Synthesis and characterization of some carbazole-based imine polymers

Five imine polymers, all containing 3,6-disubstituted carbazole ring in the main polymer chain, were synthesized by solution polycondensation of 3,6-diformyl (N-hexyl) carbazole with hydrazine, 1,4-diaminobenzene, 4,4′-diaminobiphenyl, 1,5-diaminonaphthalene and 3,6-(N-hexyl) diaminocarbazole. The polymers were analyzed by spectroscopic methods and compared with two imine models.     

Synthesis of block‐graft polymers by anionic polymerizations

Two poly(4‐methylstyrene) (P4MS)‐block‐polystyrene (PS)‐block‐P4MS triblock copolymers were prepared by successive anionic addition of styrene and 4‐methylstyrene monomers as the core backbone ( CB ) for the architecture of block‐graft polymers. Both terminal 4‐methylstyrene blocks of CB were metalated with a sec‐butyllithium (sec‐BuLi)/tetramethylethylenediamine (TMEDA) complex in cyclohexane. The first‐generation block‐graft polymer ( 1BG ) was prepared by anionic polymerization of α‐methylstyrene by the lithiated CB in tetrahydrofuran (THF) at –78°C and subsequently the terminal graft ends were capped with a small amount of 4‐methylstyrene. The characterization of those block‐graft polymers was carried out in detail.     

Synthesis and optical properties of some novel arylene-alkynylene polymers

The synthesis and the optical properties of the novel aryleneethynylenes ( 7 , 8 ) and arylenebutadiynylenes ( 10 , 11 ) using either a Heck-type or a Hay-type coupling are reported. The route reported here also makes meta-linked arylene-alkynylenes accessible. The number-average degree of polymerization of the obtained polymers is between 13 and 60. Some of the materials show promising optical properties (photoluminescence).     

Synthesis and characterization of some new Schiff base polymers

Seven Schiff base polymers poly 5,5^′-methylenebis(2-hydroxyacetophenone)semicarbazone (PHASC), poly-5,5^′-methylenebis(2-hydroxyacetophenone)thiosemicarbazone (PHATS), poly 6,6^′-methylenebis(2-hydroxynaphthaldehyde)1,2-propylenediimine (PHNPn), poly 6,6^′-methylenebis (2-hydroxynaphthaldehyde)1,3-propylenediimine (PHNPR), poly 6,6^′-methylenebis (2-hydroxy-naphthaldehyde)thiosemicarbazone (PHNTS), poly 6,6^′-methylenebis(2-hydroxy-naphthaldehyde)urea (PHNU) and poly-6,6^′-methylenebis(2-hydroxynaphthaldehyde)semicarbazone (PHNSC) were prepared by polycondensation of 5,5^′-methylenebis(2-hydroxyacetophenone) (MHA) or 6,6^′-methylenebis(2-hydroxynaphthaldehyde) (MHN) with semicarbazide, thiosemicarbazide, 1,2-propylenediamine, 1,3-propylenediamine or urea. The polymers were characterized by elemental micro-analysis, infrared and ultraviolet spectroscopy and viscosity measurements. The reduced viscosity of the polymers measured in dimethylformamide (DMF) was observed in the range 0.32-0.63 dl/g.     

Synthesis,characterization, and biological activity of some aza‐uracil derivatives

Thiation of 1 by LR gave the corresponding 3,5‐dithioxo derivative 2 and the trimer 3 . Methylation of 1 afforded the S‐methyl derivative 4 . Compound 1 was fused with 6‐bromo‐2‐phenyl‐benzo[1,3‐d]oxazin‐4‐one ( 5 ) and gave 6 . Condensation of 1 with some acid derivatives 7a , 7b , 7c , 7d and/or 8a , 8b , 8c yielded thiadiazolo‐triazine derivatives 9a , 9b , 9c , 9d and 10a , 10b , 10c . Compounds 9a , 9c and 10c were hydrolyzed to furnish 11a , 11b , 11c Acetylation of 14 afforded mono‐ and diacetyl‐derivatives 15 and 16 . Benzoylation of 14 afforded mono‐ and dibezoyl‐derivatives 17 and 18 . 14 with some aromatic aldehydes yielded 9a , 9b , 9c . Reacting 14 with phenyl (iso‐ and/or isothio‐) cyanate gave the urea derivatives 20a , 20b . Thiation of 14 with P₄S₁₀ furnished 21 . The newly synthesized compounds were tested as antimicrobial agents. J. Heterocyclic Chem., (2011)     

Synthesis and electro-optical properties of some ferroelectric liquid crystalline polymers

The synthesis and characterization of several series of ferroelectric side-chain polymers were presented. Differential scanning calorimetry, optical polarizing microscopy and X-ray diffraction measurement were used to determine their thermal transitions and analyze their anisotropic textures. The influence of polymer backbones, flexible spacers, mesogenic cores as well as chiral end groups on the mesomorphic properties of the polymers was discussed. Furthermore, the dielectric relaxation properties of the obtained polymers were also evaluated.     

Synthesis of uracil derivatives by oxidation of Fischer tungsten-carbene uracil complexes

A study on the oxidation of Fischer tungsten-carbene uracil complexes has been carried out. Several commonly used oxidants gave results strongly influenced by the presence of substituent on nitrogen atoms. In particular, usual oxidants failed in the oxidation of 3-alkyl uracil carbene complexes. Finally, we showed that t-butyl hydroperoxide is able to oxidize successfully also 3-alkyl uracil carbene complexes and can be used as a good alternative to the other methods.     

Synthesis,thermal degradation,and kinetic parameters studies of some coordination polymers

This article describes synthesis and route of thermal degradation and studies of kinetic parameters of some coordination polymers of first transition series metal ions viz. Mn(II), Co(II), Ni(II), Cu(II), and Zn(II). The newly synthesized ligand and its coordination polymers have been characterized by various instrumental techniques. The thermal degradation studies have been studied at different heating rates to determine the apparent activation energy, order of reaction, entropy change, free energy change, apparent entropy change, and frequency factor using Sharp–Wentworth and Freeman–Carroll methods. Thermo gravimetric analysis (TGA) has been used to determine the thermal stability of coordination polymers. The decomposition temperatures of the polymers were defined by half decomposition curve technique.     

Synthesis of the carbocyclic analogs of uracil nucleosides

Treatment of the required hydroxyl derivatives of cis-3-aminocyclopentanemethanol with 3-ethoxyacryloyl isocyanate gave N-(3-ethoxyacryloyl)-N′-[hydroxy- or dihydroxy(hydroxy-methyl)cyclopentyl]ureas. Cyclization of the ureas in dilute sulfuric acid afforded high yields of the carbocyclic analogs of uridine, 2′-deoxyuridine, and 3′-deoxyuridine. The uridine and 3′-deoxyuridine analogs were also obtained in good yields by cyclizing the ureas in concentrated aqueous ammonia. None of the three analogs showed activity in tests versus KB cells in culture or L1210 leukemia in vivo.     

Incorporation of 5-substituted uracil derivatives into nucleic acids—I: Synthesis of some 5-substituted uracils

5-(1-Hydroxyethyl)uracil, prepared by the reduction of 5-acetyluracilwith sodium borohydride, has been dehydrated with formic acid to give 5-vinyluracil and a dimer of 5-vinyluracil. trans 1,3-bis (uracil-5-yl)but-1-ene. These compounds have also been prepared with a tritium label in an identified position and with a high specific activity such that their incorporation into nucleic acids can be monitored.     

Organometallic polymers. XV. Synthesis and characterization of some ferrocene-containing oxysilane polymers from bis(dimethylamino)silanes

Three bis(dimethylamino)silane monomers have been polymerized with 1,1'-bis-(hydroxymethyl)ferrocene to give ferrocene-containing polyoxysilanes I and II. They were bis(dimethylamino)dimethylsilane (III), bis(dimethylamino)diphenylsilane (IV), and 1,4-bis(N,N-dimethylaminodimethylsilyl)benzene (V). Mixing of the diol and III or IV at O°C followed by heating resulted in polymerization to higher molecular weights than when the monomers were initially mixed at higher temperatures. At higher temperatures the formation of monomeric cyclic products seriously competed with polymerization, and the five atom bridged derivative, 3-sila-2,4-dioxa-3,3diphenyl[5]ferrocenophane (VI) was isolated in good yield. The use of silane V, where cyclization is not expected to compete, led to higher polymer yields and molecular weights. The polymers were low melting and I (R = C₆H₅) could be cast into films and weak fibers were drawn from its melt. The polymers were sensitive to hydrolytic decomposition; those containing Si-CH₃ linkages were completely hydrolyzed in refluxing THF-H₂O (10:1) in 1 hr. The polymers were characterized by viscosity studies, gel-permeation chromatography, and infrared and NMR spectroscopy.     

Synthesis and properties of hydrophilic polymers, 6. Water-soluble polypyrrole graft copolymers with electrical conductivity

A novel method for the preparation of water-soluble polypyrrole graft copolymers with polyamines or polyimines is described. The polyreaction is performed in acidic solution by using chemical oxidants, e.g. iron(III) chloride or ammonium peroxodisulfate. The graft copolymers showed electrical semiconductivity in the undoped state which can be placed between the high conductivity of polypyrrole and the nonconductivity of the polyimine. Their thermal stability at 250°C is improved compared to polypyrrole. The novel graft copolymers are soluble in water over a wide pH range and have a good processability.     

Phthalocyanine polymers. II. Synthesis and characterization of some metal phthalocyanine sheet oligomers

Metal phthalocyanine oligomers that possess peripheral carboxylic acid groups were prepared by the reaction of pyromellitic dianhydride, a metal salt, urea, and a catalyst. These materials have blue to purple colors with a metallic luster and are soluble in sulfuric acid, dimethylsulfoxide, dimethylformamide, and dimethylacetamide. Their thermal stability is high in an anaerobic atmosphere with char yields of 80–85% at 800°C. Elemental, spectral, and titrimetric analyses and thermal studies were carried out to characterize them.     

Structural rigidity control in arborescent graft polymers

Successive chloromethylation-anionic grafting sequences on polystyrene have led to well-defined hyperbranched macromolecules. Polymers with branching functionalities f > 5000 and molar masses over 10⁷ g/mol were thus prepared while maintaining a ratio of mass- to number-average molar masses M_w/M_n = 1,1-1,3. Three series of styrene polymers were prepared by varying the density of grafting sites along the chain, resulting in controllable stiffening of the molecular structure. Characterization of the branched molecules by size-exclusion chromatography/low-angle laser light scattering and light scattering confirmed a geometric increase in molar mass for successive generations, and a low ratio of mass- to number-average molar masses. Static and dynamic light scattering experiments showed that the molecules behave like hard spheres in dilute solutions. Measurements in the semidilute range, however, showed a progressive structural stiffening effect as the branching density increases.     

Synthesis of some novel heteroarylene ethynylene polymers containing 1,10-phenanthroline in the polymer backbone

Palladium-catalyzed polycondensation between 3,8-dibromo-1,10-phenanthroline and substituted phenyl-1,4-diacetylenes in the presence of diisopropylamine produced the soluble π-conjugated poly(heteroarylene ethynylene)s 7a and 7b . The polymers were obtained in high yields (86–92%) and had molecular weights of M̄_n = 8700 g · mol⁻¹ ( 7a ; vapor pressure osmometry) and 6900 g · mol⁻¹ ( 7b ; vapor pressure osmometry). The low molecular model compounds 6a and 6b were prepared to analyze the connection between the primary structure and spectroscopic properties. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4442–4448, 1999     

Surface modification of polymers by photoinitiated graft polymerization

Two methods for modification of polymer surfaces by photoinitiated grafting have been developed and applied to films and fibers of synthetic polymers, e.g. polyethylene and polypropylene with acrylic monomers. In the batch process the substrate is enclosed in a cell containing initiator and monomer vapor. UV light through a quartz window initiates the grafting reaction by exciting the initiator (e.g. benzophenone). The grafting reaction is slow (1 to 3 min) due to the inefficient transfer of initiator and monomer through vapor phase. In the continuous process the substrate is presoaked in a solution of initiator and monomer and then drawn into a reactor “on line” where the substrate is irradiated by UV light through a quartz window. The grafting takes place in the very thin surface layer of solution on the substrate. The grafting efficiency is high (70–80% of the polymer formed is grafted) and the process is rapid (5–15 s due to the efficient transfer of initiator and monomer through the liquid phase. The continuous surface grafting process is promising for industrial applications.