聚苯乙烯大单体与乙酸乙烯酯的共聚及其接枝共聚物的表征

 研究了聚苯乙烯大单体与乙酸乙烯酯的溶液聚合,结果表明,接枝效率随引发剂用量、聚合温度及小单体与大单体的投料比的增加而增加,随大单体的分子量增加而减少,而随单体浓度的变化呈现一最大值。共聚过程中大单体的转化率开始较小单体的增加快,后期变慢。用萃取法纯化的接枝共聚物经GPC、IR、¹H-NMR及PGC等表征,并算得平均接枝数为4—7。透射电镜表明接枝共聚物中存在微观相分离。     

聚苯乙烯大单体与乙酸乙烯酯的共聚及其接枝共聚物的表征

研究了聚苯乙烯大单体与乙酸乙烯酯的溶液聚合,结果表明,接枝效率随引发剂用量、聚合温度及小单体与大单体的投料比的增加而增加,随大单体的分子量增加而减少,而随单体浓度的变化呈现一最大值。共聚过程中大单体的转化率开始较小单体的增加快,后期变慢。用萃取法纯化的接枝共聚物经GPC、IR、~1H-NMR及PGC等表征,并算得平均接枝数为4—7。透射电镜表明接枝共聚物中存在微观相分离。     

On the kinetics and mechanism of copolymerization of vinyl acetate and itaconic monomers

The introduction of anionic hydrophylic groups in the pendant chain of polyvinyl alcohol improves its surface and adhesive properties. For the purpose of synthesizing raw materials for preparation of modified polyvinyl alcohol with enhanced performance characteristics, the copolymerization of vinyl acetate with itaconic acid and diethyl itaconate at concentrations up to 9 mol % in methanol solution using azo-bis-isobutyronitrile and tert-butylcyclohexylperoxydicarbonate as initiators has been studied. The experiments were performed using two different methods of addition of the itaconic monomer—single, at the beginning of the process, and continuous. It was established that the process rate decreases as the quantity of the second comonomer increases. The reaction order in terms of itaconic acid ( ?2, 95) and reactivity ratios for both pairs vinyl acetate and itacinic acid (r₁ = 0.053 and r₂ = 31) and vinyl acetate and diethyl itaconate (r₁ = 0.125 and r₂ = 18) were determined. The products obtained were characterized by IR and NMR. It was confirmed that for the case of single addition at the beginning of the process a two-phase system is formed while the continuous addition resulted in random group distribution.     

New Methacryloxy N‐Vinyl‐2‐pyrrolidinone‐ and Lactone‐Based Macromers

New ω‐methacryloxy‐terminated N‐vinyl‐2‐pyrrolidinone oligomers were prepared by reaction of the corresponding ω‐hydroxy‐terminated N‐vinyl‐2‐pyrrolidinone oligomers with 2‐[(1‐imidazolyl)formyloxy] ethyl methacrylate (HEMA‐Im). The oligomeric precursor had been obtained by radical chain transfer polymerization making use of isopropoxyethanol as a solvent and a chain transfer agent. α,ω‐Dimethacryloxy‐terminated ε‐caprolactone and δ‐valerolactone oligomers were also prepared by reaction of their α‐hydroxy‐ω‐methacryloxy‐terminated precursors with HEMA‐Im. These had been in turn synthesized by ring‐opening polymerization of the corresponding lactones in the presence of 2‐hydroxyethyl methacrylate as the initiator and tin octanoate as the catalyst. Due to the presence of methacrylic functions at their chain ends, both VP and lactone oligomers participate in radical polymerization reactions and can be therefore classified as radical macromers. Both macromer families have several potential applications, such as use in the synthesis of mixed hydrophilic/hydrophobic hydrogels. All macromers were characterized by NMR spectroscopy and size‐exclusion chromatography (SEC). The polymerization kinetics of the lactone macromers were also analyzed by ¹H NMR spectroscopy.     

Photopolymérisation de macromères multifonctionnels—I. Étude Cinétique

Highly crosslinked polymers have been obtained by photopolymerization of multiacrylate macromers under intense u.v. or laser irradiation. The marked inhibitory effect of O₂ was quantitatively evaluated by a kinetic study of these ultra-fast reactions by i.r. spectroscopy. The rate of polmerization (R_p) and the amount of residual unsaturation in the cured polymer were shown to depend primarily on the nature of the macromer chain and on the functionality of the monomer used as diluent. Despite the high rate of initiation, polymerization develops effectively, with large quantum yields: θ_p = 8300 polymerized units per photon absorbed for irradiations in N₂. The linear relationship between R_p and light-intensity strongly suggests a polymerization mechanism based on monomolecular termination.     

Internal Transfer Reactions in the Copolymerization of Vinyl Acetate with Chlorinated Monomers

In the copolymerization of vinyl acetate (A) with either vinyl chloride (C) or vinylidene chloride (V), an internal transfer (backbiting) reaction—of the C- or V-ended radi-cals on an antepenultimate A unit—is proposed to be responsible for the deviation of the copolymerization kinetics from the Lewis and Mayo theory. The deviations disappear if A is replaced by isopropenylacetate [I_p], Then one gets, for the I_p -C copolymerization. r_{I p} =0.35 and :r_c=2.4, and for I -V copolymerization, r_{I p}=0.13 and r_v=5.9. The internal transfer reaction causes the formation of branches which may be evidenced by NMR analysis of constant composition suspension A-C copolymers. A kinetic scheme is proposed and the corresponding reactivity ratios derived r_A=0.29, r_c=1.60, r=0.3 (radical resulting from the transfer reaction), and k_T=1500 (rate constant of the transfer reaction at 50°C). The distribution of branches is calculated together with the sequence distribution functions for the .A. or Cunits.     

Reactivity ratios for copolymerization of vinyl chloride with 2-methylpentyl vinyl brassylate by computerized linearization

A computerized version of the Fineman-Ross linearization procedure was used to determine reactivity ratios for copolymerization of vinyl chloride (monomer 1) and 2-methylpentyl vinyl brassylate (monomer 2). From differential refractometry data for the products of low-conversion copolymerization, the procedure gave r₁ = 1.06 and r₂ = 0.234. The ratios computed from chlorine contents of the same products were r₁ = 1.10 and r₂ = 0.239. The polarity factor (e₂) and general monomer reactivity (Q₂) calculated for monomer 2 from these ratios were, respectively, ?0.95 to ?0.98 and 0.032–0.033. The interquartile range for the copolymerization of a mixture of 60% monomer 1 and 40% monomer 2 was 1.4%. These values suggest that from suitable proportions of reactants, sufficiently homogeneous distribution of monomers can be achieved in copolymers of vinyl chloride and 2-methylpentyl vinyl brassylate to offer the possibility of effective internal plasticization.     

Emulsion polymerization and copolymerization of vinyl benzoate

Emulsion polymerization of vinyl benzoate and its copolymerization with vinyl acetate or styrene are described. The effect of the potassium persulfate initiator, and the sodium lauryl sulfate emulsifier concentration on the rate of vinyl benzote homopolymerization and the molecular weight of the polymers was determined. In copolymerization with vinyl benzoate, both comonomers, vinyl acetate and styrene, decrease the initial polymerization rate. With increasing amounts of styrene in the comonomer mixture the polymerization rate increases but with vinyl acetate an opposite effect is observed. Reactivity ratios of copolymerizations were determined. For the vinyl benzoate [M₁]-styrene [M₂] comonomer system a r₁ = 0.03 and a r₂ = 29.58 and for vinyl benzoate [M₁]-vinyl acetate [M₂], a r₁ = 1.93 and a r₂ = 0.20 was obtained. From the vinyl benzoate-styrene reactivity ratios the Qe parameters were calculated.     

Polymerization of vinyl chloride and copolymerization with carbon monoxide by a new initiator

The system comprising the ethoxydized product of triethylaluminum, cuprous chloride, and carbon tetrachloride was used as an initiator for polymerization of vinyl chloride, and the polymerization kinetics was studied. From plots of the molar number of number-average polymer chain Y/P? versus yield Y, the two parameters a ( = ∫ R_idt ? 1/2 ∫ R_tdt) and b ( = ∫ R_trdt/∫ R_pdt) were estimated to be 6 × 10^?3 mole/l. and 6.6 × 10^?4 respectively. Studies of the tacticity of the poly(vinyl chloride) showed isotactic = 49.3% and syndiotactic = 50.7%. The present initiator also permitted copolymerization of vinyl chloride with carbon monoxide; the monomer reactivity ratios were r₁ = 0.40 (vinyl chloride) and r₂ = 0.01 (carbon monoxide).     

Free‐radical copolymerization of vinyl esters using fluoroalcohols as solvents: The solvent effect on the monomer reactivity ratio

Free‐radical copolymerizations of vinyl acetate (VAc = M₁) and other vinyl esters (= M₂) including vinyl pivalate (VPi), vinyl 2,2‐bis(trifluoromethyl)propionate (VF6Pi), and vinyl benzoate (VBz) with fluoroalcohols and tetrahydrofuran (THF) as the solvents were investigated. The fluoroalcohols affected not only the stereochemistry but also the polymerization rate. The polymerization rate was higher in the fluoroalcohols than in THF. The accelerating effect of the fluoroalcohols on the polymerization was probably due to the interaction of the solvents with the ester side groups of the monomers and growing radical species. The difference in the monomer reactivity ratios (r₁, r₂) in THF and 2,2,2‐trifluoroethanol was relatively small for all reaction conditions and for the monomers tested in this work, whereas r₁ increased in the VAc‐VF6Pi copolymerization and r₂ decreased in the VAc‐VPi copolymerization when perfluoro‐tert‐butyl alcohol was used as the solvent. These results were ascribed to steric and monomer‐activating effects due to the hydrogen bonding between the monomers and solvents. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 220–228, 2000     

Modular material system for the microfabrication of biocompatible hydrogels based on thiol–ene‐modified poly(vinyl alcohol)

Novel modifications of the synthetic polymer poly(vinyl alcohol) (PVA) were developed for application in the field of biomedical engineering. PVA was modified with allyl succinic anhydride, norbornene anhydride as well as with γ‐thiobutyrolactone to produce macromers with reactive ene and thiol groups, respectively. Cytotoxicity studies have shown that the material exhibits almost no cell‐toxicity, when used in concentrations of 1 and 0.1 wt % for 24 h. The obtained macromers were photocrosslinked via thiol–ene chemistry. Storage stability of the macromer mixtures with different concentrations of pyrogallol as stabilizer were investigated. Photorheometry was employed to optimize mixtures concerning reactivity based on their thiol‐to‐ene ratio, photoinitiator concentration, and macromer content. The crosslinked hydrogels were studied concerning their swellability. To form hydrogels with cellular structure two‐photon‐polymerization (2PP) was employed. Processing windows for 2PP of selected mixtures were determined. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2060–2070     

Using hyperbranched macromers as crosslinkers of methacrylic networks prepared by photopolymerization

Hyperbranched polymers were modified with terminal methacryloyl groups to be used as crosslinkers. The photoinitiated polymerization of several methacrylic monomers was examined in the presence of the hyperbranched macromers and bis-(2,4,6-trimethylbenzoyl)-phenylphosphine oxide (Irgacure 819^®) as a photoinitiator, upon UV irradiation. The photopolymerization kinetics was systematically studied by fluorescence and photoDSC in real time and in situ. Six types of monofunctional methacrylic monomers, two types of difunctional methacrylic monomers and four types of (meth)acrylate-modified hyperbranched macromers with different structures were employed for series of photopolymerization reactions. The incorporation of the hyperbranched macromers allows to increase the conversion at gelation and thus, final conversion. This behaviour is dependent on monomer and macromer nature and has been explained as due to an increase of the free volume fraction and confirmed by fluorescence. The results indicate that H-bonding and π-stacking induce self-assembly of hyperbranched macromers leading to reaction induced phase separation at the highest concentration of hyperbranched macromer used.     

Radiation-induced copolymerization of tetrafluoroethylene with vinyl ethers

Radiation-induced copolymerization of tetrafluoroethylene with various vinyl ethers has been studied. It was found that tetrafluoroethylene can be copolymerized with vinyl ethers to give alternating copolymers over a wide range of the initial monomer concentration in the monomer mixture. The monomer reactivity ratios were determined for the copolymerization of tetrafluoroethylene with n-butyl vinyl ether as 0.005 (r_TFE) and 0.0015 (r_NBVE). The rate of copolymerization is extremely high and has a maximum at an equimolar concentration of two monomers. The alternating structure of the copolymers was confirmed by the analysis of NMR spectra. Some thermal properties of the copolymers were measured by DSC and DTA.     

Vinylhydroquinone. III. Copolymerization of vinylhydroquinone and vinyl monomers by tri-n-butylborane

The copolymerization of vinylhydroquinone (VHQ) and vinyl monomers, e.g., methyl methacrylate (MMA), 4-vinyl-pyridine (4VP), acrylamide (AA), and vinyl acetate (VAc), by tri-n-butylborane (TBB) was investigated in cyclohexanone at 30°C under nitrogen. VHQ is assumed to copolymerize with MMA, 4VP, and AA by vinyl polymerization. The following monomer reactivity ratios were obtained (VHQ = M₂): for MMA/VHQ/TBB, r₁ = 0.62, r₂ = 0.17; for 4VP/VHQ/TBB, r₁ = 0.57, r₂ = 0.05; for AA/VHQ/TBB, r₁ = 0.35, r₂ = 0.08. The Q and e values of VHQ were estimated on the basis of these reactivity ratios as Q = 1.4 and e = ?;1.1, which are similar to those of styrene. This suggests that VHQ behaves like styrene rather than as an inhibitor in the TBB-initiated copolymerization. No homopolymerization was observed either under nitrogen or in the presence of oxygen. The reaction mechanism is discussed.     

Studies of the polymerization of diallyl compounds. XXVII. Copolymerization of diallyl tartrate with several vinyl monomers

The radical copolymerization of diallyl tartrate (DATa) (M₁) with diallyl succinate (DASu), diallyl phthalate (DAP), allyl benzoate (ABz), vinyl acetate (VAc), or styrene (St) was investigated in order to disclose in more detail the characteristic hydroxyl group's effect observed in the homopolymerization of DATa. In the copolymerization with DASu or DAP as a typical diallyldicarboxylate, the dependence of the rate of copolymerization on monomer composition was different for different copolymerization systems and unusual values larger than unity for the product of monomer reactivity ratios, r₁r₂, were obtained. In the copolymerization with ABz or VAc (M₂), the r₁ and r₂ values were estimated to be 1.50 and 0.64 for the DATa/ABz system and 0.76 and 2.34 for the DATa/VAc system, respectively; the product r₁r₂ for the latter copolymerization system was found again to be larger than unity. In the copolymerization with St, the largest effect due to DATa monomer of high polarity was observed. Solvent effects were tentatively examined to improve the copolymerizability of DATa. These results are discussed in terms of hydrogen-bonding ability of DATa.     

Syntheses of Vinyl Sulfoxide/Vinyl Acetate-Type Copolymers

The homopolymerization of a series of alkyl vinyl sulfoxides (CH₂[dbnd]CHSOR; R = CH₃ (MVSO), C₂H₅ (EVSO), t-C₄H₉ (BVSO)) and their copolymerization with vinyl acetate (VAc) with 2,2′-azobisisobutyronitrile (AIBN) as initiator at 60°C was attempted. MVSO was found to homopolymerize radically, but EVSO and BVSO were not. Poly-MVSO is soluble in chloroform, methanol, DMSO, and water, but insoluble in acetone and benzene. MVSO and EVSO were found to copolymerize with VAc, but BVSO was not. The copolymerization parameters obtained for both systems were as follows; r₁(MVSO) = 2.23, r₂ (VAc) = 0.09, and r₁(EVSO) = 3.40, r₂ (VAc) = 0.11, respectively. MVSO/vinyl alcohol (VA) copolymers were obtained through the saponification of MVSO/VAc copolymers by sodium hydroxide in methanol. The solubility of MVSO/VAc and of MVSO/VA copolymers toward various solvents was examined, and it was observed that the sulfoxide comonomer has a tendency to give amphiphilicit to poly(vinyl acetate) and poly(vinyl alcohol). The 24 mol% MVSO containing VAc copolymer is soluble in both benzene and water.     

Quantitative Determination of the Contribution of Charge‐Transfer Complex in the Microemulsion Copolymerization of N‐Butyl Maleimide and Styrene

By using sodium dodecyl sulfate (SDS) and pentanol (PTL) as emulsifiers, the oil‐in‐water microemulsion containing N‐butyl maleimide (NBMI, M₁) and styrene (St, M₂) was prepared. The microemulsion copolymerization using potassium persulfate (KPS) as an initiator was investigated. On the basis of kinetic model proposed by SHAN Guo‐Rong, the reactivity ratios of free monomers and the charge‐transfer complex (CTC) in the copolymerization were found to be r₁₂ = 0.0420, r₂₁ = 0.0644, r_1C = 0.00576 and r_2C = 0.00785, respectively. A kinetic treatment based on this model was used to quantitatively estimate the contribution of CTC to the total copolymerization rate in the NBMI/St copolymerization. It was about 17.0–20.0% for a wide range of monomer feed ratios.     

Phenolic resins for solid-phase peptide synthesis: Copolymerization of styrene and p-acetoxystyrene

Details are given of the synthesis and purification of p-acetoxystyrene and its solution and suspension copolymerization with styrene. Reactivity ratios, evaluated by the Tidwell-Mortimer method, were r₁ (p-acetoxystyrene) = 1.18, and r₂ (styrene) = 0.88 for (bulk) solution copolymerization. Corresponding values of the reactivity ratios for suspension copolymerization were, within experimental error, indistinguishable from unity. Thus the copolymer composition is governed simply by the monomer feed composition. Use of a specially designed reactor vessel permits convenient suspension copolymerization of styrene, p-acetoxystyrene, and divinylbenzene to give crosslinked resins having comparatively narrow particle size distributions. Acetoxy groups in the crosslinked resin are cleaved by hydrazine hydrate under very mild conditions to give crosslinked polystyrenes having phenolic groups which, in turn, provide a useful alternative to the more usual chloromethylated polystyrene resins for solid-phase peptide synthesis.     

Effect of the substituents on radical copolymerization of dialkyl fumarates with some vinyl monomers

Radical copolymerization of dialkyl fumarates (DRF) with various vinyl monomers was carried out in benzene at 60°C. The monomer reactivity ratios, r₁ and r₂, were determined from the comonomer-copolymer composition curves. The relative reactivity of DRFs with various ester substituents toward a polystyryl radical was revealed to depend on both steric and polar effects of the ester groups. It has also been clarified that α-substituents of the polymer radical have a significant role in addition of DRF, from the comparison of the monomer reactivity ratios determined in copolymerizations with monosubstituted and 1,1-disubstituted ethylenes. The absolute cross-propagation rate constants were also evaluated and discussed. © 1992 John Wiley & Sons, Inc.     

Synthesis of networked polystyrene endowed with nucleophilic reaction sites by the living anionic polymerization technique

The living anionic copolymerization of styrene with 1,2‐bis(4′‐ethenylphenyl)ethane (1) or p‐divinylbenzene (PDVB) with sec‐butyllithium in benzene was carried out. The copolymerizations of styrene with more than 20 mol % of 1 gave insoluble polymers in quantitative yields, whereas the yield showed the maximum (97%) for PDVB at 15 mol %. The content of unreacted double bonds of the network polymer formed by the copolymerization with PDVB was four times as large as that formed with 1. Gas chromatographic analyses of the copolymerization suggested close reactivities of the double bonds between styrene and 1, whereas a rapid consumption of PDVB compared with styrene was observed in their copolymerization. The r₁, r₂,and r₁r₂ values for the copolymerization of styrene with 1 were determined to be 1.00, 1.09, and 1.09, respectively, which suggests that a more homogeneous network structure can be attained with 1. The living chain end of the produced living gel initiated the polymerization of tert‐butyl methacrylate to give an insoluble block copolymer in a good yield. The hydrolysis of the ester group of the block copolymer led to an amphiphilic copolymer that exhibited a characteristic property of a hydrogel. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2543–2547, 2000