Living cationic polymerization of cis- and trans-ethyl propenyl ethers and synthesis of block copolymers with isobutyl vinyl ether

The cationic polymerization of cis- and trans-ethyl propenyl ethers (EPE, CH₃? CH?CH? O? C₂H₅), initiated by a mixture of hydrogen iodide and iodine (HI/I₂ initiator) at ?40°C in nonpolar media (toluene and n-hexane), led to living polymers of controlled molecular weights and a narrow molecular weight distribution (MWD) (M?_w/M?_n = 1.2–1.3). The geometrical isomerism of the monomer did not affect the living character of the polymerization. ¹³C NMR stereochemical analysis of the polymers showed that the living propagating end is sterically less crowded than nonliving counterparts generated by conventional Lewis acids (e.g., BF₃OEt₂). New block copolymers between EPE (cis or trans) and isobutyl vinyl ether were also prepared by sequential living polymerization of the two monomers.     

Living cationic polymerization of 2-vinyloxyethyl phthalimide: Synthesis of poly(vinyl ether) with pendant primary amino functions

Cationic polymerization of 2-vinyloxyethyl phthalimide ( 1 ) in CH₂Cl₂ at ?15°C with hydrogen iodide/iodine (HI/I₂) as initiator led to living polymers of a narrow molecular weight distribution (M?_w/M?_n = 1.1–1.25). The number-average molecular weight of the polymers was in direct proportion to monomer conversion and could be controlled in the range of 1000–6000 by regulating the 1 /HI feed ratio. However, when a fresh monomer was supplied to the completely polymerized reaction mixture, the molecular weight of the polymers was not directly proportional to monomer conversion. The polymerization of 1 by boron trifluoride etherate (BF₃OEt₂) in CH₂Cl₂ at ?78°C gave polymers with relatively high molecular weight (M?_w > 20,000) and broad molecular weight distribution (M?_w/M?_n ～ 2). The HI/I₂-initiated polymerization of 1 was an order of magnitude slower than that of ethyl vinyl ether, probably because of the electron-withdrawing phthalimide pendant. Hydrazinolysis of the imide functions in poly( 1 ) gave a water-soluble poly(vinyl ether) ( 3 ) with aliphatic primary amino pendants.     

Selective vinyl cationic polymerization of monomers with two cationically polymerizable groups. II. p-vinylphenyl glycidyl ether: An epoxy-functionalized styrene

p-Vinylphenyl glycidyl ether (VPGE), a styrene derivative with an epoxy pendant, was polymerized by various cationic initiators, and its selective vinyl polymerization was investigated at low temperatures below ?15°C. BF₃OEt₂ (a metal halide) and CF₃SO₃H (a strong protonic acid) polymerized both vinyl and epoxy groups of VPGE, and produced cross-linked insoluble polymers. The HI/I₂ initiating system and iodine, in contrast, polymerized its vinyl group in polar solvents (CH₂Cl₂ and nitroethane) highly selectively in the temperature range of ?15 to ?40°C to give soluble polymers with a polystyrene backbone and epoxy pendants; however, under these conditions, 10–15% of the epoxy groups of the polymers were consumed during the polymerization by the reaction with the growing species. The polymerization by HI/I₂ in CH₂CI₂ involved a long-lived propagating species, as indicated by a progressive increase in the molecular weight (M?_n) of the polymers with monomer conversion and their fairly narrow molecular weight distributions (M?_w/M?_n ～ 1.6). The differences between the polymerizations of VPGE and p-isopropenylphenyl glycidyl ether, an α-methylstyrene-type counterpart of VPGE, were also discussed with an emphasis on the effects of the α-methyl group in the latter monomer.     

Living cationic polymerization of ethyl 2-(vinyloxy)ethoxyacetate: A vinyl ether with an ether and an ester function in the pendant

Ethyl 2-(vinyloxy)ethoxyacetate ( 4 ; CH₂?CH? OCH₂CH₂OCH₂? COOC₂H₅), a vinyl ether having both carboxylic acid ester and oxyethylene unit in its pendant, afforded well-defined living polymers when polymerized by the hydrogen iodide/iodine (HI/I₂) initiating system in toluene at ?40°C. The polymers possessed a narrow molecular weight distribution (M _w/M _n ≤ 1.15), and their molecular weight (M _n) increased proportionally to monomer conversion or the molar ratio of the monomer to hydrogen iodide. The polymer molecular weight also increased upon addition of a fresh feed of the monomer to a completely polymerized reaction mixture. Polymers of high molecular weights (M _n > 5 × 10⁵) and broad molecular weight distributions were obtained by BF₃OEt₂ in toluene at ?40°C. Polymerization rate of 4 with HI/I₂ is ca. 100 times greater than that of the corresponding alkyl vinyl ether, and thus 4 was found to be one of the most reactive vinyl ethers thus far studied. Alkaline hydrolysis of the pendant ester groups of the polymers gave a vinyl ether-based polymeric carboxylic acid 6 with a narrow molecular weight distribution.     

Living cationic polymerization of vinyl ethers with a functional group. VII. Polymerization of vinyl ethers with a silyloxyl group and synthesis of polyalcohols and related functional polymers

Living cationic polymerizations of two silicon-containing vinyl ethers, 2-(t-butyldimethyl-silyloxyl)ethyl vinyl ether (tBuSiVE) and 2-(trimethylsilyloxyl)ethyl vinyl ether (MeSiVE), have been achieved with use of the hydrogen iodide/iodine (HI/I₂) initiating system in toluene at ?15 or ?40°C, despite the existence of the acid-sensitive silyloxyl pendants. The living nature of the polymerizations was demonstrated by linear increases in the number-average molecular weights (M?_n) of the polymers in direct proportion to monomer conversion and by their further rise upon addition of a second monomer feed to a completely polymerized reaction mixture. The polymers obtained in these experiments all exhibited very narrow molecular weight distributions (MWD) with M?_w/M?_n around or below 1.1. Desilylation of the polymers under mild conditions (with H⁺ for MeSiVE and F^? for tBuSiVE) gave poly(2-hydroxyethyl vinyl ether), a water-soluble polyalcohol with a narrow MWD. The living processes also permitted clean syntheses of amphiphilic AB block copolymers and water-soluble methacrylate-type macromonomers, all of which bear narrowly distributed segments of the polyalcohol derived from the silicon-containing vinyl ethers.     

Living polymerization of isobutyl vinyl ether by HI/I2 initiator in polar solvents

This study has shown a nearly perfect living polymerization of isobutyl vinyl ether (IBVE) to proceed not only in nonpolar media (e.g., n-hexane) but in relatively polar CH₂Cl₂ solvent, provided that the HI concentration is sufficiently high. The produced polymers had a nearly monodisperse molecular weight distribution (M _w/M _n ≤ 1.1); the number-average molecular weight (M _n) increased in direct proportion to IBVE conversion and its increase continued on the addition of a fresh feed of the monomer at the end of the polymerization. The use of a more polar medium (PhNO₂/CH₂Cl₂) or a lower HI concentration leads to chain transfer reactions, by promoting the ionic dissociation of the “nondissociated” living propagating species. The successful living polymerization by HI/I₂ in CH₂Cl₂ indicates a very strong interaction between the iodide anion and the growing end.     

Vinyl ethers with a functional group: Living cationic polymerization and synthesis of monodisperse polymers

The living cationic polymerization of vinyl ethers (VEs) having a (polar) functional pendant has been achieved by the hydrogen iodide/iodine (HI/I₂) initiating system to give polymers with a very narrow molecular weight distribution (MWD) (M_w/M_n ≤ 1.2). The functional pendants include benzyl, saturated or unsaturated ester, (poly) oxyethylene, and substituted phenoxyl groups. Although these polar groups often disturb cationic vinyl polymerization by inducing chain transfer and termination, the HI/I₂ initiator cleanly polymerized the “functionalized” VEs without side reactions, mostly in nonpolar media at low temperatures below −15 °C. The HI/I₂-initiated living polymerization also provided facile methods to synthesize new functional polymers, including water-soluble polymers, macromolecular amphiphiles, and macromers, all having a narrow MWD. The simplest example is the living polymerization of VEs carrying an oxyethylene chain [-(CH₂CH₂O)_n-R] as pendant, which directly yields water-soluble polymers. The debenzylation of poly(benzyl VE) prepared with HI/I₂ led to poly(vinyl alcohol). Polymers of the saturated ester-containing monomers (2-acetoxyethyl and 2-benzoyloxyethyl VEs) were readily hydrolyzed into poly (2-hydroxyethyl VE), soluble in water and swellable in methanol. This lead was extended to the synthesis of a new amphiphile, poly(cetyl VE-b-2-hydroxyethyl VE), from a block copolymer of cetyl and 2-acetoxyethyl VEs prepared by their sequential living polymerization initiated with HI/I₂. An adduct between HI and 2-vinyloxyethyl methacrylate [CH₃-CH(I)-OCH₂CH₂OCOC(CH₃) =CH₂] was found to initiate living polymerizations of VEs in the presence of iodine; the products were methacrylate-type macromers carrying a poly(VE) side chain with a narrow chain-length distribution.     

Selective vinyl cationic polymerization of monomers with two cationically polymerizable groups. I. p-isopropenylphenyl glycidyl ether: An epoxy-functionalized α-methylstyrene

p-Isopropenylphenyl glycidyl ether (IPGE), a monomer of dual cationic functionality (isopropenyl and epoxy), was polymerized by a variety of initiators, and optimum conditions were established for its selective vinyl cationic polymerization. The hydrogen iodide/iodine (HI/I₂) initiating system or iodine polymerized selectively the isopropenyl group in CH₂Cl₂ at a low temperature (?78°C), to produce soluble poly(IPGE) with epoxy pendants. Under these conditions, the number-average molecular weight of the polymers was inversely proportional to the initial initiator concentration, indicating the formation of long-lived propagating species. Soluble poly(IPGE) was also obtained at ?15 and ?40°C by HI/I₂ or iodine. However, at these higher temperatures, transfer and/or termination reactions took place to give olefin-terminated polymers, in which some of the pendant epoxy groups were consumed. BF₃OEt₂ (a metal halide) and CF₃SO₃H (a strong protonic acid) polymerized both epoxy and isopropenyl groups of IPGE and yielded crosslinked insoluble polymers.     

Living cationic polymerization of 2‐adamantyl vinyl ether

Living cationic polymerization of 2‐adamantyl vinyl ether (2‐vinyloxytricyclo[3.3.1.1]^3,7decane; 2‐AdVE) was achieved with the CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride/ethyl acetate [CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5/CH₃COOEt] initiating system in toluene at 0 °C. The number‐average molecular weights (M_n's) of the obtained poly(2‐AdVE)s increased in direct proportion to monomer conversion and produced the polymers with narrow molecular weight distributions (MWDs) (M_w/M_n = ～1.1). When a second monomer feed was added to the almost polymerized reaction mixture, the added monomer was completely consumed and the M_n's of the polymers showed a direct increase against conversion of the added monomer. Block and statistical copolymerization of 2‐AdVE with n‐butyl vinyl ether (CH₂?CH? O? CH₂ CH₂CH₂CH₃; NBVE) were possible via living process based on the same initiating system to give the corresponding copolymers with narrow MWDs. Grass transition temperature (T_g) and thermal decomposition temperature (T_d) of the poly(2‐AdVE) (e.g., M_n = 22,000, M_w/M_n = 1.17) were 178 and 323 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1629–1637, 2008     

Living cationic polymerization of isobutyl vinyl ether by EtAlCl2 in the presence of ether additives: Cyclic ethers,cyclic formals,and acyclic ethers with oxyethylene units

The living cationic polymerization of isobutyl vinyl ether (IBVE) was investigated in the presence of various cyclic and acyclic ethers with 1-(isobutoxy)ethyl acetate [CH₃CH(OiBu)OCOCH₃, 1 ]/EtAlCl₂ initiating system in hexane at 0°C. In particular, the effect of the basicity and steric hindrance of the ethers on the living nature and the polymerization rate was studied. The polymerization in the presence of a wide variety of cyclic ethers [tetrahydrofuran (THF), tetrahydropyran (THP), oxepane, 1,4-dioxane] and cyclic formals (1,3-dioxolane, 1,3-dioxane) gave living polymers with a very narrow molecular weight distribution (MWD) (M?_ω/M?_n ≤ 1.1). On the other hand, propylene oxide and oxetane additives resulted in no polymerization, whereas 1,3,5-trioxane gave the nonliving polymer with a broader MWD. The polymerization rates were dependent on the number of oxygen and ring sizes, which were related to the basicity and the steric hindrance. The order of the apparent polymerization rates in the presence of cyclic ether and formal additives was as follows: nonadditive ～ 1,3,5-trioxane ? 1,3-dioxane > 1,3-dioxolane ? 1,4-dioxane ? THP > oxepane ? THF ? oxetane, propylene oxide ? 0. The polymerization in the presence of the cyclic formals was much faster than that of the cyclic ethers: for example, the apparent propagation rate constant k in the presence of 1,3-dioxolane was 10³ times larger than that in the presence of THF. Another series of experiments showed that acyclic ethers with oxyethylene units were effective as additives for the living polymerization with 1 /EtAlCl₂ initiating system in hexane at 0°C. The polymers obtained in the presence of ethylene glycol diethyl ether and diethylene glycol diethyle ether had very narrow molecular weight distribution (M?_ω/M?_n ≤ 1.1), and the M?_n was directly proportional to the monomer conversion. The polymerization behavior was quite different in the polymerization rates and the MWD of the obtained polymers from that in the presence of diethyl ether. These results suggested the polydentate-type interaction or the alternate interaction of two or three ether oxygens in oxyethylene units with the propagating carbocation, to permit the living polymerization of IBVE. © 1994 John Wiley & Sons, Inc.     

Selective vinyl cationic polymerization of monomers with two cationically polymerizable groups. III. 2-vinyloxyethyl glycidyl ether: An epoxy-functionalized vinyl ether

Cationic polymerization of 2-vinyloxyethyl glycidyl ether (VEGE), a vinyl ether with an epoxy group, was conducted with various initiators in CH₂Cl₂ in the temperature range from +15 to ?78°C, and the possibility of its selective vinyl polymerization was investigated. BF₃OEt₂ polymerized both vinyl and epoxy groups of VEGE to yield polymers partially insoluble in organic solvents. HI/I₂, iodine, and CF₃SO₃H gave soluble, low-molecular-weight oligomers with epoxy pendants. ¹H-NMR structural analysis of the oligomeric products showed that the epoxy/vinyl ratio of the pendants decreases in the order: 100% epoxy ～ CF₃SO₃H > HI/I₂ ～ I₂ ? BF₃OEt₂. Although HI/I₂ or iodine mainly polymerized the vinyl group, the reaction of the vinyl ether-type growing end with an epoxy group of VEGE took place during the polymerization, so that the monomer conversion leveled off at about 40%.     

End-Functionalized polymers by living cationic polymerization. IV. Poly(vinyl ethers) with acidic or basic terminal groups by functional initiator method

Carboxylic acid or primary amine-terminated poly(isobutyl vinyl ethers) were synthesized by living cationic polymerizations with functionalized initiators (CH₃CHIO? CH₂CH₂ ? X; X: that are the adducts of the corresponding vinyl ethers (CH₂ ? CH ? OCH₂CH₂? X) with hydrogen iodide. In the presence of iodine, these initiators induced living cationic polymerization of isobutyl vinyl ether to give polymers with the α-end group of X originating from the initiators. The polymer molecular weights were regulated by the monomer to initiator feed ratio and the molecular weight distributions were very narrow (M _w/M _n ≤ 1.15). Subsequent deprotection of the terminal group X led to polymers with a terminal carboxylic acid or primary amine. ¹H- and ¹³C-NMR analyses showed that the end functionalities of these polymers were all close to unity.     

Living cationic polymerization of vinyl ether with a cyclic acetal group

The living cationic polymerization of 5‐ethyl‐2‐methyl‐5‐(vinyloxymethyl)‐1,3‐dioxane ( 1 ), a vinyl ether with a cyclic acetal unit, was investigated with various initiating systems in toluene or methylene chloride at 0 to ?30 °C. With initiating systems such as hydrogen chloride (HCl)/zinc chloride (ZnCl₂), isobutyl vinyl ether–acetic acid adduct [CH₃CH(OiBu)OCOCH₃]/tin tetrabromide (SnBr₄)/di‐tert‐butylpyridine (DTBP), and CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride (Et_1.5AlCl_1.5)/ethyl acetate (CH₃COOEt), the number‐average molecular weights (M_n's) of the obtained poly( 1 )s increased in direct proportion to the monomer conversion and produced polymers with relatively narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.2–1.3]. To investigate the living nature of the polymerization with CH₃CH(OiBu)OCOCH₃/SnBr₄/DTBP, a second monomer feed was added to the almost polymerized reaction mixture. The added monomer was completely consumed, and the M_n values of the polymers showed a direct increase against the conversion of the added monomer, indicating the formation of a long‐lived propagating species. The glass transition temperature and thermal decomposition temperature of poly( 1 ) (e.g., M_n = 13,600, M_w/M_n = 1.30) were 29 and 308 °C, respectively. The cyclic acetal group in the pendants of the polymer of 1 could be converted to the corresponding two hydroxy groups in a 65% yield by an acid‐catalyzed hydrolysis reaction. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4855–4866, 2007     

Fluorine‐containing vinyl ether polymers: Living cationic polymerization in fluorinated solvents as new media and unique solubility characteristics in organic solvents

Living cationic polymerization of fluorine‐containing vinyl ethers [CH₂?CH? O? C₂H₄? O? C₃H₆? C_nF_2n+1: 5FVE (n = 2), 13FVE (n = 6)] was investigated in various solvents with a CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5 initiating system in the presence of an added base. 5FVE was polymerized quantitatively in toluene at 0 °C, and the obtained polymers had predetermined molecular weights with narrow molecular weight distributions (M_w/M_n < 1.1). On the other hand, for the polymerization of 13FVE, the product polymers precipitated due to their extremely poor solubility in nonfluorinated organic solvents. Therefore, fluorinated solvents such as hydrochlorofluorocarbons, hydrofluorocarbons, hydrofluoroethers, or α,α,α‐trifluorotoluene, as‐yet uninvestigated for cationic polymerization, were employed. In these solvents, living polymerization was achieved even with 13FVE, yielding well‐defined polymers (M_w/M_n < 1.1, by size exclusion chromatography using a fluorinated solvent as an eluent). The solvents were also shown to be good for living polymerization of isobutyl vinyl ether. The obtained fluorine‐containing polymers underwent temperature‐responsive solubility transitions in organic solvents. Poly(5FVE) showed sensitive upper critical solution temperature (UCST)‐type phase separation behavior in toluene. Copolymers of 13FVE and isobutyl vinyl ether showed UCST‐type phase separation in common organic solvents with different polarities depending on their composition, while a homopolymer of 13FVE was insoluble in all nonfluorinated organic solvents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Cationic polymerization of p-methylstyrene initiated by acetyl perchlorate: An approach to living polymerization

The cationic polymerization of p-methylstyrene initiated by acetyl perchlorate at ?78°C led to long-lived (living-like) polymers with a narrow molecular weight distribution (M?_w/M?_n = 1.1–1.4) in methylene chloride containing a common ion salt (n-Bu₄NClO₄) or in a less polar solvent (CH₂Cl₂/toluene, 1/4v/v). Under these conditions, the number-average molecular weight (M?_n) of the polymers increased in proportion to monomer conversion and was regulated by the monomer-to-initiator ratio. When fresh feeds of the monomer were repeatedly added to a completely polymerized solution, the polymerization ensued at the same rate as before and the linear increase in M?_n with monomer conversion continued. The effects of solvent polarity and the common ion salt on the polymerization showed the suppression of the ionic dissociation of the propagating species, resulting in a “nondissociated species,” to be the key factor for the formation of the long-lived polymers.     

Selective vinyl cationic polymerization of monomers with two cationically polymerizable groups. IV. New initiating systems for selective and living polymerization of p-isopropenylphenyl glycidyl ether

A variety of cationic initiators were employed for p-isopropenylphenyl glycidyl ether (IPGE), an α-methylstyrene derivative with an epoxy pendant, and optimum initiators and reaction conditions were evaluated in terms of its selective vinyl polymerization and living polymerization. Despite the coexistence of two cationically polymerizable groups in IPGE, binary initiating systems (HI, CF₃COOH, or CH₃CH(OiBu)-OCOCH₃, each coupled with ZnI₂) and sulfonic acids (CF₃SO₃H and CH₃SO₃H) selectively polymerized the vinyl group of IPGE in CH₂Cl₂ at ?78°C to produce soluble polymers with epoxy pendant groups in high yield. Metal halides (BF₃OEt₂ and AlEtCl₂) polymerized both the vinyl and epoxy groups of IPGE to give crosslinked insoluble polymers. In contrast, under these conditions, the HI/ZnI₂ system also led to a long-lived polymer, the molecular weight of which increased upon addition of a fresh feed of monomer to a completely polymerized reaction mixture, whereas the use of other initiators resulted in nonliving polymers. At higher temperatures (?40 and ?15°C), soluble poly(IPGE) was also obtained with HI/ZnI₂, but the polymer yield decreased with raising temperature, because of the occurrence of termination reaction.     

Star-shaped polymers by living cationic polymerization. VII. Amphiphilic graft polymers of vinyl ethers with hydroxyl groups: Synthesis and host–guest interaction

Amphiphilic graft polymers of vinyl ethers (VEs) ( 6 ) where each branch consists of a hydrophilic polyalcohol and a hydrophobic poly(alkyl vinyl ether) segment were prepared on the basis of living cationic polymerization, and their properties and functions were compared with the corresponding amphiphilic star-shaped polymers. In toluene at ?15°C, the HI/ZnI₂-initiated living block polymer 2 of an ester-containing VE (CH₂? CHOCH₂CH₂OCOCH₃) and isobutyl VE (IBVE) was terminated with the diethyl 2-(vinyloxy)ethylmalonate anion [ 3 ; ^ΦC(COOEt)₂CH₂CH₂OCH ? CH₂] ( 2/3 = 1/2 mole ratio) to give a macromonomer ( 4 ), H[CH₂CH(OCH₂CH₂OCOCH₃)] _m-[CH₂CH(OiBu)]_n? C(COOEt)₂CH₂CH₂OCH ? CH₂ (m = 5, n = 15; M?_n = 2600, M?_w/M?_n = 1.13, 1.10 vinyl groups/chain). Subsequently, 4 was homopolymerized with HI/ZnI₂ in toluene at ?15°C. In 3 h, 85% of 4 was consumed and a graft polymer ( 5 ) was obtained [M?_w = 15000, DP_n (for 4 ) = 6]. The apparent M?_w (10,900) of 5 by size-exclusion chromatography (SEC) is smaller than that by light scattering as well as that (18,300) by SEC of the corresponding linear polymer with the almost same molecular weight, indicating the formation of a multi-branched structure. Hydrolysis of the pendant esters in 5 gave the amphiphilic graft polymer 6 where each branch consists of a hydrophilic polyalcohol and a hydrophobic poly(IBVE) segment. The graft polymer 6 was found to interact specifically with small organic molecules (guests) with polar functional groups, and 6 differed in solubility and host-guest interaction from the corresponding star-shaped polymer. © 1993 John Wiley & Sons, Inc.     

Polymerization of 2‐pentene with Ni(II) α‐diimine complex/M‐MAO catalyst and structure of the polymer

Polymerization of 2‐pentene with [ArN?C(An)C(An)·NAr)NiBr₂ (Ar?2,6‐iPr₂C₆H₃)] ( 1‐Ni) /M‐MAO catalyst was investigated. A reactivity between trans‐2‐pentene and cis‐2‐pentene on the polymerization was quite different, and trans‐2‐pentene polymerized with 1‐Ni /M‐MAO catalyst to give a high molecular weight polymer. On the other hand, the polymerization of cis‐2‐butene with 1‐Ni /M‐MAO catalyst did not give any polymeric products. In the polymerization of mixture of trans‐ and cis‐2‐pentene with 1‐Ni /M‐MAO catalyst, the M_n of the polymer increased with an increase of the polymer yields. However, the relationship between polymer yield and the M_n of the polymer did not give a strict straight line, and the M_w/M_n also increased with increasing polymer yield. This suggests that side reactions were induced during the polymerization. The structures of the polymer obtained from the polymerization of 2‐ pentene with 1‐Ni /M‐MAO catalyst consists of ? CH₂? CH₂? CH(CH₂CH₃)? , ? CH₂? CH₂? CH₂? CH(CH₃)? , ? CH₂? CH(CH₂CH₂CH₃)? , and methylene sequence ? (CH₂)_n? (n ≥ 5) units, which is related to the chain walking mechanism. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2858–2863, 2008     

Living cationic polymerization of vinyl ethers with carboxylic acid/tin tetrahalide initiating systems. II. Effects of steric hindrance of carboxylate counteranions

Effects of steric crowding of the substituent of carboxylate counteranions on living cationic polymerization of isobutyl vinyl ether (IBVE) were investigated with the use of two series of carboxylic acids with various carbonyl substituents [RCOOH; R = (aliphatic series) CH₃CH₂, (CH₃)₂CH, (CH₃)₃C; (aromatic series) C₆H₅CH₂, (C₆H₅)₂CH, (C₆H₅)₃C] in conjunction with tin tetrabromide (SnBr₄) and 1,4-dioxane (DO) in toluene at 0°C. The overall polymerization rate increased with increasing the bulkiness of the substituents R in both the series: R = CH₃ (1) ≃ CH₃CH₂ (1) < (CH₃)₂CH (1.76) < (CH₃)₃C (2.31); C₆H₅CH₂ (0.84) < (C₆H₅)₂CH (0.98) < (C₆H₅)₃C (1.74); the values in the parentheses show the relative polymerization rate. In all the polymerizations, the number-average molecular weight (M_n) of the polymers was directly proportional to monomer conversion and in good agreement with the calculated values, assuming that one RCOOH molecule forms one polymer chain. The living nature of these polymerizations was further confirmed by a linear increase in M_n of the polymers upon sequential addition of a fresh monomer feed to the almost completely polymerized reaction mixtures. In the polymerizations with sterically less hindered carboxylic acids [R = CH₃CH₂, (CH₃)₂CH, C₆H₅CH₂, (C₆H₅)₂CH], the molecular weight distribution (MWD) of the polymers was very narrow (M_w/M_n < 1.1) throughout the polymerizations. In contrast, with bulkier substituent-containing counterparts [R = (CH₃)₃C, (C₆H₅)₃C], the polymerizations led to the polymers of relatively broad MWD (M_w/M_n ≅ 1.5 at ca. 100% monomer conversion). The bulky substituents such as (CH₃)₃C and (C₆H₅)₃C may decrease the interconversion rate between a dormant and an active species and increase the time-average concentration of the active growing species. The stereoregularity of the obtained polymers was not changed much with the steric environment of the counteranion (meso: 66–69%). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2923–2932, 1999     

Living cationic polymerization of vinyl ethers with carboxylic acid/tin tetrahalide initiating systems. I. New initiating systems based on acetic acid and selection of Lewis acid and basic additive leading to living polymers with low polydispersity

Cationic polymerization of isobutyl vinyl ether (IBVE) with acetic acid (CH₃COOH)/tin tetrahalide (SnX₄: X = Cl, Br, I) initiating systems in toluene solvent at 0°C was investigated, and the reaction conditions for living polymerization of IBVE with the new initiating systems were established. Among these tin tetrahalides, SnBr₄ was found to be the most suitable Lewis acid to obtain living poly(IBVE) with a narrow molecular weight distribution (MWD). The polymerization with the CH₃COOH/SnBr₄ system, however, was accompanied with the formation of a small amount of another polymer fraction of very broad MWD, probably due to the occurrence of an uncontrolled initiation by SnBr₄ coupled with protonic impurity. Addition of 1,4-dioxane (1–1.25 vol %) or 2,6-di-tert-butylpyridine (0.1–0.6mM) to the polymerization mixture completely eliminated the uncontrolled polymer to give only the living polymer with very narrow MWD (M _w/M _n ≤ 1.1; M _w, weight-average molecular weight; M _n, number-average molecular weight). The M _n of the polymers increased in direct proportion to monomer conversion, continued to increase upon sequential addition of a fresh monomer feed, and was in good agreement with the calculated values assuming that one CH₃COOH molecule formed one polymer chain. Along with these results, kinetic study and direct ¹H-NMR observation of the living polymerization indicated that CH₃COOH and SnBr₄ act as so-called “initiator” and “activator”, respectively, and the living polymerization proceeds via an activation of the acetate dormant species. The basic additives such as 1,4-dioxane and 2,6-di-tert-butylpyridine would serve mainly as a “suppressor” of the uncontrolled initiation by SnBr₄. The polymers produced after quenching the living polymerization with methanol possessed the acetate dormant terminal and they induced living polymerization of IBVE in conjunction with SnBr₄ in the presence of 1,4-dioxane. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3173–3185, 1998