A study of some deactivation methods for fused silica capillary columns by CP-MAS NMR and capillary gas chromatography

The effect of deactivating a fused silica surface by silylation with 1,1,3,3-tetraphenyl-1,3-dimethylilazane (TPDMDS), triphenylsilylamine (TPSA), and octamethylcyclotetrasiloxane (D4) and by polydimethylsiloxane degradation (PSD) is studied. Rehydrated, dried, and deactivated Cab-O-Sil M5 samples are used as model materials for ²⁹Si CP-MAS NMR analysis. At about 350 °C, TPDMDS yelds mainly diphenylmethylsiloxysilane, dimethyldisiloxysilane, and triphenylsiloxysilane groups. TPSA yields phenyltrisiloxysilane, diphenyldisiloxysilane, and triphenylsiloxysilane groups. At 400°C, the products formed initially are eventually replaced by methyltrisiloxysilane or phenyltrisiloxysilane groups, while a substantial number of silanol groups still remains. The possible consequences for wettability are discussed. D4 reacts with Cab-O-Sil even at 200°C, but a large number of silanol groups remains. This number decreases gradually at higher temperatures and becomes negligible above 400°C. The formation of methyltrisiloxysilane groups, which starts at 425°C, is predominant at 490°C.     

Fused silica capillary micro-packed columns in gas chromatography

Summary Flexibility, strength and adsorption inertness of fused-silica capillaries permits their extensive application for the preparation of micro-packed columns in gas chromatography. Decreasing the column diameter (from 0.5 to 0.15 mm) and the diameter of the sorbent particles (from 100 to 5 μm) results in a marked reduction of the height equivalent to a theoretical plate (HETP), as well as in diminishing the dependence of the HETP on the carrier gas flow rate. The chromatographic characteristics of fused-silica capillary micro-packed columns and open-tubular columns are compared. The fused-silica capillary micro-packed column can be used to advantage for performing rapid and trace analyses and have been shown to be adapted for application in gas-solid chromatography. Separation of organic and inorganic compounds on fused-silica capillary micro-packed columns is illustrated by practical examples. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Some applications of capillary gas chromatography in the chemical industry

About three years ago, fused silica capillary columns were introduced in the Quality Control Laboratory of the Shell refinery/chemical complex at Pernis. In general, long, thick-film, wide-bore capillary columns are used together with low split ratios and hydrogen as carrier gas. These conditions enable the analysis of relatively large sample amounts, resulting in low detection limits for the minor components without overloading by the major components, while still maintaining a satisfactory resolution. A number of applications are shown, such as the analysis of complex mixtures, the determination of trace impurities and the analysis of residual volatiles in polymers.     

Construction and application of a cold on-column injection system for capillary gas chromatography

A cold on-column injection system for capillary gas chromatography (GC) applications was constructed. It was based upon a conventional split/splitless capillary GC inlet, which in turn was a modification of a conventional packed GC column inlet. The heart of the laboratory constructed cold on-column inlet design was a disposable pyrex micro-sampling pipet, which functioned as a needle guide for sample injection. The sample was injected through a traditional GC septum. Construction of the injection system is described and applications are illustrated by separations of a variety of complex mixtures.     

Column switching applied to capillary gas chromatography/fourier transform infrared spectroscopy

A dual oven gas chromatograph incorporating a micro, mechanical switching valve has been interfaced to an FTIR spectrometer. With this system, each oven can be operated with independent temperature control. Complete choice of the columns' type and capacity gives flexibility in the separation prior to spectroscopic evaluation. An application which demonstrates some of the advantages of column switching in GC/FTIR is presented. Minor sample components have been successfully analyzed by heart-cutting the appropriate section of the separation from a high to a low capacity column. In this way, the dynamic range of the technique is effectively increased while an efficient chromatographic inlet to the FTIR is maintained.     

Enzyme activity determination by radio gas chromatography on capillary columns

Androgen 5α-reductase from the foreskin of 48 boys in prepubertal age was analyzed by evaluation of the apparent K_m-and V_max- values after tissue incubation. Reaction rates were calculated after determination of specific radioactivity of distinct metabolites, by comparison to the radioactivity of the precursor. Reaction products were separated by radio gas chromatography on capillary columns. The chromatography system was based on multicolumn equipment with column switching facilities and a variable splitter at the outlet of the separation column. A radioactivity monitor (gas proportional counter) was used for measurement of radioactivity in the column effluents. An electron capture detector was used for mass detection of steroid acyl derivatives.     

Synthesis of siloxane stationary phases for capillary gas chromatography and supercritical fluid chromatography

A comparison is made between dichlorosilanes and cyclic siloxanes as starting materials in the synthesis of stationary phases for capillary gas chromatography (CGC) and supercritical fluid chromatography (SFC). Siloxanes containing one or more of the side groups methyl, vinyl, phenyl, and cyanoethyl in various ratios were synthesized and compared. These phases were characterized by chromatographic (gel permeation, GPC), spectroscopic (IR, ¹H NMR, ²⁹Si NMR), and thermal (DSC) methods. Coated fused silica columns were evaluated with respect to polarity, crosslinkability with several free-radical initiators, and thermal stability. A new liquid phase, 7% cyanoethyl, 7% phenyl, 1% vinyl methyl polysiloxane is shown to be more polar than OV-1701, more temperature stable, easily crosslinked and suitable for use in supercritical fluid chromatography.     

Some aspects of quantification of neutral steroid metabolites in body fluids of healthy and uremic subjects by capillary gas chromatography

Neutral steroid metabolites enriched from urine and hemofiltrate were identified by gas chromatography/mass spectrometry and quantified by capillary gas chromatography. This study included 20 healthy controls and 37 uremic patients. Before enrichment of steroids from biological material, the standard deviation of the workup procedure and subsequent derivatization into the trimethylsilyl-enol-trimethylsilyl ethers was tested and found to be 2–5% in urine and 12–17% in the more complicated workup procedure of hemofiltrate, but essentially smaller than the biological standard deviation. Compared to the 24 h urinary excretion rates of controls, the excretion rates of androsterone, etiocholanolone, and corticoid metabolites were significantly lower in uremic body fluids, while those of 11-oxygenated androstanolones, degradation products of corticoids, were enhanced in uremic urine. The ratio of corticoid metabolites to 11-oxygenated androstanolones in urine of nondialyzed uremics correlated significantly with their plasma creatinine levels.     

Analysis of toxic anthraquinones and related compounds with a fused silica capillary column

In this study, application of a fused silica capillary column for analysis of toxic anthraquinones and related compounds found in plants was investigated.     

Fourier transform ion mobility spectrometry of barbiturates after capillary gas chromatography

This paper demonstrates a novel operating mode of an ion mobility detector (IMD) for obtaining both qualitative and quantitative data after capillary gas chromatographic separation of 5,5′-disubstituted barbiturates. Using a recently developed time dispersive Fourier transform method for ion mobility spectrometry, complete ion mobility spectra could be obtained for each component in the chromatogram. This type of spectra can be used for providing qualitative information on unknown compounds or for selecting the proper detector conditions needed when operating in the continuous mobility monitoring mode. In this study each of the five barbiturates investigated produced a Fourier transformed ion mobility spectrum containing one major product ion. When drift times corresponding to those of the product ions measured in the FT mode were monitored continuously, selective chromatographic detection of the barbiturates was achieved. In one case even isomers could be differentiated based on mobility characteristics.     

On-line multidimensional chromatography using packed capillary liquid chromatography and capillary gas chromatography

The introduction of selected fractions from a liquid chromatograph into a gas chromatograph has been described; however, analyses were performed by off-line experiments requiring collection and reinjection of the separate fractions or by on-line procedures where disadvantageously, only a fraction of the separated peak or a well resolved component in a mixture could be introduced into a gas chromatograph. This disadvantage is overcome by the apparatus and method described in this paper, which utilizes a multidimensional chromatography system employing a high efficiency, packed capillary LC column coupled on-line to a capillary gas chromatograph. The liquid chromatograph (so designed) can act as a highly efficient clean-up or chemical class fractionation step prior to introduction into the gas chromatograph, significantly reducing sample preparation times in many applications. Thus minor components in a complex matrix can be determined without prior sample clean-up, an example of which is the determination of polychlorinated biphenyls in a complex hydrocarbon matrix.     

Deactivation of fused silica capillary columns with phenylhydrosiloxanes

In this work, an investigation of new organosilicon hydride reagents with phenyl functional groups for deactivation and surface modification of fused silica capillary columns is described. Different reagents were tested for their ability to deactivate the fused silica surface, and actual critical surface tension measurements were made using the capillary rise method. The deactivation procedure required lower optimum temperatures than conventional methods. Deactivated capillaries and coated capillary columns were prepared and tested for reproducibility, efficiency, and surface inertness towards basic and acidic compounds at the low nanogram level.     

Analysis of mutagenic amino acid pyrolyzates with a fused silica capillary column

In this study, application of a fused silica capillary column for analysis of major mutagenic heterocyclic compounds found in cooked foods was investigated.     

Distribution of weight,density, and molecular weight in crude oil derived from computerized capillary GC analysis

Chromatographic separation of crude oil components has been performed on a 50 m Chrompack Sil 5 fused silica capillary column, temperature programmed from 10 to 300°C. Approximately 70 peaks eluting before n-nonane (n-C₉) and all normal paraffins to n-C₁₉ were identified by a retention time table. Peak areas were converted to weight % using 1-heptene as internal standard and relative response factors. Components were divided into boiling range groups from n-C₆ to n-C₁₉. Paraffinic, naphthenic, and aromatic distributions were obtained for the boiling point fractions up to n-C₉. Group average densities and molecular weights were calculated from pure component properties up to n-C₉. Knowing the density and molecular weight as functions of boiling range group to n-C₉, these functions can be extrapolated to n-C₁₉, based on data and correlations from more than 20 distillations of paraffinic North Sea oils adn condensates. The densities and molecular weights of the C₁₀+ and the C₂₀+ residues were calculated to satisfy a balance of weight, volume, and number of moles for the whole sample. Measurements on the residues were used to cross-evaluate the GC method against distillation. The difference in weight was estimated to be less than ± 0.5% in absolute terms for the C₁₀+ residue. The corresponding figure for C₂₀+ was ± 2%. Relatively, calculated densities are within ± 1%, molecular weights within ± 2% compared to direct measurements. Calculations were performed by a BASIC program in a GC interfaced computer.     

Preparation,evaluation, and comparison of wide bore (320 μm) and narrow bore (50 μm) cyanosilicone-coated capillary columns for gas chromatography

The preparation of wide bore (320 μm) and narrow bore (50 μm) fused silica capillary columns is described for immobilized cyanopropyl substituted silicones containing 60 and 88% substitution. The effect of high temperature deactivation with cyanopropylcyclosiloxanes was studied with a special test mixture. Curing was achieved with dicumyl peroxide or azo-tert-butane. The columns were evaluated and compared in terms of efficiency, activity, polarity, and temperature stability. Different coating methods were compared for the narrow bore columns. The activity of the 60% cyanopropyl columns that had been immobilized with dicumyl peroxide was significantly larger than for azo-tert-butane immobilized columns. The polarity of polar columns appeared to depend greatly on column temperature and is completely different for wide and narrow bore columns.     

High resolution chemically bonded fused-silica capillary gas chromatography of organochlorine insecticides and related compounds in arable soil samples

Electron capture gas chromatography with three chemically bonded fused-silica capillary columns (CB-FSCs), OV-17, OV-1701, and SE-52, was performed to evaluate peak separability of 28 organochlorine insecticides and related compounds. Relative retention times and relative peak heights to aldrin were measured and calculated. OV-17 CB-FSC showed the best separability among the three CB-FSCs employed and was applied to analysis of extracts from several soil samples with minimum clean-up procedure. The chromatograms obtained demonstrated steady baseline tracings free of interference. Residue data from soil samples were also tabulated.