The tris(picolinate)vanadate(II) ion: Redox properties and electron transfer kinetics with cobalt(III) amines

Vanadium(II) ions form with the pyridine-2-carboxylate ligand a deep blue, tris-substituted complex absorbing at 660 nm (ε = 7.2 × 10³ M^?1) cm^?1) with a shoulder at 450 nm. Reversible spectroelectrochemistry and cyclic voltammetry were observed for this complex, with E_{$\text{1}\text{2}$} = ?0.448 V vs NHE, and ΔS_rc^θ = ?6 cal · mol^?1 · deg^?1. Electron transfer kinetics with [CO(en)₃]³⁺ led to k₁₂ = 3100 M^?1 s^?, ΔH^≠ = 12.4 kcal · mol^?1 and ΔS^≠ = ?0.9 cal · mol^?1 · deg^?1 (I = 0.10 M). For the related [Co(NH₃)₆]³⁺ complex, k₁₃ = 1.9 × 10⁴ M^?1 s^?1. The self-exchange rate constant and activation parameters were analysed in terms of relative Marcus theory.     

Hydrodynamic properties and equilibrium rigidity of polyamidobenzimidazole molecules in dimethylacetamide and sulphuric acid

Translational diffusion, velocity sedimentation and viscometry of polyamidobenzimidazole (PABI) solutions in the range of M = (1–61) · 10³ have been investigated in N,N-dimethylacetamide (DMA) and 98% H₂SO₄. The dependences of D₀, S₀ and [η] on M were obtained. Tsvetkov-Klenin's hydrodynamic invariant was found to be $\text{A}{}_0\text{= 3.55 · 10}{}^{\mathrm{?10}}\text{erg deg}{}^{\mathrm{?1}}\text{mol}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>3</mtext>}}$. The equilibrium rigidity of PABI molecules was characterized by the length of the Kuhn segment $\text{A = 250 ± 100}\text{A}\text{?}$. The chain diameter was $\text{7 ± 4}\text{A}\text{?}$. The values of A in 98% H₂SO₄ and in an aprotic solvent, DMA, were virtually identical, implying that the rigid-chain conformation of PABI molecules in 98% H₂SO₄ is due to their geometrical structure rather than to the protonization of amide bonds. The significance of the latter evidently increases in PABI solutions in 100% H₂SO₄ in which A is 1.5 times as high. The decrease in rigidity of PABI as compared to that of poly-p-phenylene terephthalamide ($\text{A = 400 ± 100}\text{A}\text{?}$) is in reasonable agreement with the presence of imidazole rings in PABI molecules. The presence of these rings results in kinks in the PABI chain with angles of about 30° and hence, in the depature from parallelism of rotating bonds.     

Effects of composition on the solution properties of styrene–acrylonitrile copolymers

Short-range interactions between chain units of random copolymers in solution may be influenced by the composition or precisely by the distribution of sequence lengths of the same monomer units. Steric factors were derived for random copolymers of styrene and acrylonitrile with different compositions from the relation between the limiting viscosity number and the molecular weight. Mark-Houwink relations were obtained in methyl ethyl ketone (MEK) or in N,N′-dimethylformamide (DMF) at 30°C. for random copolymers containing 0.383 (Co-1) and 0.626 (Co-2) mole fraction of acrylonitrile, the expressions are: [η] = 3.6 X 10^?4 M _w^0.62, for Co-1 in MEK; [η] = 5.3 X 10^?4 M _w^0.61, for Co-2 in MEK; [η] = 1.2 × 10^?4M _w^0.77 for Co-2 in DMF. With the Stockmayer-Fixman expression, these correlations become, respectively: [η]/M^1/2 = 1.24 × 10^?3 + 8.0 × 10^?7 M^1/2; and [η]/M^1/2 = 1.70 × 10^?3 + 6.3 × 10^?7 M^1/2; and [η]/M^1/2 = 1.68 × 10^?3 + 31.3 × 10^?7 M^1/2. From the unperturbed mean-square end-to-end distances, 〈L²〉₀, determined from the first terms of the latter expressions, together with 〈L²〉_0f calculated by assuming the completely free rotation, gives the steric factor σ = (〈L²〉₀/〈L²〉_0f)^1/2 as 2.25 ± 0.05 for Co-1, and 2.31 ± 0.10 for Co-2. These values of σ are close to those for polystyrene (σ = 2.22 ± 0.05) and for polyacrylonitrile (σ = 2.20 ± 0.05). Therefore, it is concluded that the dimensions of random copolymers of styrene and acrylonitrile in solution are not significantly influenced by the composition. In other words, the unperturbed dimensions are not affected by a change in the alternation tendency between styrene units with phenyl side groups having a large molar volume and acrylonitrile units with nitrile groups responsible for the electrostatic interactions. On the other hand, the long-range interactions reflect the effect of sequence length. The Huggins constant and the second virial coefficient obtained from the light-scattering measurements have optimum values at about 0.5 mole fraction of acrylonitrile, where the greatest tendency for alternation seems to exist.     

Thermal decomposition of chlorofluoromethyl peroxynitrates

The thermal decomposition of CCl₃O₂NO₂,CCl₂FO₂NO₂, and CClF₂O₂NO₂ was studied in a temperature-controlled 420 l reaction chamber using in situ detection of peroxynitrates by long-path IR absorption. The temperature dependence of the unimolecular dissociation rate constants was determined at total pressures of 10 and 800 mbar in nitrogen as buffer gas, and the pressure dependence was measured at 273 K between 10 and 800 mbar. In Troe's notation, the data are represented by the following values for the limiting low and high pressure rate constants k₀/[N₂] and k_∞ and the fall-off curvature parameter F_c (in units of cm³ molecule^?1 s^?1, s^?1): CCl₃O₂NO₂,k₀/[N₂] = 6.3 × 10^?3 exp(?85.1 kJ · mol^?1/RT), k_∞ = 4.8 × 10¹⁶ exp(?98.3 kJ · mol^?1/RT), F_c = 0.22; CCl₂FO₂NO₂, k₀/[N₂] = 1.01× 10^?2 exp(?90.3 kJ · mol^?1/RT), k_∞ = 6.6 × 10¹⁶ exp(?101.8 kJ · mol^?1/RT), F_c = 0.28; and CClF₂O₂NO₂, k₀/[N₂] = 1.80 × 10^?3 exp(?87.3 kJ · mol^?1/RT), k_∞ = 1.60 × 10¹⁶exp(?99.7 kJ · mol^?1/RT), F_c = 0.30. From these dissociation rate constants and recently measured rate constants for the reverse reaction (see Caralp, Lesclaux, Rayez, Rayez, and Forst [19]), bond energies (=ΔH) of 100, 103, and 104 kJ/mol were derived for the RO₂–NO₂ bonds in CCl₃O₂NO₂, CCl₂FO₂NO₂, and CClF₂O₂NO₂, respectively. The kinetic and thermochemical parameters of these decomposition reactions are compared with those of the dissociation of other peroxynitrates. Atmospheric implications of the thermal stability of chlorofluoromethyl peroxynitrates are briefly discussed.     

Syntheses,crystal structures,and photoluminescence of two new coordination polymers derived from dicarboxylate and N-donor ligands

Two metal-organic coordination polymers, [Co(tda)(ip)(H₂O)₂] _n (1) and [Mn(tda)(ip)(H₂O)] _n (2) [H₂tda?=?thiophene-2,5-dicarboxylic acid, ip?=?1H-imidazo[4,5-f][1,10]-phenanthroline], have been synthesized and characterized by elemental analyses, IR, PXRD, and X-ray diffraction. Single-crystal X-ray analyses reveal that 2,5-tda is a bridging ligand, exhibiting two coordination modes to link metal ions: μ₁-η¹?:?η⁰/μ₁-η¹?:?η⁰ and μ₂-η¹?:?η¹/μ₁-η¹?:?η⁰. Compound 1 demonstrates a 1-D structure in which Co²⁺ centers are connected via tda anions into 1-D chains; the chains are further connected via hydrogen-bonding and π?···?π interactions. Compound 2 displays a 2-D structure in which tda connects two Mn ions forming a dinuclear molecule. In 2 the 3-D supramolecular structure arrays through hydrogen-bonding and π?···?π interactions. In addition, photoluminescence for 1 and 2 is also investigated in the solid state at room temperature.     

1，1－二氨基2，2－二硝基乙烯（DADE）的热化学性质、热行为和热分解机理

The constant-volume combustion energy, △cU （DADE, s, 298.15 K）, the thermal behavior, and kinetics and mechanism of the exothermic decomposition reaction of 1,1-diamino-2,2-dinitroethylene （DADE） have been investigated by a precise rotating bomb calorimeter, TG-DTG, DSC, rapid-scan fourier transform infrared （RSFT-IR） spectroscopy and T-jump/FTIR, respectively. The value of △cHm （DADE, s, 298.15 K） was determined as （-8518.09±4.59） j·g^-1. Its standard enthalpy of combustion, △cU （DADE, s, 298.15 K）, and standard enthalpy of formation, △fHm （DADE, s, 298.15 K） were calculated to be （-1254.00±0.68） and （- 103.98±0.73） kJ·mol^-1, respectively The kinetic parameters （the apparent activation energy Ea and pre-exponential factor A） of the first exothermic decomposition reaction in a temperature-programmed mode obtained by Kissinger＇s method and Ozawa＇s method, were Ek=344.35 kJ·mol^-1, AR= 1034.50 S^-1 and Eo=335.32 kJ·mol^-1, respectively. The critical temperatures of thermal explosion of DADE were 206.98 and 207.08 ℃ by different methods. Information was obtained on its thermolysis detected by RSFT-IR and T-jump/FTIR.     

Experimental and computational investigations on the high binding-selectivity of pyrimidine derivatives by a pillar[5]arene

The binding selectivity of an adenine-monofunctionalized pillar[5]arene (H) with a series of pyrimidine derivatives were investigated through ¹H NMR experiments and density functional theory (DFT) study. High binding-selectivity was demonstrated. Typically, H displayed very strong binding strength with 6-(2,4-dioxo-3, 4-dihydropyrimidin-1 (2H)-yl)hexanenitrile (G1) [K_a >10⁵ M^?1], up to about 3000-fold as compared with 1-hexylpyrimidine-2,4(1H, 3H)-dione (G5) [K_a = 31 M^?1]. The strong binding ability of H with G1 was due to the cooperative multiple hydrogen bond, dipole-dipole, C-H···π and π···π interactions. The high binding-selectivity was also verified by calculation results. The calculated interaction energy (ΔE_i) of G1?H was ?12.92 Kcal·mol^?1 while that of G5?H was ?2.85 Kcal·mol^?1.     

Kinetics and mechanism of the reduction of monochloramine by hydroxylamine and hydroxylammonium ion

The kinetics and mechanism by which monochloramine is reduced by hydroxylamine in aqueous solution over the pH range of 5–8 are reported. The reaction proceeds via two different mechanisms depending upon whether the hydroxylamine is protonated or unprotonated. When the hydroxylamine is protonated, the reaction stoichiometry is 1:1. The reaction stoichiometry becomes 3:1 (hydroxylamine:monochloramine) when the hydroxylamine is unprotonated. The principle products under both conditions are Cl^–, NH⁺₄, and N₂O. The rate law is given by ?[d[NH₂Cl]/dt] = k₊[NH₃OH⁺][NH₂Cl] + k₀[NH₂OH][NH₂Cl]. At an ionic strength of 1.2 M, at 25°C, and under pseudo‐first‐order conditions, k₊= (1.03 ± 0.06) ×10³ L · mol^?1 · s^?1 and k₀=91 ± 15 L · mol^?1 · s^?1. Isotopic studies demonstrate that both nitrogen atoms in the N₂O come from the NH₂OH/NH₃OH⁺. Activation parameters for the reaction determined at pH 5.1 and 8.0 at an ionic strength of 1.2 M were found to be ΔH? = 36 ± 3 kJ · mol^–1 and Δ S? = ?66 ± 9 J · K^?1 · mol^?1, and Δ H? = 12 ± 2 kJ · mol^?1 and Δ S? = ?168 ± 6 J · K^?1 · mol^?1, respectively, and confirm that the transition states are significantly different for the two reaction pathways. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 124–135, 2006     

4-硝基苯甲醇的低温热容和标准摩尔生成焓

用精密自动绝热量热计测定了4-硝基苯甲醇（4-NBA）在78 ~ 396 K温区的摩尔热容。其熔化温度、摩尔熔化焓及摩尔熔化熵分别为:(336.426 ± 0.088) K, (20.97 ± 0.13) kJ×mol-1 和 (57.24 ± 0.36) J×K-1×mol-1.根据热力学函数关系式,从热容值计算出了该物质在80 ~ 400 K温区的热力学函数值 [HT - H298.15 K] 和[ST - S298.15 K]. 用精密氧弹燃烧量热计测定了该物质在T＝298.15 K的恒容燃烧能和标准摩尔燃烧焓分别为 (C7H7NO3, s)＝- ( 3549.11 ± 1.47 ) kJ×mol-1 和 (C7H7NO3, s)＝- ( 3548.49 ± 1.47 ) kJ×mol-1. 利用标准摩尔燃烧焓和其他辅助热力学数据通过盖斯热化学循环, 计算出了该物质标准摩尔生成焓 (C7H7NO3, s)＝- (206.49 ± 2.52) kJ×mol-1 .     

Solvent effects on the activation parameters of the reaction between an α‐tocopherol analogue and dpph•: The role of H‐bonded complexes

The analysis of the activation parameters for the formal H‐atom transfer reaction between 2,2,5,7,8‐pentamethyl‐6‐chromanol (ChrOH) and 2,2‐diphenyl‐1‐picrylhydrazyl (dpph^?) reveals that these parameters are effective probes of the actual reaction mechanism. Indeed, the A factors measured in various polar and apolar solvents are localized in three distinct domains according to whether the reaction occurs via outer‐sphere electron transfer (ET) from the anion ChrO^? or hydrogen atom transfer (HAT). For instance, A = 5.9 × 10⁵ M^?1 s^?1 and E_a = 2.5 kcal mol^?1 in cyclohexane where the reaction proceeds by HAT, whereas in methanol, ethanol, and their mixtures with water where there is a substantial ET contribution A > 10⁹ M^?1s^?1 and E_a > 7 kcal mol^?1. Interestingly, in nonhydroxylic polar solvents, A～ 10⁷ M^?1s^?1 and the E_a values reflect the H‐bond accepting ability of the solvent in agreement with the “standard” kinetic solvent effects on HAT reactions. Addition of small quantities of pyridine accelerates the reaction rates in these solvents. This suggests that the H‐bonded complex (ChrOH···Py) is able to react via intermolecular ET with dpph^?. It is known, in fact, that pyridine lowers the oxidation potential of phenols by ～0.5 V and the ΔG_ET of ChrOH + dpph^? consequently decreases by about 10 kcal mol^?1. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 524–531, 2012     

On the evaluation of the nonisothermal kinetic parameters of (GeS2)0.3(Sb2S3)0.7 crystallization using the IKP method

The isoconversional method suggested by Friedman and the invariant kinetic parameters method (IKP) were used in order to examine the kinetics of the nonisothermal crystallization of (GeS₂)_0.3(Sb₂S₃)_0.7. The objective of the paper is to show the usefulness of the IKP method both for determining the activation parameters as well as the model of the investigated process. It was shown that the kinetic triplet [(E, A, f(α), where E is the activation energy, A is the preexponential factor, and f(α) is the differential function of conversion], which results through the application of the IKP method, depends on the set of kinetic models considered. For different sets of kinetic models, proportional values of f(α) are obtained. A criterion for the selection of this set, the use of which lead to the true kinetic triplet corresponding to the analyzed process (E = 163.2 kJ mol^?1; A = 2.47 × 10¹² min^?1 and the Avrami‐Erofeev model, A_m, for m = 2.5–2.6 was suggested. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 309–315, 2004     

Thermodynamic Studies of Bi-Univalent Electrolytes. VI. Thermodynamics of Cadmium Acetate from E. M. F. and Calorimetric Measurements

E. M. F. of the Cell, Cd-Hg (2-phase)/CdAc₂(m), Hg₂Ac₂(s)/Hg was measured at 20°, 25°, 30° and 40°C. The standard e. m. f. of the cell, Cd/CdAc₃(m), Hg₂Ac₂(c)/Hg was evaluated as E°=1.1500?11.09×10^?4T+1.06×10^?8T² The thermodynamic data of the reaction, Cd(c) + Hg₂Ac₂(c)=2Hg(l)+Cd⁺⁺(aq)+2Ac^?(aq) at 25°C were estimated as ΔF°=?42,139, ΔH°=?48,698 cal mole^?1 and ΔS°=?22.0 cal deg^?1 mole^?1 at 25°C. The thermodynamic data for the formation of Hg₂Ac₂(s) were evaluated as ΔF_f°=?202.3, ΔH_f°=?154.5 Kcal mole^?1 and S°=72.9 cal deg^?1 mole^?1. From measurements of the heats of solution of CdAc₂·2H₂O in aqueous solution, the relative partial molal enthalpies of cadmium acetate in aqueous solution were estimated.     

Kinetic Studies on the Reaction of Sodium Hexacyanoferrate（ll） Complex with Peroxydisulfate Anion

The oxidation of Na₄Fe(CN)₆ complex by S₂O anion was found to follow an outer‐sphere electron transfer mechanism. We firstly carried out the reaction at pH=1. The specific rate constants of the reaction, k_ox, are (8.1±0.07)×10^?2 and (4.3±0.1)×10^?2 mol^?1·L·s^?1 at μ=1.0 mol·L^?1 NaClO₄, T=298 K for pH=1 (0.1 mol·L^?1 HCl0₄) and 8, respectively. The activation parameters, obtained by measuring the rate constants of oxidation 283–303 K, were ΔH^≠=(69.0±5.6) kJ·mol^?1, ΔS^≠=(?0.34±0.041)×10² J·mol^?1·K^?1 at pH=l and ΔH^≠=(41.3±5.5) kJ·mol^?1, ΔS^≠=(?1.27±0.33)×10² J·mol^?1·K^?1 at pH=8, respectively. The cyclic voltammetry of Fe(CN) shows that the oxidation is a one‐electron reversible redox process with E_1/2 values of 0.55 and 0.46 V vs. normal hydrogen electrode at μ=1.0 mol·L^?1 LiClO₄, for pH=1 and pH=8 (Tris). respectively. The kinetic results were discussed on the basis of Marcus theory.     

Initiator efficiency of 2,2′‐azobis(isobutyronitrile) in bulk dodecyl acrylate free‐radical polymerizations over a wide conversion and molecular weight range

An Erratum has been published for this article in J. Polym. Sci. Part A: Polym. Chem. (2004) 42(21) 5559 . The initiator efficiency, f, of 2,2′‐azobis(isobutyronitrile) (AIBN) in dodecyl acrylate (DA) bulk free‐radical polymerizations has been determined over a wide range of monomer conversion in high‐molecular‐weight regimes (M_n ? 10⁶ g mol^?1 [? 4160 units of DA)] with time‐dependent conversion data obtained via online Fourier transform near infrared spectroscopy (FTNIR) at 60 °C. In addition, the required initiator decomposition rate coefficient, k_d, was determined via online UV spectrometry and was found to be 8.4 · 10^?6 s^?1 (±0.5 · 10^?6 s^?1) in dodecane, n‐butyl acetate, and n‐dodecyl acetate at 60 °C. The initiator efficiency at low monomer conversions is relatively low (f = 0.13) and decreases with increasing monomer to polymer conversions. The evolution of f with monomer conversion (in high‐molecular‐weight regimes), x, at 60 °C can be summarized by the following functionality: f^{60 °C} (x) = 0.13–0.22 · x + 0.25 · x² (for x ≤ 0.45). The reported efficiency data are believed to have an error of >50%. The ratio of the initiator efficiency and the average termination rate coefficient, 〈k_t±, (f/〈k_t〉) has been determined at various molecular weights for the generated polydodecyl acrylate (M_n = 1900 g mol^?1 (? 8 units of DA) up to M_n = 36,500 g mol^?1 (? 152 units of DA). The (f/〈k_t〉) data may be indicative of a chain length‐dependent termination rate coefficient decreasing with (average) chain length. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5170–5179, 2004     

Estimation of Dimerisation Constants from Complexatin-Induced Displacements of 1H-NMR Chemical Shifts: Dimerisation of Caffeine

The determination of the dimerisation constant (K^D) for the weak self-association of a compound C in dilute solution according to the equilibrium, 2C?C₂ is described. The method uses chemical shifts measured on a series of solutions of C at different concentrations: the optimum K^D is defined by a linear regression best-fit procedure, which simultaneously determines optimum values for δ_o and also for δ_∞, the intrinsic chemical shifts for nuclei in the monomer and dimer species. The dimerisation of caffeine in D₂O is used as a model to demonstrate the working of the method and the quality of results obtained. The most probable value of K_D for caffeine at 30.5° is found in the range 5.5–6.0 kg solution · mol^?1, and the enthalpy and entropy of dimerisation are found to be ΔH^? = ?15.1 kJ · mol^?1 and ΔS^? = ?35.3 J · °C^?1 · mol^?1, respectively. The influence of small errors in δ_o on the confidence limits of K^D is discussed.     

Non-isothermal Decomposition Kinetics, Specific Heat Capac-ity and Adiabatic Time-to-explosion of a High Energy Material: 4,6-Bis(5-amino-3-nitro-1,2,4-triazol-1-yl)-5-nitropyrimidine

The thermal behavior of 4,6‐bis‐(5‐amino‐3‐nitro‐1,2,4‐triazol‐1‐yl)‐5‐nitropyrimidine (BANTNP) was studied under a non‐isothermal condition by DSC, PDSC and TG/DTG methods. The kinetic parameters (E_a and A) of the exothermic decomposition reaction are 304.52 kJ·mol^?1 and 10^24.47 s^?1 at 0.1 MPa, 272.52 kJ·mol^?1 and 10^21.76 s^?1 at 5.0 MPa, respectively. The kinetic equation at 0.1 MPa can be expressed as: dα/dT=10^25.3(1?α)^3/4exp(?3.8044×10⁴/T)/β The critical temperature of thermal explosion is 588.28 K. The specific heat capacity of BANTNP was determined with a Micro‐DSC method, and the standard molar specific heat capacity is 397.54 J·mol^?1·K^?1 at 298.15 K. The adiabatic time‐to‐explosion of BANTNP was calculated to be 11.75 s.     

Molecular dimensions of polydipropylsiloxamer

The molecular dimensions of polydipropylsiloxamer were studied by intrinsic viscosity measurements in toluene and in 2-pentanone. The relationships between the molecualr weight and the intrinsic viscosity were found to be: [η]_25°C., toluene = 4.35 × 10^?4 M^0.58; [η]_θ(10°C.), toluene = 1.09 × 10^?3 M^0.5; [η]_θ(76°C.), 2-pentanone = 8.71 × 10^?4 M^0.5. This held reasonably well for molecular weights from 25,000 to 3000,000. The root-mean-square end-to-end length ratio, (r₀² /M)^1/2 as calculated from the constant K, exceeds the free rotation value by approximately 100%. The disparity is greater than that found with polydimethylsiloxamer, indicating a lower degree of flexibility for the polydipropylsiloxamer. This is largely due to the short range steric interaction between near neighboring units of the chain. Gel permeation chromatography was also employed to demonstrate the lower degree of flexibility for polydipropylsiloxamer as compared with polydimethylsiloxamer.     

Temperature dependence of limiting viscosity number and radius of gyration of cellulose diacetate in acetone

Acetone solutions of a cellulose diacetate fraction were studied by viscosity and light scattering methods over the range 12.6–50.3². The temperature dependences of the limiting viscosity number [η], the mean-square radius of gyration 〈s²〉, and the second virial coefficient A₂ were determined. The unperturbed mean-square radius of gyration 〈s²〉_o and the expansion factor α, were estimated by using theoretical relations to the interpenetration function. It was found that dln 〈s²〉_o/dT is ?6.4 × 10^?3 deg^?1, while α, is close to unity over the whole temperature range studied. The viscosity results are interpreted to show that the draining effect is not negligible and the Flory viscosity parameter Φ slightly increases with increasing temperature. It is finally concluded that the value of ?6.9 × 10^?3 deg^?1 for dln [η]/dT can be ascribable to the rapid decrease in 〈s²〉_o.     

Radical-initiated homo- and copolymerization of methoxymethyl methacrylate

The kinetics of methoxymethyl methacrylate (MOMA) homopolymerization has been investigated in benzene, using azobis(isobutyronitrile) as an initiator. The rate of polymerization (R_p) could be expressed by R_p = k[AIBN]^0.5 [MOMA]^1.19. The overall activation energy was calculated to be 73.2 kJ/mol. Kinetic constants for MOMA polymerization were obtained as follows: k_p/k_t^1/2 = 0.091 L^1/2 · mol^?1/2 · s^?1/2; 2fk_d = 1.37 × 10^?5 s^?1. The values of K and a in the Mark–Houwink equation, [η] = KM^a, where K = 5.89 × 10^?5 and a = 0.82 when M = M _n and the solvent was benzene. The relative reactivity ratios of MOMA (M₂) copolymerizations with styrene (r₁ = 0.40, r₂ = 0.58) were obtained. Applying the Q-e scheme led to Q = 0.78 and e = 0.67. The glass transition temperature (T_g) of poly(MOMA) was observed to be 64°C by DSC. Thermogravimetry of poly(MOMA) showed a 10% weight loss at 230°C in air.     

Trityl salt—initiated polymerization of α-methylstyrene

The initiation reaction of the polymerization of α-methylstyrene by trityl tetrachloroferate and tritylhexachloroantimonate in 1,2-dichloroethane at 20°C was studied. The rate constants were 14 × 10^?3 and 27 × 10^?3 L mol^?1s^?1, respectively. The dissociation constants of tritylterachloroferate (K_d = 0.88 × 10^?4M^?1) and tritylhexachloroantimonate (K_d = 2.64 × 10^?4M^?1) was determined. The effect of electron acceptors and donors on the dissociation equilibrium and initiation rate was investigated. It was shown that in strongly dissociated ion pairs such as stable carbenium salts the electron donors and acceptors have no appreciable effect on the magnitude of the dissociation. The temperature dependence of the rate constants in the ?20–+20°C range yielded the following thermodynamic parameters for trityltetrachloroferate: E_i = 8.54 kcal/mol; A = 3.2 × 10⁴ mol^?1s^?1; ΔH* = 8 kcal/mol; and S* = ?39.8 eu.