IR- und119Sn-Mössbauer-Spektren einiger Zinn(II)-Phosphate

The infrared and¹¹⁹Sn-Mössbauer spectra of Sn₂PO₄Cl, SnPO₄H, Sn₂PO₄(OH), and Sn₃(PO₄)₂ have been recorded and interpreted in relation to known structural data. The results allow a wider insight into the bond properties of the phosphate groups as well as on the geometry and bond characteristics of the coordination polyhedra associated with the Sn(II) ions.     

Champ de forces de symétrie locale des composés oxyfluorés du phosphore(V)—II. Le monofluorotrioxophosphate (M.F.P.) PO3F2− et le trifluorure de phosphoryle (T.F.P.) POF3

The objective of this work was to assign systematically the normal modes of vibration of the phosphorous(V) oxyfluorates. These compounds are derived from the orthophosphates by successive substitution according to the sequence PO³⁻₄→PO₃F²⁻→PO₂F₂⁻→POF₃ after consideration of PO₂F₂⁻ (D.F.P.), the work was extended to PO₃F²⁻ (M.F.P.) and phosphoryl trifluoride (T.F.P.). The a priori calculation of the vibrational frequencies of these species in a local symmetry force field yields very good agreement with the observed frequencies. Furthermore, the results of this vibrational study confirm the contracting effect of the fluorine atoms, which has already been shown by X-ray crystallography.     

Etude Structurale de la forme basse Température de NH4Sn2F5 (Type γ)

Structural Study of the Low-temperature Modification of NH₄Sn₂F₅ (Type γ) NH₄Sn₂F₅, monoclinic, space group C2, Cm or C2/m, a = 7.361(4) Å, b = 12.752(6) Å, c = 10.492(5) Å, β = 103.5(7)°, V = 957,2(9) ų, Z = 6. MoKα (= 0.7107 Å) R = 0.036 for 476 observed reflexions. The structure is built from alternative layers [Sn? F] and [NH₄⁺]. Three kinds of fluorine have vacancy positions, that explains the bidimensional conduction in NH₄Sn₂F₅.     

Synthesis of rubidium fluorophosphatozirconates in the ZrO2-H3PO4-RbF-H2O system and their luminescent properties

Rubidium fluorophosphatozirconates (RFPZs) were synthesized along sections of the ZrO₂-H₃PO₄-RbF-H₂O system where PO ₄ ^3? /Zr = 1–2 (mol/mol) and RbF/Zr = 1–5 (mol/mol) and the initial solution contains 2–5 wt % ZrO₂. The following RFPZs have been isolated for the first time: RbZrF₂PO₄ · 0.5H₂O, Rb₃H₃Zr₃F₃(PO₄)₅, and RbZr₃F₄(PO₄)₃ · 1.5H₂O. Their formation fields were determined. The compounds were characterized using powder X-ray diffraction, crystal-optical analysis, chemical analysis, electron probe microanalysis, thermal analysis, and IR spectroscopy. Luminescent properties of the compounds were measured. All RFPZs are orthophosphates, have high thermal durability, and X-ray luminescence (XRL). Rb₃H₃Zr₃F₃(PO₄)₅ has the highest XRL intensity.     

Phase formation in the ZrO(NO3)2-H3PO4-CsF(HF)-H2O system

The phase formation in the system ZrO(NO₃)₂-H₃PO₄-CsF(HF)-H₂O was studied at the molar ratio CsF/Zr = 1 along the sections PO ₄ ^3? /Zr = 0.5 and 1.5 at a ZrO₂ concentration in the initial solution of 2?C14 wt %. The following compounds were isolated: Cs₅Zr₄F₂₁ · 3H₂O, CsZr₂(PO₄)₃ · 2HF · 2H₂O, CsZrF₂PO₄ · H₂O, CsZr₂F₆PO₄ · 4H₂O (for the first time), CsHZrF₃PO₄ (for the first time), Cs_0.70ZrF(PO₄)_1.23 · nH₂O, and CsHZr₂F₂(P_O4)_2.66 · nH₂O. The compositions of CsZrF₂PO₄ · H₂O, Cs_0.70ZrF(PO₄)_1.23 · nH₂O, and CsHZr₂F₂(PO₄)_2.66 · nH₂O are conditional. All the compounds were characterized by crystal-optical, X-ray powder diffraction, thermal analyses, and IR spectroscopy. The formula CsHZrF₃PO₄ was established by energy-dispersive analysis with a LEO-1450 scanning electron microscope and an MS-46 CAMECA X-ray microanalyzer.     

Phase formation in the HfO(NO3)2-H3PO4-CsF(HF)-H2O system

The phase formation in the system HfO(NO₃)₂-H₃PO₄-CsF(HF)-H₂O was studied along the sections at the molar ratios PO ₄ ^3? /Hf = 0.5, 1.5, and 2.0 and RbF:Hf = 1?C5, and also in the presence of HF at CsF: Hf = 1. The initial solutions contained 2?C24 wt % HfO₂. The synthesis was performed at room temperature. The following substances were isolated: crystalline cesium fluorophosphate hafnates CsHf₂F₆PO₄ · 4H₂O, CsHfF₂PO₄ · 0.5H₂O, and CsH₂Hf₂F₂(PO₄)₃ · 2H₂O; X-ray amorphous cesium fluorophosphate hafnate of the average composition Cs₂Hf₃O_1.5F₅(PO₄)₂ · 5H₂O; and X-ray amorphous cesium fluorophosphate nitrate hafnate Cs₅H₄Hf₃F₇(PO₄)_3.66(NO₃)₃ · 5H₂O. The compositions of the amorphous phases should be refined. Cesium fluorophosphate hafnates were obtained for the first time. The compounds were studied by crystal-optical, elemental, X-ray diffraction, IR spectroscopic, and electron microscopic analyses.     

A series of open-framework tin(II) phosphates: A[Sn4(PO4)3] (A=Na,K, NH4)

A new series of isostructural open-framework tin(II) phosphates with general formula A[Sn₄(PO₄)₃], where A=Na, K, NH₄, has been synthesized by hydrothermal methods. The crystal structures of NaSn₄(PO₄)₃ (I) and KSn₄(PO₄)₃ (II) have been solved by single crystal X-ray diffraction methods. Both phases crystallize in the trigonal space group R3c (#161) with Z=6 and cell parameters a=9.5508(13) Å, c=24.083(3) Å for I, and a=9.7124(11) Å, c=24.363(3) Å for II. The structure consists of a negatively charged [Sn₄(PO₄)₃]⁻ framework with channels running parallel to the a- and b-axes where the charge compensating A⁺ cations are located. An interesting feature is that half of the channels are empty due to the specific geometry of the SnO₃ units—the lone electron pair of the tin atoms “protrudes” in these channels thus preventing the insertion of A⁺. The new phases have also been characterized by infrared and thermogravimetric analyses.     

Ab initio calculation of the 31P NMR shielding tensor for the series POaFb−(2a+b−5), a+b=4 and for HPO42−

Ab initio coupled Hartree-Fock perturbation theory (CHFPT) calculations on PO₄³⁻, PO₃F²⁻, PO₂F₂⁻, PF₃O, PF₄⁺ and HPO₄²⁻ using large polarized Gaussian bases satisfactorily reproduce experimental trends in ³¹P magnetic shielding anisotropies.Accurate evaluation of the shielding tensor for HPO₄²⁻ requires the inclusion of the H atom. Along the series PO_a F_b^{−(2a+b−5)} the calculated isotropic shielding shows a “sagging” pattern, i.e. the shielding is smallest for the intermediate member of the series PO₃F²⁻. The shielding for this species is, however, a strong function of the P-F and P-O distances. PO₃F²⁻ and HPO₄²⁻ are calculated to be similar in both average shielding and shielding anisotropy.     

Hydrothermal Synthesis, Single-Crystal Structure Analysis, and Solid-State NMR Characterization of Zn2(OH)0.14(3)F0.86(3)(PO4)

The zinc fluoro phosphate Zn₂F(PO₄) has been produced by hydrothermal synthesis employing hydrofluoric acid as a mineralizer in a H₂O or D₂O medium. A single-crystal X-ray synchrotron diffraction analysis of Zn₂F(PO₄) shows that the zinc fluoro phosphate is monoclinic, a=9.690(1), b=12.793(1), and c=11.972(1) Å, β=108.265(1)°, space group P2₁/c, No. 14, Z=16. Reflections hkl with k=2n+1 are weak but significant and the structure shows pseudosymmetry. Zn₂F(PO₄) has the wagnerite-type M₂F(XO₄) structure with four Zn atoms each coordinated to four O atoms and one F atom while four other Zn atoms are coordinated to four O atoms and two F atoms. A difference Fourier map, calculated from the single-crystal X-ray data, shows additional electron density close to the four fluorine atoms, indicating a possible partial substitution of F⁻ by OH⁻ ions. This is unambiguously confirmed by ³¹P-{¹H} cross-polarization magic-angle spinning (MAS) and by ¹H/²H MAS NMR spectroscopy. The narrow line width observed for the ¹H resonance and the unique set of ²H quadrupole coupling parameters (obtained for the Zn₂F(PO₄) sample using D₂O as medium) show that ¹H/²H is present as OH(D) groups rather than as water of crystallization in the structure. Quantitative ¹H MAS NMR analysis shows that the composition of the sample is Zn₂(OH)_0.14(3)F_0.86(3)(PO₄). The high-speed ¹⁹F MAS NMR spectrum exhibits two resolved resonances with equal intensity, which are ascribed to an overlap of resonances from the four distinct fluorine sites in Zn₂(OH)_0.14(3)F_0.86(3)(PO₄).     

Darstellung und Strukturbestimmung zweier Salze der Trimetaphosphimsäure,K3(PO2NH)3 und Rb3(PO2NH)3

Synthesis and Structure Determination of Two Salts of the Trimetaphosphimic Acid, K₃(PO₂NH)₃ and Rb₃(PO₂NH)₃ The reaction between P₃N₅ and the corresponding alkalimetal hydroxide monohydrate under ammonothermal conditions (6 kbar, 450 °C after 10 d) in autoclaves leads to the salts of the trimetaphosphimic acid K₃(PO₂NH)₃ resp. Rb₃(PO₂NH)₃. The structure of K₃(PO₂NH)₃ was solved by single crystals X-ray methods. The isotypic structure of Rb₃(PO₂NH)₃ was solved by X-ray powder diffraction methods. K₃(PO₂NH)₃: R3 (No. 148), a = 12.615(3) Å, c = 10.224(2) Å, Z = 6, R₁/wR₂ = 0.0276/0.0726, N(F > 2σ(F)) = 769, N(Var.) = 51.Rb₃(PO₂NH)₃: R3 (No. 148), a = 12.9971(5) Å, c = 10.5485(5), Z = 6, R_Bragg(F) = 0.0626, 289 reflections. K₃(PO₂NH)₃ and Rb₃(PO₂NH)₃ contain six-membered rings P₃N₃ substituted by oxygen which are connected to double molecules by N–H … O bridge bonds. These twinmolecules are stacked in columns which form the motive of close packed rods. K⁺ resp. Rb⁺ are between these columns. They are coordinated by 6 O which belong to 5 different rings.     

Phase formation in the ZrO(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>-H<Subscript>3</Subscript>PO<Subscript>4</Subscript>-CsF-H<Subscript>2</Subscript>O system at low concentration of the phosphorus-containing component

The ZrO(NO₃)₂-H₃PO₄-CsF-H₂O system was studied at 20°C along the section at a molar ratio of PO₄³⁻/Zr = 0.5 (which is of the greatest interest in the context of phase formation) at ZrO₂ concentrations in the initial solutions of 2–14 wt % and molar ratios of CsF: Zr = 1−6. The following compounds were isolated for the first time: crystalline fluorophosphates CsZrF₂PO₄ · H₂O, amorphous oxofluorophosphate Cs₂Zr₃O₂F₄(PO₄)₂ · 3H₂O, and amorphous oxofluorophosphate nitrate CsZr₃O_1.25F₄(PO₄)₂(NO₃)_0.5 · 4.5H₂O. The compound Cs₃Zr₃O_1.5F₆(PO₄)₂ · 3H₂O was also isolated, which forms in a crystalline or glassy form, depending on conditions. The formation of the following new compounds was established: Cs₂Zr₃O_1.5F₅(PO₄)₂ · 2H₂O, Cs₂Zr₃F₂(PO₄)₄ · 4.5H₂O, and Zr₃O₄(PO₄)_1.33 · 6H₂O, which crystallize only in a mixture with known phases. All the compounds were studied by X-ray powder diffraction, crystal-optical, thermal, and IR spectroscopic analyses.     

Synthese und Kristallstruktur von Te3O3(PO4)2, einer Verbindung mit fünffach koordiniertem Tellur(IV)

Synthesis and Crystal Structure of Te₃O₃(PO₄)₂, a Compound with 5‐fold Coordinate Tellurium(IV) Polycrystalline Te₃O₃(PO₄)₂ is formed during controlled dehydration of (Te₂O₃)(HPO₄) with (Te₈O₁₀)(PO₄)₄ as an intermediate product. Colourless single crystals were prepared by heating stoichiometric amounts of the binary oxides P₂O₅ und TeO₂ in closed silica glass ampoules at 590 °C for 8 hours. The crystal structure (P2₁/c, Z = 4, α = 12.375(2), b = 7.317(1), c = 9.834(1)Å, β = 98.04(1)°, 1939 structure factors, 146 parameters, R[F² > 2σ(F²)] = 0.0187, wR2(F² all) = 0.0367) was determined from four‐circle diffractometer data and consists of [TeO₅] polyhedra und PO₄ tetrahedra as the main building units. The framework structure is made up of cationic zigzag‐chains of composition [Te₂O₃]²⁺ which extend parallel to [001] and anionic [Te(PO₄)₂]^2— units linked laterally to these chains. This leads to the formation of [Te₂O₃][Te(PO₄)₂] layers parallel to the bc plane which are interconnected via weak Te‐O bonds.     

Sur une serie d'oxyfluores du chrome VI de formule MCrO3F où M = K,Rb, Cs et NH4

The compounds MCrO₃F, (M = K, Rb, Cs and NH₄) have been prepared, then studied by X-Ray. diffraction — From these results it appears a different occupation of the same crystallographic position by O and F at the top of the tetrahedron CrO₃F^? against M. That means a different reactivity of these compounds and shows the importance of the F atom. The distances CrO(1,60Å) and CrF (near of 1,74 Å) are discussed. The CrO₃F^? compounds are compared with SO₃F^?, ClO₄^?, CrO₃Cl^? and PO₂F₂^? compounds.     

Eu luminescence—a structural probe in BiCa4(PO4)3O, an apatite related phosphate

Eu³⁺ luminescence is studied in apatite-related phosphate BiCa₄(PO₄)₃O. Compositions of the formula Bi_1−xEu_xCa₄(PO₄)₃O [x=0.05, 0.1, 0.3, 0.5, 0.8 and 1.0] are synthesized and they are isostructural with parent BiCa₄(PO₄)₃O. Room temperature photoluminescence shows the various transitions ⁵D₀→⁷F_J(=0,1,2) of Eu³⁺. The emission results of compositions with different Eu³⁺ content show the difference in site occupancy of Eu³⁺ in Bi_1−xEu_xCa₄(PO₄)₃O. The intense ⁵D₀-⁷F₀ line at 574 nm for higher Eu³⁺ content is attributed to the presence of strongly covalent Eu-O bond that is possible by substituting Bi³⁺ in the Ca(2) site. This shows the preferential occupancy of Bi³⁺ in Ca(2) site and this has been attributed to the 6s² lone pair electrons of Bi³⁺. This is further confirmed by comparing the emission results with La_0.95Eu_0.05Ca₄(PO₄)₃O.     

Bismuthiol I as an analytical reagent

Summary Bismuth and palladium have been determined volumetrically after precipitation as bismuthiol I complexes. From 0.1 N hydrochloric acid solutions they are separated from Fe²⁺, Al, Cr, Ce³⁺, Zr, Ti, Zn, Th, UO₂ ²⁺, Be, Mg, Mn, Co, Ni, alkalis, alkaline and rare earths.A mixture of tartrate or citrate and EDTA has been found to be useful for the separation of palladium at a p_H 3.5–8.5 from As, Zn, Bi, Sn⁴⁺, Sb, Fe³⁺, Tl⁺, Cu²⁺, Cd, Pb, Ru³⁺, Os⁴⁺, PO₄ ^3–, Ce⁴⁺, Ir⁴⁺, Rh³⁺, VO₃ ^–, CrO₄ ^2–, AsO₄ ^3–, WO₄ ^2–, MoO₄ ^2– and from all the other ions referred to above. Potassium iodide at p_H 6.0–8.0 and thiosulphate at 6–7 keep Ag, Pb, Hg²⁺ and Au³⁺, Ir⁴⁺, Os⁴⁺ respectively in solution and thus allow a selective precipitation of palladium.Hg²⁺, Pb, Cu²⁺, Ag, Tl⁺, Cd and Pd when present along with bismuth are first removed by the reagent and from the filtrate bismuth is estimated. Sn²⁺, Sb³⁺, Fe³⁺, F^–, VO₃ ^–, PO₄ ^3–, AsO₄ ^3– and CrO₄ ^2– interfere in bismuth determination while only Sn²⁺, Pt⁴⁺ and CN^– interfere in palladium estimation.     

Structural features of acidic fluorophosphatozirconates (hafnates) from the <Superscript>19</Superscript>F, <Superscript>31</Superscript>P, <Superscript>1</Superscript>H NMR data

Fluorophosphatometallates with the composition K₃H₃Zr₃F₃(PO₄)₅, Rb₃H₃Zr₃F₃(PO₄)₅, Rb₃H₃Hf₃F₃(PO₄)₅, CsH₂Hf₂F₂(PO₄)₃?2H₂O are studied by ³¹P, ¹⁹F, and ¹H NMR. It is found that protons enter in the composition of hydrophosphate groups and fluorine atoms occupy the terminal sites in the tetravalent metal environment. Schemes of the crystal structure of fluorophosphatometallates are proposed. It is established that in CsH₂Hf₂F₂(PO₄)₃?2H₂O water molecules are bonded to the phosphate group proton via a strong hydrogen bond and are characterized by a low energy barrier of molecular motions.     

Phase formation in the systems TiOCl2-H3PO4-MF(HF)-H2O (M = K, Rb, Cs)

From solutions containing 2–17 wt % TiO₂ at the molar ratios M/Ti = 1–4, F/Ti = 2–4, and PO ₄ ^3? /Ti = 0.5–10 under mild conditions, fluoro- and oxo(hydroxo) fluorophosphate titanates were isolated: crystalline M₂TiF₆ (M = K, Rb, Cs) and K₂Ti₂O_2.5F₂PO₄ · 2H₂O, and amorphous K₃Ti₄O(OH)F₇(PO₄)₃ · 5H₂O, Cs₂Ti₃O₂F₇PO₄ · 6H₂O, and CsTi₃O₃F₄PO₄ · 3H₂O. In a mixture with M₂TiF₆ and KCl, phosphate-ion-containing crystalline phases of unidentified composition were detected. The phases were studied by elemental, crystal-optical, X-ray powder diffraction, thermal, IR spectroscopic, and electron microscopic analyses. Annealing fluorophosphate titanates gives a mixture of MTiOPO₄ and TiO₂. All the mentioned alkali metal fluorophosphates contain the tetrahedral ion PO ₄ ^3? and titanium polyhedra with bonds Ti-F and Ti-O; some of them also contain bridging oxygen connecting titanium atoms: Ti-O-Ti; i.e., these substances are polymeric.     

Structure cristalline de (NH4)2PO3H,H2O: Stereochimie de l'Ion PO3H2− et ses relations avec PO3F2− et SO32−

(NH₄)₂PO₃H, H₂O crystallizes in the monoclinic system, space group P2₁/c, with a = 6.322(1) Å, b = 8.323(1) Å, c = 12.676(1) Å, β = 98.84(1) and Z = 4. The structure was refined to R = 0.022 based on 853 independent X-Rays intensities. Improved dimensions of the tetrahedral PO₃H^2? ion have been obtained: P?H = 1.34(2) and P?O = 1.514(2) Å. The geometry of this ion is compared with that of PO₃F^2? and SO₃^2? ions and we find a decrease of the volume: V_F? > V_H+ > V_{lone pair}.     

La7O6(BO3)(PO4)2:Eu3+/Tb3+荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La₇O₆（BO₃）（PO₄）₂：Eu³⁺材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为⁵D₀→⁷F₂特征能级跃迁,Eu³⁺的最优掺杂浓度为0.08,对应的CIE坐标为（0.610 2,0.382 3）;La₇O₆（BO₃）（PO₄）₂：Tb³⁺材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb³⁺的⁵D₄→⁷F₅能级跃迁,Tb³⁺离子的最优掺杂浓度为0.15,对应的CIE坐标为（0.317 7,0.535 2）。此外,对2种材料的变温光谱分析发现Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂荧光材料均具有良好的热稳定性。