Mechanisms of antioxidant action. The role of nitroxyl radicals as chain-breaking acceptor antioxidants in the mechanodegradation of rubber

It is shown that 4-hydroxy-2,2,6,6-tetramethylpiperidinoxyl (HTMPO) becomes partially attached to natural rubber during mechano-oxidation in a shearing mixer at ambient temperatures. It is concluded that the main mechanism responsible for the antidegradant activity of HTMPO under shearing conditions is direct oxidation of mechanochemically produced macroalkyl radicals to species containing conjugated unsaturation.     

Mechanisms of antioxidant action: The catalytic rôle of iodine in the stabilisation of polypropylene

It is shown that I₂ is an effective melt stabiliser for polypropylene at 190°C in a closed mixer but that it is much less effective in an open mixer. The formation of HI and unsaturation in the polymer show that a catalytic antioxidant mechanism (CB-A/CB-D) is involved in the antioxidant activity of I₂ in a closed mixer similar to that occurring in the stabilisation of polyolefins with galvinoxyl and nitroxyl radicals.The processed polymer shows slightly greater uv stability than the control with no additive but is essentially similar to the control in thermal oxidative stability. The volatility of HI in an air oven probably accounts for the fact that it has no CB-D activity under these conditions.     

Mechanisms of antioxidant action: The effectiveness of a polymer-bound UV stabiliser for ABS in relation to its method of preparation

It is shown that a polymer reactive UV absorber (I) (EBHPT) can be chemically combined with ABS in a redox reaction to give modified polymers containing up to 25g of bound UV stabiliser per 100 g of polymer. The adduct concentration so formed can be used as masterbatches to modify normal unstabilised ABS to give products which are substantially more UV stable than can be obtained with commercially available UV stabilisers at the same molar concentration. The evidence suggests that the non-uniform distribution of the molecularly dispersed UV stabiliser among the polymer chains resulting from the masterbatch procedure does not lead to inferior mechanical properties (impact resistance, etc.) compared with the unmodified polymer, nor to inferior antioxidant performance.     

Spectroelectrochemical characterisation of poly[Ni(saltMe)]-modified electrodes

Electrogenerated polymers based on the nickel(II) complex 2,3-dimethyl-N,N'-bis(salicylidene)butane-2,3-diaminatonickel(II), poly[Ni(saltMe)], were characterised by in situ FTIR and UV/Vis spectroscopy and ex-situ EPR spectroscopy in order to gain insights into film structure, electronic states and charge conduction. The role of the nickel ions during film oxidation was probed by using EPR to study naturally abundant Ni and 61Ni-enriched polymers. The data from all the spectroscopic techniques are consistent, and clearly indicate that polymerisation and redox switching are associated with oxidative ligand based processes; coulometry suggests that one positive charge was delocalised through each monomer unit. EPR provided evidence for the non-direct involvement of the metal in polymer oxidation: the polymer is best described as a polyphenylene-type compound (conducting polymer), rather than an aggregation of nickel complexes (redox polymer), and the main charge carriers are identified as polarons. An explanation for the high electrochemical stability and conductivity of poly[Ni(saltMe)] with respect to that of poly[Ni(salen)] is proposed. based on stereochemical repulsion between monomeric units; this can impose a less compact supramolecular structure on polymers with bulkier substituents.     

Low-potential facile electrosyntheses of high-quality free-standing poly(fluorene-9-carboxylic acid) films

A novel conducting polymer, high-quality poly(fluorene-9-carboxylic acid) (PFCA) film, was synthesized electrochemically by direct anodic oxidation of fluorene-9-carboxylic acid (FCA) in boron trifluoride diethyl etherate (BFEE) containing a certain amount of trifluoroacetic acid (TFA). PFCA films obtained from this media showed good redox activity and stability. Optical properties were studied by UV–vis and fluorescent spectroscopy. Fluorescent spectral studies indicate that solid PFCA film is a good blue-light emitter. To the best of knowledge, this is the first report on direct anodic oxidation of FCA.     

Effect of solvent and supporting electrolyte on redox conversions of electropolymerized copper tetraaminophthalocyanine

Electropolymerization of copper tetraaminophthalocyanine in dimethyl sulfoxide (DMSO) is studied, along with redox conversions of this polymer inDMSO and propylene carbonate (PC). At cathodic potentials, redox conversions of the polymer are similar to those of the monomer. At anodic potentials, the polymer exhibits some redox activity in PC and almost none, inDMSO. The redox conversions are attributed to the formation of a common system of conjugated bonds. Deceased.     

Synthesis of 3,6-dioxa-Δ-4-trifluoromethyl perfluorooctyl trifluoromethyl sulfonimide: bis[(perfluoroalkyl)sulfonyl] superacid monomer and polymer

A new type of ion exchange polymer, bis[(perfluoroalkyl)sulfonyl]imide ionomers (PFSI), were developed by the copolymerization of sodium 3,6-dioxa-Δ⁷-4-trifluoromethyl perfluorooctyl trifluoromethyl sulfonimide with tetrafluoroethylene (TFE) using an aqueous redox initiation system in an emulsion type polymerization. These polymers have been prepared in various equivalent weights and processed into functional membranes. The new ionomers exhibit excellent chemical and thermal stability. The materials have high potential for electrochemical applications especially as solid polymer electrolytes (SPE) in proton exchange membrane (PEM) fuel cells.     

Photo-stabilising action of metal chelate stabilisers in polypropylene: Part VII—Additive interactions

The interactions of three metal chelates (nickel (II) 2,2′-thiobis (4-tertoctyl-phenolato), n-butylamine (Cyasorb UV 1084) and the nickel and calcium derivatives of bis(ethyl-3,5-di-tert-butyl-4-hydroxybenzyl) phosphonate (Irgastab 2002 and Irganox 1425)) with other commercial additives, in the stabilisation of polypropylene film, are examined using normal and second-order derivative ultraviolet and infra-red spectroscopic techniques. It is shown that the observed behaviour is dependent on the particular additive, the processing history of the polymer and the metal chelate concerned, and is therefore highly complex. All three chelates show antagonism with a hindered piperidine, bis(2,2,6,6-tetramethyl-4-piperidinyl) sebacate (Tinuvin 770), in unprocessed polymer, whereas one of the chelates behaves synergistically with this additive in processed samples. The chelates also show antagonism with a primary antioxidant, tris((3-(3′,5′-di-tert-butyl-4-hydroxybenzyl)-2′'-aceto-ethyl)) isocyanurate (Goodrite 3125), whereas, with a secondary antioxidant, distearyl pent-aerithrityl diphosphite (Weston 618), their behaviour is synergistic in both unprocessed and processed polymer. Two of the chelates show synergism with 2-hydroxy-4-n-octoxybenzophenone (Cyasorb UV 531), the remaining chelate showing antagonism. Mixtures containing a three-additive system show a more complex behaviour. The results are explained in terms of hydroperoxide decomposition, inhibition, stabiliser dispersion, ultraviolet stability and additive compatibility.     

Novel Nickel Redox Polymer as an Efficient Electrode Material for Electrochemical Sensing

A novel redox polymer comprised of poly(3,4‐ethylenedioxythiophene) (PEDOT) and ethylenediamine tetraacetic acid‐Ni²⁺ (EDTA‐Ni) complex serving as doping anions has been synthesised by a facile one‐step electrochemical approach and utilized as an efficient electrode material for sensitive luteolin detection. The morphology, chemical structure and composition of the redox polymer were analyzed by SEM, UV‐vis and FT‐IR spectrum. Electrochemical tests revealed that the redox polymer was highly electrochemically reversible and exhibited good electrocatalytic activity to the redox reactions of luteolin with a linear range covering from 1 nM to 10 µM with a low detection limit of 0.3 nM of luteolin.     

A novel ferroceneylazobenzene self-assembled monolayer on an ITO electrode: photochemical and electrochemical behaviors

A novel ferroceneylazobenzene self-assembled monolayer (SAM) has been constructed on an indium-tin oxide (ITO) electrode via the covalent attachment of 4-(4'-11-ferrocenyl-undecanoxyphenylazo)benzoic acid ( FcAzCOOH) onto a silanized ITO substrate surface and verified by reflectance infrared spectroscopy and water contact angle. Atomic force microscopy (AFM) and cyclic voltammogram (CV) indicated that the FcAzCOOH formed a uniform and reproducible SAM on the ITO electrode with a surface coverage of ca. 1.9 x 10 (-10) mol/cm (2) (87 A (2)/molecule). The reversible photoisomerization behavior of the SAM was characterized by UV-vis spectra. The azo pi-pi* transition band intensity of the SAM gradually decreased with UV (365 nm) irradiation and was almost recovered again when subsequent exposure to ambient room light (400-800 nm). The increased tilt angle of the molecules on the ITO substrate after UV irradiation further confirmed the trans-to- cis isomerization of azobenzene moieties. The CV of the trans- FcAzCOOH modified ITO electrode showed a pair of waves due to redox of the ferrocene groups in the potential range of 0 to +800 mV (vs SCE), and the peak separation of the redox wave became larger after UV irradiation and almost returned to its original value after subsequent exposure to the visible light. Rate-dependent CV curves indicated that the charge transfer rate between the ferrocene species in the SAM and the ITO electrode was slowed down after UV irradiation due to the smaller porosity of the monolayer film and the more compact barrier layer between the redox species and the ITO electrode. It is the first time to directly observe the influence of photoisomerization of the azobenzene moiety on the redox behavior of redox species in the ferroceneylazobenzene-functionalized SAM. The present results provide profound insight into the role of redox microenvironment on electron transfer kinetics and also provide a simple and facile approach to the preparation of photocontrollable electrodes.     

Nafion基氧化还原聚合物在空气中的电荷传输性能

利用三明治电池和伏安法测试了不同制备条件的Nafion基氧化还原聚合物膜在空气中的电荷传输性能. 研究结果表明, 混合适量聚乙二醇(PEG)的Nafion基金属联吡啶配合物{Nafion[M(bpy)2+3, PEG](M=Ru, Fe)}膜的表观电荷传递扩散系数(Dct)达到10-6-10-7 cm2·s-1 , 电子或空穴迁移率(μ)达到10-4-10-5 cm2·V-1·s-1. 在导电玻璃(ITO)电极与Nafion基氧化还原聚合物膜界面引入一层导电聚苯胺(PANI)后, 降低了其接触电阻, 使氧化还原聚合物膜的Dct提高至10-5-10-6 cm2·s-1, μ提高至10-3-10-4 cm2·V-1·s-1, 且工作电流提高了近两个数量级. 该固态氧化还原聚合物膜的性能比较稳定, 在空气中放置30天后其Dct和μ降低得很少.     

An Aqueous Conducting Redox‐Polymer‐Based Proton Battery that Can Withstand Rapid Constant‐Voltage Charging and Sub‐Zero Temperatures

Electrodes based on organic matter operating in aqueous electrolytes enable new approaches and technologies for assembling and utilizing batteries that are difficult to achieve with traditional electrode materials. Here, we report how thiophene‐based trimeric structures with naphthoquinone or hydroquinone redox‐active pendent groups can be processed in solution, deposited, dried and subsequently polymerized in solid state to form conductive (redox) polymer layers without any additives. Such post‐deposition polymerization offers efficient use of material, high mass loading (up to 10 mg cm^?2) and good flexibility in the choice of substrate and coating method. By employing these materials as anode and cathode in an acidic aqueous electrolyte a rocking‐chair proton battery is built. The battery shows good cycling stability (85 % after 500 cycles), withstands rapid charging, with full capacity (60 mAh g^?1) reached within 100 seconds, allows for direct integration with photovoltaics, and retains its favorable characteristics even at ?24 °C.     

Exploring Redox Behavior of Neutral pH Active Poly(melamine) and its Electrocatalytic Origination towards NADH Detection

We report here in detail the redox properties and catalytic origination of poly(melamine). Gradual change in redox behavior of the monomer from polymer is explained by grafting monomer and different amounts of polymer on screen printed carbon electrode. The redox peak of the poly(melamine) is pH‐dependent with a slope of ?60 mV/pH, representing a Nernstian type proton‐coupled electron‐transfer process. Catalytic origination from the ? NH‐NH? bond formed in polymer is proved using NADH as a probe. This polymer is effective to catalyze NADH oxidation with a wide linear range of 1 μM–10 mM and a detection limit (S/N=3) of 0.67 μM. Most importantly, unlike most neutral pH active polymer dyes, it shows high stability even after 15 days.     

Development of a novel UV indicator and dosimeter film

A novel UV indicator is described, comprising nanocrystalline particles of titania dispersed in a film of a polymer, hydroxyl ethyl cellulose (HEC), containing: a mild reducing agent, triethanolamine (TEOA) and a redox indicator, methylene blue (MB). The UV indicator film is blue-coloured in the absence of UV light and loses colour upon exposure to UV light, attaining within a few min a steady-state degree of bleaching that can provide a measure of the irradiance of the incident light. The original blue colour of the film returns once the source of UV light is removed. The spectral characteristics of a typical UV indicator film, and its components, are discussed and the UV-absorbing action of the titania particles highlighted. From the measured %bleaching undergone by a typical UV indicator as a function of light irradiance the indicator appears fully bleached, within 7 min, by a UV irradiance of 3 mW cm(-2) or greater. The mechanism by which the UV indicator works is described. The reversible nature of the UV indicator is removed by covering a typical UV indicator with a thin, largely oxygen impermeable, polymer film, such as the regenerated cellulose found in Sellotape. The product is a UV dosimeter, the response of which is related to the intensity and duration of the incident UV light, as well as the amount of titania in the film. A typical UV dosimeter film is fully bleached by 250 mJ cm(-2) of UV light. The possible use of these novel indicators to measure UV exposure levels, irradiance and dose, is discussed.     

Organic acid doped polythiophene nanoparticles as electrode material for redox supercapacitors

An organic acid doped electronically conducting polymer nanomaterial, polythiophene‐tartaric acid (PTh‐TA) nanoparticles, was prepared by cationic surfactant‐assisted dilute polymerization method. The physical properties of the synthesized polymer were characterized by FT‐IR, UV‐visible spectroscopy, X‐ray diffraction, SEM, and electrical conductivity studies. The symmetric type redox supercapacitor performances were studied in PVdF‐HFP in 1 M LiPF₆ containing EC&PC (1:1 v/v) based microporous polymer electrolyte. The specific capacitance of the capacitor was found to be 156 F g^?1. The energy and power densities were calculated as 14 Wh kg^?1 and 522 W kg^?1, respectively. The value of capacitance was found to be almost stable up to 1000 cycles and even more. Copyright © 2009 John Wiley & Sons, Ltd.     

Conjugated and Non-conjugated Polymers Containing Two-Electron Redox Dihydrophenazines for Lithium-Organic Batteries

Organic p-type cathode materials have recently attracted increasing attention due to their higher redox potentials and rate capabilities in comparison to n-type cathodes. However, most of the p-type cathodes based on one-electron redox still suffer from limited stability and low specific capacity (<150 mAh g⁻¹). Herein, two polymers, conjugated poly(diethyldihydrophenazine vinylene) ( CPP ) and non-conjugated poly(diethyldihydrophenazine ethylidene) ( NCPP ) containing two-electron redox dihydrophenazine, have been developed as p-type cathode materials. It is experimentally and theoretically found that the conjugated linkage among the redox centers in polymer CPP is more favorable for the effective charge delocalization on the conjugated polymer backbone and the sufficient oxidation in the higher potential region (3.3–4.2 V vs. Li/Li⁺). Consequently, the CPP cathode displays a higher reversible specific capacity of 184 mAh g⁻¹ with excellent cycling stability.     

A new oxidation state of aniline pentamer observed in water‐soluble electroactive oligoaniline‐chitosan polymer

A novel water‐soluble electroactive polymer, aniline pentamer crosslinked chitosan (Pentamer‐c‐Chi), was prepared by condensation polymerization of the terminal carboxyl groups in aniline pentamer with the amino side groups in chitosan in aqueous solution. The carboxyl groups were activated by N‐hydroxysuccinimide (NHS) and N,N′‐dicyclohexylcarbodiimide (DCC). The electrochemical behavior of anilinepentamer in this kind of crosslinked polymer was studied in acidic aqueous solution by means of cyclic voltammetry (CV), UV–vis, and electron spin resonance (ESR) spectroscopy. There were three reversible redox peaks in the CV of Pentamer‐c‐Chi. A new emeraldine oxidization state in the form of radical cations was proposed, which was associated with the new absorption band at 370 nm in the UV–vis spectra. The ESR of the aqueous solution of Pentamer‐c‐Chi showed a single Lorentzian shaped signal, which suggested the existence of radical cations. The new redox state was pH dependent and appeared only at pH < 3. The stability of radical cations could be attributed to the hydrogen bonds between radical cations, water, and chitosan. Morphological structure of the Pentamer‐c‐Chi can be adjusted by varying the content of aniline pentamer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1124–1135, 2008     

Designing Cyclometalated Ruthenium(II) Complexes for Anodic Electropolymerization

The anodic electropolymerization of thiophene‐functionalized cyclometalated ruthenium(II) complexes is shown for the first time. Oxidative decomposition reactions can be overcome by modification of the involved redox potentials through the introduction of electron‐withdrawing substituents, namely nitro groups, at the cyclometalating phenyl ring. The generated functionalized ruthenium(II) complexes allow the electrochemical preparation of thin polymer films, which show a broad UV/Vis absorption as well as reversible redox switchability. The presented complexes are promising candidates for future photovoltaic applications based on photo‐redox‐active films.     

Synthesis and characterization of azo–bisbenzylidene‐based polymers for second order nonlinear optics

Main chain polymers containing azo and bisbenzylidene moiety were synthesized by polycondensation method. The successful polymerization reaction was characterized by UV–vis absorption, FT‐IR and NMR spectroscopy. The resulting polymers were soluble in polar solvents like dimethyl formamide (DMF) and showed good thermal stability up to 250 °C. These polymers were blended with poly methyl methacrylate (PMMA) and corona poled for characterizing second harmonic generation (SHG) property. Temperature stability study of SHG intensity of poled polymer showed that it is stable up to 80 °C. To improve temperature stability further the crosslinking of polymer under UV light is proposed. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4317–4324     

Nanocomposite of montmorillonite with telechelic sulfonated poly(butylene terephthalate): Effect of ionic groups on clay dispersion, mechanical and thermal properties

Telechelic ionomeric poly(butylene terephthalate) nanocomposites with organically modified clays have been prepared by the melt intercalation technique both in Brabender mixer and in twin screw-extruder. The presence of ionic groups tethered at the end of the polymer chains permits electrostatic interaction between the polymer and the surface of an organically modified clays providing a thermodynamic driving force for the dispersion of the clay platelets in the polymer matrix. The improved dispersion has been verified by TEM and XRD analyses. Nanocomposites with telechelic polymers present therefore consistently higher thermo-mechanical properties and improved thermal and hydrolytic stability respect to nanocomposites with standard PBT. Nanocomposite obtained using PBT with 3% telechelic ionic groups and with 5% of clay present a heat deflection temperature that is 48 °C higher compared to that of the commercial material. The presence of the clay also slightly increases the thermal and hydrolytic stability respect to standard PBT.