Host–Guest Complexes of some Stable Free Radicals

Hydrophobic host–guest complexes of some water soluble stable free radicals – potassium nitrosodisulfonate (Fremy's salt), 2-$p$-phenylsulphonic acid-2-phenyl-1-picrylhydrazyl (KSO₃-DPPH^.) and 2,2-p-phenylsulphonic acid-1-picrylhydrazyl ((KSO₃)₂DPPH^.), both of them as potassium salts, with 18-C-6, B18-C-6 and DB18-C-6 crown ethers, were obtained and characterised by elemental analysis, IR, ESR and UV-Vis.     

Predicting Stable Molecular Structures for (RNC)2AuIX Complexes

Calculations have been performed at the MP2 and DFT levels for investigating the reasons for the difficulties in synthesizing bis(isocyanide)gold(I) halide complexes. Three‐coordinated gold(I) complexes of the type (R₃P)₂Au^IX ( 1 ) can be synthesized, whereas the analogous isocyanide complexes (RNC)₂Au^IX ( 2 ) are not experimentally known. The molecular structures of (R₃P)₂Au^IX (X = Cl, Br, and I) and (RNC)₂Au^IX with X = halide, cyanide, nitrite, methylthiolate, and thiocyanate are compared and structural differences are discussed. Calculations of molecular properties elucidate which factors determine the strength of the gold‐ligand interactions in (RNC)₂Au^IX. The linear bonding mode of RNC favors a T‐shaped geometry instead of the planar Y‐shaped trigonal structure of (R₃P)₂Au^IX complexes that have been synthesized. An increased polarity of the Au–X bond in 2 leads to destabilization of the Y‐shaped structure. Chalcogen‐containing ligands or cyanide appear to be good X‐ligand candidates for synthesis of (RNC)₂Au^IX complexes.     

稳定自由基与五氟丙酸稀土双核配合物的合成与性能研究

合成并表征５种以２－（４’－氯苯基）－４，４，５，５－四甲基－３－氧化－１－氧自由基米唑桥联的新型五氟丙酸稀土（Ｎｄ，Ｇｄ，Ｄｙ，Ｈｏ，Ｅｒ）双核配合物，由Ｎｄ（Ⅲ），Ｄｙ（Ⅲ），Ｈｏ（Ⅲ）和Ｅｒ（Ⅲ）四种配合物的超灵敏跃迁，讨论了配合物的共价性随稀土离子原子序数增加而减弱的原因，对Ｇｄ（Ⅲ）配合物的变温（４～３００Ｋ）磁化率数据通过用最小二乘法与理论磁化率拟合，得交换积分Ｊ为正值，表明配合物中Ｇ     

Dimeric Palladium Complexes with Bridging Aryl Groups: When are they Stable?

Stable dimeric palladium(II ) complexes of general formula [Pd₂(μ‐R)₂(η³‐allyl)₂] (R=haloaryl, mesityl) have been prepared. Their X‐ray crystal structures, determined for some of the complexes, show that the two coordination square planes are usually coplanar. The haloaryl complexes are fluxional in solution, showing exchange between cis and trans isomers (relative to the orientation of the two allyl groups in the dimer) through solvent‐assisted associative bridge splitting. A number of other ancillary ligands (O,O, S,S, or C,N donors) failed to stabilize the bridging situation. Also, bridging phenyls were unstable. The reasons for this behavior and the formation of alternative compounds in attempts at synthesizing them are fully analyzed and explained. Stable aryl bridges seem to be favored by a combination of factors: the use of ancillary ligands of small size and lacking electron lone pairs, and the use of aryl ligands reluctant to homo and hetero C? C coupling. These seem to be more important factors in the stabilization of bridging aryl complexes than the strength of the bridges themselves.     

Platinum(II) Diaquadiammine Complexes. Stable Hydrolysis Products by DFT Quantum-Chemical Calculations

The most stable hydrolysis products of cis-[Pt(NH₃)₂(H₂O)₂]^{2 +} were revealed by means of DFT quantum-chemical calculations of this complex and its deprotonated forms with full geometry optimization. The resulting force fields and normal mode vibrations were used to calculate thermodynamic characteristics for possible hydrolysis stages and equilibrium constants for proton-transfer processes in the gas phase and in aqueous solutions. The hydroxo-bridged dimers [Pt(NH₃)₂(-OH)]₂ ^{2 +} with short Pt+++Pt distances are the hydrolysis products of platinum(II) cis-diaquadiamminates in the aqueous medium.     

Highly Luminescent and Stable Hydroxypyridinonate Complexes: A Step Towards New Curium Decontamination Strategies

The photophysical properties, solution thermodynamics, and in vivo complex stabilities of Cm^III complexes formed with multidentate hydroxypyridinonate ligands, 3,4,3‐LI(1,2‐HOPO) and 5‐LIO(Me‐3,2‐HOPO), are reported. Both chelators were investigated for their ability to act as antenna chromophores for Cm^III, leading to highly sensitized luminescence emission of the metal upon complexation, with long lifetimes (383 and 196 μs for 3,4,3‐LI(1,2‐HOPO) and 5‐LIO(Me‐3,2‐HOPO), respectively) and remarkable quantum yields (45 % and 16 %, respectively) in aqueous solution. The bright emission peaks were used to probe the electronic structure of the 5f complexes and gain insight into ligand field effects; they were also exploited to determine the high (and proton‐independent) stabilities of the corresponding Cm^III complexes (log β₁₁₀=21.8(4) for 3,4,3‐LI(1,2‐HOPO) and log β₁₂₀=24.5(5) for 5‐LIO(Me‐3,2‐HOPO)). The in vivo complex stability for both ligands was assessed by using ²⁴⁸Cm as a tracer in a rodent model, which provided a direct comparison with the in vitro thermodynamic results and demonstrated the great potential of 3,4,3‐LI(1,2‐HOPO) as a therapeutic Cm^III decontamination agent.     

Stable Singlet Biradicals of Rare-Earth-Fused Diporphyrin-Triple-Decker Complexes with Low Energy Gaps and Multi-Redox States

Dinuclear rare-earth (Tb^III, Y^III) triple-decker complexes with a fused diporphyrin (FP) and two tetraphenylporphyrin (TPP) ligands were synthesized in neutral, dianionic, and diprotonated forms. The neutral forms have large open shell biradical character, as determined from the temperature dependency of the magnetic susceptibility measurements and theoretical calculations. The coupling value (J=−1.4 kcal mol⁻¹, −487 cm⁻¹) of the radical centers in the neutral form of the Y^III complex indicates weak pairing interactions. Theoretical calculations on the neutral form reveal a significant biradical character (y=68 %). Furthermore, the Tb^III complex exhibits multi-redox states, having more than eight clear peaks in the voltammetry curves. The optical (3700 nm, 0.33 eV) and electrochemical measurements (3400 nm, 0.36 eV) indicate that the neutral form has very small HOMO–LUMO energy gap. Despite the large biradical character, the neutral complexes are thermally stable and do not decompose on heating at 120 °C. These complexes with unique characteristics are promising candidates for use in molecular electronics, optics, and spintronics.     

Tricyclometalated Iridium Complexes as Highly Stable Photosensitizers for Light‐Induced Hydrogen Evolution

The development of an efficient and stable artificial photosensitizer for visible‐light‐driven hydrogen production is highly desirable. Herein, a new series of charge‐neutral, heteroleptic tricyclometalated iridium(III) complexes, [Ir(thpy)₂(bt)] ( 1 – 4 ; thpy=2,2′‐thienylpyridine, bt=2‐phenylbenzothiazole and its derivatives), were systematically synthesized and their structural, photophysical, and electrochemical properties were established. Three solid‐state structures were studied by X‐ray crystallographic analysis. This design offers the unique opportunity to drive the metal‐to‐ligand charge‐transfer (MLCT) band to longer wavelengths for these iridium complexes. We describe new molecular platforms that are based on these neutral iridium complexes for the production of hydrogen through visible‐light‐induced photocatalysis over an extended period of time in the presence of [Co(bpy)₃]²⁺ and triethanolamine (TEOA). The maximum amount of hydrogen was obtained under constant irradiation over 72 h and the system could regenerate its activity upon the addition of cobalt‐based catalysts when hydrogen evolution ceased. Our results demonstrated that the dissociation of the [Co(bpy)₃]²⁺ catalyst contributed to the loss of catalytic activity and limited the long‐term catalytic performance of the systems. The properties of the neutral complexes are compared in detail to those of two known non‐neutral bpy‐type complexes, [Ir(thpy)₂(dtb‐bpy)]⁺ ( 5 ) and [Ir(ppy)₂(dtb‐bpy)]⁺ ( 6 ; ppy=2‐phenylpyridine, dtb‐bpy=4,4′‐di‐tert‐butyl‐2,2′‐dipyridyl). This work is expected to contribute toward the development of long‐lasting solar hydrogen‐production systems.     

Random Error Analysis in the Determination of Equilibrium Constants of Very Stable Metal Complexes.

Abstract

The analysis of random errors is discussed for the equilibrium constants of very stable metal complexes, determined through competitive potentiometric methods. Prior to this analysis the calculation of standard deviations both for overall and stepwise equilibrium constants is considered. Clues are given as to how a system can be properly characterized. To illustrate the error analysis, the following systems were selected: Cu(II) and L-2,6-diaminohexanoic acid (L-lysine); Cu(II) and ethylene diaminotetraacetic acid (EDTA); and Cu(II), EDTA and 1,2-dihydroxybenzene (catechol).     

Stable Anticancer Gold(III)–Porphyrin Complexes: Effects of Porphyrin Structure

In the design of physiologically stable anticancer gold(III) complexes, we have employed strongly chelating porphyrinato ligands to stabilize a gold(III) ion [Chem. Commun. 2003 , 1718; Coord. Chem. Rev. 2009 , 253, 1682]. In this work, a family of gold(III) tetraarylporphyrins with porphyrinato ligands containing different peripheral substituents on the meso‐aryl rings were prepared, and these complexes were used to study the structure–bioactivity relationship. The cytotoxic IC₅₀ values of [Au(Por)]⁺ (Por=porphyrinato ligand), which range from 0.033 to >100 μM , correlate with their lipophilicity and cellular uptake. Some of them induce apoptosis and display preferential cytotoxicity toward cancer cells than to normal noncancerous cells. A new gold(III)–porphyrin with saccharide conjugation [Au(4‐glucosyl‐TPP)]Cl ( 2 a ; H₂(4‐glucosyl‐TPP)=meso‐tetrakis(4‐β‐D ‐glucosylphenyl)porphyrin) exhibits significant cytostatic activity to cancer cells (IC₅₀=1.2–9.0 μM ) without causing cell death and is much less toxic to lung fibroblast cells (IC₅₀>100 μM ). The gold(III)–porphyrin complexes induce S‐phase cell‐cycle arrest of cancer cells as indicated by flow cytometric analysis, suggesting that the anticancer activity may be, in part, due to termination of DNA replication. The gold(III)–porphyrin complexes can bind to DNA in vitro with binding constants in the range of 4.9×10⁵ to 4.1×10⁶ dm³ mol^?1 as determined by absorption titration. Complexes 2 a and [Au(TMPyP)]Cl₅ ( 4 a ; [H₂TMPyP]⁴⁺=meso‐tetrakis(N‐methylpyridinium‐4‐yl)porphyrin) interact with DNA in a manner similar to the DNA intercalator ethidium bromide as revealed by gel mobility shift assays and viscosity measurements. Both of them also inhibited the topoisomerase I induced relaxation of supercoiled DNA. Complex 4 a , a gold(III) derivative of the known G‐quadruplex‐interactive porphyrin [H₂TMPyP]⁴⁺, can similarly inhibit the amplification of a DNA substrate containing G‐quadruplex structures in a polymerase chain reaction stop assay. In contrast to these reported complexes, complex 2 a and the parental gold(III)–porphyrin 1 a do not display a significant inhibitory effect (<10 %) on telomerase. Based on the results of protein expression analysis and computational docking experiments, the anti‐apoptotic bcl‐2 protein is a potential target for those gold(III)–porphyrin complexes with apoptosis‐inducing properties. Complex 2 a also displays prominent anti‐angiogenic properties in vitro. Taken together, the enhanced stabilization of the gold(III) ion and the ease of structural modification render porphyrins an attractive ligand system in the development of physiologically stable gold(III) complexes with anticancer and anti‐angiogenic activities.     

Formation and Crystal Structure of Stable Five‐coordinate Diorgano Cobalt(III) Complexes

The mer‐octahedral complexes(2‐carbonyl)(4‐Me)(6‐tBu)phenolato[C,O]hydridotris(trimethylphosphine)cobalt(III) ( 1 ) or ‐(1‐carbonyl)(2‐oxo)(1,2‐diphenylethene)[C,O]hydridotris(trimethylphosphine)cobalt(III) ( 2 ) via formal insertion of propynoic acid ethyl ester into Co‐H functions afford pentacoordinate vinylcobalt(III) 3 and 4 , respectively, that are diamagnetic and attain a square pyramidal structure as exemplified by an X‐ray diffraction analysis of 3 .     

Polymerization of rac‐Lactide Using Achiral Iron Complexes: Access to Thermally Stable Stereocomplexes

Enantiopure poly(lactic acid) (PLA) can form stereocomplexes when enantiomeric PLA chains are mixed in equivalent amounts. Such materials provide interesting features that might be suitable for numerous applications. Despite several advantages, the main drawback of PLA is its narrow window of processing, thus limiting its use for industrial applications. Reported herein are achiral iron complexes, that are highly active, productive, and stereoselective under mild reaction conditions for the ring‐opening polymerization of lactide. The corresponding catalytic systems enable the production of stereoblock polymers with high molecular weights, allowing the formation of thermally stable and industrially relevant stereocomplexes.     

Stable Actinide π Complexes of a Neutral 1,4‐Diborabenzene

The π coordination of arene and anionic heteroarene ligands is a ubiquitous bonding motif in the organometallic chemistry of d‐block and f‐block elements. By contrast, related π interactions of neutral heteroarenes including neutral bora‐π‐aromatics are less prevalent particularly for the f‐block, due to less effective metal‐to‐ligand backbonding. In fact, π complexes with neutral heteroarene ligands are essentially unknown for the actinides. We have now overcome these limitations by exploiting the exceptionally strong π donor capabilities of a neutral 1,4‐diborabenzene. A series of remarkably robust, π‐coordinated thorium(IV) and uranium(IV) half‐sandwich complexes were synthesized by simply combining the bora‐π‐aromatic with ThCl₄(dme)₂ or UCl₄, representing the first examples of actinide complexes with a neutral boracycle as sandwich‐type ligand. Experimental and computational studies showed that the strong actinide–heteroarene interactions are predominately electrostatic in nature with distinct ligand‐to‐metal π donation and without significant π/δ backbonding contributions.     

PIDAZTA: Structurally Constrained Chelators for the Efficient Formation of Stable Gallium-68 Complexes at Physiological pH

Two structurally constrained chelators based on a fused bicyclic scaffold, 4-amino-4-methylperhydro-pyrido[1,2-a][1,4]diazepin-N,N′,N′-triacetic acids [(4R*,10aS*)-PIDAZTA ( L1 ) and (4R*,10aR*)-PIDAZTA ( L2 )], were designed for the preparation of Ga^III-based radiopharmaceuticals. The stereochemistry of the ligand scaffold has a deep impact on the properties of the complexes, with unexpected [Ga( L2 )OH] species being superior in terms of both thermodynamic stability and inertness. This peculiar behavior was rationalized on the basis of molecular modeling and appears to be related to a better fit in size of Ga^III into the cavity of L2 . Fast and efficient formation of the Ga^III chelates at room temperature was observed at pH values between 7 and 8, which enables ⁶⁸Ga radiolabeling under truly physiological conditions (pH 7.4).     

Formation of Stable Rhodium η6‐Arene Complexes with Aniline Derivatives

Three new, hitherto unknown, rhodium complexes with aniline and two of its derivatives (2, 6‐dimethylaniline and N‐methylaniline) are presented. All complexes have been characterized by X‐ray analysis.