Application of the ultrasonic velocity profile method to the mapping of liquid metal flows under the influence of a non-uniform magnetic field

An ultrasonic velocity profile (UVP) method has been successfully applied to the investigation of a liquid metal channel flow under the influence of an inhomogeneous magnetic field. Using velocity profiles obtained by the ultrasonic velocimeter and their numerical post processing, two-dimensional time-averaged flow maps were efficiently produced. A single transducer immersed directly into the working fluid was used in order to simplify alignment of measurement lines and avoid the undesirable refraction of the acoustic beam on the walls. An M-shaped flow and wake behind a magnetic obstacle were reconstructed as the patterns of shear and large-scale vortical flows.     

Flow mapping of the mercury flow

 An ultrasonic velocity profile (UVP) method has been successfully applied to the investigation of mercury flow contained in a stainless steel wall in the configuration of a liquid metal target of a spallation neutron source called SINQ at the Paul Scherrer Institute. One- and two-dimensional stationary flow has been fully investigated in the form of velocity profiles. Using velocity profiles obtained by the UVP method, a two-dimensional flow map was efficiently produced. A steady state vector map was successfully made and time dependent flow mapping is feasible. Received: 17 May 2000 / Accepted: 27 December 2000 Published online: 29 November 2001     

Kinematic characteristics of magnetic fluid sloshing in a rectangular container subject to non-uniform magnetic fields

 The dynamic behavior of a magnetic fluid in a laterally vibrated rectangular container subject to a non-uniform vertical magnetic field has been investigated. Flow behavior was observed using the ultrasound velocity profile measuring technique. The effect of the magnetic field on the resonant frequency of the fluid-container system is discussed. Experimental results are compared with the results obtained from nonlinear theory using the perturbation method. Received: 27 May 1997/Accepted: 26 March 1998     

On non-linear magnetohydrodynamic problems of an Oldroyd 6-constant fluid

In this work we develop a mathematical model to predict the velocity profile for an unidirectional, incompressible and steady flow of an Oldroyd 6-constant fluid. The fluid is electrically conducting by a transverse magnetic field. The developed governing equation is non-linear. This equation is solved analytically to obtain the general solution. The governing non-linear equation is also solved numerically subject to appropriate boundary conditions (three cases of typical plane shearing flows) by an iterative technique with the finite-difference discretizations. A parametric study of the physical parameters involved in the problems such as the applied magnetic field and the material constants is conducted. The obtained results are illustrated graphically to show salient features of the solutions. Numerical results show that the applied magnetic field tends to reduce the flow velocity. Depending on the choice of the material parameters, the fluid exhibits shear-thickening or shear-thinning behaviours.     

Measurement of viscous flow velocity and flow visualization using two magnetic resonance imagers

The accuracies of measuring the velocity field using clinical and research magnetic resonance imagers are compared. The flow velocity of a fluid simulating blood in a carotid artery model connected to a programmable pump was measured. Using phase-contrast magnetic resonance tomography, the velocity distributions in the carotid artery model were obtained and compared with the analytical solution for viscous liquid flow in a cylindrical tube (Poiseuille flow). It is found that the accuracy of the velocity measurement does not depend on the field induction and spatial resolution of the imagers.     

Rheological study of concentrated suspensions in pressure-driven shear flow using a novel in-line ultrasound Doppler method

 In this work a novel in-line non-invasive rheological measuring technique is developed and tested in pilot plant and industrial-scale applications. The method is based on a combination of the ultrasonic pulsed echo Doppler technique (UVP) and pressure difference method (PD). The rheological flow properties are derived from simultaneous recording and on-line analysis of the velocity profiles across the tube channel and related radial shear stress profiles calculated from the pressure loss along the flow channel. It is shown that the in-line UVP-PD technique allows for the non-invasive rheological flow behaviour characterization of non-transparent and highly concentrated suspensions. Received: 8 May 2000 / Accepted: 22 June 2001 Published online: 29 November 2001     

Flow measurement on an oscillating pipe flow near the entrance using the UVP method

 The authors have carried out a study to investigate and clarify the characteristics of purely oscillating pipe flows over the developing region. The main objective of this study is to establish the method of time-dependent velocity profiles obtained by the ultrasonic velocity profile (UVP) measurement method. First, the relationship between the test fluids and the microparticles, as reflectors of ultrasonic pulses, was investigated. In addition, the relationship between the sound speeds of the test fluids and the wall materials was studied. Second, the UVP was used to obtain the instantaneous velocity profiles in oscillating pipe flows, and the developing characteristics of the flows were analyzed. Finally, the “entrance length” (by analogy with a unidirectional pipe flow) required for oscillating pipe flows was analyzed by examining the amplitude of the harmonic spectral components of the oscillating frequency. A fast Fourier transform (FFT) is proposed as the applicable method to estimate the “entrance length”. From the Fourier transform of the velocity on the centerline, nonlinear oscillation of fluid occurs in the “entrance length” of the oscillating flows, and the viscous dissipation of the higher-order velocity harmoncis determines the entrance region. The “entrance length” can be obtained from the dissipation length of the third-order harmonic. These results prove that the UVP method is highly applicable to carry out the flow measurement in the “entrance length” of oscillating pipe flow. Received: 20 March 2000 / Accepted: 10 August 2001     

Natural convection in unsteady MHD couette flow

 The combined effect of natural convection and uniform transverse magnetic field on the couette flow of an electrically conducting fluid between two parallel plates for impulsive motion of one of the plates in discussed. Under the assumption of negligible induced magnetic field and applied magnetic field being fixed relative to the fluid or plate, the governing equations have been solved exactly, and the expressions for velocity and temperature field have been presented for two different cases. A comparative study is made between the velocity field for magnetic field fixed with respect to plate and magnetic field fixed with respect to fluid. Received on 12 July 1999     

Effect of the rotation,magnetic field and initial stress on peristaltic motion of micropolar fluid

In this work, the effect of magnetic field, rotation and initial stress on peristaltic motion of micropolar fluid in a circular cylindrical flexible tube with viscoelastic or elastic wall properties has been considered. Runge–Kutta technique are used. Runge–Kutta method is developed to solve the governing equations of motion resulting from a perturbation technique for small values of amplitude ratio. The time mean axial velocity profiles are presented for the case of free pumping and analyzed to observe the influence of wall properties, magnetic field, rotation and initial stress for various values of micropolar fluid parameters. In the case of viscoelastic wall, the effect of viscous damping on mean flow reversal at the boundary is seen. The numerical results of the time mean velocity profile are discussed in detail for homogeneous fluid under the effect of wall properties, magnetic field, initial stress and rotation for different cases by figures. The results indicate that the effect of wall properties, rotation, initial stress and magnetic field are very pronounced. Numerical results are given and illustrated graphically.     

State space approach to unsteady magnetohydrodynamics natural convection heat and mass transfer through a porous medium saturated with a viscoelastic fluid

A technique of the state space approach and the inversion of the Laplace transform method are applied to dimensionless equations of an unsteady one-dimensional boundary-layer flow due to heat and mass transfer through a porous medium saturated with a viscoelastic fluid bounded by an infinite vertical plate in the presence of a uniform magnetic field is described. Complete analytical solutions for the temperature, concentration, velocity, and induced magnetic and electric fields are presented. The inversion of the Laplace transforms is carried out by using a numerical approach. The proposed method is used to solve two problems: boundary-layer flow in a viscoelastic fluid near a vertical wall subjected to the initial conditions of a stepwise temperature and concentration and viscoelastic fluid flow between two vertical walls. The solutions are found to be dependent on the governing parameters including the Prandtl number, the Schmidt number, the Grashof number, reaction rate coefficient, viscoelastic parameter, and permeability of the porous medium. Effects of these major parameters on the transport behavior are investigated methodically, and typical results are illustrated to reveal the tendency of the solutions. Representative results are presented for the velocity, temperature, concentration, and induced magnetic and electric field distributions, as well as the local skin-friction coefficient and the local Nusselt and Sherwood numbers.     

Combined heat and mass transfer by mixed convection MHD flow along a porous plate with chemical reaction in presence of heat source

An exact and a numerical solutions to the problem of a steady mixed convective MHD flow of an incompressible viscous electrically conducting fluid past an infinite vertical porous plate with combined heat and mass transfer are presented.A uniform magnetic field is assumed to be applied transversely to the direction of the flow with the consideration of the induced magnetic field with viscous and magnetic dissipations of energy.The porous plate is subjected to a constant suction velocity as well as a uniform mixed stream velocity.The governing equations are solved by the perturbation technique and a numerical method.The analytical expressions for the velocity field,the temperature field,the induced magnetic field,the skin-friction,and the rate of heat transfer at the plate are obtained.The numerical results are demonstrated graphically for various values of the parameters involved in the problem.The effects of the Hartmann number,the chemical reaction parameter,the magnetic Prandtl number,and the other parameters involved in the velocity field,the temperature field,the concentration field,and the induced magnetic field from the plate to the fluid are discussed.An increase in the heat source/sink or the Eckert number is found to strongly enhance the fluid velocity values.The induced magnetic field along the x-direction increases with the increase in the Hartmann number,the magnetic Prandtl number,the heat source/sink,and the viscous dissipation.It is found that the flow velocity,the fluid temperature,and the induced magnetic field decrease with the increase in the destructive chemical reaction.Applications of the study arise in the thermal plasma reactor modelling,the electromagnetic induction,the magnetohydrodynamic transport phenomena in chromatographic systems,and the magnetic field control of materials processing.     

Magnetic particle microrheometric dynamics in Newtonian fluids: numerical simulations on the early motion and beyond

Rotating magnetic particle microrheometry has been a promising technique in measuring material properties in limited-sample high-viscosity fluids. Experimental limitations in the early motion require further theoretical exploration. In this work, the rotation of a ferromagnetic particle is considered under the influence of an external uniform magnetic field in an infinite highly viscous Newtonian fluid. The motion is restricted at the very low Reynolds number limit. Early-time analytical approximations are utilised to initiate numerical calculations in an attempt to describe the azimuthal velocity dependency on scaled time and radius. The equation of motion is solved by implementing a Crank–Nicholson finite-difference scheme, while the driving time-dependent boundary condition is discretised according to a Lax–Wendroff scheme. Stability and convergence criteria for the PDE are also discussed. It is demonstrated that the step function form of the applied magnetic field does not cause finite displacement other than that expected from Newtonian fluid flow for the typical magnetic field magnitude ranges encountered in micro-rheometric studies. The numerical solution is compared against analytical values available for particle ‘zero-total-torque’ condition and it was found to be second-order accurate in time and radial dimension.     

Melting effect and Cattaneo-Christov heat flux in fourth-grade material flow through a Darcy-Forchheimer porous medium

The melting phenomenon in two-dimensional (2D) flow of fourth-grade material over a stretching surface is explored. The flow is created via a stretching surface. A Darcy-Forchheimer (D-F) porous medium is considered in the flow field. The heat transport is examined with the existence of the Cattaneo-Christov (C-C) heat flux. The fourth-grade material is electrically conducting subject to an applied magnetic field. The governing partial differential equations (PDEs) are reduced into ordinary differential equations (ODEs) by appropriate transformations. The solutions are constructed analytically through the optimal homotopy analysis method (OHAM). The fluid velocity, temperature, and skin friction are examined under the effects of various involved parameters. The fluid velocity increases with higher material parameters and velocity ratio parameter while decreases with higher magnetic parameter, porosity parameter, and Forchheimer number. The fluid temperature is reduced with higher melting parameter while boosts against higher Prandtl number, magnetic parameter, and thermal relaxation parameter. Furthermore, the skin friction coefficient decreases against higher melting and velocity ratio parameters while increases against higher material parameters, thermal relaxation parameter, and Forchheimer number.

     

A three-dimensional non-linear constitutive law for magnetorheological fluids, with applications

In this paper we first summarize the magnetic and mechanical balance equations for magnetorheological fluids undergoing steady motion in the presence of a magnetic field. A general three-dimensional non-linear constitutive law for such a fluid is given for the case in which the magnetic induction vector is used as the independent magnetic variable. The equations are needed for the analysis of boundary-value problems involving fluids with dispersed micron-sized ferrous particles subjected to a time-independent magnetic field. For illustration, the equations are applied, in the case of an incompressible fluid, to the solution of some basic problems. We consider unidirectional flow in a region confined by two infinite parallel plates with a magnetic field applied perpendicular to the plates. Next, we examine two problems involving a circular cylindrical geometry with the fluid occupying the region between two concentric cylinders: axial flow subjected to an axial magnetic field and circumferential flow with a circumferential field. After making some simplifying assumptions on the constitutive law and choosing material parameters, numerical solutions for the velocity profiles are illustrated.     

Unsteady MHD Flow on a Rotating Cone in a Rotating Fluid

Unsteady flow over an infinite permeable rotating cone in a rotating fluid in the presence of an applied magnetic field has been investigated. The unsteadiness is induced by the time-dependent angular velocity of the body, as well as that of the fluid. The partial differential equations governing the flow have been solved numerically by using an implicit finite-difference scheme in combination with the quasi-linearization technique. For large values of the magnetic parameter, analytical solutions have also been obtained for the steady-state case. It is observed that the magnetic field, surface velocity, and suction and injection strongly affect the local skin friction coefficients in the tangential and azimuthal directions. The local skin friction coefficients increase when the angular velocity of the fluid or body increases with time, but these decrease with decreasing angular velocity. The skin friction coefficients in the tangential and azimuthal directions vanish when the angular velocities of fluid and the body are equal but this does not imply separation. When the angular velocity of the fluid is greater than that of the body, the velocity profiles reach their asymptotic values at the edge of the boundary layer in an oscillatory manner, but the magnetic field or suction reduces or suppresses these oscillations.     

Unsteady hydromagnetic Couette flow of dusty fluid with temperature dependent viscosity and thermal conductivity

In the present paper the unsteady Couette flow and heat transfer of a dusty conducting fluid between two parallel plates with temperature dependent viscosity and thermal conductivity are studied. A constant pressure gradient and an external uniform magnetic field are applied. The governing coupled momentum and energy equations are solved numerically using finite differences. The effect of the variable viscosity and thermal conductivity of the fluid and the uniform magnetic field on the velocity and temperature fields for both the fluid and dust particles is discussed.     

An experimental study on a wake behind a torus using the UVP monitor

 The flow around a torus has a complicated three-dimensional structure. Measuring the spatiotemporal field of velocity by means of conventional methods such as hot-wire anemometers and other one-point measuring instruments is thus difficult. Research is made on the spatiotemporal structure of the wake behind the torus by using a flow-visualizing technique and an ultrasonic velocity profile (UVP) monitor, in which two kinds of tori with different diameter ratios or solidity are set in a uniform flow with zero inclination and oblique postures. For the torus with zero inclination, there are two modes of flow structure according to the diameter ratio; at lower ratio, a disk mode is dominant, and at higher ratio, a ring wake mode appears. For the torus set with an oblique posture, the structure of the wake changes with respect to the oblique angle in a complicated fashion. The power spectra of the fluctuating velocities reveal an aspect of the character of this structural change. The Strouhal numbers estimated from the power spectra suggest that the flow patterns can be classified into four categories with respect to the oblique angle. Received: 15 May 1997/Accepted: 10 September 1998     

Magnetohydrodynamic approach of non-Newtonian blood flow with magnetic particles in stenosed artery

The non-Newtonian blood flow, together with magnetic particles in a stenosed artery, is studied using a magneto-hydrodynamic approach. The wall slip condition is also considered. Approximate solutions are obtained in series forms under the assumption that the Womersley frequency parameter has small values. Using an integral transform method, analytical solutions for any values of the Womersley parameter are obtained.Numerical simulations are performed using MATHCAD to study the influence of stenosis and magnetic field on the flow parameters. When entering the stenosed area, blood velocity increases slightly, but increases considerably and reaches its maximum value in the stenosis throat. It is concluded that the magnitude of axial velocity varies considerably when the applied magnetic field is strong. The magnitude of maximum fluid velocity is high in the case of weak magnetic fields. This is due to the Lorentz's force that opposes motion of an electrically conducting fluid. The effect of externally transverse magnetic field is to decelerate the flow of blood. The shear stress consistently decreases in the presence of a magnetic field with increasing intensity.     

Bichromatic particle streak velocimetry bPSV

We propose a novel technique for three-dimensional three-component (3D3C) interfacial flow measurement. It is based on the particle streak velocimetry principle. A relatively long integration time of the camera is used for capturing the movement of tracer particles as streaks on the sensor. The velocity along these streaks is extracted by periodically changing the illumination using a known pattern. A dye with different absorption characteristics in two distinct wavelengths is used to color the fluid. The depth of particles relative to the fluid interface can then be computed from their intensities when illuminated with light sources at those two different wavelengths. Hence, from our approach, a bichromatic, periodical illumination together with an image processing routine for precisely extracting particle streak features is used for measuring 3D3C fluid flow with a single camera. The technique is applied to measuring turbulent Rayleigh–Bénard convection at the free air--water interface. Using Lagrangian statistics, we are able to demonstrate a clear transition from the Batchelor regime to the Richardson regime, both of which were postulated for isotropic turbulence. The relative error of the velocity extraction of our new technique was found to be below 0.5?%.