The rheology of polymeric liquid crystals

The molecular theory of Doi has been used as a framework to characterize the rheological behavior of polymeric liquid crystals at the low deformation rates for which it was derived, and an appropriate extension for high deformation rates is presented. The essential physics behind the Doi formulation has, however, been retained in its entirety. The resulting four-parameter equation enables prediction of the shearing behavior at low and high deformation rates, of the stress in extensional flows, of the isotropic-anisotropic phase transition and of the molecular orientation. Extensional data over nearly three decades of elongation rate (10^–2–10¹) and shearing data over six decades of shear rate (10^–2–10⁴) have been correlated using this analysis. Experimental data are presented for both homogeneous and inhomogeneous shearing stress fields. For the latter, a 20-fold range of capillary tube diameters has been employed and no effects of system geometry or the inhomogeneity of the flow-field are observed. Such an independence of the rheological properties from these effects does not occur for low molecular weight liquid crystals and this is, perhaps, the first time this has been reported for polymeric lyotropic liquid crystals; the physical basis for this major difference is discussed briefly. A Semi-empirical constant in eq. (18), N/m² - c rod concentration, rods/m³ - c ^* critical rod concentration at which the isotropic phase becomes unstable, rods/m³ - C interaction potential in the Doi theory defined in eq. (3) - d rod diameter, m - D semi-empirical constant in eq. (19), s^–1 - D _r lumped rotational diffusivity defined in eq. (4), s^–1 - rotational diffusivity of rods in a concentrated (liquid crystalline) system, s^–1 - D _ro rotational diffusivity of a dilute solution of rods, s^–1 - f distribution function defining rod orientation - F tensorial term in the Doi theory defined in eq. (7) (or eq. (19)), s^–1 - G tensorial term in the Doi theory defined in eq. (8) - K _B Boltzmann constant, 1.38 × 10^–23 J/K-molecule - L rod length, m - S scalar order parameter - S tensor order parameter defined in eq. (5) - t time, s - T absolute temperature, K - u unit vector describing the orientation of an individual rod - rate of change ofu due to macroscopic flow, s^–1 - v fluid velocity vector, m/s - v velocity gradient tensor defined in eq. (9), s^–1 - V mean field (aligning) potential defined in eq. (2) - x coordinate direction, m - Kronecker delta (= 0 if = 1 if = ) - _r ratio of viscosity of suspension to that of the solvent at the same shear stress - _s solvent viscosity, Pa · s - ^* viscosity at the critical concentrationc ^*, Pa · s - v ₁, v₂ numerical factors in eqs. (3) and (4), respectively - deviatoric stress tensor, N/m² - volume fraction of rods - ⁰ constant in eq. (16) - ^* volume fraction of rods at the critical concentrationc ^* - average over the distribution functionf(u, t) (= d ²u f(u, t)) - gradient operator - d ²u integral over the surface of the sphere (|u| = 1)     

Transport in ordered and disordered porous media III: Closure and comparison between theory and experiment

In this paper we examine the closure problem associated with the volume averaged form of the Stokes equations presented in Part II. For both ordered and disordered porous media, we make use of a spatially periodic model of a porous medium. Under these circumstances the closure problem, in terms of theclosure variables, is independent of the weighting functions used in the spatial smoothing process. Comparison between theory and experiment suggests that the geometrical characteristics of the unit cell dominate the calculated value of the Darcy's law permeability tensor, whereas the periodic conditions required for thelocal form of the closure problem play only a minor role.Roman Letters A interfacial area of the- interface contained within the macroscopic region, m² - A _e area of entrances and exits for the-phase contained within the macroscopic system, m² - A interfacial area of the- interface associated with the local closure problem, m² - A _p surface area of a particle, m² - b vector used to represent the pressure deviation, m^–1 - B ⁰ B+I, a second order tensor that maps v _m ontov - B second-order tensor used to represent the velocity deviation - d _p 6V _p/A_p, effective particle diameter, m - d a vector related to the pressure, m - D a second-order tensor related to the velocity, m² - g gravity vector, m/s² - I unit tensor - K traditional Darcy's law permeability tensor calculated on the basis of a spatially periodic model, m² - K _m permeability tensor for the weighted average form of Darcy's law, m² - L general characteristic length for volume averaged quantities, m - L _p characteristic length for the volume averaged pressure, m - L characteristic length for the porosity, m - L _v characteristic length for the volume averaged velocity, m - characteristic length (pore scale) for the-phase - _i i=1, 2, 3 lattice vectors, m - weighting function - m(-y) , convolution product weighting function - m _v special convolution product weighting function associated with the traditional averaging volume - m _g general convolution product weighting function - m _V unit cell convolution product weighting function - m _C special convolution product weighting function for ordered media which produces the cellular average - n unit normal vector pointing from the-phase toward the -phase - p pressure in the-phase, N/m² - p _m superficial weighted average pressure, N/m² - p _m intrinsic weighted average pressure, N/m² - p traditional intrinsic volume averaged pressure, N/m² - p – p _m , spatial deviation pressure, N/m² - r ₀ radius of a spherical averaging volume, m - r _m support of the convolution product weighting function - r position vector, m - r position vector locating points in the-phase, m. - V averaging volume, m³ - B volume of the-phase contained in the averaging volume, m³ - V _cell volume of a unit cell, m³ - v velocity vector in the-phase, m/s - v _m superficial weighted average velocity, m/s - v _m intrinsic weighted average velocity, m/s - v traditional superficial volume averaged velocity, m/s - v – v _m , spatial deviation velocity, m/s - x position vector locating the centroid of the averaging volume or the convolution product weighting function, m - y position vector relative to the centroid, m - y position vector locating points in the -phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V /V, volume average porosity - _m m * , weighted average porosity - mass density of the-phase, kg/m³ - viscosity of the-phase, Ns/m²     

Experimental investigation of the creeping motion of a drop in a vertical tube

New experimental data regarding the motion of a drop along the axis of a vertical tube, filled with another highly viscous liquid, are obtained. The experiments are realised with sufficiently large drops for an internal circulation to develop and also for different pairs of fluids; the preponderant role of the gravity on the drop shape and consequently on its terminal velocity is pointed out. Moreover, by means of a visualization technique, details on the flow both inside and outside the drop are given.List of symbols g gravity acceleration - r distance from the drop center - R equivalent radius of the drop, i.e. the radius of the sphere having the same volume as the drop - R _EQ radius of the equatorial section of the drop - R _T tube radius - L _AX half length of the drop - U ₀ terminal velocity of the drop - P _s Poiseuille number= U _{0 e} /4 g R ² - Fr Fronde number = U ₀ ² _e /2 g R - Re Reynolds number = 2 U ₀ R _e / _e - E _o Eötvös number = 4g R ²/ - deformation parameter = _e U ₀/ - apparent density of the suspended liquid= | _i – _e | - _i viscosity of the suspended liquid - _e viscosity of the suspending liquid - drop-to-tube radius ratio = R/R _T - _EQ equatorial drop-to-tube radius ratio = R EQ/R _T - interfacial tension     

Helical flow of molten polymers in a cylindrical annulus

Summary The paper is concerned with an analytical investigation of helical flow of a non-Newtonian fluid through an annulus with a rotating inner cylinder. The shear dependence of viscosity is described by a power law and the temperature dependence by an exponential function.Velocity and temperature profiles, energy input and shear along the stream lines, pressure drop, and torque are presented for the range of input parameters encountered in polymer extrusion.The results of the study can be applied to a mixing element in a screw extruder and for a device to control extrudate temperature and output.Nomenclature a thermal diffusivity [m²/s] - b temperature coefficient [K^–1], see eq. [4] - c heat capacity [J/kg K] - h slot width [m] - I ₁,I ₂,I ₃ invariants of the rate of deformation tensor, see eq. [5] - k thermal conductivity [J/m s K] - l, L = 1/h length of the slot - l _T ,l _K thermal and kinematic entrance length - m power law exponent, see eq. [3] - M torque [m N] - p pressure [N/m²] - P dimensionless pressure gradient, see eq. [24] - P _R,P _RZ dimensionless components of the shear stress tensor, see eq. [25] and eq. [26] - r, R = r/r _wa radial coordinate - r _wa, r_wi outer and inner radius of annulus [m] - t time [s]; dwell time in the annulus - T temperature [K] - v , v_r, V_z velocity components [m/s] - v ₀ angular velocity at inner wall [m/s] - average velocity inz-direction [m/s] - V , V_R, V_Z dimensionless velocity components,v /v₀, v_r/v₀, v_z/v₀ - V _z velocity ratio, helical parameter - Y coordinate inr-direction, see eq. [20] - z, Z = z/h Pe axial coordinate - deformation - rate of deformation tensor [s^–1] - apparent viscosity [N s/m²], see eq. [3] - dimensionless temperature,b (T – T ₀) - azimuth coordinate - ratio of radii,r _wi/r_wa - density [kg/m³] - , kl shear stress tensor [N/m²] - fluidity [m²w/Nw s], see eq. [4] - Gf Griffith number, see eq. [12] - Pe Péclet number, see eq. [13] - Re Reynolds number, - 0 initial state, reference state - equilibrium state - e entrance - wi, wa at surface of inner or outer wall - r, R, z, Z, coordinates - i, j radial and axial position of nodal point in the grid - k, l tensor components Presented at Euromech 37, Napoli 6. 20–23. 1972.With 15 figuresDedicated to Prof. Dr.-Ing. G. Schenkel on his 60th birthday     

Flow in porous media I: A theoretical derivation of Darcy's law

Stokes flow through a rigid porous medium is analyzed in terms of the method of volume averaging. The traditional averaging procedure leads to an equation of motion and a continuity equation expressed in terms of the volume-averaged pressure and velocity. The equation of motion contains integrals involving spatial deviations of the pressure and velocity, the Brinkman correction, and other lower-order terms. The analysis clearly indicates why the Brinkman correction should not be used to accommodate ano slip condition at an interface between a porous medium and a bounding solid surface.The presence of spatial deviations of the pressure and velocity in the volume-averaged equations of motion gives rise to aclosure problem, and representations for the spatial deviations are derived that lead to Darcy's law. The theoretical development is not restricted to either homogeneous or spatially periodic porous media; however, the problem ofabrupt changes in the structure of a porous medium is not considered.Roman Letters A interfacial area of the - interface contained within the macroscopic system, m² - A _e area of entrances and exits for the -phase contained within the macroscopic system, m² - A interfacial area of the - interface contained within the averaging volume, m² - A ^* interfacial area of the - interface contained within a unit cell, m² - Ae area of entrances and exits for the -phase contained within a unit cell, m² - B second order tensor used to represent the velocity deviation (see Equation (3.30)) - b vector used to represent the pressure deviation (see Equation (3.31)), m^–1 - d distance between two points at which the pressure is measured, m - g gravity vector, m/s² - K Darcy's law permeability tensor, m² - L characteristic length scale for volume averaged quantities, m - characteristic length scale for the -phase (see Figure 2), m - characteristic length scale for the -phase (see Figure 2), m - n unit normal vector pointing from the -phase toward the -phase (n =–n ) - n _e unit normal vector for the entrances and exits of the -phase contained within a unit cell - p pressure in the -phase, N/m² - p intrinsic phase average pressure for the -phase, N/m² - p –p , spatial deviation of the pressure in the -phase, N/m² - r ₀ radius of the averaging volume and radius of a capillary tube, m - v velocity vector for the -phase, m/s - v phase average velocity vector for the -phase, m/s - v intrinsic phase average velocity vector for the -phase, m/s - v –v , spatial deviation of the velocity vector for the -phase, m/s - V averaging volume, m³ - V volume of the -phase contained within the averaging volume, m³ Greek Letters V/V, volume fraction of the -phase - mass density of the -phase, kg/m³ - viscosity of the -phase, Nt/m² - arbitrary function used in the representation of the velocity deviation (see Equations (3.11) and (B1)), m/s - arbitrary function used in the representation of the pressure deviation (see Equations (3.12) and (B2)), s^–1     

Transport in ordered and disordered porous media IV: Computer generated porous media for three-dimensional systems

In the method of volume averaging, the difference between ordered and disordered porous media appears at two distinct points in the analysis, i.e. in the process of spatial smoothing and in the closure problem. In theclosure problem, the use of spatially periodic boundary conditions isconsistent with ordered porous media and the fields under consideration when the length-scale constraint,r ₀L is satisfied. For disordered porous media, spatially periodic boundary conditions are an approximation in need of further study.In theprocess of spatial smoothing, average quantities must be removed from area and volume integrals in order to extractlocal transport equations fromnonlocal equations. This leads to a series of geometrical integrals that need to be evaluated. In Part II we indicated that these integrals were constants for ordered porous media provided that the weighting function used in the averaging process contained thecellular average. We also indicated that these integrals were constrained by certain order of magnitude estimates for disordered porous media. In this paper we verify these characteristics of the geometrical integrals, and we examine their values for pseudo-periodic and uniformly random systems through the use of computer generated porous media.

Nomenclature

Roman Letters A interfacial area of the- interface associated with the local closure problem, m² - A _e area of entrances and exits for the-phase contained within the averaging system, m² - a _i i=1, 2, 3 gaussian probability distribution used to locate the position of particles - I unit tensor - L general characteristic length for volume averaged quantities, m - L characteristic length for , m - L characteristic length for , m - characteristic length for the -phase particles, m - ⁰ reference characteristic length for the-phase particles, m - characteristic length for the-phase, m - _i i=1, 2, 3 lattice vectors, m - m convolution product weighting function - m _v special convolution product weighting function associated with the traditional volume average - n _i i=1, 2, 3 integers used to locate the position of particles - n unit normal vector pointing from the-phase toward the-phase - n _e outwardly directed unit normal vector at the entrances and exits of the-phase - r _p position vector locating the centroid of a particle, m - r gaussian probability distribution used to determine the size of a particle, m - r ₀ characteristic length of an averaging region, m - r position vector, m - r _m support of the weighting functionm, m - averaging volume, m³ - V volume of the-phase contained in the averaging volume,, m³ - x positional vector locating the centroid of an averaging volume, m - x ₀ reference position vector associated with the centroid of an averaging volume, m - y position vector locating points relative to the centroid, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V /V, volume average porosity - /L, small parameter in the method of spatial homogenization - standard deviation ofa _i - _r standard deviation ofr - _r intrinsic phase average of      

Non-isothermal flow of polymer melts in a curved tube

The results of a numerical study (using finite differences) of heat transfer in polymer melt flow is presented. The rheological behaviour of the melt is described by a temperature-dependent power-law model. The curved tube wall is assumed to be at constant temperature. Convective and viscous dissipation terms are included in the energy equation. Velocity, temperature and viscosity profiles, Nusselt numbers, bulk temperatures, etc. are presented for a variety of flow conditions. Br — Brinkman number - c specific heat, J/kg K - De — Dean number - E dimensionless apparent viscosity, eq. (14d) - G dimensionless shear rate, eq. (19) - k parameter of the power-law model, °C^–1, eq. (7) - mass flow rate, kg/s - m ₀ parameter of the power-law model, Pa · s ⁿ , eq. (7) - n parameter of the power-law model, eq. (7) - Nu 2r _p/ — Nusselt number, eqs. (28,31) - p pressure, Pa - Pe — Péclet number - P —(p/)/r _c — pressure gradient, Pa/m - dissipated energy, W, eq. (29) - total energy, W, eq. (30) - r radial coordinate, m - r _c radius of tube-curvature, m, fig. 1 - r _p radius of tube, m, fig. 1 - r _t variable, m, eq. (6) - R dimensionless radial coordinate, eq. (14a) - R _c dimensionlessr _c, eq. (14a) - R _t dimensionlessr _t, eq. (14a) - t temperature, °C - bulk temperature, °C, eq. (27) - t ₀ inlet temperature of the melt, °C - t _w tube wall temperature, °C - T dimensionless temperature, eq. (14c) - T _w dimensionless tube wall temperature - T dimensionless bulk temperature - u ₁ variable, s^–1, eq. (4) - u ₂ variable, s^–1, eq. (5) - U ₁ dimensionlessu ₁, eq. (18) - U ₂ dimensionlessu ₂, eq. (18) - v velocity in-direction, m/s - average velocity of the melt, m/s - V dimensionlessv, eq. (14b) - dimensionless , eq. (15) - z r _c — centre length of the tube, m - Z dimensionlessz, eq. (14e) - heat transfer coefficient, W/m² K - shear rate, s^–1, eq. (8) - — shear rate, s^–1 - apparent viscosity, Pa · s, eq. (7) - ₀ — apparent viscosity, Pa · s - angular coordinate, rad, fig. 1 - thermal conductivity, W/m K - melt density, kg/m³ - axial coordinate, rad, fig. 1 - rate of strain tensor, s^–1, eq. (8) - (—p) pressure drop, Pa     

Flow in porous media III: Deformable media

Stokes flow in a deformable medium is considered in terms of an isotropic, linearly elastic solid matrix. The analysis is restricted to steady forms of the momentum equations and small deformation of the solid phase. Darcy's law can be used to determine the motion of the fluid phase; however, the determination of the Darcy's law permeability tensor represents part of the closure problem in which the position of the fluid-solid interface must be determined.Roman Letters A interfacial area of the- interface contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A _e area of entrances and exits for the-phase contained within the macroscopic system, m² - A ^* interfacial area of the- interface contained within a unit cell, m² - A _e ^* area of entrances and exits for the-phase contained within a unit cell, m² - E Young's modulus for the-phase, N/m² - e i unit base vectors (i = 1, 2, 3) - g gravity vector, m²/s - H height of elastic, porous bed, m - k unit base vector (=e ₃) - characteristic length scale for the-phase, m - L characteristic length scale for volume-averaged quantities, m - n unit normal vector pointing from the-phase toward the-phase (n = -n ) - p pressure in the-phase, N/m² - P p – g·r, N/m² - r ₀ radius of the averaging volume, m - r position vector, m - t time, s - T total stress tensor in the-phase, N/m² - T ⁰ hydrostatic stress tensor for the-phase, N/m² - u displacement vector for the-phase, m - V averaging volume, m₃ - V volume of the-phase contained within the averaging volume, m³ - v velocity vector for the-phase, m/s Greek Letters V /V, volume fraction of the-phase - mass density of the-phase, kg/m³ - shear coefficient of viscosity for the-phase, Nt/m² - first Lamé coefficient for the-phase, N/m² - second Lamé coefficient for the-phase, N/m² - bulk coefficient of viscosity for the-phase, Nt/m² - T –T ⁰ , a deviatoric stress tensor for the-phase, N/m²     

Flow birefringence of polymer melts: Application to the investigation of time dependent rheological properties

Summary Transient stresses including normal stresses, which are developed in a polymer melt by a suddenly imposed constant rate of shear, are investigated by mechanical measurement and, indirectly, with the aid of the flow birefringence technique. For the latter purpose use is made of the so-called stress-optical law, which is carefully checked.It appears that the essentially linear model of the rubberlike liquid, as proposed byLodge, is capable of describing the behaviour of polymer melts rather well, if the applied total shear does not exceed unity. In order to describe also steady state values of the stresses successfully, one should extend measurements to extremely low shear rates.These statements are verified with the aid of a method which was originally designed bySchwarzl andStruik for the practical calculation of interrelations between linear viscoelastic functions. In the present paper dynamic shear moduli are used as reference functions.

---

Zusammenfassung Mit der Zeit anwachsende Spannungen, darunter auch Normalspannungen, wie sie sich nach dem plötzlichen Anlegen einer konstanten Schergeschwindigkeit in einer Polymerschmelze entwickeln, werden mit Hilfe mechanischer Messungen und indirekt mit Hilfe der Strömungsdoppelbrechung untersucht. Für den letzteren Zweck wird das sogenannte spannungsoptische Gesetz herangezogen, dessen Gültigkeit sorgfältig überprüft wird.Es ergibt sich, daß das im Wesen lineare Modell der gummiartigen Flüssigkeit, wie es vonLodge vorgeschlagen wurde, sich recht gut zur Beschreibung des Verhaltens von Polymerschmelzen eignet, solange der im ganzen angelegte Schub den Wert Eins nicht überschreitet. Um auch stationäre Werte der Spannungen in die Beschreibung erfolgreich einzubeziehen, sollte man die Messungen bis zu extrem niedrigen Schergeschwindigkeiten ausdehnen.Die gemachten Feststellungen werden mit Hilfe einer Methode verifiziert, die vonSchwarzl undStruik ursprünglich für die praktische Berechnung von Beziehungen zwischen Zustandsfunktionen entwickelt wurde, die dem linear viskoelastischen Verhalten entsprechen. In der vorliegenden Veröffentlichung dienen die dynamischen Schubmoduln als Bezugsfunktionen.

---

a _T shift factor - B _ij Finger deformation tensor - C stress-optical coefficient, (m²/N) - f (p _jl ) undetermined scalar function - G shear modulus, (N/m²) - G(t) time dependent shear modulus, (N/m²) - G() shear storage modulus, (N/m²) - G() shear loss modulus, (N/m²) - G _r reduced shear storage modulus, (N/m²) - G _r reduced shear loss modulus, (N/m²) - H() shear relaxation time spectrum, (N/m²) - k Boltzmann constant, (Nm/°K) - n _ik refractive index tensor - p undetermined hydrostatic pressure, (N/m²) - p _ij ,p _ik stress tensor, (N/m²) - p ₂₁ shear stress, (N/m²) - p ₁₁ –p ₂₂ first normal stress difference, (N/m²) - p ₂₂ –p ₃₃ second normal stress difference, (N/m²) - q shear rate, (s^–1) - t, t time, (s) - T absolute temperature, (°K) - T ₀ reference temperature, (°K) - x the ratiot/ - x position vector of a material point after deformation, (m) - x position vector of a material point before deformation, (m) - ₀, ₁ constants in eq. [37] - ₀, ₁ constants in eq. [37] - shear deformation - (t, t) time dependent shear deformation - _ij unity tensor - n flow birefringence in the 1–2 plane - (q) non-Newtonian shear viscosity, (N s/m²) - ^* () complex dynamic viscosity, (N s/m²) - | ^* ()| absolute value of complex dynamic viscosity, (N s/m²) - () real part of complex dynamic viscosity, (N s/m²) - () imaginary part of complex dynamic viscosity, (N s/m²) - (t — t) memory function, (N/m² · s) - v number of effective chains per unit of volume, (m^–3) - temperature dependent density, (kg/m³) - ₀ density at reference temperatureT ₀, (kg/m³) - relaxation time, (s) - integration variable, (s) - (x) approximate intensity function - ₁ (x) error function - extinction angle - _m orientation angle of the stress ellipsoid - circular frequency, (s^–1) - 1 direction of flow - 2 direction of the velocity gradient - 3 indifferent direction - t time dependence The present investigation has been carried out under the auspices of the Netherlands Organization for the Advancement of Pure Research (Z. W. O.).North Atlantic Treaty Organization Science Post Doctoral Fellow.Research Fellow, Delft University of Technology.With 11 figures and 2 tables     

Viscosity of suspensions modeled with a shear-dependent maximum packing fraction

A large amount of data from the literature on viscosity of concentrated suspensions of rigid spherical particles are analyzed to support the new concept that the maximum packing fraction ( _M ) is shear-dependent. Incorporation of this behavior in a rheological model for viscosity () as a function of particle volume fraction () succeeds in describing virtually all non-Newtonian effects over the entire concentration range and also accounts for a yield stress. The most successful model is one proposed by Krieger and Dougherty for Newtonian viscosities, (, _M ), but with _M varying from a low-shear limit _M0 to a high-shear limit _M. Microstructural interpretations of this behavior are advanced, with arguments suggesting that similar rheological models should apply to suspensions of nonspherical and irregular particles.Symbols a particle size scale (for spheres, the diameter) - A lumped kinetic parameter in eqs. (23) and (24) - BS butadiene-styrene - C coefficient in Arrhenius model, eq. (2) - D coefficient in Mooney model, eq. (3) - e _i parameter representing one of the three electroviscous effects (i = 1, 2, or 3) - f fraction of total particulates that exist in the dispersed phase, eq. (22) - h solution factor, in Arrhenius model, eq. (2) - k crowding factor, in Mooney model, eq. (3) - k _D ,k _F kinetic rate coefficient for producing particles of dispersed or flocculated type, respectively - K Einstein coefficient for particles of any shape, eq. (1); equal to [] - KD Krieger-Dougherty model, eq. (6) - m exponent to characterize shear-dependence in viscosity models of Cross, eq. (10), and eq. (23), and also in yield stress prediction eq. (24) - N number of monodisperse components in a blend of spheres with different diameters - PD polydispersity (in size) parameter - S generalized shape parameter - T temperature - V _c volume of chamber in figure 6, representing the entire volume of the sample - V _P total volume of particles in the sample - V _D ,V _F sample volumes in which dispersed particles or flocculated particles, respectively, prevail; volumes of the dispersed phase or flocculated phase, containing both particles and carrier fluid - V _PD ,V _PF particle volume within the phase volumeV _D orV _F , respectively Greek coefficient in definition of _c in eq. (8); of order unity - coefficient regulating -sensitivity in eq. (10) - shear rate,dv ₁/dx ₂ in simple shear - shear viscosity of the suspension - ₀, low-shear and high-shear limiting values of - _s viscosity of the suspending fluid - [] intrinsic viscosity, - _r reduced viscosity,/ _s - Boltzmann's constant; in _c - shear stress - _c parameter characterizing sensitivity of viscosity to stress, in eq. (8) - _B dynamic yield stress in the floc model - _y yield stress - volume fraction occupied by solids in a suspension - _M maximum value of attainable by a given collection of particles under given conditions of flow - _M0, _M limiting values of _M at the low- and high- conditions, respectively     

Viscoelastic swirling flow with free surface in cylindrical chambers

The flow of a viscoelastic liquid driven by the steadily rotating bottom cover of a cylindrical cup is investigated. The flow field and the shape of the free surface are determined at the lowest significant orders of the regular domain perturbation in terms of the angular velocity of the bottom cap. The meridional field superposed on a primary azimuthal field shows a structure of multiple cells. The velocity field and the shape of the free surface are strongly effected by the cylinder aspect ratio and the elasticity of the liquid. The use of this flow configuration as a free surface rheometer to determine the first two Rivlin-Ericksen constants is shown to be promising.Nomenclature R, ,Z Coordinates in the physical domain D - , , Coordinates in the rest stateD ₀ - r, ,z Dimensionless coordinates in the rest stateD ₀ - Angular velocity - Zero shear viscosity - Surface tension coefficient - Density - Dimensionless surface tension parameter - ₁, ₂ The first two Rivlin-Ericksen constants - Stream function - Dimensionless second order meridional stream function - ^* Dimensionless second normal stress function - 2 Dimensionless sum of the first and second normal stress functions - N ₁,N ₂ The first and second normal stress functions - n Unit normal vector - D Stretching tensor - A _n nth order Rivlin-Ericksen tensor - S Extra-stress - u Velocity field - U Dimensionless second order meridional velocity field - V Dimensionless first order azimuthal velocity field - p Pressure - Modified pressure field - P Dimensionless second order pressure field - J Mean curvature - a Cylinder radius - d Liquid depth at rest - D Dimensionless liquid depth at rest - h Free surface height - H Dimensionless free surface height at the second order     

Pulsatile flow in a tube with wall injection and suction

This paper studies similarity solutions for pulsatile flow in a tube with wall injection and suction. The Navier-Stokes equations are reduced to a system of three ordinary differential equations. Two of the equations represent the effects of suction and injection on the steady flow while the third represents the effects of suction and injection on pulsatile flow. Since the equations for steady flow have been studied previously, the analysis centers on the third equation. This equation is solved numerically and by the method of matched asymptotic expansions. The exact numerical solutions compare well with the asymptotic solutions.The effects of suction and injection on pulsatile flow are the following: a) Small values of suction can cause a resonance-like effect for low frequency pulsatile flow. b) The annular effect still occurs but for large injection or suction the frequency at which this effect becomes dominant depends on the cross-flow Reynolds number. c) The maximum shear stress at the wall is decreased by injection, but may be increased or decreased by suction.Nomenclature a radius of the tube - a ₀ ² i ² - A₀, B₀, C₀, D₀, E₀ constant coefficients appearing in the expression for pressure - b a non-dimensionalized length - b ₀ ² i ^{2 2} - b _k complex coefficients of a power series - B - C ₁, C ₂, D complex constants - d - D _1,2 - f() F(a ^1/2)/aV - f ₀,f ₁,... functions of order one used in asymptotic expansions of f() - F(r) rv _r - g() - G(r) a steady component of velocity in axial direction - h() 4/C₀ a ² H(a ^1/2) - h ₀,h ₁,h ₂,...;l ₀,l ₁,l ₂,... functions of order one used in asymptotic expansions for h() in outer regions - H(r) complex valued function giving unsteady component of velocity - H ₀, H ₁, H ₂, ... K ₀, K ₁, K ₂, ...; L ₀, L ₁, L ₂, ... functions of order one used in asymptotic expansions for h() in inner regions - i - J ₀, J ₁, Y ₀, Y ₁ Bessel functions of first and second kind - k - K Rk/2b ² - O order symbol - p pressure - p ₁(z, t) arbitrary function related to pressure - r radial coordinate - r ₀ (1+16 ^{4 4})^1/4 - R Va/, the crossflow Reynolds number - t time - u() G(r)/V - v _r radial velocity - v _z axial velocity - V constant velocity at which fluid is injected or extracted - z axial coordinate - ² a ²/4 - 4.196 - small parameter; =–2/R (Sect. 4); =–R/2 (Sect. 5); =2/R(Sect. 6) - r ²/a ² - * 0.262 - Arctan (4 ^{2 2}) - , inner variables - kinematic viscosity - b - * zero of g() - density - (r, t) arbitrary function related to axial velocity - frequency     

The very slow flow of a Powell-Eyring fluid around a sphere

Summary The very slow flow of a Powell-Eyring type non-Newtonian fluid around a sphere is investigated by a variational technique. The result, a correction factor that is applied to the Stokes' equation, is given as a plot and as an equation which is empirically fit to the plot. Also, a comparison of the very slow flows of a simplified viscoelastic Oldroyd fluid and the Powell-Eyring fluid is made which indicates that in a certain restricted region of the very slow flows, both models give essentially the same results. The Oldroyd and Powell-Eyring model parameters are interrelated by forcing both models to fit the same tube flow viscosity data.Nomenclature B dimensionless quantity, v /R - C dimensionless second invariant - c ₁ constant determined by variational method - D dimensionless variational integral - D _2j , D _j+k position-independent variables used in specification of trial functions - E _2j , E _j+k position-independent variables used in specification of trial functions - f friction factor - f _corr friction factor correction - F _drag drag force on sphere - g, g ₀, g ₁ general trial function; first and second terms in the general trial function - G, H terms in the expression for C - j index - J variational integral - k index - K term in the expression for C - p, q integers - r integer, radial coordinate - R radius of sphere - Re Reynolds number - Re ₀ Reynolds number at point of zero shear rate - Re Reynolds number at infinite distance from sphere - Re _NN Reynolds number based on variable part of viscosity - u, v dimensionless position coordinates - V volume considered - v _i ith velocity component - v _r , v , v _z velocity components in the r, , and z-directions - v approach velocity of the fluid - x/ parameter in Powell-Eyring model - x _i i-position coordinate - parameter in Powell-Eyring model - rate of deformation - , _c , _N , ₀ coefficient of viscosity; cross viscosity; parameter in Powell-Eyring model; viscosity in limit of zero shear rate - spherical coordinate - , _ij rate of deformation tensor; ij-component of rate of deformation tensor - ₁, ₂ parameters in Oldroyd model - Newtonian viscosity - ₁, ₂ parameters in Oldroyd model - dimensionless radial coordinate, r/R - second invariant - fluid density - spherical coordinate - stream function     

Correlation of data concerning resistance to flow of generalized Newtonian fluids through granular beds

Summary The paper is concerned with the pressure drop during the flow of rheologically complex fluids through granular beds. An approach is proposed which enables the correlation of the data for any generalized Newtonian fluid. As an example, a detailed derivation of a correlation equation is presented for Carreau fluids. The applicability of the derived equation was proved experimentally in the case of flow of molten poly(ethylene terephthalate) through granular beds.

---

Zusammenfassung Die Arbeit betrifft den Druckverlust bei der Strömung von Flüssigkeiten mit komplexen rheologischen Eigenschaften durch Kornschüttungen. Es wird ein Verfahren vorgeschlagen, das eine Korrelation der Daten für beliebige verallgemeinerte newtonsche Flüssigkeiten ermöglicht. Als Beispiel wird die Ableitung der Korrelationsgleichung für Carreau-Flüssigkeiten ausführlich dargestellt. Die Anwendbarkeit der abgeleiteten Gleichung wird für die Strömung von geschmolzenem Polyäthylenterephthalat durch Kornschüttungen experimentell bestätigt.

---

a _T temperature shift factor - A constant in eq. [1] - b _M molecular weight shift factor - d _p effective particle diameter, m - D capillary diameter, m - f _BK friction factor, defined by eq. [4] - K constant in eq. [22] - K ₀ constant depending on the shape of a conduit cross-section - K ₁ constant in eq. [11] - l bed height, m - l _e average length of the bed channels, m - L length of a conduit, m - M _n number-average molecular weight - M _w weight-average molecular weight - N constant in Carreau model - p pressure drop due to friction, Pa - r _h hydraulic radius, m - T absolute temperature, K - v mean linear velocity, m/s - v _e mean linear velocity in the bed channels, m/s - v ₀ superficial velocity, related to an empty cross-section of the column, m/s - dimensionless factor, defined by eq. [21] - shear rate, s^–1 - nominal shear rate at the wall of a circular pipe, s^–1 - average shear rate at the wall of a noncircular channel, s^–1 - bed porosity - shear dependent viscosity, Pa s - ₀ zero-shear rate viscosity, Pa s - infinite-shear rate viscosity, Pa s - [] intrinsic viscosity - time constant in Carreau model, s - µ Newtonian viscosity, Pa s - fluid density, kg/m³ - _w shear stress at the wall of a circular pipe, Pa - average shear stress at the wall of a noncircular channel, Pa - {Re} general form of Reynolds number in eq. [1] - Re _BK modified Reynolds number for Newtonian fluids, defined by eq. [25] - Re _BK ^* generalized Reynolds number for Carreau fluids, defined by eq. [24] With 5 figures and 2 tables     

A three-parameter model describing the experimental relation between shear stress and shear rate for laminar flow of aqueous polymer solutions

Summary A three-parameter model is introduced to describe the shear rate — shear stress relation for dilute aqueous solutions of polyacrylamide (Separan AP-30) or polyethylenoxide (Polyox WSR-301) in the concentration range 50 wppm – 10,000 wppm. Solutions of both polymers show for a similar rheological behaviour. This behaviour can be described by an equation having three parameters i.e. zero-shear viscosity ₀, infinite-shear viscosity , and yield stress ₀, each depending on the polymer concentration. A good agreement is found between the values calculated with this three-parameter model and the experimental results obtained with a cone-and-plate rheogoniometer and those determined with a capillary-tube rheometer.

---

Zusammenfassung Der Zusammenhang zwischen Schubspannung und Schergeschwindigkeit von strukturviskosen Flüssigkeiten wird durch ein Modell mit drei Parametern beschrieben. Mit verdünnten wäßrigen Polyacrylamid-(Separan AP-30) sowie Polyäthylenoxidlösungen (Polyox WSR-301) wird das Modell experimentell geprüft. Beide Polymerlösungen zeigen im untersuchten Schergeschwindigkeitsbereich von ein ähnliches rheologisches Verhalten. Dieses Verhalten kann mit drei konzentrationsabhängigen Größen, nämlich einer Null-Viskosität ₀, einer Grenz-Viskosität und einer Fließgrenze ₀ beschrieben werden. Die Ergebnisse von Experimenten mit einem Kegel-Platte-Rheogoniometer sowie einem Kapillarviskosimeter sind in guter Übereinstimmung mit den Werten, die mit dem Drei-Parameter-Modell berechnet worden sind.

---

a Pa^–1 physical quantity defined by:a = {1 – ( / ₀)}/ ₀ - c l concentration (wppm) - D m capillary diameter - L m length of capillary tube - P Pa pressure drop - R m radius of capillary tube - u m s^–1 average velocity - v _r m s^–1 local axial velocity at a distancer from the axis of the tube - shear rate (–dv _r /dr) - local shear rate in capillary flow - s^–1 wall shear rate in capillary flow - Pa s dynamic viscosity - _a Pa s apparent viscosity defined by eq. [2] - ( _a ) Pa s apparent viscosity in capillary tube at a distanceR from the axis - ₀ Pa s zero-shear viscosity defined by eq. [4] - Pa s infinite-shear viscosity defined by eq. [5] - l ratior/R - kg m^– density - Pa shear stress - ₀ Pa yield stress - _r Pa local shear stress in capillary flow - _R Pa wall shear stress in capillary flow _R = (PR/2L) - _v m³ s^–1 volume rate of flow With 8 figures and 1 table     

The mirror relations and nonlinear viscoelasticity of polymer melts

An attempt is made to incorporate into a quasilinear viscoelastic constitutive equation of the Boltzmann superposition type the two mirror relations of Gleissle, as well as his relation between the steady-state first normal-stress difference and the shear viscosity curve. It is shown that the three relations can hold separately within this constitutive model, but not simultaneously, because they require a different nonlinear strain measure, namelyS ₁₂ () = – a ( – 1) (a = 0 for 1,a = 1 for 1) for the mirroring of the viscosities,S ₁₂ () = – a (–k ²/) (a = 0 for k, a = 1 for k) for the mirroring of the first normal-stress coefficients, and for the third relation. Here denotes the shear strain and erf the error function. Experimental data on melts of a low-density polyethylene, a high-density polyethylene and a polypropylene show that the mirror relations are passable approximations, but that the third relation meets reality surprisingly close if the right value ofk is used.     

The chaotic response of a fluttering panel: The influence of maneuvering

The influence of maneuvering on the chaotic response of a fluttering buckled plate on an aircraft has been studied. The governing equations, derived using Lagrangian mechanics, include geometric non-linearities associated with the occurrence of tensile stresses, as well as coupling between the angular velocity of the maneuver and the elastic degrees of freedom. Numerical simulation for periodic and chaotic responses are conducted in order to analyze the influence of the pull-up maneuver on the dynamic behavior of the panel. Long-time histories phase-plane plots, and power spectra of the responses are presented. As the maneuver (load factor) increases, the system exhibits complicated dynamic behavior including a direct and inverse cascade of subharmonic bifurcations, intermittency, and chaos. Beside these classical routes of transition from a periodic state to chaos, our calculations suggest amplitude modulation as a possible new mode of transition to chaos. Consequently this research contributes to the understanding of the mechanisms through which the transition between periodic and strange attractors occurs in, dissipative mechanical systems. In the case of a prescribed time dependent maneuver, a remarkable transition between the different types of limit cycles is presented.Nomenclature a plate length - a _r u _r /h - D plate bending stiffness - E modulus of elasticity - g acceleration due to gravity - h plate thickness - j₁,j₂,j₃ base vectors of the body frame of reference - K spring constant - M Mach number - n 1 + ₀/g - N ₁ applied in-plane force - p–p aerodynamic pressure - P pa ⁴/Dh - q ₀/2 - Q _r generalized Lagrangian forces - R rotation matrix - R ₄ N, a ²/D - t time - kinetic energy - u plate deflection - u displacement of the structure - u _r modal amplitude - v₀ velocity - x coordinates in the inertial frame of reference - z coordinates in the body frame of reference - Ka/(Ka+Eh) - - elastic energy - 2qa ³/D - a/_mh - Poisson's ratio - material coordinates - air density - _m plate density - - _r prescribed functions - _r sin(r z/a) - angular velocity - a/v₀ - skew-symmetric matrix form of the angular velocity     

The stokes problems for a conducting fluid with a suspension of particles

The Stokes problems of an incompressible, viscous, conducting fluid with embedded small spherical particles over an infinite plate, set into motion in its plane by impulse and by oscillation, in the presence of a transverse magnetic field, are studied. The velocities of the fluid and of the particles and the wall shear stress are obtained. The stress is found to increase due to the particles and the magnetic field, with the effect of the particles diminishing as the field strength is increased.Nomenclature H ₀ strength of the imposed magnetic field - k density ratio of particles to fluid (per unit volume of flow field) - m _e ² H ₀ ² / - t time - y co-ordinate normal to the plate - u fluid velocity - v particle velocity - _e magnetic permeability of the fluid - kinematic viscosity of the fluid - electric conductivity of the fluid - fluid density - particle relaxation time - frequency of oscillation of the plate     

Asymptotic Nusselt numbers for Newtonian flow through a parallel-plate channel with recycle

General expressions for evaluating the asymptotic Nusselt number for a Newtonian flow through a parallel-plate channel with recycle at the ends have been derived. Numerical results with the ratio of thicknesses as a parameter for various recycle ratios are obtained. A regression analysis shows that the results can be expressed by log Nur^0.83=0.3589 (log)² -0.2925 (log) + 0.3348 forR 3, 0.1 0.9; logNu=0.5982(log)² +0.3755 × 10^–2 (log) +0.8342 forR 10^–2, 0.1 0.9.

---

Asymptotische Nusselt-Zahlen für die Newtonsche Strömung durch einen Kanal aus parallelen Platten mit Rückführung

Zusammenfassung In dieser Untersuchung wurden allgemeine Ausdrücke hergeleitet um die asymptotische Nusselt-Zahl für eine Newtonsche Strömung durch einen Kanal aus parallelen Platten mit Rückführung an den Enden berechnen zu können. Es wurden numerische Ergebnisse mit den Dicken-Verhältnissen, als Parameter für verschiedene Rückführungs-verhältnisse, erhalten. Eine Regressionsanalyse zeigt, daß die Ergebnisse wie folgt ausgedrückt werden können: log Nur^0,83=0,3589 (log)² -0,2925 (log) + 0,3348 fürR 3, 0,1 0,9; logNu=0,5982(log)² +0,3755 × 10^–2 (log) + 0,8342 fürR 10^–2, 0,1 0,9.

---

Nomenclature A₁ shooting value,d(0)/d - A₂ shooting value,d(1)/d - B channel width - Gz Graetz number, U_bW²/L - h _m logarithmic average convective heat transfer coefficient - h _x average local convective heat transfer coefficient - k thermal conductivity - L channel length - Nu average local Nusselt number, 2 h_xW/k - Nu _m logarithmic average Nusselt number, 2h_mW/k - R recycle ratio, reverse volume flow rate divided by input volume flow rate - T temperature of fluid - T _m bulk temperature, Eq. (8) - T ₀ temperature of feed stream - T _s wall temperature - U velocity distribution - U _b reference velocity,V/BW - V input volume flow rate - v dimensionless velocity distribution, U/U_b - W channel thickness - x longitudinal coordinate - y transversal coordinate - Z₁-z₆ functions defined in Eq. (A1) - thermal diffusivity - least squares error, Eq. (A7) - weight, Eqs. (A8), (A9) - dimensionless coordinate,y/W - dimensionless coordinate,x/GzL - function, Eq. (7)     

Hydrodynamical changes due to polymer migration in very dilute solutions

The slip hypothesis, based on thermodynamical arguments, has been extended to obtain the flow characteristics of polymer solutions flowing in a nonhomogeneous flow field. An asymptotic analysis, valid for both channel and falling film flows, is presented that predicts the flow enhancement due to polymer migration. Concentration-viscosity coupling is shown to be a critical factor in the hydrodynamic analysis. The analysis, which essentially provides an upper bound on flow enhancement, explicitly accounts for the influence of wall shear stress, initial polymer concentration etc. A comparison with the pertinent experimental data shows reasonable agreement. c concentration - c ₀ concentration in shear-free region - c _i initial concentration - d rate of deformation tensor - g acceleration due to gravity - g ₁ function defined in eq. [13] or [15] - g ₂ function defined in eq. [18] or [20] - H half-channel thickness or film thickness - K gas law constant - L length of the channel or film - q flow rate per unit width - q ^* normalized flow rate - T temperature - v velocity - V mean velocity - y transverse distance - y _c location of solvent layer - _w /µ _s - _w /c ₀ KT - /t convected derivative - dimensionless cenentration,c/c ₀ - _c dimensionless interface concentration - _w dimensionless wall concentration - relaxation time - µ _eff effective viscosity - µ _s solvent viscosity - dimensionless transverse distance,y/H - _c dimensionless interface location - density - stress tensor - _w wall shear stress - c _i KT/ _w - ns no slip NCL-Communication No. 3155