Three component ketocoumarin, amine, maleimide photoinitiator II

Three component photoinitiator systems containing N-substituted maleimide/ketocoumarin/tertiary amine have been used for the visible light photopolymerization of acrylate and thiol-ene monomers. Thin-film calorimetry studies were conducted. The polymerization exotherms of these systems with the blue (470 nm) and cyan (505 nm) LED light sources show that the multicomponent initiator package is an effective system for visible light polymerization of acrylate and thiol-ene monomers. Exotherms of a visible light initiator combination of camphorquinone/amine were recorded for comparison purposes.     

Cyclodextrin-centred star polymers synthesized via a combination of thiol-ene click and ring opening polymerization

The synthesis of cyclodextrin-centred star polymers via thiol-ene addition of per-6-thio-β-cyclodextrin (CD-(SH)(7)) with vinyl terminated polymers is described. The obtained thiol-ene product was employed as an initiator for ring opening polymerization (ROP) of ε-caprolactone (ε-CL).     

Studies on Thermal Polymerization of Acrylamide

Thermal polymerization of acrylamide has been followed by the DSC technique, and the activation energy (E) values at different stages of the fraction polymerized (a) have been determined from the exotherm of the thermograms obtained. The trend of variation of E with α shows that E remains constant up to α = 0.5 and decreases with a further increase in α. A close look at the composite nature of the exotherms, α-t, and α-T curves shows that the polymerization of acrylamide involves two processes. The first process is the formation of linear polyacrylamide and the second is the simultaneous cross-linking of the linear chains together with the formation of linear polyacrylamide. Experiments such as NH₃ detection by differential thermal analysis techniques and annealing studies have been made to shed further light on the polymerization process.     

Photocured thiol-ene based optical fluorescence sensor for determination of gold(III)

This study describes the preparation and the characterization of a new thiol-ene based polymeric fluorescence sensor by photo initiated polymerization of trimethylolpropane tris(3-mercaptopropionate), 2-hydroxyethylacrylate, and 2,4,6-triallyloxy-1,3,5-triazine which are used as monomers and also a photo initiator (2,2-dimethoxy-2-phenylacetophenone) for its usage as optical sensor for gold ions. The thiol-ene based polymeric membrane sensor was characterized by using attenuated total reflectance-fourier transform infrared spectroscopy (ATR-FTIR) and scanning electron microscopy (SEM). The response characteristics of the sensors including dynamic range, pH effect, response time, and the effect of foreign ions were investigated. Fluorescence spectra showed that the excitation/emission maxima of the membrane were at 379/425 nm, respectively     

Electro-optic properties of thiol-ene polymer stabilized ferroelectric liquid crystals

Electro-optic properties of polymer stabilized ferroelectric liquid crystal (PSFLC) systems are examined as a function of varying concentrations of either a linear or crosslinked thiol-ene polymer. The thiol-ene method of polymer stabilization is a drastic change from previous studies designed to avert the problem of polymer phase separation. FLC rise time and tilt angle measurements were used to determine the effects of the polymer network on the optical properties of the system. The addition of monomer impurities to both systems demonstrated a reduction in tilt angle, which translated into decreased switching speeds in both systems prior to polymerization. The crosslinked thiol-ene system showed increased switching times due to the creation of polymer in the interlayer spacing of the FLC, but exhibited minimal increase in the rotational viscosity of the system. In addition, the crosslinked polymer systems resulted in an increase in the liquid crystalline order, which produced an increase in the contrast ratio of the system. The linear polymer system showed drastically different results as compared with the crosslinked system. The rise time and tilt angle measurements decreased upon polymerization of the linear thiol-ene and the rotational viscosity and contrast ratio values also decreased. We suggest that the linear thiol-ene polymer phase separation from the interlayer spacing leads to a microscopic misalignment of the FLC molecules, causing a decrease in the optical properties of the LC.     

Electro-optic properties of thiol-ene polymer stabilized ferroelectric liquid crystals

Electro-optic properties of polymer stabilized ferroelectric liquid crystal (PSFLC) systems are examined as a function of varying concentrations of either a linear or crosslinked thiol-ene polymer. The thiol-ene method of polymer stabilization is a drastic change from previous studies designed to avert the problem of polymer phase separation. FLC rise time and tilt angle measurements were used to determine the effects of the polymer network on the optical properties of the system. The addition of monomer impurities to both systems demonstrated a reduction in tilt angle, which translated into decreased switching speeds in both systems prior to polymerization. The crosslinked thiol-ene system showed increased switching times due to the creation of polymer in the interlayer spacing of the FLC, but exhibited minimal increase in the rotational viscosity of the system. In addition, the crosslinked polymer systems resulted in an increase in the liquid crystalline order, which produced an increase in the contrast ratio of the system. The linear polymer system showed drastically different results as compared with the crosslinked system. The rise time and tilt angle measurements decreased upon polymerization of the linear thiol-ene and the rotational viscosity and contrast ratio values also decreased. We suggest that the linear thiol-ene polymer phase separation from the interlayer spacing leads to a microscopic misalignment of the FLC molecules, causing a decrease in the optical properties of the LC.     

Synthesis of new siloxane or sulfur containing symmetrical monomers based on carvone

Abstract

We demonstrated, that based on carvone, new symmetrical AA-type monomers with double bonds can be easily prepared by thiol-ene or Michael addition of dithiols. Moreover, hydrosilylation reaction with difunctional telehelic siloxane, containing Si-H groups was also studied. Obtained monomers are suitable for further polymerization by thiol-ene or hydrosilylation polyaddition.     

Structurally diverse polyamides obtained from monomers derived via the ugi multicomponent reaction

The combination of the Ugi four-component reaction (Ugi-4CR) with acyclic diene metathesis (ADMET) or thiol-ene polymerization led to the formation of poly-1-(alkylcarbamoyl) carboxamides, a new class of substituted polyamides with amide moieties in the polymer backbone, as well as its side chains. 10-Undecenoic acid, obtained by pyrolysis of ricinoleic acid, the main fatty acid of castor oil, was used as the key renewable building block. The use of different primary amines, as well as isonitriles (isocyanides) for the described Ugi reactions provided monomers with high structural diversity. Furthermore, the possibility of versatile post-modification of functional groups in the side chains of the corresponding polymers should be of considerable interest in materials science. The obtained monomers were polymerized by ADMET, as well as thiol-ene, chemistry and all polymers were fully characterized. Finally, ortho-nitrobenzylamide-containing polyamides obtained by this route were shown to be photoresponsive and exhibited a dramatic change of their properties upon irradiation with light.     

Metathesis polymerization of N-aryl norbornene dicarboximides. I

Metathesis polymerization of N-phenyl-exo-norbornene dicarboximide and ortho/meta/para methyl substituted phenyl nadimides was carried out using WCl₆/tetramethyltin. Structural characterization was done by FTIR, ¹H- and ¹³C-NMR. A mixture of cis and trans double bond structures were introduced in the backbone during polymerization. The cis content was higher (52 to 65%). In the DSC scan of poly(N-o-tolyl nadimide), two exotherms were observed at 240 and 270°C while in other samples only one exothermic transition was observed above 240°C. These exotherms disappeared in the second heating cycle. The T_g of the polymers, as determined in the second heating cycle, was highest in poly(N-o-tolyl nadimide) and lowest in poly(N-m-tolyl nadimide). The polymers were stable up to 443 ± 3°C and decomposed above this temperature in a single step. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2917–2924, 1997     

Bismaleimides chain-extended by imidized benzophenone tetracarboxylic dianhydride and their polymerization to high temperature matrix resins

Heat-resistant polymers were obtained by thermal polymerization of several bismaleimides or their substituted derivatives. The chain of the polymer precursors was extended by incorporation of imidized benzophenone tetracarboxylic dianhydride between the maleimide rings in order to impart a degree of flexibility in the polymers. The bismaleimides and their corresponding tetraamic acids were characterized by infrared (IR) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The differential thermal analysis (DTA) thermograms of the monomers showed exotherms at 200–340°C attributed to the thermally induced polymerization reactions. The influence of different substituents in the maleic double bond on the curing temperature was investigated. The thermal stability of the cured resins was evaluated by thermogravimetric analysis (TGA) and isothermal gravimetric analysis (IGA). They were stable up to 367–433°C both in nitrogen and air atmosphere and afforded 57–68% char yield at 800°C under anaerobic conditions. The structure of the aromatic and aliphatic diamines utilized for imidization was correlated with the thermal stability of the cured resins. The bismaleimide derived from p-phenylenediamine gave the most heat-resistant resin because of its higher rigidity.     

Preparation of amphiphilic graft copolymer with polyisoprene backbone by combination of anionic polymerization and “click” reaction

A novel graft copolymer consisting of polyisoprene backbone and hydrophilic side chain with carbamic acid ester functional group was prepared via thiol-ene"click"reaction and alcohol-isocyanate reactions.Polyisoprene was synthesized by anionic polymerization using n-butyl lithium as initiator,and the pendant hydroxyl groups were introduced by the thiol-ene reaction of mercaptoethanol with the double bond of 1,2-addition units of PI backbone in the presence of radical initiator azobisisobutyronitrile. Isocyanate end group capped poly(ethylene glycol)(mPEG-NCO) was grafted onto the PI backbone through alcoholisocyanate reaction between the pendant hydroxyl groups and isocyanate group of mPEG-NCO.The structure of the graft copolymer were characterized and confirmed by means of size-exclusion chromatography,~1H NMR and FTIR spectroscopy.     

Effects of Additives on the Laser-Initiated Polymerization of 1,6-Hexanediol Diacrylate

Polymerization exotherms of 1,6-hexanediol diacrylate (HDDA) were generated by a pulsed laser source and recorded on a modified differential scanning calorimeter. Several aromatic carbonyl-based photoinitiators were compared with respect to maximum rate and extent of polymerization in the absence and presence of oxygen. α-Cleavage photoinitiators were more efficient than the hydrogen-abstracting benzophenone. The addition of an amine to a photocleavable initiator improved the polymerization of HDDA under an inert atmosphere, whereas triarylphosphines under similar conditions were effective in reducing the air inhibition. This synergistic effect depends on the type and structure of the additive and the photoinitiator.

The use of benzophenone in combination with an α-cleavage photoinitiator showed no significant effect upon polymerization, while extra thermal energy imposed upon the system slightly improved the polymerization.     

Thiol-ene UV-curable coatings using vegetable oil macromonomers

Allyl, acrylate, and vinyl ether derivatives of castor oil were synthesized and blended with multifunctional thiols for evaluation as thiol-ene ultraviolet (UV) curable systems. The UV cured films were characterized and evaluated via ASTM tests, gel content, and dynamic mechanical analysis (DMA) as a function of time. Fourier transform infrared spectroscopy and DMA studies established that property advancement resulted from auto-oxidation, continued thiol-ene polymerization, or a combination of both mechanisms.     

Synthesis of thiol functionalized poly(meth)acrylates through enzymatic catalysis and a subsequent one pot reaction process

The synthesis and modification of thiol functionalized poly(meth)acrylates using a straightforward reaction concept that consists of an enzymatically catalyzed monomer synthesis, free radical polymerization and post-polymerization modification is presented. The well-known enzymatic transacylation of methyl acrylate and methyl methacrylate that runs under mild and environmentally friendly conditions was used to synthesize thiol protected acrylic and methacrylic monomers. Upon free radical polymerization and subsequent removal of protection groups, polymers with pendant thiol groups are obtained, which, in turn, can react in situ with Michael acceptors to form thiol-ene reaction products. The exceptional advantage of the proposed method is that upon removal of the enzyme from the monomer mixture, the polymerization, deprotection of thiols and subsequent Thio-Michael-type addition reaction can be conducted in one pot without purification of the intermediate products. Furthermore, the different reactivities of acetyl and benzoyl protection groups in lipase catalyzed reactions are discussed.     

Characterization of Composts and Humic Acids from Pulp and Paper Mill Biosludges by DSC in Association with FT-IR Spectroscopy

Samples of pulp and paper mill biosludges with different maturation ages (fresh biosludge and composts collected after 3 weeks, 1 year and 2 years of composting) and their corresponding humic acids were analyzed by thermal analysis with DSC in association with FT-IR spectroscopy. The DSC curves obtained exhibited endotherms in the low-temperature region, assigned to dehydration processes, exotherms at around 370°C, attributed to the loss of peptidic structures, and high-temperature exotherms, assigned to the loss of functional groups; the lignins were thermostable, regardless of the maturation age of the compost. The results obtained provided evidence that, during composting, the organic matter evolved in the direction of higher molecular complexity and stability, leading to a more homogeneous product closely resembling humic-like substances. This revised version was published online in July 2006 with corrections to the Cover Date.     

One-pot synthesis of hyperbranched poly(amido amine) clicked with a sugar shell via Michael addition polymerization and thiol click reaction

This paper reports the production of glycopolymers via a simple and flexible method. A novel glycopolymer with a hyperbranched poly(amido amine) core and a sugar shell (HPAA-GLc) was synthesized by using thiol-ene click reaction via facile one-pot method. Hyperbranched poly(amido amine) with vinyl terminals was first synthesized by Michael addition polymerization of N,N′-methylene bisacrylamide (MBA) with 1-(2-aminoethyl) piperazine (AEPZ). Subsequently, thiol-ene click reaction between vinyl units of hyperbranched poly(amido amine) and thio-glucose was performed in situ. Based on the NMR result, all the vinyl groups reacted with thiol-glucose in 120 min. Strong photoluminescence emission was observed from the aqueous solution of HPAA-GLc.     

Thiol-Ene Cationic and Radical Reactions: Cyclization,Step-Growth,and Concurrent Polymerizations for Thioacetal and Thioether Units

Thiol-ene cationic and radical reactions were conducted for 1:1 addition between a thiol and vinyl ether, and also for cyclization and step-growth polymerization between a dithiol and divinyl ether. p-Toluenesulfonic acid (PTSA) induced a cationic thiol-ene reaction to generate a thioacetal in high yield, whereas 2,2′-azobisisobutyronitrile resulted in a radical thiol-ene reaction to give a thioether, also in high yield. The cationic and radical addition reactions between a dithiol and divinyl ether with oxyethylene units yielded amorphous poly(thioacetal)s and crystalline poly(thioether)s, respectively. Under high-dilution conditions, the cationic and radical reactions resulted in 16- and 18-membered cyclic thioacetal and thioether products, respectively. Furthermore, concurrent cationic and radical step-growth polymerizations were realized using PTSA under UV irradiation to produce polymers having both thioacetal and thioether linkages in the main chain.     

Surface modification of polymeric microspheres using glycopolymers for biorecognition

We report the synthesis and characterization of sugar-containing microspheres consisting of poly(divinylbenzene) (PDVB) cores onto which chains of galactose- or mannose-bearing polymers have been grafted. PDVB particles prepared by distillation polymerization with a diameter of 2.4 μm containing residual surface vinyl groups were used as starting material. “Grafting from”, “grafting through” and “grafting to” techniques were performed and special interest was laid towards the resulting grafting densities. The surface modification via “grafting from” was conducted by reversible addition fragmentation chain transfer (RAFT) polymerization directly from the surface, whereas thiol-ene chemistry was used to affix glycopolymer chains onto the particle surface. The resulting sugar-covered microspheres were analyzed towards their protein recognition activity with a series of lectins.     

巯基-烯光点击反应辅助合成多官能度蓖麻油基聚氨酯丙烯酸酯

研究巯基-烯光点击反应辅助合成多官能度蓖麻油基聚氨酯丙烯酸酯。首先通过光引发的巯基-烯点击反应,于蓖麻油分子上引入巯基乙醇,形成多羟基化合物,然后加入丙烯酸羟丙酯与异佛尔酮二异氰酸酯,以物质的量为1:1反应得到端异氰酸酯丙烯酸酯,最终得到蓖麻油基聚氨酯丙烯酸酯。通过调节羟基含量可以得到不同官能度的丙烯酸酯。采用红外光谱、核磁氢谱、热重分析等手段表征其结构和性能,并测试了合成的聚氨酯丙烯酸脂的吸水率、附着力等性能,同时考察了它的热稳定性。结果表明, 在紫外光照射下,巯基和不饱和双键之间发生了加成反应;该聚合物的固化膜性能得到提高,尤其是硬度和热稳定性。由本文快速合成方法得到的树脂性能良好,具有较好的应用前景,扩大了巯基-烯光点击反应在高性能UV固化材料方面的应用范围。     

Soft-lithography fabrication of microfluidic features using thiol-ene formulations

In this work, a novel thiol-ene based photopolymerizable resin formulation was shown to exhibit highly desirable characteristics, such as low cure time and the ability to overcome oxygen inhibition, for the photolithographic fabrication of microfluidic devices. The feature fidelity, as well as various aspects of the feature shape and quality, were assessed as functions of various resin attributes, particularly the exposure conditions, initiator concentration and inhibitor to initiator ratio. An optical technique was utilized to evaluate the feature fidelity as well as the feature shape and quality. These results were used to optimize the thiol-ene resin formulation to produce high fidelity, high aspect ratio features without significant reductions in feature quality. For structures with aspect ratios below 2, little difference (<3%) in feature quality was observed between thiol-ene and acrylate based formulations. However, at higher aspect ratios, the thiol-ene resin exhibited significantly improved feature quality. At an aspect ratio of 8, raised feature quality for the thiol-ene resin was dramatically better than that achieved by using the acrylate resin. The use of the thiol-ene based resin enabled fabrication of a pinched-flow microfluidic device that has complex channel geometry, small (50 μm) channel dimensions, and high aspect ratio (14) features.