Cationic iridium-BINAP complex-catalyzed addition of aryl ketones to alkynes and alkenes via directed C-H bond cleavage

Cationic Ir complex ([Ir(cod)₂]BF₄ + BINAP) catalyzed the addition of ortho-C-H bonds in aryl ketones to alkynes, which gave alkenylated products in good to high yield. Styrene derivatives were good substrates, and the enantioselective addition to norbornene was also described.     

Titanium(IV) Bromide and Boron(III) Tribromide Promoted Baylis‐Hillman Reactions of Arylaldehydes with But‐3‐yn‐2‐one

The reaction of arylaldehydes with but‐3‐yn‐2‐one in the presence of the Lewis acids titanium(IV) bromide (TiBr₄) or boron(III) tribromide (BBr₃) (1.4 equiv.) can be drastically affected by the reaction temperature. When the reaction was carried out at ≤−20°, the brominated compound 1 was obtained as the major product. However, when the reaction was carried out at room temperature (20°), both the brominated compound 1 and dibrominated compound 2 were formed as major products. The substituent on the phenyl ring can affect the (E)/(Z) ratio. Moreover, with 2 as the substrate, the Pd‐catalyzed allylic substitution and Suzuki‐type coupling reaction have been examined.     

A new finding in selective Baeyer-Villiger oxidation of α-fluorinated ketones; a new and practical route for the synthesis of α-fluorinated esters

α-Fluorinated esters were effectively prepared by the Baeyer-Villiger oxidation of α-fluorinated ketones with m-chloroperbenzoic acid (m-CPBA) under mild conditions. The yield of the esters was influenced by the choice of solvent, base, and substituent on the aryl group of the ketones. 4-Methoxyphenyl substituted fluoroketones were oxidized almost quantitatively with m-CPBA within 10 min to 12 h at room temperature using 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) as a cosolvent with CH₂Cl₂ (1:1, v/v) and aqueous buffer (KH₂PO₄-NaOH, pH 7.6) as an additive base. The oxidation reaction rates of α-fluorinated ketones were higher than those of the corresponding non-fluorinated ketones. The fluorine atom at α-position of fluoromethyl aryl ketones enhanced the reactivity in the Baeyer-Villiger oxidation.     

Stereoselective synthesis of spiroannulated cyclopentenones by the Pauson-Khand reaction on carbohydrate derived enynes

The stereoselective synthesis of spiroannulated cyclopentenones by the Pauson-Khand reactions on hexose and pentose derived enynes was achieved under carbon monoxide free conditions using a stoichiometric quantity of Co₂(CO)₈. The cobalt complex of the alkyne was cleaved using dimethoxyethane-acetonitrile at 85 °C to furnish spiroannulated cyclopentenones in 75-94% yields.     

Gold-catalyzed consecutive [1,2] alkyl migration-oxygen transfer reaction of 2-alkynyl-1-tetralones

Gold-catalyzed isomerization of 2-alkynyl-1-tetralones afforded the corresponding 2-naphthylmethyl ketones in good to high yields. For example, the reaction of 2-{4-(methoxyphenyl)methyl}-2-(phenylethynyl)-3,4-dihydronaphthalen-1(2H)-one and 2-benzyl-2-(phenylethynyl)-3,4-dihydronaphthalen-1(2H)-one in the presence of 5 mol % of (Ph₃P)AuCl and 5 mol % of AgOTf in THF at 50 °C gave 2-{1-(4-methoxyphenylmethyl)naphthalen-2-yl}-1-(4-methoxyphenyl)ethanone and 2-(1-benzylnaphthalen-2-yl)-1-phenylethanone in 85% and 96% yields, respectively. The present reaction proceeds through [1,2] alkyl migration followed by oxygen transfer.     

Synthesis,spectral characterization,electrochemical properties and antimicrobial screening of sulfur containing acylferrocenes

Several known and eight new sulfur containing acylferrocenes of the general formula FcCO(CH₂)_nSR (where Fc = ferrocenyl, n = 1 or 2 and R = alkyl, 4-bromobenzyl or 2,6-dichlorobenzyl group) were synthesized in order to test their in vitro antimicrobial activity against 11 bacterial and three fungal/yeast strains. It has been shown that only four of the 14 ketones are completely inactive at the tested dose, while the activities of the other ones were noteworthy. All new compounds were well characterized by IR and NMR spectral data, and their electrochemical properties were investigated by cyclic voltammetry. The X-ray crystal structures of two representative ketones are also presented.     

Study of amphiphilic poly(1-dodecene-co-para-methylstyrene)-graft-poly(ethylene glycol). Part II: Preparation and micellization behavior of the amphiphilic copolymers

Poly(1-dodecene-co-pMS) copolymers were brominated by HBr/H₂O₂ system with high selectivity at the methyl groups of pMS units. It was found that longer reaction time, higher pMS content, and lower molecular weight of the copolymers were helpful for higher degree of bromination. Through a modified Williamson ether synthesis, poly(ethylene glycol) monomethyl ethers (PEG) were grafted onto the brominated copolymers, and the amphiphilic poly(1-dodecene-co-pMS)-graft-PEG copolymers which can be readily dissolved in n-octane were successfully synthesized. Due to their amphiphilic characteristics, they can self-assemble spontaneously into reverse micelles in n-octane. Their micellization behaviors were investigated by fluorescence probe technique, transmission electron microscopy (TEM), and dynamic light scattering (DLS). The critical micelle concentrations of the three copolymers in n-octane were determined at about 1.26 × 10⁻⁴, 1.58 × 10⁻⁴, and 1.95 × 10⁻⁴ g ml⁻¹ by fluorescence measurements. The morphologies of micelles were preliminarily explored by TEM and were found to be spheres.     

Et3N-Promoted reaction of acetylenic ketones with N-(diphenylmethylene)glycinates: an efficient synthesis of α,β-dehydroamino acid derivatives

An efficient procedure for preparation of α,β-dehydroamino acids from the reaction of acetylenic ketones with N-(diphenylmethylene)glycinates 2 is described. The reaction of terminal acetylenic ketones with 2 promoted by Et₃N at −10 °C gave the dehydroamino acids containing ketone group in good yields.     

Palladium-catalyzed coupling of vinyl tosylates with arylsulfinate salts

The first palladium-catalyzed coupling of vinyl tosylates with arylsulfinate salts is described. A variety of cyclic and acyclic vinyl tosylates were coupled with aryl sulfinate salts using 2.5 mol % Pd₂(dba)₃/5.0 mol % XantPhos to give vinyl aryl sulfone products in good yields. The coupling was extended to the preparation of a cyclopropyl vinyl sulfone.     

The development of a facile tandem Wolff/Cope rearrangement for the synthesis of fused carbocyclic skeletons

A set of mild processes for the conversion of vinyl cyclopropyl diazo ketones to highly functionalized cycloheptadienones and vinyl cyclopentenones by use of a target-inspired tandem Wolff/Cope rearrangement sequence is described. A divergent reaction course of the vinyl cyclopropyl diazo ketone substrates under sono- or photochemical activation provides good to excellent yields (55-98%) of the product cycloheptadienones and vinyl cyclopentenones.     

Alkyne-functionalized metallocene complexes: Synthesis, structure, and catalytic ethylene polymerization

Reactions of phenylethynyl lithium with substituted cyclopentenones gave the corresponding pendant phenylethynyl substituted cyclopentadienes. Subsequent deprotonation and transmetallation with TiCl₄·2THF, ZrCl₄, and Cp^∗ZrCl₃ yielded the alkyne-functionalized metallocene complexes [C₅Me₄(CCPh)]₂MCl₂ [M = Ti (1), Zr (2)], Cp^∗[C₅Me₄(CCPh)]ZrCl₂ (3), and Cp^∗[C₅H₂R′₂(CCPh)]ZrCl₂ [R′ = Me (4), Ph (5)]. These complexes were fully characterized by ¹H NMR, ¹³C NMR, MS spectra, and elemental analysis. The molecular structure of 2 was determined by single crystal X-ray diffraction analysis. Ethylene polymerization was studied with these complexes in the presence of methylaluminoxane (MAO).     

Inverse electron demand asymmetric cycloadditions of cyclic carbonyl ylides catalyzed by chiral Lewis acids—Scope and limitations of diazo and olefinic substrates

High enantioselectivities (94-96% ee) were obtained for the inverse electron-demand 1,3-dipolar cycloadditions between cyclohexyl vinyl ether and 2-benzopyrylium-4-olate generated via Rh₂(OAc)₄-catalyzed decomposition of o-methoxycarbonyl-α-diazoacetophenone. The reactions were effectively catalyzed by Eu(OTf)₃, Ho(OTf)₃, or Gd(OTf)₃ complexes (10 mol %) of chiral 2,6-bis[(4S,5S)-4,5-diphenyl-2-oxazolinyl]pyridine. The reactions with the other electron-rich dipolarophiles such as allyl alcohol, 2,3-dihydrofuran, and butyl-tert-butyldimethylsilylketene acetal showed moderate enanantioselectivities (60-73% ee). Good to high enantioselectivities (73-97% ee) were also obtained for the cycloadditions between 3-acyl-2-benzopyrylium-4-olates, generated from methyl 2-(2-diazo-1,3-dioxoalkyl)benzoates and butyl or cyclohexyl vinyl ethers, in the presence of binaphthyldiimine (BINIM)-Ni(II) complexes (10 mol %). Under similar conditions, the reaction between methyl 2-(2-diazo-1,3-dioxohexyl)benzoate and 2,3-dihydrofuran was highly endo-selective, and moderately enantioselective (70% ee). For the BINIM-Ni(II)-catalyzed reactions of cyclohexyl vinyl ether, the use of an epoxyindanone as the 3-acyl-2-benzopyrylium-4-olate precursor revealed that the chiral Lewis acid can function as a catalyst for asymmetric induction. The scope of the cyclic carbonyl ylides was extended to those generated from 1-diazo-2,5-pentanedione derivatives, which were reacted with butyl or TBS vinyl ether and catalyzed using the (4S,5S)-Pybox-4,5-Ph₂-Lu(OTf)₃ complex to give good levels of asymmetric inductions (75-84% ee).     

Asymmetric reduction of perfluoroalkyl ketones with chiral lithium alkoxides

Reduction of perfluoroalkyl ketones with chiral lithium alkoxides gave chiral α-perfluoroalkyl alcohols in high enantiomeric excesses. Interestingly, reaction of 2,2,2-trifluoroacetophenone (1) with lithium (S)-1-phenylethoxide (2) gave (S)-2,2,2-trifluoro-1-phenylethanol (3), while the same reaction of perfluorooctan-1-one (7) with 2 gave (R)-1H-1-phenylperfluorooctanol (8). Based on the speculation of mechanism, the order of steric effects on this reaction is estimated as C₇F₁₅ > substituted phenyl > CF₃.     

Rapid access to homoallylic alcohols via Pd(OAc)2 catalyzed Barbier type allylation in presence of DMAP

DMAP was found to accelerate significantly the rate of Pd(OAc)₂ catalyzed Barbier type allylation of carbonyl compounds by allylbromide using SnCl₂·2H₂O as reducing agent. Both aldehyde as well as ketones produced excellent yields within a short reaction time in the presence of 3 mol % of Pd(OAc)₂ and 12 mol % of DMAP at room temperature. Aldehydes could be allylated within 5–10 min whereas, in case of ketones, the reaction completes in 45–120 min.     

Direct reductive amination and selective 1,2-reduction of α,β-unsaturated aldehydes and ketones by NaBH4 using H3PW12O40 as catalyst

A simple and convenient procedure for direct reductive amination of aldehydes and ketones with sodium borohydride is described. The reaction has been carried out in methanol in the presence of a catalytic amount of H₃PW₁₂O₄₀ (0.5 mol %). α,β-Unsaturated aldehydes and ketones can be easily converted into the corresponding allyl alcohols by reaction with H₃PW₁₂O₄₀ (0.5 mol %)/NaBH₄.     

Oxidation of acyclic alkenes and allyl and benzyl ethers with DIB/t-BuOOH/Mg(OAc)2

Oxidation of (11Z)-1′,2′-didehydrostemofoline with DIB/TBHP/Mg(OAc)₂·4H₂O resulted in oxidative cleavage of the C-11–C-12 double bond instead of the desired allylic oxidation of the 1-butenyl side chain. Stemofoline gave a similar result. The oxidation of more simple terminal alkenes was regioselective and gave vinyl ketones while allyl and benzyl ethers gave acrylate and benzoate esters, respectively. Allyl and benzyl ethers could be chemoselectively oxidized in the presence of a terminal alkene or benzyl group. Oxidation of an internal alkene was poorly regioselective, in contrast to the oxidation of 1-substituted cyclohexenes.     

Photoinitiation by radical-cationic mechanism in the polymerization of isobutylene with lewis acids

ESR spectra of Lewis acids (VCl₄, TiCl₄, TiBr₄, SnCl₄, and AlBr₃) and their mixtures with isobutylene were investigated in a n-heptane solution in the dark and under irradiation at 400–480 nm at ?80 to ?150°C. A signal was observed only upon irradiating mixtures of VCl₄, TiCl₄, or TiBr₄ and isobutylene. The signal was identified as an isobutylene radical-cation by comparison with a simulated spectrum. A signal indicating the presence of peroxy radicals were recorded in measurements carried out in the presence of oxygen; these radicals originated from reaction of the isobutylene radical-cation with oxygen. Radical-cation initiation by visible light is indicated by the polymerization of isobutylene by VCl₄, TiCl₄, and TiBr₄ and by ESR spectra. The inhibiting effect of oxygen in photochemically initiated polymerization of isobutylene was also elucidated.     

The transition metal catalyzed hydroboration of enamines

The addition of catecholborane (HBcat, cat = 1,2-O₂C₆H₄) to 9-vinylcarbazole can give either the branched or linear hydroboration product depending upon the judicious choice of metal catalyst used in these reactions. Analogous reactions with pinacolborane (HBpin, pin = 1,2-O₂C₂Me₄) and HBBzpin (Bzpin = 1,2-O₂C₂Ph₄) using catalytic amounts (5 mol%) of either Rh(acac)(dppb) or [Cp^∗IrCl₂]₂ gave the linear hydroboration product selectively. Hydroborations of 1-pyrrolidino-1-cyclopentene and 1-pyrrolidino-1-cyclohexene were complicated by a competing dehydrogenative borylation pathway. The branched isomer was not observed to any significant extent in these reactions, suggesting that the directing effect of the nitrogen atom is negligible. Although catalyzed additions of HBcat to 1-vinyl-2-pyrrolidinone gave complicated product distributions arising from competing reactions, addition of HBpin effectively generated the corresponding linear hydroboration product in good yields.     

Synthesis of α-aminonitriles under mild catalytic,metal-free conditions

α-Aminonitriles have been synthesized by a Strecker synthesis from aldehydes and ketones under mild catalytic, metal-free conditions. Aromatic aldehydes (1 equiv) were reacted with aromatic and 1° or 2° aliphatic amines (1 equiv) in EtOH containing 3 mol % of NH₄Cl to give high yields of α-aminonitriles. An alternative to adding NH₄Cl as a catalyst involved the use of excess TMSCN (1 equiv) and to promote the process. The reaction was also successful under microwave conditions using excess TMSCN with no solvent. Ketones similarly reacted with aromatic amines and excess TMSCN under conventional and microwave heating, but 30 mol % of added NH₄Cl was required for optimum conversion.     

Tetra­bromo(2,6‐di­methyl­pyridine‐N)titanium(IV), a twinned crystal ­structure

The reaction of 2,6‐di­methyl­pyridine with TiBr₄ affords the title compound, [TiBr₄(C₇H₉N)], which is the first example of a neutral TiBr₄L complex (L is a singly bonded ligand). The environment around the Ti atom can be described as a somewhat distorted trigonal bipyramid, with the nitro­gen base occupying an equatorial position. The crystal was a non‐merohedral twin.