Synthesis and characterization of optically active polyamides based on 2-(1,3-isoindolinedione-2-yl)glutaric acid by direct polycondensation

<正>Five new optically active polyamides(PAs) 6a-6e were prepared by direct polycondensation reaction of 2-(1,3- isoindolinedione-2-yl)-glutaric acid 4 as a new chiral diacid with various aromatic diamines 5a-5e in a medium consisting of triphenyl phosphite(TPP),calcium chloride,pyridine(Py) and N-methyl-2-pyrrolidone(NMP).The polycondensation reaction produced a series of polyamids 6a-6e in quantitative yields with inherent viscosities of 0.26-0.39 dL/g.The resulting polymers were fully characterized by means of ~1H-NMR,FT-IR spectroscopy,elemental analysis,inherent viscosity and specific rotation.Thermal properties of these polymers were investigated using thermal gravimetric analysis (TGA) and differential thermal gravimetry(DTG).Phthalimide rings as a bulky pendent group in the polymer chains disturb the interchain and intrachain interactions and make these PAs readily soluble in polar,aprotic solvents such as N,N-dimethyl acetamide(DMAc),N,N-dimethyl formamide(DMF),dimethyl sulfoxide(DMSO),N-methyl-2-pyrrolidone(NMP) and sulfuric acid.     

Sulfur-containing polymers. II. Preparation and properties of polycarbamoylsulfenamides

Polycarbamoylsulfenamides have been prepared by interfacial and solution polycondensation of chlorocarbonylsulfenyl chloride with diamines. In preparing the polycarbamoylsulfenamides, the following types of diamines were used: primary aliphatic diamines, a mixed primary-secondary aliphatic diamine, primary aromatic diamines, and secondary aromatic diamines. The properties of the resulting polymers depended primarily on the kind of diamines used. Transparent, tough films were obtained from the polymer based on N,N′-dimethyl-4,4′-diaminodiphenylmethane. The photochemical decomposition of the polymers has been studied.     

Synthesis and characterization of novel soluble and thermally stable polyamides based on pyridine monomer

Nucleophilic aromatic substitution reaction of 4-aminophenol and also 5-amino-1-naphthol with 2,6-dichloropyridine in N-methyl-2-pyrrolidone (NMP) as solvent, in the presence of potassium carbonate, afforded two aromatic ether diamines. Eight soluble, thermally stable polyamides were prepared by polycondensation reaction of the obtained diamines with aromatic and aliphatic diacid chlorides including terephthaloyl chloride (TPC), isophthaloyl chloride (IPC), adipoyl chloride (AC), and sebacoyl chloride (SC). The prepared monomers and polymers were characterized by conventional spectroscopic methods. Physical and thermal properties of the polymers, such as thermal behavior, thermal stability, solution viscosity, and solubility behavior were also studied.     

Aromatic poly(amide-ether)s containing naphthalene and methylene unites

1,5-Naphthene dioxy diacetic acid was synthesized from the reaction of 1,5-naphthalene diol and chloroacetic acid. It was used then as a bi-functiona l monomer in polycondensation reaction with aromatic diamines in the presence of tripnenylphosphite to produce poly(amide-ether)s. All the obtained polymers were characterized by IR and elemental analysis; their solubility behaviour was evaluated in polar organic solvents as well as in concentrated H₂SO₄. The extent of thermal stability and phase transitions of poly(amide- ether)s were investigated by thermogravimetric analysis and differential scanning calorimetry respectively; while the morphology was estimated by X-ray powder diffraction patterns. Besides, the fu-fu stacking character of polymer chain interactions in the solid state was confirmed by absorption spectra of solid thin films.     

Preparation,characterization and analysis of novel polyimides with anthracene,carbazole and fluorene pendent architecture

Two series of new organosoluble and thermally stable polyimides containing anthracene, and fluorene pendants were prepared by a two-step solution polycondensation reaction of new synthesized diamines with commercially available dianhydrides. All intermediates and polymers were fully characterized by FTIR, NMR, and elemental analysis and their properties including solubility and thermal stability were studied. All the resulting polymers were amorphous with inherent viscosities ranged from 0.61 to 0.84 dL/g and were readily soluble in many organic solvents.     

Synthesis and polycondensation of difunctional tetraazacyclododecanes

We have developed a method for getting the tetraazacyclododecane structure into the backbone of a macromolecular chain. Two different reaction processes were investigated: polycondensation from diacid macrocycles using activation of the acid functions by thionyl chloride and polycondensation from diester macrocycles by aminolysis with different aliphatic diamines. Cyclic and linear oligomers have been obtained by polycondensation of 1,7-di(ethylacetate)-4,10-ditosyl-1,4,7,10-tetraazacyclododecane with ethylenediamine and dodecanediamine. In both cases, we managed to get oligomers containing several macrocycle units into their backbone. Furthermore, these results highlighted the classical problem of the competition between cyclisation and macromolecular chain formation encountered during polycondensation reactions.     

New thermally stable and organosoluble heterocyclic poly(naphthaleneimide)s

As majority of polyheteroarylenes based on bis(naphthalic anhydrides), are difficult to process due to their infusiblity and insolubility in common organic solvents and solubility only in strong acids, this study is concerned with the synthesis and properties of new, easily processable polyimides and copolyimides containing naphthalene and oxadiazole rings. These polymers have been synthesized and their properties have been compared with regard to the influence of oxadiazole and naphthalene units on their physical properties. The polyimides were prepared by polycondensation reaction in solution of the aromatic diamines containing preformed oxadiazole ring with two dianhydrides having naphthalene units, at high temperature. Also, copolyimides were prepared by using a mixture of each naphthalene‐containing dianhydride, with hexafluoroisopropylidene‐dianhydride in the polycondensation reaction with the same diamino‐oxadiazoles. Most of the resulting polyimides and copolyimides were soluble in polar amidic solvents and in less polar solvents, and their solutions gave flexible films when spread onto glass plates. The thermal stability and glass transition temperature of these polyimides and copolyimides were measured and compared. The quality and the roughness of the spin‐coated films of these polymers were investigated by atomic force microscopy. The photoluminescence properties of the polymers in solution were studied to determine the color of emission. The UV absorption was also studied to determine the Stokes shift, and hence the possible reabsorption effects. The properties of the present polyimides make them attractive for applications in advanced optoelectronics and other related fields. Copyright © 2009 John Wiley & Sons, Ltd.     

Polyisophthalamides with phenylthio pendent groups

A series of polyisophthalamides containing pendent phenylthio groups was prepared from seven aromatic diamines and 5-phenylthioisophthalic acid by the phosphorylation polycondensation method. The properties of these polymers were compared with those of the analogous unmodified ones. The modified polymers exhibited better solubility in organic solvents than their unmodified counterparts. They also showed glass transition temperatures that were lower by approximately 30°C. However, the presence of the side groups did not bring about any substantial lowering of the thermal stability as measured by TGA. Other properties investigated were mechanical strength and water sorption.     

Intramolecular catalysis and cyclization in the reaction of α,ω-diaminooligomethylenes with bifunctional sulphonyl chloride. Effect of chain length on polycondensation reaction

As an elementary reaction of polycondensation reactions, rates of the reaction of 1,5-naphthalenedisulphonyl dichloride, a bifunctional fluorescent reagent, with excess α,ω-diaminooligomethylenes were measured by fluorometry in dilute solution. The rate constant, corresponding to that for the reaction of the first step of the polycondensation between the disulphonyl dichloride and the diamines, depended remarkably on the chain length of the diamines. By using 5-dimethylamino-1-naphthalenesulphonyl chloride, a monofunctional fluorescent reagent, and α-aminooligomethylenes, rates of model reactions between the monoamines and the monosulphonyl chloride, the diamines and the monosulphonyl chloride, as well as the monoamines and the disulphonyl dichloride were measured by fluorometry. The remarkable chain length dependence is explained by intramolecular catalysis by the primary amino group.     

Preparation of polythioamides from dialdehydes and diamines with sulfur by the Willgerodt–Kindler type reaction

Willgerodt–Kindler type reactions of dialdehydes and diamines in the presence of sulfur were investigated for preparation of polythioamides. The one‐pot, three‐component polycondensation afforded various polythioamides in moderate to good yields. The appropriate reaction conditions were examined for the separate monomers. The results led us to the proposed mechanism for the polycondensation including formation of the intermediate Schiff base polymers followed by the successive nucleophilic attack of polysulfide anions to the azomethine units to give the thioamide groups. Structure, solubility, and thermal properties of the polythioamides were also compared with those of analogous polyamides. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3739–3750, 2001     

Polyureas from carbon dioxide and diamines by means of triphenyl phosphite and pyridine hydrochloride

The reaction of carbon dioxide with aniline using triphenyl phosphite in pyridine is greatly facilitated by the addition of hydrochlorides of tertiary amines such as pyridine and triethylamine, and has been successfully applied to the preparation of polyureas of high molecular weight from carbon dioxide and aromatic diamines. The presence of a catalytic amount of pyridine hydrochloride significantly increased the inherent viscosity of the resulting polymers, the highest value being obtained with about an equivalent of the chloride. Optimal temperatures and pressures varied with diamines used, and were 60–80°C and 40–50 atm of carbon dioxide. The polycondensation reaction was also affected by the solvent compositions of pyridine and N-methylpyrrolidone, its optimum being dependent on diamines used.     

Copoly(amide—ester)s from p-aminobenzoic and hydroxybenzoic acids by the direct polycondensation with diphenyl chlorophosphate and LiCl

The reaction promoted by diphenyl chlorophosphate (DPCP) and LiCl was found to be effectively used for the preparation of aromatic polyesters with high molecular weights directly from hydroxybenzoic acids when the condensing agent was added dropwise. The reaction was successfully to the direct polycondensation reaction of p-aminobenzoic and hydroxybenzoic acids, giving high-molecular-weight copoly(amide—ester)s soluble in amide or phenolic solvents. Copolycondensations of isophthalic and terephthalic acids with bisphenols and aromatic diamines were also examined by adding the DPCP solution to a mixture of these monomers or by initial reaction of DPCP with the acids followed by dropwise addition of a mixture of bisphenols and the diamines. The latter stepwise reaction gave random copolymers soluble in amide and phenolic solvents. Thermal properties of these copolymers were studied.     

Copolyamide-imides of controlled microstructure. Effect of reaction conditions on regularity and properties

Aromatic polyamide-imides, based on trimellitimide and 4,4′-diphenylmethane and with different degrees of order, have been obtained from symmetric and asymmetric monomers. The polymers have been prepared by two general methods: (1) low temperature solution polycondensation of diamines and carboxylic acid derivatives; and (2) high temperature solution polycondensation of diisocyanates and dicarboxylic acids. High field ¹H-NMR has been used to elucidate the chemical structures of monomers and polymers and to estimate quantitatively the degree of order and the distribution of head-to-head, tail-to-tail (amide-amide, imide-imide) and head-to-tail (amide-imide) units. The influences of microstructure and other molecular features on some properties of the polymers have also been investigated.     

Phenothiaphosphine-containing polyamides and polyesters

Phosphorus-containing polyamides and polyesters, which had tricyclic fused rings (phenothia-phosphine rings) in the main chain, were prepared and the properties of the resulting polymers were examined. These polymers were obtained at highly reduced viscosities in satisfactory yields by the polycondensation of 2,8-dichloroformyl-10-phenylphenothiaphosphine 5,5,10-trioxide with aromatic diamines or bisphenols. The polyamides and polyesters were soluble in polar aprotic solvents such as dimethylacetamide and N-methyl-2-pyrrolidone; the polyesters were also soluble in chloroform. The polymers exhibited good heat resistance. The phenothiaphosphine-containing polyamides and polyesters self-extinguished immediately when flame was removed and were highly flame-resistant. The polyester obtained from bisphenol A showed a limiting oxygen index value of 43.5.     

Investigation of polyimides containing naphthalene units. III. Influence of monomers structure on polymers properties

A series of polymers from dinaphthalene dianhydrides and aromatic diamines has been synthesized using one-step high-temperature polycondensation. The influence of the monomers structure on the polymers properties has been investigated. © 1997 John Wiley & Sons, Inc.     

Active polycondensation of diethyl 2,3,4,5-tetrahydroxyadipate with diamines

Polycondensation of diethyl 2,3,4,5-tetrahydroxyadipate with various diamines was carried out in solutions under mild conditions. The polycondensation reaction occurred rapidly even at room temperature in polar solvents such as alcohols, and in aqueous solution a cyclic product was obtained instead of linear polymers although the reaction with diamines was completed within several minutes. Polymers obtained from diethyl 2,3,4,5-tetrahydroxyadipate were a linear polyamide having pendant hydroxyl groups, which decomposed on heating at around 200°C. A solid-phase polycondensation of the precursor polyamide yielded a high molecular weight polyamide.     

Synthesis and characterization of optically active and organosoluble poly(amide-imide)s containing imidazole rings as pendent groups by direct polycondensation

Six new optically active poly(amide-imide)s(PAIs) 6a-f were prepared by direct polycondensation reaction of N-trimelli-tylimido-L-histidine 4 as a chiral diacid with various aromatic diamines 5a-f.Triphenyl phosphite(TPP)/pyridine(Py) in the presence of calcium chloride(CaCl2) and N-methyl-2-pyrrolidone(NMP) were successfully applied to direct polycondensation reaction.The resulting new polymers were in good yields,and had inherent viscosities ranging between 0.29 and 0.41 dL g-1 and were detected with elem...     

Synthesis and characterization of soluble aromatic polyamides derived from 2,5-bis-(4-chloroformylphenyl)—3,4-diphenylthiophene and aromatic diamines

A new polymer-forming monomer, 2,5-bis(4-carboxyphenyl)—3,4-diphenylthiophene, was synthesized either by the Friedel—Crafts reaction of tetraphenylthiophene with oxalyl chloride directly, or by the Friedel—Crafts acetylation of tetraphenylthiophene, followed by oxidation. The low temperature solution polycondensation of 2,5-bis(4-chloroformylphenyl)—3,4-diphenylthiophene with various aromatic diamines in N,N-dimethylacetamide (DMAc) afforded tetraphenylthiophene-containing aromatic polyamides with inherent viscosities of 0.5–1.0 dL/g. Copolyamides were obtained from a mixture of the diacid chloride and isophthaloyl or terephthaloyl chloride. Except for two polyamides, all the others were readily soluble in amidetype solvents including DMAc, and were cast into transparent and flexible films. These polymers had glass transition at around 300°C. Thermal stability of the polymers was evaluated by thermogravimetry which showed no weight loss below 390°C in both air and nitrogen atmospheres.     

Sulfur-containing polymers. XVIII. Preparation and properties of thiuram polysulfide polymers

Thiuram polysulfide polymers have been prepared from alkali metal bisdithiocarbamates either by oxidation with ammonium persulfate or by polycondensation with sulfur chlorides. In some cases, isothiocyanate formation and/or thiourea formation were noticed. The polymer properties were significantly affected by the diamines used. Polymers derived from p-phenylenediamine decomposed gradually at room temperature with the liberation of elemental sulfur. Polymers based on aliphatic primary diamines were more stable. Piperazine gave the most stable polymer.     

Synthesis of aliphatic–aromatic polyamides by palladium-catalyzed polycondensation of aliphatic diamines,aromatic dibromides,and carbon monoxide

Aliphatic–aromatic polyamides were synthesized by the palladium-catalyzed polycondensation of aliphatic diamines, aromatic dibromides, and carbon monoxide. The effects of variables, such as the kind and amount of base, reaction temperature, and the kind of palladium catalyst were investigated in detail on the reaction of hexamethylenediamine and bis(4-bromophenyl) ether with carbon monoxide. Inherent viscosities of the polyamides were between 0.13 and 1.21 dL/g and varied markedly with the structure of the diamine component. Solubility of the polyamides decreased with increase of chain length of aliphatic diamines, and the polyamides derived from p-dibromobenzene was insoluble in organic solvents except for m-cresol. Polyamides obtained from primary aliphatic diamines began to decompose at 210–250°C in air due to decomposition of the aliphatic chain.