Preparation of aromatic copolyesteramides by the direct polycondensation with a vilsmeier adduct derived from tosyl chloride and N,N-dimethylformamide

The reaction promoted by Vilsmeier adduct derived from tosyl chloride (TsCl) with N,N-dimethylformamide (DMF) was successfully applied to the preparation of copolyesteramides of high molecular weights directly from aromatic dicarboxylic acids, diamines, and bisphenols. The polycondensation was significantly affected by the reaction of activated dicarboxylic acids with bisphenols and diamines. Addition of a mixture of bisphenols and diamines likely caused gelation of the reaction mixtures, resulting in insoluble polymers, especially with high mol % diamines. Stepweise addition of them, however, gave the homogeneous reaction mixtures and copolymers of better solubility. These phenomena were studied in terms of sequence length distribution of polyester units, which was estimated by thermal analyses of the random copolymers prepared under various conditions for the initial reaction with bisphenols.     

Direct polycondensation of aromatic dicarboxylic acids and bisphenols with tosyl chloride and N,N-dimethylformamide in pyridine

A Vilsmeier adduct derived from arylsulfonyl chlorides and DMF in pyridine was successfully used as a new condensating agent for the synthesis of aromatic polyesters by the direct polycondensation of aromatic dicarboxylic acids and bisphenols and also of hydroxybenzoic acids. Polymers of high molecular weights (M?_w = 78,000) with relatively narrow molecular weight distribution (M?_w/M?_n ≈ 3.0) were prepared by reacting aromatic dicarboxylic acids with the adduct in pyridine, followed by addition of bisphenols. The polycondensation was significantly affected by the amount of DMF, the nature of the arylsulfonyl chlorides, the conditions of initial reaction of the acids with the adduct, and the rate of reaction with bisphenols. The process was adaptable to the direct polycondensation of hydroxybenzoic acids, affording polymers of high molecular weight (η_inh = 1.73).     

Copoly(amide—ester)s from p-aminobenzoic and hydroxybenzoic acids by the direct polycondensation with diphenyl chlorophosphate and LiCl

The reaction promoted by diphenyl chlorophosphate (DPCP) and LiCl was found to be effectively used for the preparation of aromatic polyesters with high molecular weights directly from hydroxybenzoic acids when the condensing agent was added dropwise. The reaction was successfully to the direct polycondensation reaction of p-aminobenzoic and hydroxybenzoic acids, giving high-molecular-weight copoly(amide—ester)s soluble in amide or phenolic solvents. Copolycondensations of isophthalic and terephthalic acids with bisphenols and aromatic diamines were also examined by adding the DPCP solution to a mixture of these monomers or by initial reaction of DPCP with the acids followed by dropwise addition of a mixture of bisphenols and the diamines. The latter stepwise reaction gave random copolymers soluble in amide and phenolic solvents. Thermal properties of these copolymers were studied.     

Benzimidazole polymers from aldehydes and tetraamines

A new method for the preparation of benzimidazole polymers is described. The solution polymerization of aromatic tetraamines with isophthalaldehyde bis bisulfite adduct in N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (MP), and dimethyl sulfoxide (DMSO) produced polybenzimidazoles with viscosities (ηinh) in the range of 0.3–0.5 measured in formic acid solution. Also a model compound study with benzaldehyde, benzaldehyde diethyl acetal, and benzaldehyde bisulfite adduct with o-phenylenediamine was carried out. The results showed that the reaction of benzaldehyde bisulfite adduct with o-phenylenediamine in DMAc as the solvent gave quantitative yields of 2-phenylbenzimidazole. Excellent yields of 2-phenylbenzthiazole, 2-phenylbenzoxazole, and 2-pyridylbenzimidazole were also obtained with the benzaldehyde bisulfite adduct and picoline-2-carboxaldehyde bisulfite adduct with o-aminothiophenol, o-aminophenol, and o-phenylenediamine. The reaction conditions for the preparation of the polymers and the model compounds are very mild and the reaction times range from 15 min to 1 hr for the model compounds and 3–5 hr for the polymers. Longer reaction times did not increase the viscosities of the polymers to any extent.     

Aromatic copolyesteramides by the direct polycondensation with diphenyl chlorophosphate and carboxamides in pyridine

The reaction promoted by a Vilsmeier adduct derived from diphenyl chlorophosphate and N,N-dialkylcarboxamides such as N,N-dimethylformamide was successfully used for the preparation of soluble copolyesteramides directly from aromatic dicarboxylic acids, bisphenols, and a wide range of mole percent diamines. The polycondensation was affected by the carboxamides used, and an attempt was made to explain the effect by the ester sequence in polyamide units by examining a competitive reaction of benzoic acid with a phenol and an aniline and by examining the thermal properties of the copolymers produced.     

Direct polyesterification promoted by a complex of diphenyl chlorophosphate with LiBr

The diphenyl chlorophosphate (DPCP)-promoted polycondensation reaction between aromatic dicarboxylic acids and bisphenols was largely improved by carrying out the reaction in the presence of lithium halides to give high molecular weight aromatic polyesters. Among the halides LiBr, which is capable of forming a complex with hexamethylphosphoramide, was most effective, suggesting that a similar complexation of DPCP with LiBr in pyridine facilitates the complete reaction of DPCP with carboxyl groups. The complex could selectively activate carboxyl groups of hydroxybenzoic acids to give high molecular weight copolyesters from several combinations of aromatic hydroxy acids. The reaction could also be adaptable to the copolycondensations of a mixture of the dicarboxylic acids, bisphenols, and hydroxybenzoic acids.     

Effects of iron(III) chloro complexes on the polymerization of styrene

The polymerization of styrene initiated by 2,2′-azobisisobutyronitrile has been studied in N,N-dimethylformamide solution at 60°C in the presence of hexakis(N,N-dimethylformamide) iron(III) tetrafluoroborate alone, and also in the presence of added lithium chloride. The presence of Fe(DMF)₆³⁺ ions in the polymerizing systems caused retardation, but iron(III) chloro complexes produced well defined inhibition periods. Velocity constants at 60°C for polystyryl radicals towards Fe(DMF)₆³⁺, Fe(DMF)₅Cl²⁺, Fe(DMF)₄Cl₂⁺, and FeCl₄^? ions were calculated to be 847, 4.15 × 10⁴, 6.55 × 10⁴, and 3.14 × 10⁴ l./mole-sec, respectively. Values of the initiator efficiency f for most systems investigated ranged from 0.59 to 0.62.     

Studies on the Photochemical Oxidation of 1,3-Diphenylisobenzofuran and Cis-Cyclooctene in N,N-Dimethylformamide–Propanol Binary Mixture

Kinetic studies on the photochemical oxidation of 1,3-diphenylisobenzofuran have been carried out in binary liquid mixtures of N,N-dimethylformamide (DMF) with 1-propanol (PrOH). The strongest influence of solvating effects upon the course of this reaction was observed for compositions of the studied mixture corresponding respectively to ca. 50?mol% of PrOH. Additionally, we have carried out analogous studies of photooxidation of cis-cyclooctene. Similarly as previously, the noticeable influence of solvating effects upon the course of this reaction corresponded to ca. 50?mol% of DMF. We suspect that the mechanism of this effect is associated with the formation of the polar intermediate during the ene reaction being easier.     

Preparation of aromatic polyesters by the direct polycondensation reaction with diphenyl chlorophosphate in pyridine

The direct polycondensation reaction of diphenyl chlorophosphate (DPCP) as a new condensing agent in pyridine was used for the preparation of polyarylene esters. High-molecular-weight polymers can be prepared by reacting a pyridine solution of dicarboxylic acids and DPCP in the presence of LiCl, followed by treating with a pyridine solution of bisphenols. About an equivalent of LiCl, and 30 mol % excess of DPCP were most favorably added. Effects of the initial reaction of the acids and DPCP, and of dropwise addition of bisphenols on the polycondensation were investigated. Polycondensations of several hydroxybenzoic acids were also carried out with limited success.     

Cationic polyelectrolytes. II. Amination of chloromethylated polystyrene with hydroxyalkylic secondary amines

The reaction of chloromethylated polystyrene with methyl(2- hydroxyethyl)amine and butyle (2-hydroxyethyl)amine was studied kinetically. The reaction of benzyl chloride with these amines was also investigated for comparison. N,N-dimethylformamide and dioxane were used as solvents. The reactions of benzyl chloride with the two amines in these solvents took place according to normal kinetics of the second order. Reaction kinetics depend on the nature of the amine and solvent in Chloromethylated polystyrene reactions. In dioxane the self-accelerating effect of the reaction for β ? 0.5 is apparent. Steric hindrance of the reaction, beginning with a conversion degree of about 75%, wss observed for butyl(2-hydroxyethyl)amine in N,N-dimethylformamide. This self-accelerating effect is observed in dioxane at the same reaction degree. The activation energies and frequency factors were calculated for the amination of benzyl chloride and chloromethylated polystyrene with the two amines in N,N-dimethylformamide and dioxane.     

Radical copolymerization of 2-ethylacrylic acid and methacrylic acid

Copolymers of 2-ethylacrylic acid (EAA) and methacrylic acid (MAA) were prepared in bulk and in N,N-dimethylformamide (DMF). Although precipitation of the copolymers was observed in bulk, the reaction mixtures remained apparently homogeneous in DMF. Best-fit terminal-model reactivity ratios were determined by a nonlinear least squares technique to be r_MAA = 1.14 and r_EAA = 0.23 in bulk, and r_MAA = 1.91 and r_EAA = 0.09 in 50% DMF solution. Examination of ¹³C-NMR spectra provided convincing evidence for the formation of statistical copolymers. Copolymerizations richer in MAA provided copolymers of higher molecular weights.     

Preparation of monodisperse polymer particles from 4-vinylpyridine

Dispersion polymerization of 4-vinylpyridine was performed by using polystyrene-block-polybutadiene as stabilizer in a mixture of N,N-dimethylformamide (DMF) and toluene to produce polymer particles. The weight ratio of the solvents affects the particle size and dispersity. In the range of DMF content from 5 to 20 wt.-%, uniform particles of a diameter of ca. 1 μm were obtained. The present system was expanded to the preparation of monodisperse particles of poly[(4-vinylpyridine)-co-(methacrylic acid)].     

取代吲哚-3-甲醛类化合物的合成

取代邻硝基甲苯(1)、N,N-二甲基甲酰胺二甲基缩醛或二乙基缩醛和哌啶在溶剂N,N-二甲基甲酰胺中缩合制得取代的β-哌啶基-2-硝基甲苯(2), 2用铁粉和冰醋酸还原环合得到取代吲哚(3), 将3与三氯氧磷和N,N-二甲基甲酰胺通过Vilsmeier-Hacck反应制得了取代吲哚-3-甲醛类化合物4和5. 化合物4和5的结构经元素分析, IR和¹H NMR确认.     

Dilute solution properties of a polyurethane. I. Linear polymers

A linear polyurethane of high molecular weight was prepared in solution by the polyaddition of equimolar amounts of ethylene glycol and methylene bis(4-phenyl isocyanate). The polymer was fractionated by using a direct sequential extraction procedure, with a solvent–nonsolvent system consisting of N,N′-dimethylformamide (DMF) and acetone (A). The resulting fractions were characterized by viscosity and lightscattering measurements. The relationship between the intrinsic viscosity and molecular weight was found in DMF at 25°C. to be [η] = 3.64 × 10^?4M^0.71. The unperturbed polymer chain dimensions were determined from intrinsic viscosity measurements carried out under experimentally determined theta conditions.     

Competitive complexation in the copper(II) chloride-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylformamide-Aerosil system

Competitive complexation in the copper(II) chloride-N,N-dimethylformamide (DMF)-Aerosil system was studied by IR spectroscopy. It was found that adsorption from organic solutions containing copper(II) chloride and DMF resulted in the formation of the following three types of DMF complexes: self-associates of DMF, DMF complexes with surface hydroxyl groups, and DMF complexes with Cu(II) ions. The removal of DMF resulted in the sequential degradation of, initially, self-associates; next, complexes with silanol groups; and, finally, complexes with copper ions.Translated from Kinetika i Kataliz, Vol. 45, No. 6, 2004, pp. 917–920.Original Russian Text Copyright © 2004 by Golubeva, Zubareva.     

Quaternization of poly(tertiary aminostyrene)s and characterization of the quaternized polymers

The Menschutkin reaction of three poly(tertiary aminostyrene)s: poly(N,N-dimethyl-4-vinylphenylamine) (PPA), poly(N,N-dimethyl-4-vinylbenzylamine) (PBA), and poly(N,N-dimethyl-4-vinylphenethylamine) (PPTA) was investigated. These three polymers having narrow molecular weight distributions were prepared via anionic living polymerization. PPA reacted homogeneously with n-butyl bromide in N,N-dimethylformamide (DMF). PBA and PPTA also reacted homogeneously with n-butyl bromide in a mixture of DMF/methanol (75/25 v/v %). GPC measurement of the quaternized polymers was carried out using a mixture of water/acetonitrile (80/20 v/v %) containing 0.5M acetic acid and 0.3M sodium sulfate (pH = 2.9) as an eluant in order to suppress adsorption of the quaternized water soluble polymers on GPC gel. Results of GPC measurement indicate that the polymer chains of the three poly(tertiary aminostyrene)s are neither severed nor crosslinked in the process of quaternization. Temperature dependence and reaction time dependence on the degree of quaternization (DQ) were studied for PPT, PBA, and PPTA. By altering reaction time and temperature, the DQ values of the three poly(tertiary aminostyrene)s could be controlled in the range from 0% to nearly 100%. Quaternization reactivity of the amino groups in the three polymers was found to decrease in the order, PPTA, PBA, and PPA. The differences in reactivity are thought to be attributable to the electron density on the nitrogen atom of the N,N-dimethylamino group, and steric hindrance in the vicinity of the nitrogen atom. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1219–1226, 1997     

Orthophosphoric Acid-;N,N-Dimethylformamide System: IR Study

Interactions in the orthophosphoric acid (H₃PO₄)-;N,N-dimethylformamide (DMF) system are studied by IR Fourier spectroscopy. A mechanism of interaction between the H₃PO₄ and DMF molecules was proposed on the basis of the results and the earlier reported viscosimetry data for this system.     

Polymerization of styrene in N,N-dimethylformamide

The polymerization of styrene in N,N-dimethylformamide (DMF) at 60°C has been studied both in the presence and absence of 4,4′-azobis-4-cyanopentanoic acid (ACV). Rates of polymerization were measured dilatometrically and gravimetrically, and degrees of polymerization were determined viscometrically. There was some discrepancy in the values of the transfer constant to DMF, C_s, obtained by analysis of the results. The most reliable value appeared to be 9.8 × 10^?6, from experimental data obtained in the absence of added ACV.     

Interaction of poly(vinyl acetate) radical with iron (III) complexes

The polymerization of vinyl acetate in N,N-dimethylformamide (DMF) at 60°C initiated by AIBN in the presence of [Fe(DMF)₆](ClO₄)₃ and Fe(N₃)₃ had been studied. Fe(N₃)₃ was produced in situ by mixing solid sodium azide (NaN₃) and hexakis(N,N-dimethylformamide) iron (III) perchlorate, [Fe(DMF)₆](ClO₄)₃, in the ratio of 3:1. The velocity constant k_x for the interaction of poly(vinyl acetate) radical with [Fe(DMF)₆]³⁺ was found to be 1.44 × 10³L mol^?1 s^?1 and that for the interaction of poly(vinyl acetate) radical with Fe(N₃)₃ to be 3.44 × 10⁵ L mol^?1 s^?1 at 60°C.     

Synthesis,characterization, and solution properties of new heterocyclic tellurium compounds based on 5,6-dimethyl-1,3-dihydro-2-telluraindene

The synthesis and characterization of a new range of heterocyclic tellurium compounds based on 5,6-dimethyl-1,3-dihydro-2-telluraindene are reported. Conductivity measurements of most compounds in dimethylsulfoxide (DMSO) and N,N-dimethylformamide (DMF) showed considerable ionic character in both solvents. ¹H and ¹³C NMR studies indicated that the telluronium salts are stable to reductive elimination and no reaction between solute and solvent was observed. Benzyl and allyl telluronium salts are exceptional. Infrared and mass spectral data are reported and discussed.