A structural study of the perovskite series Ca1−xNaxTi1−xTaxO3

Compounds in the solid solution series Ca_1−xNa_xTi_1−xTa_xO₃ were synthesized at 1300 °C, followed by annealing at 850 °C or 800 °C with quenching and/or slow cooling to room temperature. Rietveld refinement of their powder X-ray diffraction patterns show that all compounds are single-phase ternary perovskites which adopt the space group Pbnm (a≈b≈√2a_p; c≈2a_p; Z=4) at ambient conditions. The unit cell parameters and cell volumes of the compounds increase regularly with increasing values of x. The coordination of the A-site cations changes throughout the series from eight for CaTiO₃ to nine for NaTaO₃. Compounds with 0?x ?0.4 have A-site cations in eight fold coordination, whereas the coordination of those with 0.4<x<0.9 is ambiguous. Analysis of the crystal chemistry of the compounds shows that the change in coordination at x=0.4 is related to the departure of the B-site cations from the second coordination sphere of the A-site cations, as in compounds with x>0.4 the A-^IIO distances become less than the A-B intercation distances. Contemporaneous with these coordination changes, the tilt angles of the BO₆ polyhedra decrease with increasing values of x. This solid solution series is unusual in that these structural and coordination changes occur regardless that Goldschmidt tolerance factors remain essentially constant at approximately 0.89, and observed tolerance factors, assuming eight fold coordination of the A-site cations, range only from 0.91 to 0.93 (0?x?0.8).     

High Lithium Capacity MxV2O5Ay·nH2O for Rechargeable Batteries

The aqueous synthesis and electrochemical properties of nanocrystalline M_xV₂O₅A_y·nH₂O are described. It is easily and quickly prepared by precipitation from acidified vanadate solutions. M_xV₂O₅A_y·nH₂O has been characterized by X-ray powder diffraction, electron microscopy, TGA, chemical analyses, and electrochemical studies. The atomic structure is related to that of xerogel-derived V₂O₅·nH₂O. In M_xV₂O₅A_y·nH₂O, M is a cation from the starting vanadate salt and A is an anion from the mineral acid. This material exhibits high, reversible Li capacity and may be considered for use in a cathode in primary and secondary batteries. The lithium capacity of an electrode composed of M_xV₂O₅A_y·nH₂O/EPDM/carbon (88/4/8) is ∼380(mA h)/g (C/80 rate) and the energy density is ∼1000(W h)/kg (120-μm-thick cathode, 4-1.5 V, versus Li metal anode). Critical parameters identified in the synthesis of M_xV₂O₅A_y·nH₂O, with respect to achieving high Li-ion insertion capacity, are acid/vanadium ratio, starting vanadate salt, and temperature. Inclusion of carbon black in the synthesis yields a composite that maintains the high Li capacity, lowers the electrochemical-cell polarization, and preserves the lithium capacity at higher discharge rates. Li-ion coin cells, using pre-lithiated graphite anodes, exhibit electrochemical performance comparable to that of Li-metal coin cells.     

Electronic and magnetic properties of LaNi1−xCoxO3, LaCo1−xFexO3 and LaNi1−xFexO3

LaNi_1?xCo_xO₃ shows itinerant d-electron behavior similar to LaNiO₃ up to x = 0.5. In the range 0.5 < x < 1.0, the cobalt spin state equilibrium is markedly affected; the localized-itinerant electron transition of LaCoO₃ is not seen when x < 0.95. In LaCo_1?xFe_xO₃, itinerancy of d-electrons decreases with increase in x and the compositions with x > 0.5 are similar to LaFeO₃. If x > 0.1, the localized-itinerant electron transition is not seen and the cobalt spin state equilibrium is considerably altered. In LaNi_1?xFe_xO₃, itinerancy decreases with increase in x. These observations can be satisfactorily explained in terms of Goodenough's energy band schemes.     

The Ba1−ySryMnO3−x system

Subsolidus phase relations at ambient atmospheric pressure and elevated temperatures in the Ba_1?ySr_yMnO_3?x system were investigated by quenching, gravimetric, and X-ray diffraction methods. The system is not binary above ～1035°C because of reactions with atmospheric oxygen. The air isolar, P_O2 = 0.2 atm, was characterized at 1225, 1375, 1490, and 1610°C. Seven oxygen-deficient phases including a perovskite phase characterize the system. Their stability depends on the values of y and x in Ba_1?ySr_yMnO_3?x. The cell dimensions of these phases expand as x increases at fixed y. These seven modifications can be retained in stoichiometric form by oxidation at lower temperatures.     

Visible light-sensitive yellow TiO2−xNx and Fe-N co-doped Ti1−yFeyO2−xNx anatase photocatalysts

Nitrogen substituted yellow colored anatase TiO_2−xN_x and Fe-N co-doped Ti_1−yFe_yO_2−xN_x have been easily synthesized by novel hydrazine method. White anatase TiO_2−δ and N/Fe-N-doped samples are semiconducting and the presence of ESR signals at g ∼1.994-2.0025 supports the oxygen vacancy and g∼4.3 indicates Fe³⁺ in the lattice. TiO_2−xN_x has higher conductivity than TiO_2−x and Fe/Fe-N-doped anatase and the UV absorption edge of white TiO_2−x extends in the visible region in N, Fe and Fe-N co-doped TiO₂, which show, respectively, two band gaps at ∼3.25/2.63, ∼3.31/2.44 and 2.8/2.44 eV. An activation energy of ∼1.8 eV is observed in Arrhenius log resistivity vs. 1/T plots for all samples. All TiO₂ and Fe-doped TiO₂ show low 2-propanol photodegradation activity but have significant NO photodestruction capability, both in UV and visible regions, while standard Degussa P-25 is incapable in destroying NO in the visible region The mid-gap levels that these N and Fe-N-doped TiO₂ consist may cause this discrepancy in their photocatalytic activities.     

Water-containing derivative phases of the Srn+1FenO3n+1 series

The n=1, 2, 3 and ∞ members of the homologous series Sr_n+1Fe_nO_3n+1 of layered iron oxides are investigated for their tendency to accept additional layers of water in their crystals. The phases possess a Ruddlesden-Popper-type SrO-(SrO-FeO₂)_n crystal structure, where the n=∞ limit is nothing but the perovskite structure. It is revealed that the n=1, 2 and 3 phases readily accommodate one or two layers of water between adjacent SrO layers, whereas the n=∞ member which lacks the SrO-SrO double-layer unit remains intact in the presence of water. The speed of the water intercalation process is found to decrease with increasing n. Among the layered water derivatives, the n=2 phase with two water molecules per formula unit, i.e. Sr₃Fe₂O₇·2H₂O, was found to be most stable.     

Far-infrared and X-ray investigations of the mixed platinum dichalcogenides PtS2−xSex, PtSe2−xTex, and PtS2−xTex

Polycrystalline samples of the CdI₂-type mixed crystals PtS_2?xSe_x, PtSe_2?xTe_x, and PtS_2?xTe_x were prepared and characterized by far-infrared (4000-40 cm^?1) and X-ray techniques. A change in the behavior of the c/a-ratio and in the x dependence of the plasma resonance frequency of the free carriers present is observed in the system PtS_2?xSe_x near PtS_0.6Se_1.4, which is interpreted as a critical composition for (p,d)-band overlap in the platinum dichalcogenides. Optical phonon frequencies are given for the two-mode system PtS_2?xSe_x.     

Nouveaux echangeurs cationiques avec une structure a tunnels entrecroises: Les oxydes A12M33O90 et A12M33O90, 12H2O

New oxides with A₁₂M₃₃O₉₀ formula (A = Rb, Cs, Tl) have been synthesized. They crystallize in the trigonal system and can be described by pyrochlore and A₂M₇O₁₈ phases intergrowth. Cationic ionexchange properties of these compounds are brought out in aqueous solutions and in solid state. So, new hydrated oxides are prepared and their thermal decomposition has been studied. Relations between ionexchange properties and structure are discussed.     

Charge compensation and oxidation in NaxCoO2−δ and LixCoO2−δ studied by XANES

A comparative study on the oxidation and charge compensation in the A_xCoO_2−δ systems, A=Na (x=0.75, 0.47, 0.36, 0.12) and Li (x=1, 0.49, 0.05), using X-ray absorption spectroscopy at O 1s and Co 2p edges is reported. Both the O 1s and Co 2p XANES results show that upon removal of alkali metal from A_xCoO_2−δ the valence of cobalt increases more in Li_xCoO_2−δ than in Na_xCoO_2−δ. In addition, the data of O 1s XANES indicate that charge compensation by oxygen is more pronounced in Na_xCoO_2−δ than in Li_xCoO_2−δ.     

Synthesis of homologously pure bacteriochlorophyll-e and f analogues from BChls-c/d via transformation of the 7-methyl to formyl group and self-aggregation of synthetic zinc methyl bacteriopheophorbides-c/d/e/f in non-polar organic solvent

Homologously pure methyl bacteriopheophorbides-e and f (BPhes-e/f_M) were prepared from modification of naturally occurring bacteriochlorophylls-c and d (BChls-c/d), respectively, by transformation of the methyl to formyl group at the 7-position. The absolute configuration of the 1-hydroxyethyl group at the 3-position of (Zn-)BPhes-e/f_M was determined from comparison with structurally known BChl-c/d epimers. Visible spectra of synthetic (Zn-)BPhe-c/d/e/f_M showed that the 7¹-oxidation and the 8²/12¹/20-methylation affected Soret, Q_x and Q_y bands of both the monomeric (in a polar organic solvent) and oligomeric species (in a non-polar solvent).     

HRTEM study of cation-deficient perovskite-related AnBn−δO3n (n?4δ) microphases in the Ba5Nb4O15-BaTiO3 system

The occurrence of coherent intergrowths of cation-deficient perovskites in the Ba₅Nb₄O₁₅-BaTiO₃ system has been examined by high-resolution transmission electron microscopy and selected area electron diffraction. Because of their structural similarity, the simple members Ba₅Nb₄O₁₅ (n=5) and Ba₆TiNb₄O₁₈ (n=6) form coherent intergrowths—noted 5^P6¹—by the juxtaposition along the c-axis of P perovskite-like blocks n=5 and one perovskite-like block n=6, with P=1, 2 and 3. More generally, the ability to form intergrowths in the hexagonal perovskite systems is discussed considering the structural characteristics of the simple members. Examples taken from various systems show that the formation of such intergrowths is highly dependent on the size of the A cation present in simple members.     

Local environment in Ba2In2−xWxO5+3x/2 oxide ion conductors

The actual oxygen environment of the tungsten dopant in the Ba₂In_2−xW_xO_5+3x/2 solid solution was revealed by combining X-ray absorption spectroscopy at the tungsten L_I and L_III edges and at the indium L_I edge. Whatever the substitution ratio, the tungsten atoms exhibit a regular octahedral environment. When the substitution ratio increases, the oxygen vacancies are progressively filled until their total occupancy for x=2/3. For x?0.3, the perovskite structure is stabilised; the tungsten atoms are randomly distributed in the structure. Although X-ray diffraction revealed a cubic symmetry for these compositions, a local distortion of the indium environment is observed when a tungsten atom is in its surrounding.     

Tolerance factor rules for Sr1−x−yCaxBayMnO3 perovskites

Synthesis of new perovskite Sr_1−x−yCa_xBa_yMnO_3−δ compounds is described in detail and dependence of their phase stability and structural distortions on the tolerance factor is discussed. Oxygen contents have been measured over extended temperature and composition ranges. Neutron powder diffraction was used to precisely measure the A-O and Mn-O bond lengths and derive accurate interatomic distances [Ca-O], [Sr-O], [Ba-O], and [Mn-O]. By using these parameters instead of tabulated ionic radii we have derived the functional dependence of the tolerance factor t=t(x,y,T,δ) on composition, temperature, and oxygen content. At a fixed oxygen content, the tolerance factor is an increasing function of temperature as a result of greater thermal expansion of the average 〈A-O〉 bond relative to the 〈Mn-O〉 bond. We find that the stability of the perovskite phase at high temperature is governed, as expected, by the magnitude of tolerance factor (t?1) which can be adjusted by controlling the oxygen content 3−δ. This dependence of the tolerance factor on oxygen content and temperature can be utilized to design synthesis conditions for the controlled formation of the new, kinetically stable, perovskite phases.     

Structure refinement, dielectric, pyroelectric and Raman characterizations of Ba1−xLax(1−y)/2Euxy/2Nax/2TiO3 solid solution

The perovskite-type oxides Ba_1−xLa_x(1−y)/2Eu_xy/2Na_x/2TiO₃ (0?x?0.5 and xy=0.04) were synthesized and characterized by X-ray diffraction as well as dielectric measurements and Raman spectroscopy. The crystal structure of these ceramics has been determined by the Rietveld refinement powder X-ray diffraction data at room temperature. These compounds crystallize at room temperature in tetragonal space group P4mm for 0?x?0.1 and in the cubic group for 0.2?x?0.5. The phase transition temperature T_C (or T_m) decreases as x content increases. The degree of diffuseness of the phase transition is more pronounced for higher x content, implying the existence of a composition-induced diffuse phase transition of the ceramics with x?0.1. The evolution of the Raman spectra was studied as a function of various compositions at room temperature. The polarization state was checked by pyroelectric measurements.     

Effects of the A-site cation number on the properties of Ln5/8M3/8MnO3 manganites

The properties of manganites can be tuned by changing the doping level x in Ln_1−xM_xMnO₃. A second mechanism allows tuning of magnetic and electronic properties, for fixed x values, by varying the average A-cation radius, 〈r_A〉. Moreover, for fixed x and 〈r_A〉 values, the changes in the A-cation size variance, σ², also modify the ferromagnetic and metal-insulator transition temperatures. Here, we investigate the influence of the number of A-site cations on Ln_5/8M_3/8MnO₃ manganites, where x, 〈r_A〉 and σ² values are kept constant, and in the absence of phase separation phenomena. We have found that the number of cation species at the A site (N_A) has a strong influence on the width of the ferromagnetic and metal-insulator transitions, and a small influence on the average transition temperature. This behavior is opposite to that observed for increasing values of the variance σ² in manganites, with the same x and 〈r_A〉 values, where average transition temperatures are strongly reduced.     

Thermoelectric properties of polycrystalline La1−xSrxCoO3

Thermoelectric properties of polycrystalline La_1−xSr_xCoO₃, where Sr²⁺ is substituted in La³⁺ site in perovskite-type LaCoO₃, have been investigated. Sr-doping increases the electrical conductivity (σ) of La_1−xSr_xCoO₃, and also decreases the Seebeck coefficient (S) for 0.01?x?0.40. A Hall coefficient measurement reveals that the increase in electrical conductivity arises from increases in both carrier concentration and the Hall mobility. The decrease in the Seebeck coefficient is caused by a decrease in carrier effective mass as well as increase in carrier concentration. The highest power factor (σS²) is 3.7×10⁻⁴ W m⁻¹ K⁻² at 250 K for x=0.10. The thermal conductivity (κ) is about 2 W m⁻¹ K⁻¹ at 300 K for 0?x?0.04, and increases for x?0.05 because of an increase in heat transport by conductive carrier. The thermoelectric properties of La_1−xSr_xCoO₃ are improved by Sr-doping, and the figure of merit (Z=σS² κ⁻¹) reaches 1.6×10⁻⁴ K⁻¹ for x=0.06 at 300 K (ZT=0.048). For heavily Sr-doped samples, the thermoelectric properties diminish mainly because of the decrease in the Seebeck coefficient and the increase in thermal conductivity.     

Long-range ordering in the Bi1−xAexFeO3−x/2 perovskites: Bi1/3Sr2/3FeO2.67 and Bi1/2Ca1/2FeO2.75

Two-ordered perovskites, Bi_1/3Sr_2/3FeO_2.67 and Bi_1/2Ca_1/2FeO_2.75, have been stabilized and characterized by transmission electron microscopy, Mössbauer spectroscopy and X-ray powder diffraction techniques. They both exhibit orthorhombic superstructures, one with a≈b≈2a_p and c≈3a_p (S.G.: Pb2n or Pbmn) for the Sr-based compound and one with a≈b≈2a_p and c≈8a_p (S.G.: B222, Bmm2, B2mm or Bmmm) for the Ca-based one. The high-resolution transmission electron microscopy (HRTEM) images evidence the existence of one deficient [FeO_x]_∞ layer, suggesting that Bi_1/3Sr_2/3FeO_2.67 and Bi_1/2Ca_1/2FeO_2.75 behave differently compared to their Ln-based homolog. The HAADF-STEM images allow to propose a model of cation ordering on the A sites of the perovskite. The Mössbauer analyses confirm the trivalent state of iron and its complex environment with three types of coordination. Both compounds exhibit a high value of resistivity and the inverse molar susceptibility versus temperature curves evidence a magnetic transition at about 730 K for the Bi_1/3Sr_2/3FeO_2.67 and a smooth reversible transition between 590 and 650 K for Bi_1/2Ca_1/2FeO_2.75.     

Phase segregation in the Gd1−xSrxFeO3−δ series

Gd_1−xSr_xFeO_3−δ ferrites have been studied by means of X-ray powder diffraction in the whole composition range. Single-phase solid solution is found for x<0.09 and for x>0.63. At intermediate Sr content, phase segregation takes place. Compounds with x?0.05 crystallize in the orthorhombic structure, space group Pbnm. Oxygen-deficient Gd_1−xSr_xFeO_3−δ with x?2/3 are cubic or nearly cubic. The oxygen vacancies stabilize the cubic phase for x=2/3 whereas highly oxidized samples show an orthorhombic distortion, which has not been observed earlier. Magnetic and electrical properties have been measured for the single-phase solid solutions. Gd_1−xSr_xFeO_3−δ compounds with x?2/3 order antiferromagnetically below ∼100 K. In the paramagnetic region, their susceptibility follows the Curie-Weiss law in all but SrFeO_2.96 compound. These ferrites show semiconducting behavior in the electrical transport likely related to atomic disorder. We find that the conductivity activation energy becomes larger by increasing either the Gd content or the oxygen vacancies.     

Crystal structure and physical properties of quaternary clathrates Ba8ZnxGe46−x−ySiy, Ba8(Zn,Cu)xGe46−x and Ba8(Zn,Pd)xGe46−x

Three series of vacancy-free quaternary clathrates of type I, Ba₈Zn_xGe_46−x−ySi_y, Ba₈(Zn,Cu)_xGe_46−x, and Ba₈(Zn,Pd)_xGe_46−x, have been prepared by reactions of elemental ingots in vacuum sealed quartz at 800 °C. In all cases cubic primitive symmetry (space group Pm3?n, a∼1.1 nm) was confirmed for the clathrate phase by X-ray powder diffraction and X-ray single crystal analyses. The lattice parameters show a linear increase with increase in Ge for Ba₈Zn_xGe_46−x−ySi_y. M atoms (Zn, Pd, Cu) preferably occupy the 6d site in random mixtures. No defects were observed for the 6d site. Site preference of Ge and Si in Ba₈Zn_xGe_46−x−ySi_y has been elucidated from X-ray refinement: Ge atoms linearly substitute Si in the 24k site whilst a significant deviation from linearity is observed for occupation of the 16i site. A connectivity scheme for the phase equilibria in the “Ba₈Ge₄₆” corner at 800 °C has been derived and a three-dimensional isothermal section at 800 °C is presented for the Ba-Pd-Zn-Ge system. Studies of transport properties carried out for Ba₈{Cu,Pd,Zn}_xGe_46−x and Ba₈Zn_xSi_yGe_46−x−y evidenced predominantly electrons as charge carriers and the closeness of the systems to a metal-to-insulator transition, fine-tuned by substitution and mechanical processing of starting material Ba₈Ge₄₃. A promising figure of merit, ZT ∼0.45 at 750 K, has been derived for Ba₈Zn_7.4Ge_19.8Si_18.8, where pricey germanium is exchanged by reasonably cheap silicon.     

Etude par diffraction neutronique de la phase “Cs4−xYb12F40−x” (0 ≤ x ≤ 1): Hypothèse structurale

The structure of the phase Cs_4?xYb₁₂F_40?x(0 ≤ x ≤ 1) has been determined by a single-crystal neutron diffraction study. It has been solved in the space group P6₃mc and refined to the best R factor of 0.0535 for the formula Cs_3.4Yb₁₂F_39.4 (324 independent reflections). Three edge-sharing pentagonal bipyramids surrounding three ytterbium atoms form Yb₃F₁₆ groups and the structure is described as the superposition, according to the sequence A₁A₂B₁B₂A₁A₂…, of sheets of corner-sharing Yb₃F₁₆ groups with a possible transformation of bipyramids into octahedra in the A₂ and B₂ layers. These sheets are joined together by the axial fluorine atoms of the bipyramids or octahedra. Cesium atoms are located in the tunnels formed by their stacking. It is shown that the Cs_4?xYb₁₂F_40?x phase (0 ≤ x ≤ 1) is an intermediate step of the Cs_4?xYb₁₂F_40?x solid solution observed with 0 ≤ x ≤ 2 and corresponds to a superstructure of the high-temperature YbF₃ phase.