligand. A qualitative relationship was found between the observed M?ssbauer isomer shift data and the number of boron cage vertices for the structurally related [Fe(eta(5)-C(5)H(5))(CO)(x)B(y)H(z)P(C(6)H(5))(2)] complexes, where x = 1 or 2, y = 3-5, and z = 6 or 7. The X-ray crystallographic data for compounds 1, 2, 5, and [Fe(eta(5)-C(5)H(5))(CO)B(5)H(8)] (6) were also found to agree with the trends observed in the M?ssbauer spectra which showed that the s-electron density on the iron nucleus increases in the order 5 < 6 < 2 < 1. The X-ray crystal structure of complex 2 is also reported. Crystallographic data for 2: space group P2(1)/c (No. 14, monoclinic), a = 6.084(3) ?, b = 15.045(8) ?, c = 13.449(7) ?, beta = 99.69(5) degrees, V = 1213(1) ?(3), Z = 4 molecules/cell.     

Thermal activation of hydrocarbon C-H bonds initiated by a tungsten allyl complex

Gentle thermolysis of the allyl complex, CpW(NO)(CH(2)CMe(3))(eta(3)-H(2)CCHCMe(2)) (1), at 50 degrees C in neat hydrocarbon solutions results in the loss of neopentane and the generation of transient intermediates that subsequently activate solvent C-H bonds. Thus, thermal reactions of 1 with tetramethylsilane, mesitylene, and benzene effect single C-H activations and lead to the exclusive formation of CpW(NO)(CH(2)SiMe(3))(eta(3)-H(2)CCHCMe(2)) (2), CpW(NO)(CH(2)C(6)H(3)-3,5-Me(2))(eta(3)-H(2)CCHCMe(2)) (3), and CpW(NO)(C(6)H(5))(eta(3)-H(2)CCHCMe(2)) (4), respectively. The products of reactions of 1 with other methyl-substituted arenes indicate an inherent preference of the system for the activation of stronger arene sp(2) C-H bonds. For example, C-H bond activation of p-xylene leads to the formation of CpW(NO)(CH(2)C(6)H(4)-4-Me)(eta(3)-H(2)CCHCMe(2)) (5) (26%) and CpW(NO)(C(6)H(3)-2,5-Me(2))(eta(3)-H(2)CCHCMe(2)) (6) (74%). Mechanistic and labeling studies indicate that the transient C-H-activating intermediates are the allene complex, CpW(NO)(eta(2)-H(2)C=C=CMe(2)) (A), and the eta(2)-diene complex, CpW(NO)(eta(2)-H(2)C=CHC(Me)=CH(2)) (B). Intermediates A and B react with cyclohexene to form CpW(NO)(eta(3)-CH(2)C(2-cyclohexenyl)CMe(2))(H) (18) and CpW(NO)(eta(3)-CH(2)CHC)(Me)CH(2)C(beta)H(C(4)H(8))C(alpha)H (19), respectively, and intermediate A can be isolated as its PMe(3) adduct, CpW(NO)(PMe(3))(eta(2)-H(2)C=C=CMe(2)) (20). Interestingly, thermal reaction of 1 with 2,3-dimethylbut-2-ene results in the formation of a species that undergoes eta(3) --> eta(1) isomerization of the dimethylallyl ligand following the initial C-H bond-activating step to yield CpW(NO)(eta(3)-CMe(2)CMeCH(2))(eta(1)-CH(2)CHCMe(2)) (21). Thermolyses of 1 in alkane solvents afford allyl hydride complexes resulting from three successive C-H bond-activation reactions. For instance, 1 in cyclohexane converts to CpW(NO)(eta(3)-C(6)H(9))(H) (22) with dimethylpropylcyclohexane being formed as a byproduct, and in methylcyclohexane it forms the two isomeric complexes, CpW(NO)(eta(3)-C(7)H(11))(H) (23a,b). All new complexes have been characterized by conventional spectroscopic methods, and the solid-state molecular structures of 2, 3, 4, 18, 19, 20, and 21 have been established by X-ray crystallographic analyses.     

Thermal activation of hydrocarbon C-H bonds by tungsten alkylidene complexes.

Thermal activation of CpW(NO)(CH(2)CMe(3))(2) (1) in neat hydrocarbon solutions transiently generates the neopentylidene complex, CpW(NO)(=CHCMe(3)) (A), which subsequently activates solvent C-H bonds. For example, the thermolysis of 1 in tetramethylsilane and perdeuteriotetramethylsilane results in the clean formation of CpW(NO)(CH(2)CMe(3))(CH(2)SiMe(3)) (2) and CpW(NO)(CHDCMe(3))[CD(2)Si(CD(3))(3)] (2-d(12)), respectively, in virtually quantitative yields. The neopentylidene intermediate A can be trapped by PMe(3) to obtain CpW(NO)(=CHCMe(3))(PMe(3)) in two isomeric forms (4a-b), and in benzene, 1 cleanly forms the phenyl complex CpW(NO)(CH(2)CMe(3))(C(6)H(5)) (5). Kinetic and mechanistic studies indicate that the C-H activation chemistry derived from 1 proceeds through two distinct steps, namely, (1) rate-determining intramolecular alpha-H elimination of neopentane from 1 to form A and (2) 1,2-cis addition of a substrate C-H bond across the W=C linkage in A. The thermolysis of 1 in cyclohexane in the presence of PMe(3) yields 4a-b as well as the olefin complex CpW(NO)(eta(2)-cyclohexene)(PMe(3)) (6). In contrast, methylcyclohexane and ethylcyclohexane afford principally the allyl hydride complexes CpW(NO)(eta(3)-C(7)H(11))(H) (7a-b) and CpW(NO)(eta(3)-C(8)H(13))(H) (8a-b), respectively, under identical experimental conditions. The thermolysis of 1 in toluene affords a surprisingly complex mixture of six products. The two major products are the neopentyl aryl complexes, CpW(NO)(CH(2)CMe(3))(C(6)H(4)-3-Me) (9a) and CpW(NO)(CH(2)CMe(3))(C(6)H(4)-4-Me) (9b), in approximately 47 and 33% yields. Of the other four products, one is the aryl isomer of 9a-b, namely, CpW(NO)(CH(2)CMe(3))(C(6)H(4)-2-Me) (9c) ( approximately 1%). The remaining three products all arise from the incorporation of two molecules of toluene; namely, CpW(NO)(CH(2)C(6)H(5))(C(6)H(4)-3-Me) (11a; approximately 12%), CpW(NO)(CH(2)C(6)H(5))(C(6)H(4)-4-Me) (11b; approximately 6%), and CpW(NO)(CH(2)C(6)H(5))(2) (10; approximately 1%). It has been demonstrated that the formation of complexes 10 and 11a-b involves the transient formation of CpW(NO)(CH(2)CMe(3))(CH(2)C(6)H(5)) (12), the product of toluene activation at the methyl position, which reductively eliminates neopentane to generate the C-H activating benzylidene complex CpW(NO)(=CHC(6)H(5)) (B). Consistently, the thermolysis of independently prepared 12 in benzene and benzene-d(6) affords CpW(NO)(CH(2)C(6)H(5))(C(6)H(5)) (13) and CpW(NO)(CHDC(6)H(5))(C(6)D(5)) (13-d(6)), respectively, in addition to free neopentane. Intermediate B can also be trapped by PMe(3) to obtain the adducts CpW(NO)(=CHC(6)H(5))(PMe(3)) (14a-b) in two rotameric forms. From their reactions with toluene, it can be deduced that both alkylidene intermediates A and B exhibit a preference for activating the stronger aryl sp(2) C-H bonds. The C-H activating ability of B also encompasses aliphatic substrates as well as it reacts with tetramethylsilane and cyclohexanes in a manner similar to that summarized above for A. All new complexes have been characterized by conventional spectroscopic methods, and the solid-state molecular structures of 4a, 6, 7a, 8a, and 14a have been established by X-ray diffraction methods.     

Palladium-Catalyzed Coupling of Ethynylated p-Carborane Derivatives: Synthesis and Structural Characterization of Modular Ethynylated p-Carborane Molecules

Methodology leading to a new class of rodlike p-carborane derivatives is described, involving the palladium-catalyzed coupling of B-iodinated p-carboranes with terminal alkynes. The products of these reactions contain an alkyne substituent at a boron vertex of the p-carborane cage. Reaction of closo-2-I-1,12-C(2)B(10)H(11) (1) with closo-2-(C&tbd1;CH)-1,12-C(2)B(10)H(11) (3) in the presence of pyrrolidine and catalytic quantities of bis(triphenylphosphine)palladium dichloride and cupric iodide yields 1,2-(closo-1',12'-C(2)B(10)H(11)-2'-yl)(2) acetylene (4). Oxidative coupling of 3 in the presence of cupric chloride in piperidine affords 1,4-(closo-1',12'-C(2)B(10)H(11)-2'-yl)(2)-1,3-butadiyne (5). Reaction of 2 molar equiv. of closo-2,9-I(2)-1,12-C(2)B(10)H(10) (6) withcloso-2,9-(C&tbd1;CH)(2)-1,12-C(2)B(10)H(10) (7) in the presence of pyrrolidine and catalytic quantities of bis(triphenylphosphine)palladium dichloride and cupric iodide yields closo-2,9-(closo-2'-I-9'-C&tbd1;C-1',12'-C(2)B(10)H(10))(2)-1,12-C(2)B(10)H(10) (8), a rigid, iodine-terminated carborod trimer in which the p-carborane cages are linked at the 2 and 9 B-vertices by alkyne (C&tbd1;C) bridges. The molecular structures of 5 and the previously described closo-2,9-(C&tbd1;CSiMe(3))(2)-1,12-C(2)B(10)H(10) (9) have been determined by X-ray crystallography. Crystallographic data are as follows: for 5, monoclinic, space group P2/a, a = 12.352(6) ?, b = 14.169 (6) ?, c = 12.384(5) ?, beta = 109.69(2) degrees, V = 2041 ?(3), Z = 4, R = 0.098, R(w)( )()= 0.135; for 9, monoclinic, space group C2/m, a = 22.111(4) ?, b = 7.565(2) ?, c = 6.943(2) ?, beta = 107.871(8) degrees, V = 1105 ?(3), Z = 2, R = 0.059, R(w)( )()= 0.090.     

Luminescent nido-carborane-diphosphine anions [(PR2)2C2B9H10](-) (R = Ph, (i)Pr). Modification of their luminescence properties upon formation of three-coordinate gold(I) complexes

The free nido-diphosphine anions [(PR(2))(2)C(2)B(9)H(10)](-) (R = Ph, (i)Pr) show luminescence properties whereas the closo-diphosphines [(PR(2))(2)C(2)B(10)H(10)] do not. Four families of three-coordinate complexes of stoichiometry [Au[(PR(2))(2)C(2)B(10)H(10)]L]OTf (L = tertiary phosphine) and [Au[(PR(2))(2)C(2)B(9)H(10)]L] have been studied in order to analyze the influence of the closo- or nido-nature of the diphosphine, the monophosphine coordinated to gold and the substituent at the diphosphine on the luminescence of the complexes. Only the nido-derivatives show luminescence. The maxima of the emissions are shifted to lower energies than those of the corresponding free nido-diphosphines. When the substituent at the diphosphine is phenyl, a new emission appears, which has been assigned as arising from a metal to ligand charge transfer [Au-->pi(L)] excited state.     

Gold(I) Complexes with the nido-Diphosphino Ligand [7,8-(Ph(2)P)(2)-7,8-C(2)B(9)H(10)](-). Preparation of the First Metallocarborane Complex of this Ligand. Crystal Structures of [Au{(PPh(2))(2)C(2)B(9)H(10)}(PPh(3))].CH(2)Cl(2) and [Au(2){(PPh(2))(2)C(2)B(9)H(10)}(2){(PPh(2))(2)(CH(2))(3)}].3Me(2)CO

The reaction of [AuCl(PR(3))] with [1,2-(Ph(2)P)(2)-1,2-C(2)B(10)H(10)] in refluxing ethanol proceeds with partial degradation (removal of a boron atom adjacent to carbon) of the closo species to give [Au{(PPh(2))(2)C(2)B(9)H(10)}(PR(3))] [PR(3) = PPh(3) (1), PPh(2)Me (2), PPh(2)(4-Me-C(6)H(4)) (3), P(4-Me-C(6)H(4))(3) (4), P(4-OMe-C(6)H(4))(3) (5)]. Similarly, the treatment of [Au(2)Cl(2)(&mgr;-P-P)] with [1,2-(Ph(2)P)(2)-1,2-C(2)B(10)H(10)] under the same conditions leads to the complexes [Au(2){(PPh(2))(2)C(2)B(9)H(10)}(2)(&mgr;-P-P)] [P-P = dppe = 1,2-bis(diphenylphosphino)ethane (6), dppp = 1,3-bis(diphenylphosphino)propane (7)], where the dppe or dppp ligands bridge two gold nido-diphosphine units. The reaction of 1 with NaH leads to removal of one proton, and further reaction with [Au(PPh(3))(tht)]ClO(4) gives the novel metallocarborane compound [Au(2){(PPh(2))(2)C(2)B(9)H(9)}(PPh(3))(2)] (8). The structure of complexes 1 and 7 have been established by X-ray diffraction. [Au{(PPh(2))(2)C(2)B(9)H(10)}(PPh(3))] (1) (dichloromethane solvate) crystallizes in the monoclinic space group P2(1)/c, with a = 17.326(3) ?, b = 20.688(3) ?, c = 13.442(2) ?, beta = 104.710(12) degrees, Z = 4, and T = -100 degrees C. [Au(2){(PPh(2))(2)C(2)B(9)H(10)}(2)(&mgr;-dppp)] (7) (acetone solvate) is triclinic, space group P&onemacr;, a = 13.432(3) ?, b = 18.888(3) ?, c = 20.021(3) ?, alpha = 78.56(2) degrees, beta = 72.02(2) degrees, gamma = 73.31(2) degrees, Z = 2, and T = -100 degrees C. In both complexes the gold atom exhibits trigonal planar geometry with the 7,8-bis(diphenylphosphino)-7,8-dicarba-nido-undecaborate(1-) acting as a chelating ligand.