基于有序生物膜的电容型层胶粘蛋白新型免疫传感器

免疫传感器以其高度特异性抗原抗体结合反应的特点 ,可直接、快速而灵敏地测定抗原或抗体分子而被广泛应用于临床医学以及环境污染物检测等领域 [1] .目前 ,检测抗原抗体结合的无标志方法主要有石英晶体微天平 [2 ] 、表面等离子共振 [3 ] 、界面电容 [4 ] 及原子力显微镜 [5]     

压电胰岛素-C肽微阵列免疫传感器研究

以AT切型、基频10MHz的镀金膜石英晶体作为换能器,将抗人胰岛素和C肽单克隆抗体固定在石英晶体电极表面,用2×5检测池固定夹具构建一种新型压电胰岛素-C肽微阵列免疫传感器.研究了抗体固定方法、抗体工作浓度、固定量、一致性以及传感器的响应参数如检测温度、时间和特异性等的影响.该微阵列传感器在胰岛素浓度为2.5～160.0mIU/L、C肽浓度为0.375～12.0ng/mL范围内响应特性良好,压电晶体频率偏移值与胰岛素和C肽浓度呈良好的线性关系.将此微阵列传感器用于人血清标本的测定,结果与放射免疫法符合(r为0.92和0.94).此微阵列传感器具有灵敏度高、特异性好,低密度阵列结构,检测通量较高,不需标记,操作简单、能实时在线检测和重复使用等优点,能用于临床实验诊断,具有临床推广应用价值.     

基于酶催化银沉积质量放大的血吸虫压电免疫传感器的研究

发展了一种基于酶催化金属银沉积信号放大的新型高灵敏气相压电免疫传感检测技术.先将血吸虫抗原(SjAg)共价固定在石英晶体表面,制备得到血吸虫压电免疫传感器.检测时,在晶振上滴加不同浓度的待测血吸虫抗体,再将碱性磷酸酶标记的二抗通过夹心方式结合到传感器表面.然后利用碱性磷酸酶催化磷酸化的抗坏血酸酯水解从而还原硝酸银,使金属银沉积在晶振表面上,放大传感器的质量响应信号.实验结果表明该传感检测方法可显著提高气相压电免疫传感器的检测灵敏度,传感器对血吸虫抗体的响应线性范围在1～225 ng/mL,检测下限为1 ng/mL.     

压电免疫传感器在梅毒检测中的研究

用巯基丙酸(MPA)为基层物质在压电石英晶体表面形成单分子膜,经过N-乙基-N′-(3-二甲氨基)丙基碳化二亚胺盐酸(EDC)和N-羟基琥珀酰亚胺(NHS）活化后固定梅毒抗原TpAg,制成免疫传感器检测不同浓度的标准抗体溶液。并考察了传感器的响应特性和免疫反应动力学特性,结果表明这种免疫传感器是临床检测的有效工具,有巨大的应用潜力。     

用于乙肝表面抗原检测的压电免疫传感器的研制

研制了一种用于乙肝表面抗原（ＨＢｓＡｇ）检测的新型传感器———石英压电免疫传感器。采用聚乙烯亚胺粘附和戊二醛交联法在金电极上固定抗体蛋白，对固定化过程进行了监测。ＨＢｓＡｇ含量的检测范围为１～４０ｍｇ／Ｌ。使用过的电极用０２ｍｏｌ／Ｌ乙醇胺（ｐＨ＝８）解吸，可重复使用。将此传感器用于实际血清样品的检测，与酶联免疫吸附法所得结果吻合。     

甲胎蛋白压电免疫传感器的研究

以合成的甲基丙烯酸甲酯和甲基丙烯酸羟乙酯共聚作载体，在压电石英晶体表面涂覆共聚物涂层，经ＣＮＢｒ活化后固定ＡＦＰ抗体，研制成ＡＦＰ压电晶体免疫传感器，研究了固定化方法，载体量，抗原抗体结合时间，重现性选择性等实验条件和参数的影响，压电晶体的频移值与ＡＦＰ浓度在１００ｎｇ／ｍＬ～８００ｎｇ／ｍＬ的范围内有良好的线性关系，将此传感器初步用于人体血清样品的测定，并与放射免疫法对照，结果令人满意。     

表面等离子共振生物传感系统构建及应用研究

本文构建了以TI-Spreeta传感器为基础敏感元件、集微流道系统和数据信号处理电控盒于一体的表面等离子共振生物传感分析系统.在乙醇体积分数0.00～0.60浓度范围内检测乙醇标准溶液时,体积分数改变0.1,将引起共振像素位置变化约9.4个像素数目,表明传感系统的可逆性和重复性良好.采用自组装成膜技术制备了传感器敏感膜,观察了乙肝表面抗原和乙肝表面单克隆抗体的结合、解离以及传感器敏感膜的再生等动态变化过程.与传统的酶联免疫检测法相比,本方法具有无需酶标记、灵敏准确、快速,能够实现在线连续监控检测等优点,在食品安全、环境监测、药物筛选和生物医学研究中具有较大的应用潜力.     

纳米磁性微球免疫伏安法测定乙肝表面抗原

采用化学键合法将乙肝抗体固化在自行制备的纳米磁性高分子功能微球表面 ,利用免疫夹心反应原理 ,捕获溶液中的乙肝表面抗原和标记有辣根过氧化物酶的乙肝第二抗体 .在外加磁场的作用下 ,抗体抗原结合物从样品溶液中分离 ,在含有邻氨基苯酚和过氧化氢的底液中 ,生成具有电活性的化合物 3 氨基吩呃嗪 ,用示差脉冲伏安法进行测定 .响应电流与乙肝表面抗原浓度分别在 0 2～ 1 0和 1 0～ 5 0 0ng·mL-1成线性关系 ,检出限达 0 0 60ng·mL-1.采用本方法检测血清中乙肝表面抗原 ,灵敏度大大高于目前临床采用的酶联免疫吸附法 .     

压电免疫传感器用于B因子测定

B因子是一种不耐热的球蛋白,它参与机体的防御,在炎症的过程、细胞和组织损伤中均起重要作用。B因子的检测方法常用的有单扩散法、火箭电泳法和溶血法,前者灵敏度不高,重复性差;后两者操作较复合^[1,2].因此,寻找一种简单、快速、灵敏且可精确定量的检测方法在临床医学上很重要的价值。压电免疫传感器具有仪器装置简单、灵敏度高、能快速检测、无需标记、可精确定量等优点,已被广泛应用^[3]。聚乙烯亚胺粘附和戊二醛交联法常用于石英晶体电极上抗体的固定^[4]。本文采用这一方法固定B因子抗体,研制了一种新型的传感器,用于B因子的检测,并选用4种解吸剂研究了电极的可重复性。     

一种新的压电免疫传感器中生物分子固定化方法的研究

生物分子固定化或传感界面设计技术是研制压电免疫传感器的关键之一。本文 结合自组装单分子膜（SAMs）和聚电解质静电吸附组装技术，提出了一种新的压电 免疫传感器中生物分子固定化方法，研制成一种检测补体C_3的压电免疫传感器。 先在石英晶振的金电极表面组装一层胱胺SAMs，再在膜上组装带相反电荷的聚苯磺 酸钠（PSS）单层膜，通过静电吸附作用固定抗体（抗原），实现对相应抗原（抗 体）的检测。利用扫描电镜技术，从形态上考察了晶振组装胱氨SAMs与PSS及固定 补体C_3抗体后的表面形貌。研究了抗体的固定化条件，探讨了传感器采用这种固 定化方法的响应与再生性能，并与戊二醛键合固定法进行比较。结果表明，这种固 定化方法不仅对蛋白质类生物分子的固定化具有普适性，而且对所固定的生物分子 的活性影响小，传感器的响应的频移值大，灵敏度高，选择性和再生性能均较好。     

溶胶-凝胶-HBsAb膜免疫传感器的研制与应用

采用溶胶-凝胶(Sol-gel)技术,成功地将乙肝表面抗体(HBsAb)包埋于Sol-gel中,再滴涂于铂盘电极表面,制成溶胶-凝胶-HBsAb膜非标记免疫传感器.根据抗原与抗体特异性结合形成的免疫复合物使敏感膜有效扩散截面积减小的特性,提出了利用铁氰化钾作为氧化还原探针间接检测乙肝表面抗原(HBsAg)的新方法.用循环伏安法(CV)对电极逐层修饰过程进行了表征,并探讨了对HBsAg定量检测的可行性及其响应机理.采用差示脉冲伏安法(DPV)检测人体血清中的HBsAg.线性范围5～320μg/L,线性相关系数r=0.997.该传感器响应迅速,灵敏度高,稳定性好.于4℃干态保存14d,其响应信号基本不变.将其用于108例临床血清检验,与酶联免疫吸附法(ELISA)的符合率为87.5％.     

Ultrasensitive potentiometric immunosensor based on SA and OCA techniques for immobilization of HBsAb with colloidal Au and polyvinyl butyral as matrixes

A novel potentiometric immunosensor for detection of hepatitis B surface antigen (HBsAg) has been developed by means of self-assembly (SA) and opposite-charged adsorption (OCA) techniques to immobilize hepatitis B surface antibody (HBsAb) on a platinum electrode. A cleaned platinum electrode was first pretreated in the presence of 10% HNO3 and 2.5% K2CrO4 solution and held at -1.5 V (vs SCE) for 1 min to make it negatively charged and then immersed in a mixing solution containing hepatitis B surface antibody, colloidal gold (Au), and polyvinyl butyral (PVB). Finally, HBsAb was successfully immobilized onto the surface of the negatively charged platinum electrode modified nanosized gold and PVB sol-gel matrixes. The modified procedure was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The immobilized hepatitis B surface antibody exhibited direct electrochemical behavior toward hepatitis B surface antigen (HBsAg). The performance and factors influencing the performance of the resulting immunosensor were studied in detail. More than 95.7% of the results of the human serum samples obtained by this method were in agreement with those obtained by enzyme-linked immunosorbent assays (ELISAs). The resulting immunosensor exhibited fast potentiometric response (<3 min) to HBsAg. The detection limit of the immunosensor was 2.3 ng.mL(-1), and the linear range was from 8 to 1280 ng.mL(-1). Moreover, the studied immunosensor exhibited high sensitivity, good reproducibility, and long-term stability (>6 months).     

红细胞标记抗体的化学发光免疫分析

用红细胞代替辣根过氧化物酶作为双抗体夹心免疫分析中第二抗体的标记物, 建立了一种红细胞标记抗体的免疫化学发光测定乙型肝炎病毒表面抗原的新方法. 在免疫反应完成后, 结合了抗原-抗体免疫复合物的致敏红细胞在低渗溶液中溶血, 释放出血红蛋白. 基于血红蛋白对鲁米诺-H2O2体系化学发光具有催化作用的原理, 采用化学发光法测定血红蛋白含量. 测得的血红蛋白发光强度与待测抗原浓度呈线性关系. 采用这种方法可检测出0.5 ng/mL的乙型肝炎病毒表面抗原. 将该方法与酶联免疫吸附分析(ELISA)结合起来对乙型肝炎患者血清乙肝病毒表面抗原(HBsAg)进行检测, 两者符合率均为97%, 表明本法具有良好的灵敏度和特异性, 可用于临床标本测试.     

表面等离子体子共振生物传感器用于乙肝表面抗原的测定

运用自行研制的表面等离子体子共振（SPR）生物传感器，采用自组装成膜技 术并以戊二醛作偶联剂，在传感片表面修饰HBsAg单克隆抗体，将其用于乙肝表面 抗原（HBsAg)的检测。实验结果表明SPR生物传感器对HBsAg的检出限为0.06ng/mL 。与传统的酶联免疫吸附试验（ELISA）相比，SPR生物传感器的检出灵敏度明显高 于ELISA法。用该SPR生物传感器对HBsAg质控血清与纯化的HBsAg溶液进行比较检测 ，结果表明该SPR生物传感器对HBsAg具有好的特异选择性。     

Gold nanoparticle-labeled detection antibodies for use in an enhanced electrochemical immunoassay of hepatitis B surface antigen in human serum

The application of gold nanoparticle-based electrochemical immunoassays have been extensively studied for the detection of hepatitis B surface antigen (HBsAg), but most often they exhibit low sensitivity. We describe the fabrication of a new electrochemical immunoassay for signal amplification of the antigen-antibody reaction combined with the nanogold-based bio-barcode technique. Hepatitis B surface antibody (HBsAb) was initially immobilized on a nanogold/thionine/DNA-modified gold electrode, and then a sandwich-type immunoassay format was employed for the detection of HBsAg using nanogold-codified horseradish peroxidase-HBsAb conjugates as secondary antibodies. Under optimal conditions, the current response of the sandwich-type immunocomplex relative to the H₂O₂ system was proportional to HBsAg concentration in the range from 0.5 to 650 ng·mL^?1 with a detection limit of 0.1 ng·mL^?1 (S/N?=?3). The precision, reproducibility and stability of the immunosensor were acceptable. Subsequently, the immunosensors were used to assay HBsAg in human serum specimens. Analytical results were in agreement with those obtained by the standard chemiluminescence enzyme-linked immunosorbent assay.     

超支化聚合物作为放大信号的纳米磁性微球电化学免疫分析法

提出了一种基于超支化聚合物(HBP)固化酶标二抗作为放大信号和纳米磁球相结合的超灵敏的免疫分析新方法。首先羧基纳米磁性微球共价键合乙肝抗体(HBsAb)形成免疫磁性微球,然后与待测乙肝表面抗原(HBsAg)发生特异性结合,加入HBP标记的酶标二抗(HBPS)与结合的抗原结合发生夹心反应。在外加磁场的作用下,抗体抗原免疫复合物易从样品溶液中分离,在含有邻氨基苯酚和H2O2的底液中,快速生成具有电活性的化合物3-氨基吩呃嗪,用示差脉冲伏安法(DPV)测定响应电流,电流强度(I)与乙肝表面抗原浓度(c)在0.05～10.0μg/L范围内呈线性关系,线性回归方程为I(μA)=0.140+16.80 c(μg/L),相关系数r=0.9995,检出限达0.008μg/L,并用于实际样品的测定。     

A novel amperometric immunosensor based on three-dimensional sol-gel network and nanoparticle self-assemble technique

A novel hepatitis B surface antigen (HBsAg) immunosensor has been developed by self-assembling gold nanoparticles to a thiol-containing sol-gel network. A cleaned gold electrode was first immersed in a hydrolyzed mercaptopropyltrimethoxysilane (MPS) sol-gel solution to assemble three-dimensional silica gel, and then gold nanoparticles were chemisorbed onto the thiol groups of the sol-gel network. Finally, hepatitis B surface antibody (HBsAb) was adsorbed onto the surface of the gold nanoparticles. Thus, an interfacial design of bare gold electrode (BGE)/MPS/Au/HBsAb was prepared to detect HBsAg in human serum based on the specific reaction of HBsAb and HBsAg. The electrochemistry of ferricyanide redox reaction was used as a marker to probe the interface and as a redox probe to determinate HBsAg. The main conditions of the assembly of MPS sol-gel, gold nanoparticles, the immobilization of HBsAb, and incubation time were investigated in detail. Compared with the glutaraldehyde binding approach, the antibodies immobilized by this method present larger amount and higher immunoactivity. The linearity of HBsAg in the range of 2-360 ng/mL with the correlation coefficient of 0.998 was obtained. This immunosensor system was evaluated on several clinical sample, the analytical results obtained by this method were in agreement with those detected by the enzyme-linked immunosorbent assay (ELISA) method, indicating a promising alternative tool for clinical diagnosis. Moreover, the studied immunosensor exhibited good reproducibility, long-term stability, high sensitivity and specificity.     

A novel mimetic enzymatic fluorescence immunoassay for hepatitis B surface antigen by using a thermal phase separating polymer

Iron tetrasulfonatophthalocyanine (FeTSPc), a peroxidase mimic, was used as a labeling reagent and poly(N-isopropylacrylamide) (PNIP) as the separation support of the immune complex for the mimetic-enzymatic immunoassay of hepatitis B surface antigen (HBsAg). PNIP was precipitated from aqueous solution when the ambient temperature was higher than its lower critical solution temperature of 31 degrees C. In a sandwich immunoassay, the antigen (HBsAg) first reacted with mouse anti-human HBsAg antibody immobilized on PNIP (PNIP-antibody) and then further reacted with FeTSPc-labeled mouse anti-HBsAg antibody (antibody-FeTSPc) at room temperature in a homogeneous format. After changing the temperature to separate the PNIP-antibody-HBsAg-antibody-FeTSPc conjugate moiety, it was re-dissolved and determined by coupling with the fluorogenic reaction of hydrogen peroxide and p-hydroxyphenylpropionic acid. The sensitivity of this method (3 ng mL-1) was close to that of the traditional ELISA using the same reactants. However, the assay was much faster (the assay time decreased from 100-120 to 45 min). This method was applied to determine HBsAg in human serum with satisfactory results.     

Potentiometric Immunosensor Based on Immobilization of Hepatitis B Surface Antibody on Platinum Electrode Modified Silver Colloids and Polyvinyl Butyral as Matrixes

A highly sensitive immunosensor based on immobilization of hepatitis B surface antibody (HBsAb) on platinum electrode (Pt) modified silver colloids and polyvinyl butyral (PVB) as matrixes has been developed for potentiometric immunoanalysis to detect hepatitis B surface antigen (HBsAg) in this study. HBsAb molecules were immobilized successfully on nanometer‐sized silver colloid particles associated with polyvinyl butyral on a platinum electrode surface. The modification procedure was electrochemically monitored by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The HBsAb‐silver‐PVB‐modified electrode exhibited direct electrochemical behavior toward HBsAg. The factors influencing the performance of the resulting immunosensor were studied in detail. More than 94.7% of the results of human serum samples obtained by this method were in agreement with those obtained by enzyme‐linked immunosorbent assays (ELISAs). The resulting immunosensor exhibited a sigmoid curve with log HBsAg concentration, high sensitivity (39.8 mV/decade), wide linear range from 16.0 to 800 ng mL^?1 with a detection limit of 3.6 ng mL^?1, fast potentiometric response (<3 min) and long‐term stability (>4 months). The response mechanism of the immunosensors was also studied with AC impedance techniques.     

Electrochemical immunoassay of hepatitis B surface antigen by the amplification of gold nanoparticles based on the nanoporous gold electrode

We describe herein the combination of electrochemical immunoassay using nanoporous gold (NPG) electrode with horseradish peroxidase (HRP) labeled secondary antibody-gold nanoparticles (AuNPs) bioconjugates for highly sensitive detection of protein in serum. The electroactive product of o-phenylenediamine (OPD) oxidized with H₂O₂ catalyzed by HRP was reduced in the Britton-Robinson (BR) buffer and the peak current of which was used to determine the concentration of antigen (Ag) in the analyte. The active surface area of NPG electrode was larger than that of a bare flat one. The presence of AuNPs enhanced the immobilized amount of HRP labeled antibody (Ab), which improved the sensitivity of the immunoassay when used as the secondary antibodies. As a result of these two combined effects, the sensitivity of the immunoassay for the determination of target protein was increased significantly. Using hepatitis B surface antigen (HBsAg) as a model, we demonstrate a dose response in the range of 0.01-1.0 ng/mL with a detection limit of 2.3 pg/mL. Analytical results of several human serum samples obtained using the developing technique are in satisfactory agreement with those given by enzyme-linked immune-absorbent assays (ELISA). In addition, the technique was about 100 times more sensitive in the detection of HBsAg than ELISA. All these demonstrated the feasibility of the present immunoassay method for clinical diagnosis.