Reactivity of selected volatile organic compounds (VOCs) toward the sulfate radical (SO4−)

Rate constants for a series of alcohols, ethers, and esters toward the sulfate radical (SO₄^?) have been directly determined using a laser photolysis set‐up in which the radical was produced by the photodissociation of peroxodisulfate anions. The sulfate radical concentration was monitored by following its optical absorption by means of time resolved spectroscopy techniques. At room temperature the following rate constants were derived: methanol ((1.6 ± 0.2) × 10⁷ M^?1 s^?1); ethanol ((7.8 ± 1.2) × 10⁷ M^?1 s^?1); tert‐butanol ((8.9 ± 0.3) × 10⁵ M^?1 s^?1); diethyl ether ((1.8 ± 0.1) × 10⁸ M^?1 s^?1); MTBE ((3.13 ± 0.02) × 10⁷ M^?1 s^?1); tetrahydrofuran (THF) ((2.3 ± 0.2) × 10⁸ M^?1 s^?1); hydrated formaldehyde ((1.4 ± 0.2) × 10⁷ M^?1 s^?1); hydrated glyoxal ((2.4 ± 0.2) × 10⁷ M^?1 s^?1); dimethyl malonate (CH₃OC(O)CH₂C(O)OCH₃) ((1.28 ± 0.02) × 10⁶ M^?1 s^?1); and dimethyl succinate (CH₃OC(O)CH₂CH₂C(O)OCH₃) ((1.37 ± 0.08) × 10⁶ M^?1 s^?1) where the errors represent 2σ. For the two latter species, we also measured the temperature dependence of the corresponding rate constants. A correlation of these kinetics with the bond dissociation energy is also presented and discussed. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 539–547, 2001     

Hydroxyl radical reactions with halogenated ethanols in aqueous solution: Kinetics and thermochemistry

Laser flash photolysis combined with competition kinetics with SCN^? as the reference substance has been used to determine the rate constants of OH radicals with three fluorinated and three chlorinated ethanols in water as a function of temperature. The following Arrhenius expressions have been obtained for the reactions of OH radicals with (1) 2‐fluoroethanol, k₁(T) = (5.7 ± 0.8) × 10¹¹ exp((?2047 ± 1202)/T) M^?1 s^?1, (2) 2,2‐difluoroethanol, k₂(T) = (4.5 ± 0.5) × 10⁹ exp((?855 ± 796)/T) M^?1 s^?1, (3) 2,2,2‐trifluoroethanol, k₃(T) = (2.0 ± 0.1) × 10¹¹ exp((?2400 ± 790)/T) M^?1 s^?1, (4) 2‐chloroethanol, k₄(T) = (3.0 ± 0.2) × 10¹⁰ exp((?1067 ± 440)/T) M^?1 s^?1, (5) 2, 2‐dichloroethanol, k₅(T) = (2.1 ± 0.2) × 10¹⁰ exp((?1179 ± 517)/T) M^?1 s^?1, and (6) 2,2,2‐trichloroethanol, k₆(T) = (1.6 ± 0.1) × 10¹⁰ exp((?1237 ± 550)/T) M^?1 s^?1. All experiments were carried out at temperatures between 288 and 328 K and at pH = 5.5–6.5. This set of compounds has been chosen for a detailed study because of their possible environmental impact as alternatives to chlorofluorocarbon and hydrogen‐containing chlorofluorocarbon compounds in the case of the fluorinated alcohols and due to the demonstrated toxicity when chlorinated alcohols are considered. The observed rate constants and derived activation energies of the reactions are correlated with the corresponding bond dissociation energy (BDE) and ionization potential (IP), where the BDEs and IPs of the chlorinated ethanols have been calculated using quantum mechanical calculations. The errors stated in this study are statistical errors for a confidence interval of 95%. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 174–188, 2008     

Kinetic Studies of the Ligand Substitution Reaction of Some New Uranyl Schiff Base Complexes with Tri‐n‐butylphosphine

Kinetics of the substitution reaction of solvent molecule in uranyl(VI) Schiff base complexes by tri‐n‐butylposphine as the entering nucleophile in acetonitrile at 10–40°C was studied spectrophotometrically. The second‐order rate constants for the substitution reaction of the solvent molecule were found to be (8.8 ± 0.5) × 10^?3, (5.3 ± 0.2) × 10^?3, (7.5 ± 0.3) × 10^?3, (6.1 ± 0.3) × 10^?3, (13.5 ± 1.6) × 10^?3, (13.2 ± 0.9) × 10^?3, (52.9 ± 0.2) × 10^?3, and (88.1 ± 0.6) × 10^?3 M^?1 s^?1 at 40°C for [UO₂(Schiff base)(CH₃CN)], where Schiff base = L1–L8, respectively. In a temperature dependence study, the activation parameters ΔH^# and ΔS^# for the reaction of uranyl complexes with PBu₃ were determined. From the linear rate dependence on the concentration of PBu₃, the span of k₂ values and the large negative values of the activation entropy, an associative (A) mechanism is deduced for the solvent substitution. By comparing the second‐order rate constants k_2, it was concluded that the steric and the electronic properties of the complexes were important for the rate of the reactions.     

Kinetic study of the reaction of meso-tetrakis (p-trimethylammoniumphenyl)porphinatodiaquorhodate(II) with chloride,bromide, iodide,hexacyanocobaltate(III) and thiocyanate ions in aqueous solution

The reaction of Cl^?, Br^?, I^?, Co(CN)₆^3? and NCS^? with meso-tetrakis (p-trimethylammoniumphenyl)porphinatodiaquorhodate(III), [RhTAPP(H₂O)₂]⁵⁺, has been studied at 15, 25 and 35°C in 0.1 M [H⁺] with μ = 1.00 M (NaNO₃). The value of the acidity constant, K_al, at 25°C is 4.39 × 10^?9 M. The reactions are first order in anion concentration up to 0.9 M. The values of the stability constants, K₁, and the second order rate constants, k₁, for the reaction with Cl^?, Br^?, I^?, Co(CN)₆^3? and NCS^? are respectively 0.23 M^?1 and 2.5 × 10^?3 M^?1 s^?1, 1.1 M^?1 and 6.92 × 10^?3 M^?1 s^?1, 40.0 M^?1 and 17.0 × 10^?3 M^?1 s^?1, 550 M^?1 and 20.0 × 10^?3 M^?1 s^?1, 3400 M^?1 and 20.9 × 10^?3 M^?1 s^?1. The porphine greatly labilizes the Rh(III). There has been about a 500-fold increase in the rate constant for substitution compared to that of [Rh(NH₃)₅H₂O]³⁺. The substitution rates are however about the same as for [Rh(TPPS)(H₂O)₂]^3?, indicating that the overall charge on the complex plays only a minor role. The kinetic results indicate that dissociative activation is occurring in these reactions.     

Voltammetric and chronoamperometric investigation of germanium amalgams: Part I. Properties of the homogenous amalgam

Using cyclic voltammetry and chronoamperometry with several anodic steps the deposition and particularly the oxidation of germanium from a HMDE was investigated within pH range 4–12 at Ge (IV) concentrations ranging from 4×10^?7M to 1×10^?4M in the absence of ligands capable to form the complex compounds with Ge(IV) in a solution. It was found that the initially formed product of electrodeposition is a homogeneous, usually supersaturated amalgam. Germanium from this amalgam oxidizes at about 1 V (vs. mercury sulphate reference electrode) or after some induction period, the length of which depends on concentration of Ge(0) in mercury, it begins to crystallize forming heterogenous germanium amalgam. Germanium from this heterogenous amalgam oxidizes in a separate voltammetric peak at more positive potentials. The solubility of germanium in mercury was evaluated on the basis of the oxidation current of homogenous amalgam and the value obtained is equal to (2±0.5)×10^?7M i.e. (1.1±0.3)×10^?7 wt. %. Applying the Stevens and Shain method the diffusion coefficient of germanium in mercury was found to be (1.32±0.1)×10^?5 cm² s^?1.     

KINETICS OF FORMATION AND STABILITY CONSTANTS OF MONO AND BIS l-TYROSINE COMPLEXES OF Cu(II), Co(II), AND Ni(II)

Abstract

The kinetics and stability constants of l-tyrosine complexation with copper(II), cobalt(II) and nickel(II) have been studied in aqueous solution at 25° and ionic strength 0.1 M. The reactions are of the type M(HL)^(3-n)+ _n-1 + HL- ? M(HL)^(2-n)+_n(k_n, forward rate constant; k_-n, reverse rate constant); where M=Cu, Co or Ni, HL^? refers to the anionic form of the ligand in which the hydroxyl group is protonated, and n=1 or 2. The stability constants (K_n=k_n/k_-n) of the mono and bis complexes of Cu²⁺, Co²⁺ and Ni²⁺ with l-tyrosine, determined by potentiometric pH titration are: Cu²⁺, log K₁=7.90 ± 0.02, log K₂=7.27 ± 0.03; Co²⁺, log K₁=4.05 ± 0.02, log K₂=3.78 ± 0.04; Ni²⁺, log K₁=5.14 ± 0.02, log K₂=4.41 ± 0.01. Kinetic measurements were made using the temperature-jump relaxation technique. The rate constants are: Cu²⁺, k₁=(1.1 ± 0.1) × 10⁹ M ^?1 sec^?1, k_-1=(14 ± 3) sec^?1, k₂=(3.1 ± 0.6) × 10⁸ M ^?1 sec^?1, k^?2=(16 ± 4) sec^?1; Co²⁺, k₁=(1.3 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-1=(1.1 ± 0.2) × 10² sec^?1, k₂=(1.5 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-2=(2.5 ± 0.6) × 10² sec^?1; Ni²⁺, k₁=(1.4 ± 0.2) × 10⁴ M ^?1 sec^?1, k_-1=(0.10 ± 0.02) sec^?1, k₂=(2.4 ± 0.3) × 10⁴ M ^?1 sec^?1, k_-2=(0.94 ± 0.17) sec^?1. It is concluded that l-tyrosine substitution reactions are normal. The presence of the phenyl hydroxyl group in l-tyrosine has no primary detectable influence on the forward rate constant, while its influence on the reverse rate constant is partially attributed to substituent effects on the basicity of the amine terminus.     

Supramolecular Tetrad Featuring Covalently Linked Bis(porphyrin)–Phthalocyanine Coordinated to Fullerene: Construction and Photochemical Studies

A multimodular donor–acceptor tetrad featuring a bis(zinc porphyrin)–(zinc phthalocyanine) ((ZnP–ZnP)–ZnPc) triad and bis‐pyridine‐functionalized fullerene was assembled by a “two‐point” binding strategy, and investigated as a charge‐separating photosynthetic antenna‐reaction center mimic. The spectral and computational studies suggested that the mode of binding of the bis‐pyridine‐functionalized fullerene involves either one of the zinc porphyrin and zinc phthalocyanine (Pc) entities of the triad or both zinc porphyrin entities leaving ZnPc unbound. The binding constant evaluated by constructing a Benesi–Hildebrand plot by using the optical data was found to be 1.17×10⁵ M ^?1, whereas a plot of “mole‐ratio” method revealed a 1:1 stoichiometry for the supramolecular tetrad. The mode of binding was further supported by differential pulse voltammetry studies, in which redox modulation of both zinc porphyrin and zinc phthalocyanine entities was observed. The geometry of the tetrad was deduced by B3LYP/6‐31G* optimization, whereas the energy levels for different photochemical events was established by using data from the optical absorption and emission, and electrochemical studies. Excitation of the zinc porphyrin entity of the triad and tetrad revealed ultrafast singlet–singlet energy transfer to the appended zinc phthalocyanine. The estimated rate of energy transfer (k_ENT) in the case of the triad was found to be 7.5×10¹¹ s^?1 in toluene and 6.3×10¹¹ s^?1 in o‐dichlorobenzene, respectively. As was predicted from the energy levels, photoinduced electron transfer from the energy‐transfer product, that is, singlet‐excited zinc phthalocyanine to fullerene was verified from the femtosecond‐transient spectral studies, both in o‐dichlorobenzene and toluene. Transient bands corresponding to ZnPc ^{? +} in the 850 nm range and C₆₀ ^{? ?} in the 1020 nm range were clearly observed. The rate of charge separation, k_CS, and rate of charge recombination, k_CR, for the (ZnP–ZnP)–ZnPc ^{? +}:Py₂C₆₀ ^{? ?} radical ion pair (from the time profile of 849 nm peak) were found to be 2.20×10¹¹ and 6.10×10⁸ s^?1 in toluene, and 6.82×10¹¹ and 1.20×10⁹ s^?1 in o‐dichlorobenzene, respectively. These results revealed efficient energy transfer followed by charge separation in the newly assembled supramolecular tetrad.     

Kinetics of the photoaquation of Hexacyanoferrate(II) ion

Kinetics of the photoaquation of hexacyanoferrate(II) ion in aqueous solution were studied potentiometrically and spectrophotometrically. Supposing the simplest mechanism (see Fig. 3. in text), the photoaquation in alkaline medium can be well described. The value of the constants at pH = ll.0 are: ø = 0.8-1.0, k₆ = (3.0 ± 0.5) × 10^?8 s^?1 and k_?6 = 1.5 ± 0.2 mol^?1 dm₃ s^?1. To describe the photoaquation in neutral medium t was extended (k′ = 3.33 x 10² mol^?1 dm³s^?1). The quantum yield in acidic medium can be calculated by combination of ø values of different protonated complexes. The reversibility of photoaquation in alkaline medium is also explained by the scheme.     

Kinetic study of some reactions related to the Mn(II)-catalyzed bromate-saccharide oscillating reactions

In the stirred batch experiment, the Mn(II)-catalyzed bromate-saccharide reaction in aqueous H₂SO₄ or HClO₄ solution exhibits damped oscillations in the concentrations of bromide and Mn(II) ions. Peculiar multiple oscillations are observed in the system with arabinose or ribose. The apparent second-order rate constants of the Mn(III)-saccharide reactions at 25°C are (0.659, 1.03, 1.76, 2.32, and 6.95) M⁻¹ s⁻¹ in 1.00 M H₂SO₄ and (4.69, 7.51, 10.2, 13.5, and 36.2) M⁻¹ s⁻¹ in (2.00–4.00) M HClO₄ for (glucose, galactose, xylose, arabinose, and ribose), respectively. At 25°C, the observed pseudo-first-order rate constant of the Mn(III)-Br⁻ reaction is k_obs = (0.2 ± 0.1) [Br⁻] + (130 ± 5)[Br⁻]² + (2.6 ± 0.1) × 10³[Br⁻]³ + (1.2 ± 0.2) × 10⁴[Br⁻]⁴ s⁻¹ and the rate constant of the Br₂ Mn(II) reaction is less than 1 × 10⁻⁴ M⁻¹ s⁻¹. The second-order rate constants of the Br₂-saccharide reactions are (3.65 ± 0.15, 11.0 ± 0.5, 4.05, 12.5 ± 0.7, and 2.62) × 10⁻⁴ M⁻¹ s⁻¹ at 25°C for glucose, galactose, xylose, arabinose, and ribose, respectively.     

The kinetics of complexation of nickel(II) and cobalt(II) with cinchomeronate in aqueous solution

The pressure-jump method has been used to determine the rate constants for the formation and dissociation of nickel(II) and cobalt(II) complexes with cinchomeronate in aqueous solution at zero ionic strength. The forward and reverse rate constants obtained are k_f = 2.27 × 10⁶ M^?1 s^?1 and k_r = 3.81 × 10¹ s^?1 for the nickel(II) complex and k_f = 1.23 × 10⁷ M^?1 s^?1 and k_r = 2.66 × 10² s^?1 for the cobalt(II) complex at 25°C. The activation parameters of the reactions have also been obtained from the temperature variation study. The results indicate that the rate determining step of the reaction is a loss of a water molecule from the inner coordination sphere of the cation for the nickel(II) complex and the chelate ring closure for the cobalt(II) complex. The influence of the pyridine ring nitrogen atom of the cinchomeronate ligand on the complexation of cobalt(II) ion is also discussed.     

Oxidation of manganese(II) by ozone and reduction of manganese(III) by hydrogen peroxide in acidic solution

Manganese(II) is oxidized by ozone in acid solution, k=(1.5±0.2)×10³ M⁻¹ s⁻¹ in HClO₄ and k=(1.8±0.2)×10³M⁻¹ s⁻¹ in H₂SO₄. The plausible mechanism is an oxygen atom transfer from O₃ to Mn²⁺ producing the manganyl ion MnO²⁺, which subsequently reacts rapidly with Mn²⁺ to form Mn(III). No free OH radicals are involved in the mechanism. The spectrum of Mn(III) was obtained in the wave length range 200–310 nm. The activation energy for the initial reaction is 39.5 kJ/mol. Manganese(III) is reduced by hydrogen peroxide to Mn(II) with k(Mn(III)+H₂O₂)=2.8×10³M⁻¹ s⁻¹ at pH 0–2. The mechanism of the reaction involving formation of the manganese(II)-superoxide complex and reaction of H₂O₂ with Mn(IV) species formed due to reversible disproportionation of Mn(III), is suggested. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 207–214, 1998.     

THE INTERACTION OF 2-AMINO-2-HYDROXYMETHYL-1,3-PROPANEDIOL WITH COBALT(II) AND MANGANESE(II) IONS

Abstract

The stepwise complex formation between 2-amino-2-hydroxymethyl-1,3-propanediol (TRIS) with Co(II) and Mn(II) was studied by potentiometry at constant ionic strength 2.0 M (NaClO₄) and T = (25.0 ± 0.1)°C, from pH measurements. Data of average ligand number (Bjerrum's function) were obtained from such measurements followed by integration to obtain Leden's function, F ₀(L). Graphical treatment and matrix solution of simultaneous equations have shown two overall stability constants of mononuclear stepwise complexes for the Mn(II)/TRIS system (β₁ = (5.04 ± 0.02) M^?1 and β₂ = (5.4 ± 0.5) M^?2) and three for the Co(II)/TRIS system (β₁ = (1.67 ± 0.02) × 10² M^?1, β₂ = (7.01 ± 0.05) × 10³ M^?2 and β₃ = (2.4 ± 0.4) × 10⁴ M^?3). Slow spontaneous oxidation of Co(II) solutions by dissolved oxygen, accelerated by S(IV), occurs in a buffer solution TRIS/HTRIS⁺ 0.010/0.030 M, with a synergistic effect of Mn(II).     

Electrooxidation and Amperometric Detection of Ascorbic Acid at GC Electrode Modified by Electropolymerization of N,N‐Dimethylaniline

The polymer film of N,N‐dimethylaniline (DMA) is deposited on the electrochemically pretreated glassy carbon (GC) electrode by continuous electrooxidation of the monomer. This poly N,N‐dimethylaniline (PDMA) film‐coated electrode can be used as an amperometric sensor of ascorbic acid (AA). The polymer film (thickness (?): 0.3±0.02 μm) having positive charge in its backbone attracts the anionic species AA. Thus, the anodic peak potential (350 mV vs. Ag|AgCl|NaCl_(sat)) for the oxidation of AA at the bare electrode is largely shifted to the negative value (150 mV) at this electrode. The PDMA film‐coated electrode is stable in acidic, alkaline and neutral media and can sense AA at different pH's. The diffusion coefficients of AA in solution (D) and in film (D_s) were estimated by rotating disk electrode voltammetry: D=(5.5±0.1)×10^?6 cm² s^?1 and D_s=(6.3±0.2)×10^?8, (6.0±0.2)×10^?8 and (4.7±0.2)×10^?8 cm² s^?1 for 0.5, 1.5 and 3.0 mM AA, respectively. A permeability of AA through the PDMA film was found to decrease with increasing the concentration of AA in the solution. In the chronoamperometry, the current response for the oxidation of AA at different times elapsed after potential‐step application is linearly increased with the increase in AA concentration in a wide range of its concentration from 25 μM to 1.65 mM. In the hydrodynamic amperometry, a successive addition of 10 μM AA caused the successive increase in current response with equal amplitude and the sensitivity was calculated as 0.178 μA cm^?2 μM^?1. So, the fouling of the electrode surface caused by the oxidized product of AA is markedly eliminated at this PDMA film‐coated electrode. A flow injection analysis based on the present electrode was performed to estimate the concentration of vitamin C in fruit juice.     

Kinetic studies on the metal(II) tartarate–peroxomonosulfate reaction

The kinetics of oxidation of tartaric acid (TAR) by peroxomonosulfate (PMS) in the presence of Cu(II) and Ni(II) ions was studied in the pH range 4.05–5.20 and also in alkaline medium (pH ～12.7). The rate was calculated by measuring the [PMS] at various time intervals. The metal ions concentration range used in the kinetic studies was 2.50 × 10^?5 to 1.00 × 10^?4 M [Cu(II)], 2.50 × 10^?4 to 2.00 × 10^?3M [Ni(II)], 0.05 to 0.10 M [TAR], and µ = 0.15 M. The metal(II) tartarates, not TAR/tartarate, are oxidized by PMS. The oxidation of copper(II) tartarate at the acidic pH shows an appreciable induction period, usually 30–60 min, as in classical autocatalysis reaction. The induction period in nickel(II) tartarate is small. Analysis of the [PMS]–time profile shows that the reactions proceed through autocatalysis. In alkaline medium, the Cu(II) tartarate–PMS reaction involves autocatalysis whereas Ni(II) tartarate obeys simple first‐order kinetics with respect to [PMS]. The calculated rate constants for the initial oxidation (k₁) and catalyzed oxidation (k₂) at [TAR] = 0.05 M, pH 4.05, and 31°C are Cu(II) (1.00 × 10^?4 M): k₁ = 4.12 × 10^?6 s^?1, k₂ = 7.76 × 10^?1 M^?1s^?1 and Ni(II) (1.00 × 10^?3 M): k₁ = 5.80 × 10^?5 s^?1, k₂ = 8.11 × 10^?2 M^?1 s^?1. The results suggest that the initial reaction is the oxidative decarboxylation of the tartarate to an aldehyde. The aldehyde intermediate may react with the alpha hydroxyl group of the tartarate to give a hemi acetal, which may be responsible for the autocatalysis. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 620–630, 2011     

Direct Voltammetry of Copper,Zinc‐Superoxide Dismutase Immobilized onto Electrodeposited Nickel Oxide Nanoparticles: Fabrication of Amperometric Superoxide Biosensor

Direct electron transfer of immobilized copper, zinc‐superoxide dismutase (SOD) onto electrodeposited nickel‐oxide (NiOx) nanoparticle modified glassy carbon (GC) electrode displays a well defined redox process with formal potential of ?0.03 V in pH 7.4. Cyclic voltammetry was used for deposition of (NiOx) nanoparticles and immobilization of SOD onto GC electrode. The surface coverage (Γ) and heterogeneous electron transfer rate constant (k_s) of immobilized SOD are 1.75×10^?11 mol cm^?2 and 7.5±0.5 s^?1, respectively. The biosensor shows a fast amperometric response (3 s) toward superoxide at a wide concentration range from 10 µM to 0.25 mM with sensitivity of 13.40 nA µM^?1 cm^?2 and 12.40 nA µM^?1 cm^?2, detection limit of 2.66 and 3.1 µM based on anodically and cathodically detection. This biosensor exhibits excellent stability, reproducibility and long life time.     

Synthesis and characterization of biocompatible poly (L-lactide) using zinc (II) salen complex

Abstract

A biocompatible zinc (II) complex based on a tetradentate N,N,O,O-type salen ligand was synthesized, characterized and used for the solvent-free ring-opening polymerization (ROP) of L-lactide in bulk at 180?°C to prepare high molecular weight poly(L-lactide) (M_n : 82,600?Da; M_w : 140,000?Da; PDI: 1.70). Poly(L-lactide) (PLLA) was characterized using FTIR, ¹H NMR, ¹³C NMR, GPC, TGA, DSC, WAXD, and MALDI-ToF. Kinetic measurement was carried out and first-order behavior to monomer was observed. The k _app was found as 6?±?0.001?×?10^?4?s^?1. The biocompatibility of the PLLA was confirmed by in vitro cytotoxicity against NIH/3T3 fibroblast cell line and can be used in biomedical applications.     

Decomposition of meta- and para-phenylphenol during ozonation process

The decomposition of meta-phenylphenol (m-PP) and para-phenylphenol (p-PP) in a heterogeneous gas-liquid system using ozone was investigated. The influence of different reaction parameters such as ozone and PP isomers concentration as well as pH and temperature of the reaction mixture on the PP decay rate was determined. The second-order rate constants for the direct reaction of molecular ozone, determined in a homogeneous system, were (5.85 ± 0.35) × 10² M^?1 s^?1 and (8.90 ± 0.33) × 10² M^?1 s^?1 for m-PP and p-PP, respectively. The rate constants for the reaction of m-PP and p-PP with ozone increased with increasing pH. The reaction rate constants with ozone were found to be (1.75 ± 0.02) × 10⁹ M^?1 s^?1 and (1.86 ± 0.02) × 10⁹ M^?1 s^?1 for m-PP and p-PP anions, respectively.     

Rate coefficients for CS reactions with O2, O3 and NO2 AT 298 K

CS radicals have been produced by photodissociation of CS₂ at 193 nm and their disappearance monitored by LIF. The vibrationally excited CS radicals rapidly relax to CS(ν = 0). At 298 K, the rate coefficients for CS(ν = 0) reactions with O₂, O₃ and NO₂ are (2.9 ± 0.4) × 10_?19, (3.0 ± 0.4) × 10^?16 and (7.6 ± 1.1) × 10^?17 cm³ molecule^?1 s^?1 respectively. The quenching of CS(A ¹II)_ν=0 by He has a rate coefficient of (1.3 ± 0.2) × 10^?12 cm³ molecule^?1 s^?1.     

Gas‐phase ozonolysis: Rate coefficients for a series of terpenes and rate coefficients and OH yields for 2‐methyl‐2‐butene and 2,3‐dimethyl‐2‐butene

The kinetics of the gas‐phase reactions of O₃ with a series of selected terpenes has been investigated under flow‐tube conditions at a pressure of 100 mbar synthetic air at 295 ± 0.5 K. In the presence of a large excess of m‐xylene as an OH radical scavenger, rate coefficients k(O₃+terpene) were obtained with a relative rate technique, (unit: cm³ molecule^?1 s^?1, errors represent 2σ): α‐pinene: (1.1 ± 0.2) × 10^?16, ³Δ‐carene: (5.9 ± 1.0) × 10^?17, limonene: (2.5 ± 0.3) × 10^?16, myrcene: (4.8 ± 0.6) × 10^?16, trans‐ocimene: (5.5 ± 0.8) × 10^?16, terpinolene: (1.6 ± 0.4) × 10^?15 and α‐terpinene: (1.5 ± 0.4) × 10^?14. Absolute rate coefficients for the reaction of O₃ with the used reference substances (2‐methyl‐2‐butene and 2,3‐dimethyl‐2‐butene) were measured in a stopped‐flow system at a pressure of 500 mbar synthetic air at 295 ± 2 K using FT‐IR spectroscopy, (unit: cm³ molecule^?1 s^?1, errors represent 2σ ): 2‐methyl‐2‐butene: (4.1 ± 0.5) × 10^?16 and 2,3‐dimethyl‐2‐butene: (1.0 ± 0.2) × 10^?15. In addition, OH radical yields were found to be 0.47 ± 0.04 for 2‐methyl‐2‐butene and 0.77 ± 0.04 for 2,3‐dimethyl‐2‐butene. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 394–403, 2002     

THE PHOTOEXCITED TRIPLET STATE OF TETRAPHENYL CHLORIN, MAGNESIUM TETRAPHENYL PORPHYRIN AND WHOLE CELLS OF CHLAMYDOMONAS REINHARDI. A LIGHT MODULATION-EPR STUDY

Abstract— The photoexcited triplet states of frozen solutions of tetraphenyl chlorin (TPC), magnesium tetraphenyl porphyrin (MgTPP) and whole cells of Chlamydomonas reinhardi have been studied by light modulation-EPR spectroscopy. The porphyrins were chosen to be studied as model compounds for chlorophyll molecules, From EPR spectra the zero field splitting parameters (ZFS) were calculated. For TPC, |D| = 0.0364 ± 0.0002 cm^-1, |E| = 0.0063 ± 0.0002 cm^-1. For MgTPP, |D| = 0.0310 ± 0.0002 cm^-1. For chloroplasts, |D| = 0.0280 ± 0.0004 cm^-1, |E| = 0.0032 ± 0.0004 cm^-1. In all compounds studied, except MgTPP, electron spin polarization (ESP) was observed. From the analysis of the kinetic curves at each canonical orientation we evaluated the spin lattice relaxation rate W, the depopulation rate constants k_p, and the ratio between the population rate constants, A_p, at zero magnetic field. For TPC in ethanol-toluene (5:1) k_x= (0.70 ± 0.10) × 10³ s^-1, k_y= (0.40 ± 0.07) × 10³ s^-1, k_x= (0.24 ± 0.05) × 10³ s^-1; A_x:A_y:A_z? 1.0:0.6:0.4; W= (2.60 ± 0.40) × 10³ s^-1. For MgTPP, only the total decay rate constant, k_T, was calculated: (1.5 ± 0.2) × 10 s^-1 in n-octane and (4.8 ± 0.8) × 10 s^-1 in ethanol. The results for TPC and MgTPP are compared to those reported previously for chlorophyll. It is concluded that the dynamics of the photoexcited triplet state in chlorophylls are mainly governed by the chlorin macrocycle. From the EPR spectrum and ZFS parameters of chloroplasts, we propose that both chlorophyll a and chlorophyll b are the main constituents of the EPR spectrum. From the analysis of the kinetic curves we obtain separately the kinetic parameters for chlorophylls a and b, k^a_x= (1.30 ± 0.20) × 10³ s^-1, k^a_y;= (0.85 ± 0.15) × 10³ s^-1k^a_x= (0.32 ± 0.05) × 10³ s^-1; A^a_x:A^a_y:A^a_z? 1.0:0.7:0.2; W^a= (1.20 ± 0.20) × 10³ s^-1; k^b_x= (0.56 ± 0.09) × 10³ s^-1, k^b_y= (0.30 ± 0.04) × 10³ s^-1, k^b_z= (0.06 ± 0.01) × 10³ s^-1; A^b_x:A^b_y:A^b_x? 1.0:0.6:0.1; W^b= (5.00 ± 0.80) × 10³ s^-1. These results are very close to those found separately for chlorophyll a and chlorophyll b oligomers in vitro.