Alternating copolymerization of α-methylstyrene and maleic anhydride

Alternating copolymers of α-methylstyrene (α-MeSt) and maleic anhydride (MAn) were prepared by free-radical-initiated polymerization in bulk, benzene, or butanone as solvents. By applying the generalized model described by Shirota and co-workers, the reactivity ratios k_1c/k₁₂ and k_2c/k₂₁ were calculated from the change of copolymerization rate with monomer feed at constant total monomer concentration. From the equation R_p = R_p(f) + R_p(CT) were calculated R_p(f) and R_p(CT), and it was found that in benzene the reaction proceeds predominantly by the addition of CT-complex monomers, while in butanone, cross propagation of free monomers predominates. Termination occurs predominantly by homotermination of α-MeSt macro free radicals, k_t22, although the cross termination k_t21 is also operative.     

Emulsion copolymerization behavior of α-methylstyrene with methacrylonitrile

The emulsion copolymerization behavior of α-methylstyrene with methacrylonitrile is described. The effects of polymerization temperature, potassium persulfate initiator concentration, sodium lauryl sulfate emulsifier concentration on copolymer yield, molecular weight, and rate of copolymerization are described. The copolymer was found to have an azeotropic composition at 43 mole-% AMS. Reactivity ratios were determined to be 0.06 and 0.28 for AMS and MAN, respectively.     

Kinetics of free-radical copolymerization of α-methylstyrene and styrene

The free-radical copolymerization of α-methylstyrene and styrene has been studied in toluene and dimethyl phthalate solutions at 60°C. Gas chromatography was used to monitor the rate of consumption of monomers. For styrene alone, the measured rate of polymerization R_p and M?_n of the polymer coincided with values expected from previous studies by other workers. Solution viscosity η affected R_p and M?_n of styrene homopolymers and copolymers as expected on the basis of an inverse proportionality between η^1/2 and termination rate. The rate of initiation by azobisisobutyronitrile appears to be independent of monomer feed composition in this system. Molecular weights of copolymers can be accounted for by considering combinative termination only. The effects of radical chain transfer are not significant. A theory is proposed in which the rate of termination of copolymer radicals is derived statistically from an ideal free-radical polymerization model. This simple theory accounts quantitatively for R_p and M?_n data reported here and for the results of other workers who have favored more complicated reaction models because of the apparent failure of simple copolymer reactivity ratios to predict polymer composition. This deficiency results from systematic losses of low molecular weight copolymer species in some analyses. Copolymer reactivity ratios derived with the assumption of a simple copolymer model and based on rates of monomer loss can be used to predict R_p values measured in other laboratories without necessity for consideration of depropagation or penultimate unit effects. The 60°C rate constants for propagation and termination in styrene homopolymerization were taken to be 176 and 2.7 × 10⁷ mole/l.-sec, respectively. The corresponding figures for α-methylstyrene are 26 and 8.1 × 10⁸ mole/l.-sec. These constants account for the sluggish copolymerization behavior of the latter monomer and the low molecular weights of its copolymers. The simple reaction scheme proposed here suggests that high molecular weight styrene–α-methylstyrene copolymers can be produced at reasonable rates at 60°C by emulsion polymerization. This is shown to be the case.     

Alternating copolymerization of β-methylstyrene and maleic anhydride

Alternating copolymers of β-methylstyrene and maleic anhydride were prepared by free-radical-initiated polymerization in bulk and in toluene as a solvent. The reactivity ratios k_1c/k₁₂ and k_2c/k₂₁ were calculated from the change of copolymerization rate with a monomer feed at a constant total monomer concentration according to the generalized model of Shirota and coworkers. From the equation R_p = R_p(f) + R_p(CT) were calculated R_p(f) and R_p(CT), and it was found that in toluene the copolymerization proceeds predominantly by the addition of CT-complex monomers. Termination occurs predominantly by homotermination of β-methyl-styrene macro free radicals, k_t22, but the cross termination k_t21 is also operative.     

Anionic copolymerization of α-methylstyrene and styrene: Kinetics and mechanism

A kinetic study of copolymerization of styrene and α-methylstyrene accompanied with depropagation, initiated by n-butyilithium in cyclohexane with tetrahydrofuran as an additive polar solvent, has been performed. The various propagation rate constants of active species and the complexation equilibrium constants between different kinds of active species were determined. Furthermore, the reactivity ratios of two monomers with regard to monomeric, monoetherated and dietherated active species were obtained.     

Monomer chain-transfer constants from emulsion copolymerization data: Styrene and α-methylstyrene

Radical chain-transfer constants can be deduced from corresponding measurements of rates and degrees of polymerization in copolymerization experiments. It is particularly useful to carry out such copolymerization in emulsion systems where the normal termination reactions are relatively less important and chain-transfer processes are significant in determining the number-average degree of polymerization. The method is illustrated for copolymerization of styrene and α-methylstyrene at three temperatures. Rate constants for transfer of styryl and α-methylstyryl radicals to either monomer were measured. All the rate constants are consistent with the relative stabilities of the product radicals which could be formed by the various transfer reactions. The procedure described here can be extended for measurements of rate constants for reactions of other potential transfer agents.     

Cationic polymerization of α-methylstyrene oxide

The polymerization of α-Methyl Styrene Oxide initiated by trityl hexachloroantimonate is reported upon. Data is presented on side reactions, percent yield and molecular weight of polymer produced in the polymerization.     

Free radicals in γ-irradiated poly-α-methylstyrene

Electron spin resonance (ESR) spectra were observed at ?160°C and at room temperature for γ-irradiated poly-α-methylstyrene. The spectrum observed at room temperature has been attributed to the radical species while that at ?160°C results from the same radical and superposition of the spectrum due to the radical ?H₂-C(CH₃)(C₆H₅)-. The radicals which are stable at room temperature could be used to graft vinyl acetate.     

Polymerization of α-methyleneindane: A cyclic analog of α-methylstyrene

α-Methyleniedane (MI), a cyclic analog of α-methylstyrene which does not undergo radical homopolymerization under standard conditions, was synthesized and subjected to radical, cationic, and anionic polymerizations. MI undergoes radical polymerization with α,α′-azobis(isobutyronitrile) in contrast to α-methylstyrene, owing to its reduced steric hindrance, though the polymerization is slow even in bulk. Cationic and anionic polymerization of MI with BF₃OEt₂ and n-butyllithium, respectively, proceed rapidly. The thermal degradation behavior of the polymer depends on the polymerization conditions. The anionic and radical polymers are heteortactic-rich. Reactivity ratios in bulk radical copolymerization on MI (M₂) with methacrylate (MMA, M₁) were determined at 60°C (r₁ = 0.129 and r₂ = 1.07). In order to clarify the copolymerization mechanism, radical copolymerization of MI with MMA was investigated in bulk at temperatures ranging from 50 to 80°C. The Mayo–Lewis equation has been found to be inadequate to describe the result due to depolymerization of MI sequences above 70°C.     

Cationic polymerization of β-pinene,styrene and α-methylstyrene

Molecular weight distributions determined by gel permeation chromatography demonstrate that α-methylstyrene copolymerizes with both β-pinene and styrene, forming both bi- and terpolymers. The composition of precipitated polymer versus crude polymer, as determined by nuclear magnetic resonance, suggests that β-pinene and styrene also copolymerize. Extraction of the latter bipolymer of β-pinene and styrene with acetone gives only a small amount of insoluble β-pinene homopolymer, confirming that β-pinene and styrene copolymerize in m-xylene. GPC analysis shows that each copolymer contains some homopolymer. A comparison of M _n with molecular weight calculated from NMR analysis, assuming chain transfer to solvent, indicates that chain transfer is the predominant method of forming dead polymer. The carbonium ions of the growing chain tend to transfer to solvent with increasing ease in the order β-pinene, styrene, and α-methylstyrene.     

Thermal properties and morphology of α-methylstyrene-butadiene-α-methylstyrene triblock copolymer

Poly(α-methylstyrene-butadiene-α-methylstyrene) (mSBmS) was synthesized by two stages living anionic polymerization. Sodium naphthalene was used as initiator and HMPT as promoter to accelerate cross-over reactions. The microstructure and composition of mSBmS were identified by infrared and nuclear magnetic resonance spectroscopes. The domain size was roughly calculated from TEM observation. It was observed that the morphology changed with the composition. The mSBmS exhibited two T_g^s, ?4 and 172°C, that associated with polybutadiene and poly-α-methylstyrene, respectively. Comparing stress relaxation behaviors of mSBmS and styrene-butadienestyrene (SBS) at various temperatures, mSBmS showed a better thermal stability and degradation resistance than SBS. From the thermal gravimetric analysis, at 200°C, mSBmS gave a weight loss less than 1%, which provided a further evidence of better thermal stability of this material than of SBS.     

Structure of the tetramer of α-methylstyrene

The structure of the tetrameric dianion formed by α-methylstyrene in tetrahydrofuran by reaction with sodium has been examined. Mass spectral, NMR, infrared, and kinetic data all indicate that the structure is rather than the structure which had previously been assumed for this species.     

Dilatometric constant for polymerization of α-methylstyrene

By measurement of the specific volume of solutions of poly-α-methylstyrene in α-methylstyrene monomer at 25°C, the dilatometric constant was found to be K_D = (0.002007 ± 0.000030)%^?1. Estimation of the temperature dependence resulted in the equation (K_D)_t = 1.81 × 10^?3 + 7.82 + 10^?6 t, where t denotes temperature in °C.     

Polymerization of α-methylstyrene by n-butyllithium in tetrahydrofuran

The kinetics of polymerization of α-methylstyrene by n-BuLi (labeled with C¹⁴ and unlabeled) has been studied in tetrahydrofuran at ?78°C. The catalyst n-BuLi was used as a complex of n-BuLi in THF and a hexane solution of n-BuLi. Contrary to expectations, the relative polymerization rate and the catalyst consumption were higher when a hexane solution of n-BuLi was used. Experimental molecular weights of the polymers greatly exceeded those calculated for the case of complete catalyst consumption. The polymers exhibited low polydispersity, and when a hexane solution of n-BuLi was used, the molecular weight distribution was bimodal. The rate of initiation for the case of polymerization α-methylstyrene with a hexane solution of n-BuLi as a catalyst was much higher than in the polymerization of α-methylstyrene with the use of the complex of n-BuLi in THF as in situ catalyst. Experimental data confirm the preferable interaction of α-methylstyrene with associated n-BuLi in the presence of THF. The complex which was formed as a result of such interaction is an active centers of polymerization.     

Stereospecific polymerization of α-methylstyrene by friedel-crafts catalysts

The relationship between stereoregularity and polymerization conditions of α-methylstyrene has been studied by means of NMR spectra. The effects of solvents and various Freidel-Crafts catalysts have been investigated. The stereoregularity of poly-α-methylstyrene increased with increased polymer solubility in the solvent used and with decreasing polymerization temperature. This behavior is completely different from the stereospecific polymerization of vinyl ethers and methyl methacrylate in homogeneous systems. This may be due to the strong steric repulsion exerted by the two substituents in the α-position of α-methylstyrene. For example, with BF₃ · O(C₂H₅)₂ as catalyst at ?78°C., atactic polymer is obtained in n-hexane, a nonsolvent for α-methylstyrene, whereas highly stereoregular polymer is produced in toluene or methylene chloride, good solvents for the polymer. However, the polarity of the solvent and the nature of the catalyst hardly affect the stereoregularity of the polymer.     

Trityl salt—initiated polymerization of α-methylstyrene

The initiation reaction of the polymerization of α-methylstyrene by trityl tetrachloroferate and tritylhexachloroantimonate in 1,2-dichloroethane at 20°C was studied. The rate constants were 14 × 10^?3 and 27 × 10^?3 L mol^?1s^?1, respectively. The dissociation constants of tritylterachloroferate (K_d = 0.88 × 10^?4M^?1) and tritylhexachloroantimonate (K_d = 2.64 × 10^?4M^?1) was determined. The effect of electron acceptors and donors on the dissociation equilibrium and initiation rate was investigated. It was shown that in strongly dissociated ion pairs such as stable carbenium salts the electron donors and acceptors have no appreciable effect on the magnitude of the dissociation. The temperature dependence of the rate constants in the ?20–+20°C range yielded the following thermodynamic parameters for trityltetrachloroferate: E_i = 8.54 kcal/mol; A = 3.2 × 10⁴ mol^?1s^?1; ΔH* = 8 kcal/mol; and S* = ?39.8 eu.     

Polymerization and copolymerization of α-methacrylophenone

Under a variety of conditions it has not been possible to induce the free-radical-initiated homopolymerization of α-methacrylophenone (α-MAP). The only product isolated from such efforts was the Diels-Alder dimer of the monomer. A Mayo-Lewis plot of the free-radical copolymerization of α-MAP and styrene shows considerable scatter but the copolymer composition indicates that an α-MAP unit can add to itself. These results have been ascribed to a penultimate effect. α-MAP is homopolymerized by dimsylsodium or n-butyllithium. Attempted copolymerization of α-map and styrene with n-butyllithium produces >95% α-MAP. Unexpectedly, α-MAP does not homopolymerize with lithium dispersion, but does react in the presence of styrene to give product containing a relatively small amount of α-MAP.     

Equilibrium anionic polymerization of α-methylstyrene in p-dioxane

The equilibrium anionic polymerization of α-methylstyrene in p-dioxane, with potassium as initiator, has been investigated at 5, 15, 25, and 40°C by using high-vacuum techniques. The comparison of these results with those obtained previously for the equilibrium polymerization of α-methylstyrene in tetrahydrofuran revealed that, although the values of ΔG_1c, the free-energy change upon the polymerization of 1 mole of liquid monomer to 1 bases-mole of liquid amorphous polymer of infinite chain length, are the same for both systems, there is a distinct effect of the solvent. This effect is reflected in the value of monomer equilibrium concentration and its variation with polymer concentration and is explained in terms of a solvent–monomer and solvent–polymer interaction parameter.