Iodometric submicro determination of alpha-amino-alcohols by an amplification reaction

New methods are described for the iodometric submicro determination of alpha-aminoalcohols possessing primary, secondary or tertiary amino-groups which involve 6-, 12-, and 18-fold amplification reactions, respectively. The methods are based on reaction of the alpha-amino-alcohols with an excess of potassium periodate in a slightly alkaline medium, masking of the unreacted periodate with molybdate at pH 3.2 and, after addition of iodide, iodometric determination of the equivalent amounts of iodate released. In addition to being simple and rapid, the methods are sufficiently selective and specific and also highly accurate, being particularly suitable for the analysis of submicro amounts (50-150 microg); the average recovery is 99.9%.     

Iodometric microdetermination of hydrazines by amplification reactions

Two new, simple, rapid, and accurate iodometric amplification methods are described for the micro and submicro determination of hydrazine. The first depends on oxidation with a chloroform solution of iodine and removal of its excess, oxidation of the resulting iodide with bromine, and iodometric titration of the liberated iodate. The second method is based on oxidation with periodate at pH 8, masking of the excess of periodate with molybdate at pH 3, and iodometric titration of the iodate. The order of amplification involved in the two methods is 6- and 3-fold, respectively. Micro amounts of hydrazine sulphate and dihydrochloride were determined satisfactorily by both methods, the average recoveries being 98.6 and 99.4%.     

Micro and submicro iodometric determination of arsenite and sulphite ions by amplification reactions

Two methods are described for the micro and submicro iodometric determination of arsenite and sulphite ions involving 3- and 6-fold amplification reactions, respectively. The arsenite method is based on oxidation with an excess of periodate, masking of the unreacted periodate with molybdate, and final iodometric titration of the iodate released. The sulphite method depends upon oxidation with iodine and removal of its excess by extraction with chloroform, and oxidation of the iodide formed to iodate, which is determined iodometrically as usual. The two methods are simple, rapid, and accurate. The average recoveries obtained are 99.9 and 99.3% for arsenite and sulphite, respectively.     

Iodometric microgram determination of chromium(III) and (VI) by use of chemical amplification reactions

A simple, rapid and sensitive method is described for the iodometric determination of microgram amounts of chromium(III), based on the oxidation of chromium(III) with periodate at pH 3.2, removal of the unreacted periodate by masking with molybdate and subsequent iodometric determination of the liberated iodate. Chromium(VI) can be determined by this method after prior reduction to chromium(III) with sodium sulphite. The method can also be used for the analysis of organochromium compounds.     

Extraction-spectrophotometric determination of vanadium with 5,5′-dithiodisalicylhydroxamic acid (DTDSHA)

A new method for the extraction-spectrophotometric determination of V(V) is proposed. The violet complex V(V)-5,5′-dithiodisalicylhydroxamic acid formed in aqueous medium (pH 5.0) is extracted into a solution of trioctylmethylammonium chloride (Adogen 464) in toluene, and its spectrophotometric characteristics are studied. The stoichiometry of the complexes formed is 1:1 and 2:1 (reagent:vanadium), and 1:3 for the ionic association complex (2:1):trioctylmethylammonium ion. The system follows Beer's law at pH 5.0 (λ = 550 nm) over the concentration range 0.4 to 2.0 ppm (ε = 7.34 × 10³ liter · mol⁻¹ · cm⁻¹). The method is applied for the determination of vanadium in steel.     

Iodometric microgram determination of Mn(II) in aqueous media by an indirect chemical amplification reaction

A rapid, simple and highly sensitive iodometric amplification method is described for the determination of microgram amounts of Mn(II). The method is based on oxidation of Mn(II) with an excess of periodate in acetate buffer (pH 2.8-3.0), masking of the unreacted periodate with molybdate, and after addition of iodide, titration of the liberated iodine is with thiosulphate. The proposed method offers 20-fold amplification for Mn(II) and was found suitable for the determination of Mn(II) in the presence of permanganate ions. Mn(II) in tap water and an industrial waste water has been successfully determined by the proposed method.     

Rapid analysis of cation-exchangeable property in acidic soil : III. Sensitive spectrophotometric determination of microgram amounts of exchangeable magnesium with xylidyl Blue I in the presence of cetyltrimethylammonium bromide (CTAB)

A simple and sensitive procedure for Spectrophotometric determination of exchangeable magnesium has been developed. At 0.15 – 0.375 N ammonia, magnesium reacts with xylidyl Blue I in the presence of CTAB to form a colored ternary complex, which has an absorption maximum at 524 nm. The molar absorption coefficient is 2.2 × 10⁴ liters · mol⁻¹ · cm⁻¹. The Beer rule will be valid for concentrations from 0 to 8 μg/20 ml magnesium. The method has been used for rapid determination of microgram amounts of exchangeable magnesium in acidic soil with good reproducibility.     

Plutonium and uranium determination in environmental samples: combined solvent extraction-liquid scintillation method

A method for the determination of uranium and plutonium by a combined high-resolution liquid scintillation-solvent extraction method is presented. Assuming a sample count equal to background count to be the detection limit, the lower detection limit for these and other alpha-emitting nuclides is 1·0 dpm with a Pyrex sample tube, 0·3 dpm with a quartz sample tube using present detector shielding or 0·02 d.p.m. with pulse-shape discrimination. Alpha-counting efficiency is 100%. With the counting data presented as an alpha-energy spectrum, an energy resolution of 0·2–0·3 MeV peak half-width and an energy identification to ±0·1 MeV are possible. Thus, within these limits, identification and quantitative determination of a specific alpha-emitter, independent of chemical separation, are possible. The separation procedure allows greater than 98% recovery of uranium and plutonium from solution containing large amounts of iron and other interfering substances. In most cases uranium, even when present in 10⁸-fold molar ratio, may be quantitatively separated from plutonium without loss of the plutonium. Potential applications of this general analytical concept to other alpha-counting problems are noted. Special probelems associated with the determination of plutonium in soil and water samples are discussed. Results of tests to determine the pulse-height and energy-resolution characteristics of several scintillators are presented. Construction of the high-resolution liquid scintillation detector is described.     

Extractive-spectrophotometric determination of trace amounts of potassium with cryptand 2.2.2 and methyl orange

A spectrophotometric study on the extraction of potassium into chloroform as an ion pair, formed between the cryptand 2.2.2-potassium complex and the highly colored methyl orange counterion, is described. Optimum conditions for extraction are established (potassium recovery 100.2 ± 3.5%) and a new spectrophotometric determination of trace amounts of potassium is proposed (linear working range: 0.3–3.5 ppm of K⁺; apparent molar absorptivity: 2.2 × 10⁴ liters · mol⁻¹ · cm⁻¹; precision, in terms of relative standard deviation: 1.9%). The actual possibilities of predicting relevant analytical performance characteristics (i.e., sensitivity, selectivity, and precision) of these methods in the light of known complexing ability of cryptands in aqueous phase are discussed. The results obtained in this study are compared with those previously obtained using crown ethers as ligands.     

Extraction and spectrophotometric determination of trace amounts of niobium with diphenylglioxal-bis-(2-hydroxybenzoylhydrazone)

A method is described for the direct spectrophotometric determination of microamounts of niobium based on its extraction into chloroform with dephenylglyoxal-bis-(2-hydroxy benzoyl) hydrazone (BSHB). This reagent builds up a chelate with Nb(V) in very acidic media, its chloroform solution being pink to reddish depending on niobium concentration (λ_max = 495 nm). Optimum conditions for chelate extraction and niobium determination have been established. The precision of procedure proposed, expressed in terms of relative standard deviation, is ±1.0%.It is shown that the method is sensitive, the molar absorptivity being 1.95 ± 0.02 × 10⁴ liter · mol⁻¹ · cm⁻¹ in the organic phase, and the interferences study demonstrates a high selectivity against common cations and the majority of those accompanying niobium in its natural sources and special alloys.     

Copper(II)-cetyltrimethylammonium chloride-chromal blue G ternary complex and its application to the spectrophotometric determination of copper(II)

A sensitive spectrophotometric method for the determination of copper(II) based on a ternary complex with chromal blue G, a triphenylmethane reagent in the presence of cetyltrimethylammonium chloride, is described. The sensitivity of color reaction between copper and chromal blue G has been greatly increased by the sensitizing action of cetyltrimethylammonium chloride, a cationic surfactant. The color development of the ternary complex can be utilized in the highly sensitive spectrophotometric determination of copper. The molar absorptivity of the binary complex between copper and chromal blue G ε_630nm = 9.56 × 10³liters · mol⁻¹ · cm⁻¹ is enchanced on ternary complex formation to ε_{542 nm} = 4.78 × 10⁴liters · mol⁻¹ · cm⁻¹. The ternary complex gave a maximal absorbance at 542 nm in the pH range 9.8–11. Beer's law is obeyed up to at least 1.2 ppm of copper. The maximal absorbance of the ternary complex was found to develop within 5 min and then it remains constant for several hours. The formation constant of the ternary complex is calculated to be 8.6 × 10¹⁰ under these conditions.     

Spectrophotometric determination of titanium in plants using 5,5′-thiodisalicylic acid

Titanium (IV) forms a yellow-colored chelate with 5,5′-thiodisalicylic acid, whose sensibility is pD = 6.1 between pH 4 and 6. The stoichiometry of the complex formed is 1:1 at pH 0.5. The system follows Beer's law at pH 4.9 (λ = 385 nm) over the concentration range 0.6–3.2 ppm (ε = 16000 liters · mol⁻¹ · cm⁻¹). The method can be suitably used for determination of titanium in plants.     

A study of the spectrophotometric determination of traces of cadmium(II) and copper(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in the presence of polyglycol octylphenyl ether

A spectrophotometric study of the Cd(II) and Cu(II) complex of a new reagent, 2-(5-bromo-2-pyridylazo)-5-diethylamino phenol (5-Br-PADAP) in the presence of polyglycol octylphenyl ether (OP) is presented. A reddish binary complex is formed at pH 9 and shows maximal absorbance at 560 nm with molar absorptivity of 1.16 × 10⁵ · mol⁻¹ · cm⁻¹ liter (Cd), 1.5 × 10⁵ mol⁻¹ · cm⁻¹ · liter (Cu). Beer's law is followed over the range 0.0 to 20 μg cadmium(II) and 0.0–18 μg copper(II). The continuous variation method and molar ratio method showed that the metal ligand ratio is 1:2; ordinarily, most ions do not interfere with the determination and the method can be applied for direct spectrophotometric determination of cadmium(II) and copper(II) in actual samples and the results obtained are satisfactory.     

Dynamical Spin Chirality and Magnetoelectric Effect of α-Glycine

Dynamical spin chirality of α-glycine crystal at 301−302 K was investigated by DC (direct current)-magnetic susceptibility measurement at temperatures ranging from 2 to 315 K under the external magnetic fields (H=±1 T) parallel to the b axis. The α-glycine crystallizes in space group P2₁/n with four molecules in a cell, which has centrosymmetric charge distribution. The bifurcated hydrogen bonds N⁺(3)−H(8)···O(1) and N⁺(3)−H(8)···O(2) are stacked along the b axis with different bond intensities and angles, which form anti-parallel double layers. Atomic force spectroscopy result at 303 K indicated that the surface molecular structures of α-glycine formed a regular flexuous framework in the b axis direction. The strong temperature dependence is related to the reorientation of NH³⁺ group and the electron spin flip-flop of (N⁺H) mode. Under the opposite external magnetic field of 1 T and −1 T, the electron spins of N⁺(3)−H(8)···O(1) and N⁺(3)−H(8)···O(2) flip-flop at 301−302 K. These results suggested a mechanism of the magnetoelectric effect based on the dynamical spin chirality of (N⁺H), which induced the electric polarization to produce the onset of pyroelectricity of α-glycine around 304 K.     

Computer automation of polarographic analyzer PAR 384B and development of specific implementation software

The automation of Polarographic Analyzer PAR 384B by connecting it to an HP 9816S Technical Computer is presented. The connection itself transforms an analytically oriented instrument towards one which is more appropriate for research work. Specific implementation software is developed in order to enable and facilitate pseudopolarographic measurements and evaluation of heavy-metal complexation phenomena. As as example, the procedure for the simultaneous determination of the stability constants of lead and cadmium present in constant ionic strength medium of X mol/dm³ NaCl + (4 − X) mol/dm³ NaClO₄ is presented. The results obtained, for lead, β₁ = 9±1, β₂ = 92±13, β₃ = 99±21, β₄ = 27±6, and for cadmium, β₁ = 44±3, β₂ = 194±36, β₃ = 816±67, β₄ = 68±24, are in agreement with the literature data.     

Spectrophotometric determination of vanadium in steel and alloys with 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol

Using spectrophotometric methods, the protopysis constant of the 5.ClDMPAP reagent (pK_a1 = −0.19; pK_a2 = 1.97; pK_a3 = 11.98) and the stability constant of its vanadic complex (6.0 ± 0.11) × 10¹⁴ were determined. A high-sensitivity spectrophotometric method was developed to determine V(V) using 0.1–1.2 ppm and pH = 3.8. ε₅₈₆ = 55,300 ± 400 liters · mol⁻¹ · cm⁻¹. A study on the most important interferences and the way to eliminate them was carried out. The method can be applied to the determination of the element in steels and ferrovanadiums.     

Chemical amplification methods for the sequential determination of trace amounts of ruthenium by titrimetric and spectrophotometric procedures

Two simple, inexpensive and rapid iodometric and spectrophotometric procedures were developed for trace amount determination of ruthenium. The proposed methods were based on the oxidation of ruthenium(II or III) with sodium periodate at pH 2.4-3.6, masking the excess periodate with sodium molybdate. The released iodate was then allowed to react with KI at pH 3, with subsequent determination of the released iodine spectrophotometry as triiodide at 350 nm or iodometry with 0.005 M sodium thiosulphate. This procedure offers an 18- and 15-fold amplification per Ru(II) or Ru(III) ion, respectively. Alternatively, the produced iodine was extracted with CHCl(3), shaken with an aqueous solution of sodium sulphite and the produced iodide ion was then allowed to react with bromine (or sodium periodate). The released iodate was subsequently determined by iodometry or spectrophotometry after addition of KI. The bromine and sodium periodate oxidation procedures offered 90- and 360-fold amplification per ruthenium(III) ion, and 108- and 432-fold amplification per ruthenium(II) ion. Ruthenium(IV) content was determined by these procedures after prior reduction to Ru(III) with sulphurous acid. The binary mixtures Ru(II)-Ru(III); Ru(III)-Ru(IV) and Ru(II)-Ru(IV) in aqueous solution at concentration 0.05 mug ml(-1) were successfully analyzed by the developed procedures. The utility of the proposed methods for the analysis of ruthenium in its complexes was demonstrated. Natural seawater and seawater spiked with ruthenium were analyzed satisfactorily.     

Determination of Trace Amount of Silver by Atomic-Absorption-Spectrometry-Coupled Flow Injection On-Line Coprecipitation Preconcentration Using DDTC–Copper as Coprecipitate Carrier

A flow injection on-line coprecipitation preconcentration system with diethyldithiocarbamate (DDTC) chelate of copper used as the coprecipitate carrier was coupled with flame atomic absorption spectrometry (FAAS) for the determination of trace silver. Silver was on-line coprecipitated with DDTC-Cu(II) in 0.5 moL · L⁻¹HCl, and the precipitate was collected in a knotted reactor. The precipitate was then dissolved by isobutyl methyl ketone and transported directly into the nebulizer–burner system of a flame atomic absorption spectrometer. A detection limit (3ς) of 0.6 μg · L⁻¹was achieved for a loading period of 30 s, a relative standard derivation of 2.0% was obtained for 11 determinations of 20 μg · L⁻¹Ag(I). Interference-free levels were 10 mg · L⁻¹for Cd²⁺, 50 mg · L⁻¹for Cu²⁺, 50 mg · L⁻¹for Mn²⁺, 25 mg · L⁻¹for Ni²⁺, 100 mg · L⁻¹for Pb²⁺, 50 mg · L⁻¹for Zn²⁺, 500 mg · L⁻¹for Fe³⁺, and 2000 mg · L⁻¹for Fe²⁺reduced from Fe³⁺by ascorbic acid. The developed method has been successfully applied to the determination of trace amount of silver in geological samples.     

Spectral correlations for β-chlorovinyl ketones

The IR and UV spectroscopic data of a series of alkyl substituted β-chlorovinyl ketones have been determined. Some of the IR and UV spectroscopic criteria, developed for the S-cis or S-trans conformation of ordinary α,β-unsaturated ketones, seem to be applicable for the β-chlorovinyl ketones: the S-cis conformer shows a low ratio (rⁱ) of the integrated intensities of the carbonyl and double bond stretching vibrations and a relatively low UV ε value; whereas high rⁱ and ε values are found for the S-trans conformer; non-planarity increases the rⁱ value and decreases the ε value.The prefered conformations as determined by the IR and UV spectral data have led to the presentation of benzene solvation models for a series of β-chlorovinyl ketones. These models made it possible to assign thecis ortrans structure to α,β-dialkyl-β-chlorovinyl ketones on the basis of the NMR aromatic solvent induced shifts of the β-alkyl group: high solvent shifts to a higher field (0·31–0·66 ppm) are found forcis-β-chlorovinyl ketones, whereas low solvent shifts (0·040·15) are found for thetrans-β-chlorovinyl ketones. Assignments based on the chemical shifts alone can lead to erroneous interpretations.     

Supramolecular assemblies based on some new methyl-substituted cucurbit[5]urils through hydrogen bonding

Three supramolecular assemblies based on three new partial methyl-substituted cucurbit[5]urils, which are tetramethylcucurbit[5]uril (α,γ-TMeQ[5]), hexamethyl cucurbit[5]uril (α,β,δ-HMeQ[5]), Nonamethylcucurbit[5]uril (NMeQ[5]), were synthesized and structurally characterized by single-crystal X-ray diffractions. For the comparison with these new Q[5]s, crystal structure of an assembly constructing with normal Q[5] and K₂PtCl₆ was also reported. They are (α,γ-TMeQ[5])·15(H₂O) (1), (α,β,δ-HMeQ[5])·2Cl⁻·2(H₃O)⁺·7(H₂O) (2), (NMeQ[5])·14(H₂O) (3), (4). In the corresponding crystal structures, the molecular encapsulates included a water molecule and lidded water molecules at both of the portals were observed. Moreover, these molecular encapsulates are connected through hydrogen bonding and formed supramolecular chains or joined in pair.