Synthesis, characterization, and ethylene polymerization behavior of [(RR′-admpzp)2Ti(OPr)2] complexes (RR′-admpzp = 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-olate)

[(RR′-admpzp)₂Ti(OPrⁱ)₂] complexes (2a-c), synthesized from reaction of Ti(OPrⁱ)₃Cl (0.5 equiv) with 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-ol compounds in the presence of triethylamine (0.5 equiv), are pseudo-octahedral with each RR′-admpzp ligand κ²-O,N(pyrazolyl) coordinated to the titanium center. In solution, 2a-c adopt isomeric structures that are in dynamic equilibrium. At 23 °C, 2a-c/1000 MAO catalyst systems furnished high molecular weight polymers with narrow molecular weight distributions (M_w/M_n = 2.7-2.8). At 100 °C, 2a-c/MAO catalyst systems exhibited increased polymerization activity and 2c/1000 MAO system furnished high molecular weight polyethylene with a molecular weight distribution (M_w/M_n = 2.1) that is close to that found for single-site catalysts.     

Synthesis of hyperbranched-linear star block copolymers by atom transfer radical polymerization of styrene using hyperbranched poly(siloxysilane) (HBPS) macroinitiator

Hyperbranched-linear star block copolymers, hyperbranched poly(siloxysilane)-block-polystyrene (HBPS-b-PSt), were prepared by atom transfer radical polymerization (ATRP) of styrene in xylene, using bromoester-terminated HBPS (HBPS-Br (P3), M_n = 7500, M_w/M_n = 1.76) as a macroinitiator. The number-average molecular weights of the obtained polymers (M_n) were in the range of 21,800-60,000 and molecular weight distributions were unimodal throughout the reaction (M_w/M_n = 1.28-1.40). These polymers showed 5 wt.% decomposition temperature (T_d5) over 300 °C. The DSC thermograms of the resulting polymers indicated two glass transition temperatures (T_g). The T_g of HBPS segment shifted to higher value while the T_g of PSt segment shifted to lower value compared with those of the homopolymers. Preliminary physical characterization related to the solution viscosity of the resulting block copolymers is also reported.     

Note on the glass transition temperature of Poly(vinylphenol)

Critical overview of literature data on the glass transition temperature T_g of poly(4-vinylphenol) PVPh revealed a large scatter of values ranging between 53 and 194 °C, which can only partially be attributed to molecular-mass effect. The reason could be seen in residual moisture and/or solvent in samples subjected to insufficient or even no drying. Based on selected two thirds of literature data, a regression equation is proposed for the dependence of T_g on 1/M_n. Two samples of commercial PVPh (M_n 11,500; M_w 22,100) and (M_n 19,700; M_w 40,900) were studied by DSC, ATR-FTIR, and SEC methods. A procedure of preparing well defined samples is proposed: PVPh vacuum-dried at 140 °C for 24 h is dissolved in tetrahydrofuran and precipitated in hexane. The precipitate is vacuum-dried at 40 °C for 24 h, weighed into a pierced DSC pan. After final vacuum drying at 140 °C for 24 h, the sample is analyzed. The PVPh samples treated in this way showed T_g of 175.0 °C and 179.6 °C, respectively.     

Direct construction of silicon-silicon bond by using the low-valent titanium reagent

The reductive dimerization or polymerization of organochlorosilanes has been achieved by using the low-valent titanium reducing agent other than the alkali metals that are invariable used in the Wurtz-type coupling reaction. Applying this method, the corresponding disilanes or poly(methylvinylsilane) was obtained in good yields. The poly(methylvinylsilane) synthesized by this method is highly pure with a high molecular weight and a narrow molecular weight distribution (M_w/M_n = 1.6, M_n = 16,860).     

Reverse atom transfer radical polymerisation (RATRP) of methacrylates using copper(I)/pyridinimine catalysts in conjunction with AIBN

N-n-Propyl-2-pyridylmethanimine, 1, N-n-octyl-2-pyridylmethanimine, 2, N-n-lauryl-2-pyridylmethanimine, 3, and N-n-octadecyl-2-pyridylmethanimine, 4 have been used in conjunction with copper(II) bromide and azo initiators for the reverse atom transfer radical polymerisation of a range of methacrylates. AIBN to Cu^IIBr₂ ratios of 0.5:1, 0.75:1 and 1:1 give PMMA with M_n 11 500 g mol⁻¹ (PDi = 1.24) (at 22% conversion), 12 500 g mol⁻¹ (PDi = 1.06) (at 83% conversion) and 10 900 g mol⁻¹ (PDi = 1.11) (at 84% conversion), respectively. A Cu^IIBr₂ complex is demonstrated to be needed at the start of the reaction for good control over molecular weight and polydispersity as reactions using Cu(I)Br as catalyst yielded PMMA of M_n 31 000 g mol⁻¹ (PDi = 2.90), reactions with no copper yield PMMA of M_n 33 000 g mol⁻¹ (PDi = 2.95). The RATRP of styrene was carried out using Cu^IIBr₂ as catalyst. AIBN to Cu^IIBr₂ ratio of 0.5:1, 0.75:1 and 1:1 gave PS with M_n = 12 400 g mol⁻¹ (PDi = 1.27) at low conversion, M_n = 15 500 g mol⁻¹ (PDi = 1.11) and 12 400 g mol⁻¹ (PDi = 1.38), respectively at ∼85% conversion. A series of block copolymers of MMA with BMA, BzMA and DMEAMA (15 600 g mol⁻¹ (PDi = 1.18), 13 300 g mol⁻¹ (PDi = 1.14) 15 300 g mol⁻¹ (PDi) = 1.16), using a PMMA macroinitiator were prepared. Emulsion polymerisation of MMA using [initiator]:[Cu^(II)Br₂] ratio = 0.5:1 with Brij surfactant gave a linear increase of M_n with respect to conversion, final M_n = 112 800 g mol⁻¹ (PDi = 1.42). Further reactions were carried out with [initiator]:[Cu^(II)Br₂] ratio = 0.75:1 and 1:1. Both giving PMMA with M_n ∼ 32 000 g mol⁻¹ (PDi ∼ 2.4). These reactions exhibit no control, this is because the azo initiator is present in excess and all of the monomer is consumed by a free radical polymerisation as opposed to a controlled reaction. Particle size analysis (DLS) showed the particle size between 160 and170 nm in all cases.     

Vinyl polymerization of norbornene catalyzed by a series of bis(β-ketoiminato)nickel (II) complexes in the presence of methylaluminoxane

A series of nickel complexes with β-ketoiminato ligands based on pyrazolone derivative were synthesized and characterized, which are highly active catalyst precursors for norbornene polymerization under mild reaction conditions through a vinyl-type polymerization mechanism. The catalytic activity could be up to 3.38 × 10⁷ g polymer/mol Ni h. The molecular weight distributions of the polynorbornenes (M_w/M_n = 2.05-2.56) indicate the presence of a single active species in the polymerization process.     

Synthetic Cu0.507(5)Pb8.73(9)Sb8.15(8)I1.6S20.0(2) nanowires

Nanowires of an iodine containing Pb-Sb-sulfosalt have been synthesized by chemical vapor transport. Their structure was studied using high-resolution transmission electron microscopy and X-ray powder diffraction. The lattice parameters show values equal to a=4.9801(4) nm, b=0.41132(8) nm (with two-fold superstructure), c=2.1989(1) nm and β=99.918(6)°. These parameters and the results of a multislice simulation are in good agreement with the mineral pillaite, Cu_0.10Pb_9.16Sb_9.84S_22.94Cl_1.06O_0.5 (space group C2/m, a=4.949(1) nm, b=0.41259(8) nm, c=2.1828(4) nm, and β=99.62(3)°). Microprobe and EDX analyses yielded a chemical composition of Cu_0.507(5)Pb_8.73(9)Sb_8.15(8)I_1.6S_20.0(2) which is close to natural pillaite but contains no oxygen and iodine instead of chlorine. The structure of the investigated material is based on chains of M-S polyhedra (M=Pb or Sb) typical for the architecture of sulfosalts implying iodine atoms in trigonal prismatic coordination with Pb atoms from the M-S polyhedra of neighboring chains. The [010] superstructure of the specimen was found to be unstable under electron beam irradiation with a rapid decrease of the b lattice parameter from 0.8 to 0.4 nm within 5 min.     

Titanium-based mixed oxides from a series of titanium(IV) citrate complexes

The isostructural hexaaquatransition-metal/titanium citrate complexes (NH₄)₂[M(H₂O)₆][Ti(H₂cit)₃]₂·6H₂O [M(II)=Mn 1, Fe 2, Co 3, Ni 4, Cu 5, and Zn 6] (H₄cit=citric acid), which were synthesized by reacting titanium(IV) citrate with divalent metal salts in the 1.0-3.5 pH range, adopt hydrogen-bonded chain motifs. The crystal structures feature three bidentate citrate anions that chelate to the titanium atom through their negatively charged α-alkoxy and α-carboxy oxygen atoms; the chelation is consistent with the large downfield shifts of ¹³C NMR for carbon atoms for complex 6. The thermal decomposition of the complexes furnishes mixed metal oxides. The main-group magnesium analog when heated at 600 °C yielded MgTi₂O₅ that is of the pseudobrookite type; the particle size is approximately 30 nm.     

Swelling behaviour of thermo-sensitive hydrogels based on oligo(ethylene glycol) methacrylates

The thermo-sensitive swelling behaviour of hydrogels based on 2-(2-methoxyethoxy)ethyl methacrylate (MEO₂MA) and synthesized by free radical polymerization has been investigated. The homopolymer hydrogel presents a low critical solution temperature (LCST) close to room temperature, which can be modulated by copolymerization with longer oligo(ethylene glycol) side chain methacrylates (OEG_xMA). Then, three series of copolymeric hydrogels synthesized with MEO₂MA and several low ratios of OEG_xMA with M_n = 475 g mol⁻¹ (OEG₈MA), M_n = 1100 g mol⁻¹ (OEG₂₃MA) and M_n = 2080 g mol⁻¹ (OEG₄₅MA) were studied. In addition to conventional tetra(ethylene glycol) dimethacrylate (TEGDMA) crosslinker, the use of biodegradable oligo(caprolactone) dimethacrylate (OCLDMA) was also tested. The hydrophilic/hydrophobic balance, function of the short and the long OEG side chains, establishes a swelling behaviour depending on monomer composition, side chain length and temperature. The swelling at equilibrium increases with increasing the amount of OEG_xMA in the copolymer and, at the same time, the collapsing moves progressively to higher temperature. The temperature dependent volumetric response of some of these hydrogels can be compare with the most extended thermo-sensitive hydrogel, which is based on poly(N-isopropylacrylamide) (P(N-iPAAm)). Therefore, they are potential candidates to replace it in applications where biocompatibility is required.     

Influence of the chain and layer structure of Fe(III) and In(III) aqua-pentachloro-complexes on the bending vibrations of water molecules

Studies of IR and Raman spectra of monohydrates M^I₂[M^IIICl₅(H₂O)] (where M^I=K⁺, Rb⁺, Cs⁺ and M^III=Fe³⁺, In³⁺) at 1400-1900 cm⁻¹ have been carried out. The medium intensity band, detected in the region 1580-1595 cm⁻¹ was assigned to bending vibrations of water molecules (δHOH). The shift of the δHOH band towards low wavenumbers (1580-1595 cm⁻¹) is a main sign of the water molecule interactions in the chain hydrates. Additionally in the IR and Raman spectra of these salts, the appearance of the low intensity band between 1750 and 1810 cm⁻¹ (ν_x(H₂O)) was observed. In the presented paper we also discuss the influence of M^I and M^III cations on the position and splitting of these bands.     

Ni(II) selective sensors based on Schiff bases membranes in poly(vinyl chloride)

The two nickel chelates of Schiff bases, 3-hydroxy-N-{2-[(3-hydroxy-N-phenylbutyrimidoyl)-amino]-phenyl}-N′-phenylbutyramidine (M₁) and bis-4-(ethyliminomethyl)naphthalene-1-ol (M₂), have been synthesized and explored as ionophores for preparing PVC-based membrane sensors selective to nickel ion. The influences of membrane compositions on the potentiometric response of the electrodes have been found to substantially improve the performance characteristics. The best performance was obtained with the electrode having a membrane composition (w/w; mg) of (M₁): PVC:NaTPB:CN in the ratio 5:150:5:150. The sensor shows a linear potential response for Ni²⁺ over a wide concentration range 1.6 × 10⁻⁷ to 1.0 × 10⁻² M with Nernstian compliance (30.0 ± 0.2 mV/decade of activity) within pH range 2.5-9.5 and a fast response time of 10 s. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol, and acetonitrile and could be used for a period of 4 months. The analytical usefulness of the proposed electrode has been evaluated by its application in the determination of nickel in real samples. The practical utility of the membrane electrode has also been observed in the presence of surfactants.     

Synthesis and characterization of phosphorous-bridged bisphenoxy titanium complexes and their application to ethylene polymerization

Phosphorous-bridged bisphenoxy titanium complexes were synthesized and their ethylene polymerization behavior was investigated. Bis[3-tert-butyl-5-methyl-2-phenoxy](phenyl)phosphine tetrahydrofuran titanium dichloride (4a) was obtained by treatment of 3 equiv of n-BuLi with bis[3-tert-butyl-2-hydroxy-5-methylphenyl](phenyl)phosphine hydrochloride salt (3a) followed by TiCl₄(THF)₂ in THF. THF-free complexes 5a-5d were synthesized more conveniently by the direct reaction of MOM-protected ligands (2a-2d) with TiCl₄ in toluene. X-ray analysis of 4a revealed that the ligand is bonded to the octahedral titanium (IV) center in a facial fashion and two chlorine atoms possess cis-geometry. Complexes 4a and 5a-5d were utilized as catalyst precursors for ethylene polymerization. Complex 5c gave high molecular weight polyethylene (M_w = 1,170,000, M_w/M_n = 2.0) upon activation with Al(ⁱBu)₃/[Ph₃C][B(C₆F₅)₄] (TB). Ethylene polymerization activity of 5d activated with Al(ⁱBu)₃/TB reached 49.0 × 10⁶ g mol (cat) ⁻¹ h⁻¹.     

Quantitative study of stereospecific binding of monoclonal antibody to anti-benzo(a)pyrene diol epoxide-N-dG adducts by capillary electrophoresis immunoassay

The stereospecific binding of monoclonal antibody (mAb) 8E11 to anti-benzo(a)pyrene diol epoxide (BPDE)-dG adducts in single nucleoside, long oligonucleotide, and genomic DNA were quantitatively evaluated using noncompetitive and competitive capillary electrophoresis (CE) immunoassays. Two single-stranded TMR-BPDE-90mers containing a single anti-BPDE-dG adduct with defined stereochemistry and a fluorescent label at 5′-end were used as fluorescent probes for competitive CE immunoassay. To quantitatively evaluate the binding affinity through competitive CE immunoassays, a series of equations were derived according to the binding stoichiometry. The binding of mAb 8E11 to trans-(+)-anti-BPDE-dG displays strongest affinity (K_b: 3.57 × 10⁸ M⁻¹) among all four investigated anti-BPDE-dG mononucleoside adducts, and the cis-(−)-anti-BPDE-dG displays lowest affinity (K_b: 1.14 ×10⁷ M⁻¹). The binding of monoclonal antibody (mAb) 8E11 to BPDE-dG adducts in long DNA (90mer) preferentially forms the complex with a stoichiometry of 1:1, and that mAb 8E11 displays a slightly higher affinity with trans-(+)-anti-BPDE-90mers (K_b: 6.36 ± 0.54 × 10⁸ M⁻¹) than trans-(−)-anti-BPDE-90mers (K_b: 4.52 ± 0.52 × 10⁸ M⁻¹). The mAb 8E11 also displays high affinity with BPDE-dG adducts in genomic DNA (K_b: 3.74 × 10⁸ M⁻¹), indicating its promising applications for sensitive immuno-detection of BPDE-DNA adducts in genomic DNA.     

Synthesis of a novel bistriazene reagent 4,4′-bis[3-(4-phenylthiazol-2-yl)triazenyl]biphenyl and its highly sensitive color reaction with mercury(II)

We report the synthesis of a novel bistriazene, 4,4′-bis(3-(4-phenylthiazol-2-yl)triazenyl)biphenyl (BPTTBP), and its highly sensitive color reaction with Hg²⁺. The new reagent was synthesized in good yield by coupling 2-amino-4-phenylthiazole with 4,4′-biphenyldiamine bisdiazonium salt. Using a blend of surfactants N-cetylpyridinium chloride (CPC) and polyethylene glycol n-octanoic phenyl ether (OP) as a micelle sensitizer, the red colored reagent assembles with Hg²⁺ in pH 9.8 borate buffer according to a 1:1 stoichiometry, forming a blue oligomeric/polymeric chelating complex with a high apparent stability constant (1.1 × 10⁸ M⁻¹). Whereas the maximum absorption of reagent occurs at 510 nm with an extinct coefficient of 1.35 × 10⁴ M⁻¹ cm⁻¹, the complex absorbs at 611 nm, with an apparent extinct coefficient of 1.04 × 10⁵ M⁻¹ cm⁻¹. Beer's law is obeyed in the range of 0-15 μg/25 mL Hg²⁺, and Sandell's sensitivity is 1.92 × 10⁻³ μg/cm². In the presence of thiourea and Na₄P₂O₇ as masking agents, the method was found free from interferences of foreign ions commonly occurring with mercury. The optimized protocol has been successfully applied to spectrophotometric determination of mercury in waste water samples. The features of the new reagent associated with its special structure were discussed, and an unprecedented “domino effect” was proposed to account for its unique chelating stoichiometry with Hg²⁺.     

Full factorial design applied to intercalation of amines in lamellar titanium phenylphosphonate and titanium phenylarsonate

The intercalation of amines into titanium phenylphosphonate M(O₃PC₆H₅)₂ and titanium phenylarsonate M(O₃AsC₆H₅)₂ was investigated through batch and back-titration processes. Amine insertion in both layered lamellar inorganic matrices, measured by the number of moles of intercalated agent, was optimized using a complete factorial design based on two levels and four factors. The effects of solvent, ethanol and acetonitrile, neutral organic base, ethyl and propylamines, H₃C(CH₂)_nNH₂ (n=1, 2), and material mass, 30 and 40 mg, on amine insertion in both lamellar inorganic matrices was optimized using a full factorial design. Important positive effect values, 0.40×10⁻³ and 0.69×10⁻³ mol g⁻¹ were observed for inorganic material and solvent whereas a negative effect, −0.33×10⁻³ mol g⁻¹ was observed for material mass. Two significant but less important binary interactions were also observed. The use of either ethyl or propylamine does not appear to affect the quantity of amine insertion. Recommended experimental conditions for maximum amine insertion obtained from this factorial design are 30 mg of titanium phenylarsonate in acetonitrile solvent using either of the studied amines.     

Titanium complexes with modifiable pyrazolonato and pyrazolonato-ketimine ligands: Synthesis, characterization and ethylene polymerization behavior

Six titanium complexes bearing pyrazolonato and pyrazolonato-ketimine ligands have been synthesized and characterized. It was found that the ligand structure of the synthesized complexes has a significant effect on the catalytic performance of the complexes. The synthesized complexes were activated with MAO and their activities varied from negligible to high (up to 612 kg_PE/(mol_Ti h bar). The pyrazolonato-ketimine complex with a phenyl substituent in the imine part was the most active in the series and it was the only one producing polyethylenes with relatively narrow molecular weight distribution (M_w/M_n from 1.6 to 2.2).     

Controlled synthesis and fluorescent properties of poly(9-(4-vinylbenzyl)-9H-carbazole) via nitroxide-mediated living free-radical polymerization

The functional polymer containing carbazole unit, [(poly(9-(4-vinylbenzyl)-9H-carbazole) (PVBK)], was successfully prepared via nitroxide-mediated living free-radical polymerization of 9-(4-vinylbenzyl)-9H-carbazole (VBK). The controlled features of the polymerization were confirmed by the linear increase in the molecular weight with the monomer conversion while keeping the relative narrow molecular weight distribution (M_w/M_n ? 1.51), and successful chain extension with styrene. The resulting polymer absorbed light in the 305-355 nm range and exhibited fluorescent emission at 350 nm. The fluorescent intensity of the polymer was lower than that of monomer and was affected by the properties of the different solvents, which decreased in the following order: DMF > THF > CHCl₃ at the same concentration of carbazole units. The fluorescence intensity of the polymer was apparently influenced by chromophore concentration, and the maximum value was obtained when the carbazole unit concentration was around 8 × 10⁻⁵ mol/L. Moreover, it was shown that the strong fluorescence of PVBK can be quenched by methyl acrylate (MA).     

Alkaline earth metal poly(hydrogen fluorides) hexafluoroarsenates(V) and hexafluorophosphate(V): M2(H2F3)(HF2)2(AF6) (M = Ca, A = As; M = Sr, A = As, P)

New compounds of the type M₂(H₂F₃)(HF₂)₂(AF₆) with M = Ca, A = As and M = Sr, A = As, P) were isolated. Ca₂(H₂F₃)(HF₂)₂(AsF₆) was prepared from Ca(AsF₆)₂ with repeated additions of neutral anhydrous hydrogen fluoride (aHF). It crystallizes in a space group P4₃22 with a = 714.67(10) pm, c = 1754.8(3) pm, V = 0.8963(2) nm³ and Z = 4. Sr₂(H₂F₃)(HF₂)₂(AsF₆) was prepared at room temperature by dissolving SrF₂ in aHF acidified with AsF₅ in mole ratio SrF₂:AsF₅ = 2:1. It crystallizes in a space group P4₃22 with a = 746.00(12) pm, c = 1805.1(5) pm, V = 1.0046(4) nm³ and Z = 4. Sr₂(H₂F₃)(HF₂)₂(PF₆) was prepared from Sr(XeF₂)_n(PF₆)₂ in neutral aHF. It crystallizes in a space group P4₁22 with a = 737.0(3) pm, c = 1793.7(14) pm, V = 0.9744(9) nm³ and Z = 4. The compounds M₂(H₂F₃)(HF₂)₂(AF₆) gradually lose HF at room temperature in a dynamic vacuum or during being powdered for recording IR spectra or X-ray powder ray diffraction patterns. All compounds are isotypical with coordination of nine fluorine atoms around a metal center forming a distorted Archimedian antiprism with one face capped. This is the first example of the compounds in which H₂F₃⁻ and HF₂⁻ anions simultaneously bridge metal centers forming close packed three-dimensional network of polymeric compounds with low solubility in aHF. The HF₂⁻ anions are asymmetric with usual F?F distances of 227.3-228.5 pm. Vibrational frequency (ν₁) of HF₂⁻ is close to that in NaHF₂. The anion H₂F₃⁻ exhibits unusually small F?F?F angle of 95.1°-97.6° most probably as a consequence of close packed structure.     

Crystal chemistry of M[PO2(OH)2]2·2H2O compounds (M=Mg, Mn, Fe, Co, Ni, Zn, Cd): Structural investigation of the Ni, Zn and Cd salts

The compounds M[PO₂(OH)₂]₂·2H₂O (M=Mg, Mn, Fe, Co, Ni, Zn, Cd) were prepared from super-saturated aqueous solutions at room temperature. Single-crystal X-ray structure investigations of members with M=Ni, Zn, Cd were performed at 295 and 120 K. The space-group symmetry is P2₁/n, Z=2. The unit-cell parameters are at 295/120 K for M=Ni: a=7.240(2)/7.202(2), b=9.794(2)/9.799(2), c=5.313(1)/5.285(1) Å, β=94.81(1)/94.38(1)°, V=375.4/371.9 Å³; M=Zn: a=7.263(2)/7.221(2), b=9.893(2)/9.899(3), c=5.328(1)/5.296(2) Å, β=94.79(1)/94.31(2)°, V=381.5/377.5 Å³; M=Cd: a=7.356(2)/7.319(2), b=10.416(2)/10.423(3), c=5.407(1)/5.371(2) Å, β=93.85(1)/93.30(2)°, V=413.4/409.1 Å³. Layers of corner-shared MO₆ octahedra and phosphate tetrahedra are linked by three of the four crystallographically different hydrogen bonds. The fourth hydrogen bond (located within the layer) is worth mentioning because of the short O_h?O bond distance of 2.57-2.61 Å at room temperature (2.56-2.57 Å at 120 K); only for M=Mg it is increased to 2.65 Å. Any marked temperature-dependent variation of the unit-cell dimension is observed only vertical to the layers. The analysis of the infrared (IR) spectroscopy data evidences that the internal PO₄ vibrations are insensitive to the size and the electronic configuration of the M²⁺ ions. The slight strengthening of the intra-molecular P-O bonds in the Mg salt is caused by the more ionic character of the Mg-O bonds. All IR spectra exhibit the characteristic “ABC trio” for acidic salts: 2900-3180 cm⁻¹ (A band), 2000-2450 cm⁻¹ (B band) and 1550-1750 cm⁻¹ (C band). Both the frequency and the intensity of the A band provide an evidence that the PO₂(OH)₂ groups in M[PO₂(OH)₂]₂·2H₂O compounds form weaker hydrogen bonds as compared with other acidic salts with comparable O?O bond distances of about 2.60 Å. The observed shift of the O-H stretching vibrations of the water molecule in the order M=Mg>Mn≈Fe≈Co>Ni>Zn≈Cd has been discussed with respect to the influence of both the character and the strength of M↔H₂O interactions.     

Magnetostructural correlations in the antiferromagnetic Co2−x Cux(OH)AsO4 (x=0 and 0.3) phases

The Co_2−xCu_x(OH)AsO₄ (x=0 and 0.3) compounds have been synthesized under mild hydrothermal conditions and characterized by X-ray single-crystal diffraction and spectroscopic data. The hydroxi-arsenate phases crystallize in the Pnnm orthorhombic space group with Z=4 and the unit-cell parameters are a=8.277(2) Å, b=8.559(2) Å, c=6.039(1) Å and a=8.316(1) Å, b=8.523(2) Å, c=6.047(1) Å for x=0 and 0.3, respectively. The crystal structure consists of a three-dimensional framework in which M(1)O₅-trigonal bipyramid dimers and M(2)O₆-octahedral chains (M=Co and Cu) are present. Co₂(OH)AsO₄ shows an anomalous three-dimensional antiferromagnetic ordering influenced by the magnetic field below 21 K within the presence of a ferromagnetic component below the ordering temperature. When Co²⁺ is partially substituted by Cu²⁺ions, Co_1.7Cu_0.3(OH)AsO₄, the ferromagnetic component observed in Co₂(OH)AsO₄ disappears and the antiferromagnetic order is maintained in the entire temperature range. Heat capacity measurements show an unusual magnetic field dependence of the antiferromagnetic transitions. This λ-type anomaly associated to the three-dimensional antiferromagnetic ordering grows with the magnetic field and becomes better defined as observed in the non-substituted phase. These results are attributed to the presence of the unpaired electron in the dx²−y² orbital and the absence of overlap between neighbour ions.