Synthesis and properties of poly(arylene ether imide ketone)s

Poly(arylene ether ketone)s containing imide units were prepared by the aromatic nucleophilic displacement reaction of the potassium salts of bisphenols with bis(4-fluorobenzoyl)phthalimides in N-methyl-2-pyrrolidone at elevated temperature. The polymers having inherent viscosities of 0.34–0.77 dL/g were obtained in 2 h. The polymers exhibited glass transition temperatures ranging from 216 to 268°C and decomposition temperatures (5% weight loss under air atmosphere) ranging from 450–570°C mainly depending on the bisphenols used in the polymer synthesis. The isothermal TGA measurements (400°C under air or nitrogen atmosphere) revealed that the 4,4'-biphenol- and hydroquinone-based poly(arylene ether ketone imide)s belong to a superior class of heat resistant polymers. The mechanical properties of these polymers are also described. © 1994 John Wiley & Sons, Inc.     

Green synthesis of polymers containing phosphorus in the main chain

New structures of polymers containing phosphorus in the main chain were prepared by interfacial polycondensation of phenylphosphonic dichloride with 4,4’-(1,3-phenylenediisopropylidene) bisphenol (bisphenol M) using two different methods: method I: gas–liquid interfacial polycondensation without an organic solvent and a catalyst; and method II: solid–liquid interfacial polycondensation using green solvents and without catalyst. The aim of this work was to apply these methodologies as eco-friendly and economical procedures for a green chemistry. The polymers were characterized by gel permeation chromatography (GPC), FT-IR, ¹H and ³¹P-NMR spectroscopy, differential scanning calorimetry (DSC) and thermal analysis. Yields in the range of 88.0–90.0, and inherent viscosities in the range of 2.2–3.2 dl/g were obtained. High molecular weight polymers (57 600–114 400) have been successfully prepared. The polymers are self-extinguishing and begin to lose weight at around 300 °C. The flammability was investigated by measuring limiting oxygen index values (LOI).     

Synthesis of polyphosphonates containing pendant chloromethyl groups by the polyaddition of bis(oxetane)s with phosphonic dichlorides

The polyaddition of 4,4′‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]biphenyl (4,4′‐BEOBP) and phenylphosphonic dichloride (PPDC) with quaternary onium salts as catalysts proceeded under mild reaction conditions to afford a polymer containing phosphorous atoms in its main chain. A polyphosphonate with a high number‐average molecular weight (10,300) was obtained by the reaction of 4,4′‐BEOBP and PPDC in the presence of tetraphenylphosphonium chloride (TPPC) in o‐dichlorobenzene at 130 °C for 24 h. The structure of the resulting polymer was confirmed with IR, ¹H NMR, and ³¹P NMR spectroscopy. Furthermore, it was proved that the polyaddition of certain bis(oxetane)s with phosphonic dichlorides proceeded smoothly to give corresponding polyphosphonates with TPPC as the catalyst. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3835–3846, 2002     

Association of polyacrylonitrile prepared by low-temperature,solution polymerization with an organometallic catalyst

The weight-average molecular weights of polymers of acrylonitrile prepared by a free-radical initiator and an organometallic catalyst have been determined by lightscattering measurements in N,N-dimethylformamide, dimethyl sulfoxide, and dimethylacetamide at 25°C. and in dimethyl sulfoxide at 140°C. The apparent molecular weights of the polymers prepared with the NaAlEt₃S(i-Pr) catalyst in DMF at ?78°C. (referred to as high-melting polymers) changed from 54,800, 82,700, and 480,000 when measured in DMF at 25°C. to 36,000, 41,600, and 225,000 when measured in DMSO at 140°C., whereas the molecular weights of the free-radical polymers remained unchanged. Furthermore, from results obtained in DMSO at 140°C., The intrinsic viscosity–molecular-weight relationships were found to be identical for the high-melting and the free-radical polymer and in substantial agreement with an equation reported by Cleland and Stockmayer. The apparent decrease in molecular weight of the high-melting polymer from 25 to 140°C. indicates rather clearly that the high-melting polymers are associated in DMF at 25°C. The “aggregates,” even though present only at low concentrations, raised the weight-average molecular weight markedly but affected the number-average molecular weight only slightly, thus giving a high M?_w/M?_n ratio. It appears likely that when temperature and solvent are such that association does not occur, linear PAN's will have approximately the same intrinsic viscosity–molecular weight relationship (subject of course to slight change by polydispersity). The often reported abnormal molecular weight of samples prepared by solution polymerization especially at low temperatures, may be attributed to branching, or to an association, as reported here. The nature of association of PAN in dilute solution is also discussed.     

Macromolecular-chain rearrangement during synthesis of poly(N-phenylurethanes)

Poly(N-phenyliminocarbonates) capable of converting into poly(N-phenylurethanes) via thermal treatment at 300°C for 9 h through the Chapman mechanism were prepared via the polycondensation of bisphenols with plenyliminophosgene. The resulting polymers are soluble in chlorinated hydrocarbons and amide solvents. The polymers are characteristic by glass-transition and 10%-weight-loss temperatures during heating in air of 165–210 and 455–490°C, respectively.     

Poly(Ether sulfone)s made from 4,4′-dihydroxystilbene and 4,4′-difluorodiphenylsulfone: Synthesis,crosslinking, and epoxidation with hydrogen peroxide

High molecular weight polymers from trans-4,4′-dihydroxystilbene, bisphenols, and 4,4′-difluorodiphenylsulfone were synthesized by a nucleophilic displacement reaction using DMAc as solvent in the presence of potassium carbonate. Characterization and crosslinking studies of these polymers were carried out by DSC, TGA, TMA, x-ray diffraction, and solution and solid NMR. It was found that all polymers can be crosslinked to some extent on heating to 350°C. We also studied the epoxidation of these polymers with hydrogen peroxide in the presence of methyltrioctylammonium tetrakis (diperoxotungsto) phosphate (3—) as the catalyst in a biphasic system. The epoxidized polymers are thermally cross-linkable. Very efficient crosslinking was obtained by heating the epoxidized polymers at 350°C under nitrogen. © 1995 John Wiley & Sons, Inc.     

Low‐temperature route to thermoplastic polyamide elastomers

Thermoplastic polyamide elastomers were obtained by polymerization of aminobenzoyl‐substituted telechelics derived from poly(tetrahydrofuran)‐diols (number‐average molecular weight: 1400 or 2000 g mol^?1) with several diacid dichlorides (terephthaloyl dichloride, 4,4′‐biphenyldicarbonyl dichloride, or 2,6‐naphthalenedicarbonyl dichloride) and chlorotrimethylsilane in N,N‐dimethylacetamide at 0–20 °C. The as‐prepared polymers had melting temperatures above 190 °C and exhibited elastic properties at room temperature, as evidenced by dynamic mechanical analysis and stress–strain measurements. The polymer with 2,6‐naphthalenedicarboxamide hard segments had the widest rubbery plateau within the series, the highest extension at break, and good recovery properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1449–1460, 2004     

Fluorinated poly(ether sulfone)s

New fluorinated poly(ether sulfone)s were prepared from bisphenols and α,ωbis(4-fluorophenylsulfonyl)perfluoroalkanes. The fluorinated sulfone monomers were synthesized by reaction of 4-fluorobenzenethiol salts with perfluoroalkylene diiodides, followed by oxidation. Sodium carbonate mediated polymerization gave high molecular weight polymers in excellent yield. The polymers are generally soluble in chlorinated hydrocarbons and some dipolar solvents, are amorphous with T_g's in the range of 120–160°C and are stable to 400°C. They form clear, colorless films by solution casting. Cast films have dielectric constants and dissipation factors somewhat below those of typical poly(ether sulfone)s, and show good permeability and selectivity for O₂/N₂ gas separations.     

Synthesis and characterization of new cardo polyesters

New phthalide-containing bisphenols, phenolphthalein-N-(3-methylanilide) (3-PMA), and phenolphthalein-N-(4-methylanilide) (4-PMA), were synthesized from phenolphthalein and m- and p-toluidines. These bisphenols were polycondensed with terephthaloyl chloride (TPC) using an interfacial or solution polymerization technique to yield new polyesters. Copolymers were also obtained by utilizing different molar proportion of phenolphthalein (PPH) and 3-PMA or 4-PMA with TPC. The polymers prepared by solution polymerization were obtained in 93–99% yields and showed reduced viscosities in the range 0.37–0.83 dL/g. They were readily soluble in chlorinated hydrocarbons and aprotic polar solvents. The polyesters showed glass transition temperatures in the range 261–300°C as measured by DSC. Thermogravimetric analysis of the polyesters indicated no weight loss below 408°C under N₂ atmosphere. Structure–property correlations among these cardo polyesters have been discussed. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3227–3234, 1997     

Synthesis and characterization of poly(ether naphthalimide)s

A series of new poly(ether imide)s containing the naphthalimide moiety were prepared from bis(4-fluorobenzoyl)naphthalimides and several bisphenols by aromatic nucleophilic displacement polymerization. These polyimides had inherent viscosities in the range of 0.31–1.04 dL/g in chloroform and glass transition temperatures of 283.0–341.6°C by differential scanning calorimetry. The onset temperature for 5% weight loss for all the polymers was over 448°C, as assessed by thermogravimetry at a heating rate 10°C/min in nitrogen. In addition, these novel polyimides exhibited good solubility in organic solvents including N-methyl-2-pyrrolidone, N,N-dimethylformamide, N,N-dimethylacetamide, 1,1,2,2-tetrachloroethane and chloroform. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3227–3231, 1999     

Preparation and properties of N-phenylated aromatic polyamides from N,N′-diphenyl-p-phenylenediamine and aromatic diacid chlorides

N-Phenylated aromatic polyamides and copolyamides derived from N,N′-diphenyl-p-phenylenediamine, isophthaloyl, and terephthaloyl chloride were prepared by high-temperature solution polycondensation in anisole at 155°C. Factors that influenced the reaction, such as monomer concentration, solvent, temperature, and time, were studied to determine the optimum conditions for the preparation of high molecular weight polymers. Compared with analogous unsubstituted aromatic polyamides, the N-phenylated polymers exhibited better solubility in chlorinated and amide solvents, reduced crystallinity, and lower glass transition temperatures (above 200°C). All polymers except the polyterephthalamide could be solvent-cast, as well as hot-pressed, into transparent flexible films.     

Synthesis and properties of poly(arylene ether phenyl-s-triazine)s

A series of new poly(arylene ether phenyl-s-triazine)s was prepared by the nucleophilic aromatic substitution polymerization of the potassium salt of bisphenols with 2,4-bis (halophenyl)-6-phenyl-s-triazine in N-methyl-2-pyrrolidone at elevated temperature. The polymers with inherent viscosities exceeding 0.5 were obtained after polymerization for 1 h using 2,4-bis(fluorophenyl)-6-phenyl-s-triazine as a monomer. The glass transition temperatures of the resulting polymers ranged from 200 to 260°C depending on the bisphenol used in the polymer synthesis. The poly(arylene ether phenyl-s-triazine)s demonstrated excellent thermal stabilities in excess of 490°C (5% weight loss in air). The isothermal TGA measurements (400°C under air or nitrogen atmosphere) revealed that the 4,4'-biphenol- and hydroquinone-based poly(arylene ether phenyl-s-triazine)s belong to the most superior class of heat resistant polymers, such as polyimide Kapton?. The mechanical properties of these polymers are also described. © 1994 John Wiley & Sons, Inc.     

Preparation and properties of fluorine-containing polyarylates from tetrafluoroisophthaloyl chloride and bisphenols

Fluorine-containing polyarylates having inherent viscosities of 0.2–0.8 dL/g were prepared from tetrafluoroisophthaloyl chloride and various bisphenols by low temperature solution polycondensation in chloroform with triethylamine or by two-phase polycondensation in a dichloromethane-water or nitrobenzene-water system with benzyltriethylammonium chloride as the phase transfer catalyst. These polyarylates were amorphous and were readily soluble in various solvents, including chloroform and N-methyl-2-pyrrolidone. The glass transition temperature of the polymer derived from 2,2-bis(4-hydroxyphenyl) propane was 150°C. These polyarylates started to lose weight around 350°C in an air or nitrogen atmosphere.     

Synthesis and Characterization of Polyesterimides Containing Ether Linkages

Abstract

Three novel dicarboxylic acids, bis-4,4′-[N-4(4′-hydroxycarbonyl phenyleneoxy) phthalimido] diphenyl sulfone, bis-4,4′-[N-4(4′-hydroxycarbonyl phenyleneoxy) phthalimido] diphenyl methane, and bis-4,4′-[N-4(4′-hydroxycarbonyl phenyleneoxy) phthalimido] diphenyl ether, were synthesized, and several polyesterimides were prepared from diacid chlorides and bisphenols by solution polycondensation. The polymers were obtained in 65–88% yield and had inherent viscosities in the 0.18 to 0.64 dL/g range. The polymers were characterized by IR, elemental analysis, x-ray, TGA, DSC, and solubility tests. All the polymers were readily soluble in polar aprotic solvents and had a 10% weight loss temperature above 375°C in nitrogen.     

Synthesis and characterization of new soluble polyesters derived from various cardo bisphenols by solution polycondensation

A series of new polyesters was prepared from terephthaloyl (or isophthaloyl) chloride acid with various cardo bisphenols on solution polycondensation in nitrobenzene using pyridine as hydrogen chloride quencher at 150 °C. These polyesters were produced with inherent viscosities of 0.32–0.49 dL · g⁻¹. Most of these polyesters exhibited excellent solubility in a variety of solvents such as N,N‐dimethylformamide, tetrahydrofuran, tetrachloroethane, dimethyl sulfoxide, N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidinone, m‐cresol, and o‐chlorophenol. The polyesters containing cardo groups including diphenylmethylene, tricyclo[5.2.1.0^2,6]decyl, tert‐butylcyclohexyl, phenylcyclohexyl, and cyclododecyl groups exhibited better solubility than bisphenol A–based polyesters. These polymers showed glass transition temperatures (T_g's) between 185 °C and 243 °C and decomposition temperatures at 10% weight loss ranging from 406 °C to 472 °C in nitrogen. These cardo polyesters exhibited higher T_g's and better solubility than bisphenol A‐based polyesters. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4451–4456, 2000     

Macromolecular transformations of polyphenyl imidates into N-phenyl-substituted polyaramides and poly(N-benzoylamines)

A possibility for the transformation of polyphenyl imidates, obtained by polycondensation of bisphenols with imidoyl chlorides of mono- and dicarboxylic acids, into N-phenyl-substituted aromatic polyamides and poly(N-benzoylamines) has been discovered. Such a rearrangement resulted from heating at 260–340 °C for 13–17 h, whereas in diphenyl ether solution at 240 °C for 10–14 h. The polymers synthesized are soluble in organic solvents and possess high stability against thermooxidative destruction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1223–1227, June, 2008.     

Poly-2-oxazolidones: Preparation and characterization

Poly-2-oxazolidones were synthesized by the 1,3-cycloaddition of bisglycidyl ethers to diisocyanates with the use of N,N-dimethylformamide and lithium chloride as solvent and catalyst, respectively. A variety of arylene and alkylene diisocyanates and coreactant bisepoxides were used in the polymer-forming reaction. The polymers, obtained in high yield, were generally soluble in methylene dichloride, chloroform, N,N-dimethylformamide, and dimethyl sulfoxide. They had intrinsie viscosities up to 0.42 dl/g and could be cast into films. In several cases molecular weights were determined by vapor pressure osmometry. The poly-2-oxazolidone based upon 1,6-hexamethylene diisocyanate and the bisglycidyl ether of isopropylidene diphenol gave the highest molecular weight. Confirmation that the base unit of the polymers contains the 2-oxazolidone ring was obtained by elemental analysis, infrared and NMR spectroscopy. The poly-2-oxazolidones synthesized were found to be amorphous by x-ray diffraction. Thermogravimetric analyses indicated that a majority of the poly-2-oxazolidones were stable in dry air up to 300°C. In a number of cases Tg's were also determined by using differential scanning calorimetry.     

Thermal degradation of deoxybenzoin polymers studied by pyrolysis-gas chromatography/mass spectrometry

The thermal degradation behavior of novel ultra-fire-resistant polymers and copolymers containing deoxybenzoin units in the backbone was studied by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). The polymers were synthesized by the polycondensation of 4,4′-bishydroxydeoxybenzoin (BHDB) with isophthaloyl chloride (to give polyarylates), phenylphosphonic dichloride (to give polyphosphonates), and their mixtures (to give poly(arylate-co-phosphonate) copolymers). The thermal decomposition, under nitrogen conditions, of BHDB-polyarylate was characterized by a simultaneous degradation of both the bisphenolic (deoxybenzoin) and isophthalate sub-units, whereas a three-step decomposition phenomenon was observed for the BHDB-polyphosphonate. BHDB-polymers containing phosphonate groups in the backbone did not show any phosphorus-based volatile decomposition products, whereas the corresponding bisphenol A-based polyphosphonates released volatile decomposition products comprised mainly of phosphorus-containing compounds.     

Synthesis and characterization of aromatic poly(ether sulfone)s containing pendant sodium sulfonate groups

Poly(ether sulfone)s containing pendant sodium sulfonate groups were prepared by the aromatic nucleophilic substitution reaction of 4,4′-dichlorodiphenylsulfone ( 1 ) and sodium 5,5′-sulfonylbis (2-chlorobenzenesulfonate) ( 2 ) with bisphenols ( 3 ) in the presence of potassium carbonate in N,N-dimethylacetamide. A new monomer 2 containing the sodium sulfonate groups was synthesized by the sulfonation of 1 with fuming sulfuric acid. The polycondensation proceeded smoothly at 170°C and produced the desired poly(ether sulfone)s containing the sodium sulfonate with inherent viscosities up to 1.2 dL/g. The polymers were quite soluble in strong acid, dipolar aprotic solvents, m-cresol, and dichloromethane. The thermogravimetry of the polymers showed excellent thermal stability, indicating that 10% weight losses of the polymers were observed in the range above 460°C in nitrogen atmosphere. Both the glass transition temperatures and hydrophilicity of the polymers increased with increasing their concentrations of sodium sulfonate groups. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of N-phenylated aromatic polyureas from dianilino compounds and aromatic diisocyanates

N-phenylated aromatic polyureas were synthesized by the polyaddition of dianilino compounds to aromatic diisocyanates in sym-tetrachloroethane at around 100°C. Factors that influence the reaction, such as monomer concentration, reaction solvent, catalyst, temperature, and time, were studied to optimize the conditions for the preparation of high molecular weight polymers. Compared with the analogous unsubstituted aromatic polyureas, the N-phenylated polyureas were almost amorphous and soluble in a variety of solvents and had low glass transition temperatures. Some of the polymers could be cast into transparent flexible films from chloroform solutions.