Temperature dependence of the resolution of diastereomeric isoprenoids in capillary GC. Experiments with 50 μm, 100 μm,and 250 μm i.d. Columns

The resolution of the diastereoisomers of norpristane, pristane, and phytane was studied as a function of the column internal diameter and/or the residence time of the compounds in the column. Increasing the residence time in the column by operating the column at a lower temperature program rate enhances the resolution more than reducing the internal diameter of the column. Practical experience with ultra narrow bore columns is also presented.     

CGC analysis of the essential oils of citrus fruits on 100 μm i.d. columns

Narrow bore columns (100 μm) have successfully been applied in the analysis of commercial lemon oils. On these columns, high resolution is obtained in a short analysis time. Different Brazillian lemon oils are characterized qualitatively and quantitatively.     

On-column injection onto capillary columns. Part 2: Study of sampling conditions; practical recommendations

During one year continuous use of on-column injection, the typical advantages described in our first report have fully been confirmed. In addition the analysis of large sample volumes has proved promising. Only minor modifications have been applied to the on-column injector device. Broad evidence has been gathered showing that full separation efficiency of the capillary columns after on-column injection is attained only when cold trapping or the solvent effect, as band shortening mechanisms, are working- While, under the conditions of on-column injection, cold trapping is less efficient than with other injection techniques, the opposite holds true for the solvent effect. Compared with splitless injection, the danger of excessive solvent condensation on the column is increased. A working rule is presented for establishing the optimal chromatographic conditions for handling large sample volumes while ensuring full separation efficiency yet avoiding harm to the column.     

An investigation of microbore reverse-phase columns containing 3 μm packing materials

A procedure for packing 15 cm × 1 mm id reverse-phase microbore columns with 3 μm silicas obtained from different manufacturers is described. The speed of analysis and detection limits are compared to those obtained with a 50 cm × 1 mm id column packed with 10 μm ODS. The effect of detector time constant on the system, and flow rates on column efficiency are also examined.     

Gas chromatographic separation of sugars by on-column injection on glass capillary columns

Sugars were separated gas chromatographically on short apolar glass capillary columns by using cold, on-column injection (OCI) techniques. After silylation, oligomers up to the hexasaccharides could be efficiently separated in resonable retention times. Response factors of silylated sugars were determined as a function of varying sample amounts and concentrations. The optimum injection amount was found to be 1 μl in heptane as solvent.     

Large sample injection method (≥ 100 μL) for capillary GC using a commercial thermodesorption unit as injection device

A commercial thermodesorption and cold trap unit can be used as a large sample volume injection device in high resolution gas chromatography. Volumes of more than 100 μl can be injected. More than 97% of solvents, such as hexane, can be removed by a Tenax TA precolumn without any loss of compounds with volatilities comparable to naphthalene. Experimental conditions, recovery rates of polycyclic aromatic hydrocarbons, and the reproducibility of the method are described in detail. The method was successfully applied for the determination of PAH in air particulate matter extracts.     

High speed capillary GC on 10 m × 100 μm i.d. FSOT Columns

The chromatographic performance of 10 m × 100 μm i.d. capillary columns, coated with different stationary phases, was studied. TZ-ū plots were measured at different temperature program rates. The polarity and selectivity are strongly influenced by the temperature program rate. The analysis time depends on the capacity ratio and the selectivity factor; stationary phase selection thus is an important aspect in high speed capillary GC. A number of applications is presented and the applicability of split injection is discussed.     

Preparation,evaluation, and comparison of wide bore (320 μm) and narrow bore (50 μm) cyanosilicone-coated capillary columns for gas chromatography

The preparation of wide bore (320 μm) and narrow bore (50 μm) fused silica capillary columns is described for immobilized cyanopropyl substituted silicones containing 60 and 88% substitution. The effect of high temperature deactivation with cyanopropylcyclosiloxanes was studied with a special test mixture. Curing was achieved with dicumyl peroxide or azo-tert-butane. The columns were evaluated and compared in terms of efficiency, activity, polarity, and temperature stability. Different coating methods were compared for the narrow bore columns. The activity of the 60% cyanopropyl columns that had been immobilized with dicumyl peroxide was significantly larger than for azo-tert-butane immobilized columns. The polarity of polar columns appeared to depend greatly on column temperature and is completely different for wide and narrow bore columns.     

Application of the “cooled needle” technique to split and splitless sampling onto capillary columns

Cooled needle sampling using syringes was applied to splitless injection and to simulated distillation analyses. Slight changes of the construction of the previous device are also described. The changes concern the temperature profile within the injector and especially the vaporization insert. Even with the low carrier gas flow through the injector during splitless injection, discrimination by component volatility can be avoided. Precision and accuracy of simulated distillation data obtained with split sampling also can be improved by the cooled needle technique.     

Enantioselective separations of chiral molecules by μ-HPLC and SFC on microbore and packed microcapillary columns

New results obtained with microbore or microcapillary columns packed with DACH-DNB CSP (spherical silica, 5 μm) using conventional LC eluents or supercritical fluids are reported. Examples of direct chromatographic separations of complex mixtures of stereo-isomers on: a) long, packed microbore or microcapillary columns and b) several columns coupled in series are shown; in the latter case, a home-made calculation procedure (Simulation for Multi-Column Chromatography–SMCC) was used to quickly select the optimal conditions (kind of stationary phases and relative columns length).     

Total steroid profiling with capillary GC. Details on sample preparation

The accuracy and reproducibility of steroid and steroid conjugate determinations using capillary GC are evaluated. It is possible to analyze many unconjugated steroids, steroid sulfates, and some steroid glucuronides simultaneously, simply by using group fractionation based on successive hydrolysis and solvent extraction steps. However, a reliable determination of corticosteroid glucuronides can only be obtained after previous isolation of the glucuronides as a group, with ion exchange chromatography. In complex chromatograms, the combined use of nitrogen specific detection and flame ionization detection facilitates peak identification.     

Study of peak profiles in nonlinear gas chromatography: Application to the peak distortions observed with overloaded capillary columns

The elution profiles observed with overloaded capillary columns are well described by a four-parameter theoretical model derived from the basic mass balance equations which relies on an expansion of the partition isotherm to the second term and takes the sorption effect into account. The reliability of the model is demonstrated by the fact that the peak leaning coefficient obtained from a least squares fit of the model to the experimental peak is in good agreement with that obtained from the variation of peak height with retention time at peak maximum. The coefficeint of apparent axial dispersion is independent of sample size and can be used to characterize the plate height at zero concentration of an overloaded capillary column.     

At-column injector for capillary GC — design and evaluation

The present paper describes constructional details and evaluations of an at-column injector for capillary GC. Injections were made via a sample loop on a 0.32 mm i.d. capillary column. Two rotary valves were employed to allow a wash of the sample loop and a backflush of the transfer line. Repeatability, calculated from absolute area counts for n-alkanes was between 0.3–1% RSD, for injected sample volumes between 5 and 100 μl. Promising results were also obtained with syringe-based injections on narrow bore (100 μ i.d.) columns. Repeatability on the basis of normalized area counts was in the order of 0.1–0.2% RSD, while solvent tailing was practically absent.