Assignments of dissociation constants of primaquine by 13C-NMR spectroscopy

The first and second dissociation constants of primaquine have been determined by titration in acetonitrile-water mixtures and estimated in pure water by using linear regression analysis. The assignments of dissociation constants were unambiguously achieved by studying the ¹³C nmr spectral data obtained on the mono-, di-, and trihydrochloride salts.     

Characterization of phenol-terminated polystyrenes by means of 13C-NMR spectroscopy

In the presence of many alkylphenols, cationic polymerization of styrene by aluminium chloride leads to low-molecular-weight polystyrenes that contain end groups derived from the phenols. The fraction of phenolic end groups in the polymer is estimated by ultraviolet (UV) measurements to be 40–70% dependent on phenol and the reaction conditions. Phenol is incorporated into the polymer over the whole range of molecular weights (up to 7000). At high phenol concentrations, a significant proportion of the product consists of 1:1 and 1:2 phenol-styrene adducts. The position of attack of the growing carbenium ion on the phenol can be determined by ¹³C-NMR spectroscopy. With 2,6-dialkylphenols, such as 2,6-di-tert-butylphenol, the high field aromatic resonance near 119.7 ppm is shifted downfield by about 16 ppm when the phenol is incorporated into the polystyrene as an end group. This is interpreted as an exclusive attack of the growing carbenium ion on the 4-position of the phenol. With 2,4-dialkylphenols, such as 2-tert-butyl-4-methylphenol, a corresponding downfield shift shows that reaction occurs only at the 6-position. The preferred site of attack for phenols such as 2-alkylphenols which lack both ortho- and parasubstituents, is the 4-position. With such phenols attack at the 6-position is not excluded. Low-molecular-weight adducts contain 1-methylbenzyl end groups and ¹³C-spectra are consistent with their presence in the higher-molecular-weight polystyrenes.     

Structural characterization of polybenzyls by high field 13C-NMR spectroscopy

¹³C-NMR Spectroscopy has been used for the structural characterization of polybenzyls synthesized from the polymerization of benzyl chloride catalyzed by arene chromium tricarbonyls. The ¹³C-chemical shifts for various mono-, di-, tri-, and tetrasubstituted phenyl groups in a polybenzyl have been calculated by the use of additivity parameters and compared with their observed shifts. Although from a theroetical point of view, polysubstitution on a phenyl ring gives rise to a number of isomers, the results indicate the preferential formation of only a few of them due to steric and electronic considerations. Based on quantitative ¹³C-NMR data, several important structural parameters including the percentage of mono-, di-, tri-, and tetrasubstituted phenyl rings in the polybenzyl can be calculated. The extent of branching in a number of polybenzyls prepared under different experimental conditions was determined. The results indicate an increase in branching with the increase in reaction temperature.     

Study of the microstructure of tetrahydrofuran-3,3 dimethyloxetane copolymers by 13C-NMR spectroscopy.

The microstructure of tetrahydrofuran (A)-3,3 dimethyloxetane (B) copolymers was studied by ¹³C-{¹H}-NMR spectroscopy. Only the methyl carbons corresponding to the 3,3 dimethyloxetane unit appear as a singlet, whereas the other carbons present a more complicated spectral pattern than it would be expected if ? effects were negligible. The assignment of the resonance signals allowed the determination of the values of the probabilities of the different triads, which were in good agreement with those obtained from the reactivity ratios.     

Stereoregularity and polymerization mechanism of polymethacrylonitriles determined by 13C-NMR spectroscopy

Carbon-13 nuclear magnetic resonance (¹³C-NMR) spectra of polymethacrylonitriles prepared under various conditions were measured. In acetone solution, the α-methyl carbon absorptions were split into triads and partially into pentads, and the methylene carbon absorptions into tetrads. In trifluoroacetic acid solution, the α-methyl carbon absorptions were split into pentads and the cyano carbon absorptions into triads. The triad, tetrad, and pentad tacticities determined from ¹³C-NMR spectra were compared with dyad tacticities determined from proton NMR spectra. The stereoregularity of the polymers which are γ-ray-initiated in liquid phase at temperatures near melting point (?35.8°C) and in the solid state differs from that of the polymers radically initiated at ?20 to 80°C. The stereoregularity and the conversion suggest the existence of an ionic mechanism in the polymerization at low temperatures.     

The analysis of cured drying oils by swollen state 13C-NMR spectroscopy

Swollen state ¹¹C-NMR spectroscopy is used to obtain information on the structures of cured drying oils used in alkyd paint manufacture. Examination of the individual drying components within these oils suggests that the behaviours of linolenate and linoleate groups are quite different. Low molecular weight materials produced during curing can be examined and their structures compared with those of the bulk insoluble product. The effects of catalyst upon the drying process can also be studied for the more reactive drying oils. Cured oils can be identified but the characteristic features are often reduced to low level components.     

Nylon 6 structure in solid state as studied by high-resolution 13C-NMR spectroscopy

High resolution ¹³C-NMR spectra of nylon 6 samples crystallized under various conditions and of a drawn sample were measured at room temperature by the cross polarization/magic angle spinning (CP/MAS) and pulse saturation transfer/magic angle spinning techniques. Additionally, ¹³C-NMR spectra of the drawn sample were measured at temperatures from 20 to 100°C by the CP/MAS technique and at 20 and 100°C by the low-power decoupling/magic angle spinning technique. The nylon 6 structure in the solid-state is discussed on the basis of these results. The solid-state ¹³C chemical shift data are used for reference in a study of conformation in solution.     

In vivo Investigation of Plant-Cell Metabolism by means of natural-abundance 13C-NMR spectroscopy

Based on the natural abundance of ¹³C, in vivo ¹³C-NMR was used for the first time to monitor the metabolism of sucrose and hydroquinone ( 1 ) in cell suspensions of the plant Rauwolfia serpentina (L.) BENTH . ex KURZ . Cells converted sucrose extracellularly into α-D - and β -D -glucose as well as into β -D -fructofuranose and β -D -fructopyranose, respectively. The sugar mixture was completely taken up by the cells after 4 days. Hydroquinone fed at that time resulted in optimum conversion into its β -D -glucoside arbutin ( 2 ) within 10 h. A further metabolite, the primeveroside ( 3 ) of hydroquinone, appeared as a trace compound after 10 h. The formation of this diglycoside can be increased by further addition of sucrose.     

Facile characterization of polymer-supported reagents using cross polarization magic angle spinning method in solid state 13C-NMR

Polymer-supported (PS) reagents can be easily characterized using a cross polarization magic angle spinning method in solid state (13)C-NMR. The technique was applied to the characterization of PS-dimethylimidazolidinone, analogue to potential heterogeneous dehydrating agent.     

Determination of microstructure and glass-transition temperature of acrylonitrile-methyl acrylate copolymers by 13C-NMR spectroscopy

Acrylonitrile-methyl acrylate (A/M) copolymers of different monomer compositions were prepared by bulk polymerization using free radical initiator (benzoyl peroxide). Copolymer compositions were determined by elemental analyses and comonomer reactivity ratios were determined by the nonlinear least squares errors-in-variables methods (EVM). Terminal and penultimate reactivity ratios have been calculated using the observed monomer triad sequence distribution determined from ¹³C{¹H}-NMR spectra. The triad sequence distribution was used to calculate diad concentrations, conditional probability parameters, number-average sequence lengths, and run number in the copolymers. The observed triad sequence concentrations determined from ¹³C{¹H}-NMR spectrum agreed well with those calculated from reactivity ratios. Glass transition temperatures (T_g) of various copolymers determined from DSC gave good agreement with those obtained from NMR. © 1992 John Wiley & Sons, Inc.     

Stereoregularity of fractionally crystallized poly(propylene oxide) samples by 13C-NMR spectroscopy

Several stereoregular poly(propylene oxide) (PPO) samples were synthesized employing either trimethyl aluminum hydrolyzates or Pruitt–Baggett type catalysts. Dilute isooctane solutions of these samples were fractionally crystallized by stepwise cooling from 333 K down to 273 K. The fractions which dissolve at 273 K were noncrystallizable and were further fractionated by GFC. The isolated fractions were characterized by ¹³C-NMR, DSC, and viscometry techniques. Both structural (head-to-head and tail-to-tail linkages) and steric (syndiotactic dyads) irregularities were found in otherwise isotactic chains and their abundance apparently increased as the melting point and the chain length of the fractions decreased.     

Stereoregularity of poly(2-vinylpyridine) determined by 1H-NMR and 13C-NMR spectroscopy

In order to determine the stereoregularity of poly(2-vinylpyridine), 2-vinylpyridine-β,β-d₂ was synthesized. The ¹H-NMR spectra of the deuterated polymer in D₂SO₄ and o-dichlorobenzene solutions showed three peaks, which were assigned to triad tacticities. Since the absorptions of heterotactic and syndiotactic triads of methine protons overlap those of methylene protons in nondeuterated polymers, only isotactic triad intensities can be obtained from the ¹H-NMR spectra of nondeuterated poly(2-vinylpyridine). The ¹³C-NMR spectra of poly(2-vinylpyridine) were obtained in methanol and sulfuric acid solutions. In methanol solution the absorption was split into three groups, which cannot be explained by triads, and in sulfuric acid solution several peaks were observed. These splittings may be due to pentad tacticity. The results show that poly(2-vinylpyridine) obtained by radical polymerization is an atactic polymer.     

Investigation of a resorcinol–formaldehyde resin by 13C-NMR spectroscopy and intrinsic viscosity measurement

Various molecular weight fractions and oligomers isolated from a novolac type resorcinol–formaldehyde (RF) wood adhesive resin were studied by ¹³C-NMR, gel permeation chromatography (GPC), and intrinsic viscosity measurements. The ¹³C-NMR results indicate that methylene groups occur mostly between C₄–C′₄ and C₂–C′₄ carbons and in minor amounts between C₂–C′₂ carbons of resorcinol rings. By suppressing the nuclear Overhauser effect (nOe) and using a long delay time for ¹³C-NMR measurements, reasonable methylene/aromatic carbon ratios were obtained from the aromatic C₁ carbon patterns that have resulted from different numbers of methylene groups bonded on the aromatic ring. This analysis results indicate that the RF resin has an appreciable amount of branch structures and compare favorably with the gel permeation chromatography and intrinsic viscosity measurement results. © 1993 John Wiley & Sons, Inc.     

Characterization of chloroprene and maleic anhydride copolymer by 13C-NMR spectroscopy and pyrolysis GC/MS

The radical copolymerizations of chloroprene (CP) and maleic anhydride (MAH) were carried out with AIBN in 1,4-dioxane at 60°C. The monomer reactivity ratios were estimated as r₁ (CP) = 0.38 and r₂ (MAH) = 0.07. Microstructures in the copolymer of chloroprene (CP) and maleic anhydride (MAH) were investigated by 75.4 MHz ¹³C-and 300 MHz ¹H-NMR spectroscopies. Resonances were assigned to the monomer sequence dyads CC, CM, and MC (C = chloroprene, M = maleic anhydride). Well resolved fine structure in the ¹³C-NMR spectra showed that 1,2- and 3,4-structural chloroprene units were negligible in the copolymer. The pyrolysis characterization of the copolymer was also investigated by the pyrolysis gas chromatography mass spectrometry (GC/MS). The fragments of CP and MAH monomers and CP-MAH hybrid dimer, CO, and CO₂ were identified after pyrolysis of the copolymer. © 1994 John Wiley & Sons, Inc.     

Characterization of aromatic polymers (benzenoid and heterocyclic) by cross-polarization,magic-angle 13C-NMR spectroscopy

The cross-polarization, magic-angle ¹³C-NMR spectra of solid samples of poly(p-phenylene), its nitro derivative, polymerized biphenyl, poly(p-phenylene sulfide), poly(1-methyl-2,5-pyrrolylene), poly(1-phenyl-2,5-pyrrolylene), poly(2,5-thienylene), and poly(2,5-selenienylene) and the high-resolution ¹³C-NMR spectrum of poly(m-phenylene) in solution are presented and assigned. In all cases the chemical shifts are similar to those of model compounds in solution. In most instances the resonances of the nonprotonated carbon atoms in the solid polymers are more intense than those of the protonated carbons and appear to depend on the charge distribution in the molecular orbitals.     

Nucleosides, 45.-Assignment of glycosylation sites in o-hexopyranosyl-ribonucleosides by 13C-NMR

Evidence is presented that glycosylation of a ribose-OH group in nucleosides results in a significant downfield shift for the appended ¹³C nucleus and smaller upfield displacements for the adjacent carbons, providing an efficient tool for differentiating between 2′-$\text{o}$-, 3′-$\text{o}$- and 5′-$\text{o}$-glycosyl-ribonucleosides. Therewith, the products formed on enzymatic galactosylation of uridine, inosine, and adenosine are unequivocally assigned β(1→3)-glycosidic linkages ($\text{3a}$ – $\text{3c}$).     

Solvation of propanediol ions by water molecules in the gas phase

The thermochemical properties of protonated hydrates of 1,2- and 1,3-propanediols have been investigated using electrospray ionization-high pressure mass spectrometry. The binding enthalpies, entropies, and free energies of the stepwise hydration of protonated propanediols with one to three waters are reported. The observed negative entropy change [ΔΔS_1,3^o for the addition of the third water to 1,3-propanediol·H⁺(H₂O)₂ suggests a stable structure due to an increased number of hydrogen bonds and the loss of the intramolecular hydrogen bond in the water cluster ion. The thermochemical properties of two isomers of butanediol were also investigated in order to further elucidate the structures of the protonated propanediols.