Study of the ceric ion behavior on the initiation of butyl acrylate polymerization onto amylose

A study of the Ce(IV) ion consumption during graft polymerization of butyl acrylate with amylose was carried out. The Ce(IV) consumed was ca. 80% and the ratio of Ce(IV) to anhydroglucose units was 1/15. Poly(butyl acrylate) (PBA) chains were isolated from the grafted copolymer by the perchloric acid hydrolysis method. The molecular distribution was obtained by gel permeation chromatography (GPC). The number-average molecular weight (M_n) of the grafted chains was 276,000 and the weight-average molecular weight (M_w) was 1,320,000. The total number of grafted chains (mmol) ranged from 0.4410^?3 to 8.710^?3 (amylose from 0.08 g to 1.23 g). Frequency of grafting ranged from 1042 to 704.     

Graft Copolymerization on to Cellulose Using Binary Mixture of Monomers

The graft copolymerization of acrylonitrile (AN) and ethyl acrylate (EA) comonomers onto cellulose has been carried out using ceric ammonium nitrate (CAN) as an initiator in the presence of nitric acid at 35±0.1°C. The addition of ethyl acrylate as comonomer has shown a significant effect on overall and individual graft copolymerization of acrylonitrile on cellulose. The graft yield (%G_Y) and other grafting parameters viz. true grafting (%G_T), graft conversion (%C_G), cellulose number (Ng) and frequency of grafting (G_F) were evaluated on varying the concentration of comonomers from 6.0–30.0×10^?1 mol dm^?3 and ceric (IV) ions concentration from 2.5–25×10^?3 mol dm^?3 at constant feed composition (f_AN 0.6) and constant concentration of nitric acid (7.5×10^?2 mol dm^?3) in the reaction mixture. The graft yield (%G_Y) and other grafting parameters were optimal at 15×10^?1 mol dm^?3 concentration of comonomers and at 10×10^?3 mol dm^?3 concentration of ceric ammonium nitrate. The graft yield (%G_Y) and composition of grafted chains (F_AN) was optimal at a feed composition (f_AN) of 0.6. The energy of activation (Ea) for graft copolymerization has been found to be 16 kJ mol^?1. The molecular weight (Mw) and molecular weight distribution (Mw/Mn) of grafted chains was determined by GPC and found to be optimum at 15×10^?1 mol dm^?3 concentration of comonomer in the reaction mixture. The composition of grafted chains (F_AN) determined by IR method was used to calculate the reactivity ratios of monomers, which has been found to be 0.62 (r₁) and 1.52 (r₂), respectively for acrylonitrile (AN) and ethyl acrylate (EA) monomers used for graft copolymerization. The energy of activation for decomposition of cellulose and grafted cellulose was determining by using different models based on constant and different rate (β) of heating. Considering experimental observations, the reaction steps for graft copolymerization were proposed.     

Cerium (IV)-2-chloroethanol redox-pair initiated polymerization of acrylamide in aqueous medium

The kinetics of acrylamide polymerization has been investigated by employing cericammoniumnitrate-2-chloroethanol redox pair under nitrogen atmosphere at 30 ± 1°C. The rate of monomer disappearance is directly proportional to the concentration of 2-chloroethanol (1.0 × 10^?2 ? 10.0 × 10^?2 mol. dm^?3) and is inversely proportional to the ceric ion concentration (2.5 × 10^?3 ? 10.0 × 10^?3 mol. dm^?3) but shows square dependence to the concentration of monomer (5.0 × 10^?2 ? 25.0 × 10^?2 mol. dm^?3). The rate of ceric ion disappearance is directly proportional to the initial concentration of ceric ion and 2-chloroethanol but independent of acrylamide concentration. The viscometric average molecular weight (M _v) decreases on increasing the concentration of ceric ion and increases on increasing the concentrations of acrylamide and 2-chloroethanol. A tentative mechanism has been proposed.     

Amylose and amylopectin as reagents for the flow-injection determination of elemental iodine

The complexation reactions of elemental iodine with amylopectin and amylose were studied under flow conditions with spectrophotometric signal detection. It was found that the average hydrodynamic molecular weights of amylose and amylopectin are 260 000 and 430 000, whereas the coefficients of sedimentation are 3.44 × 10^?13 and 7.15 × 10^?13 s, respectively. It was demonstrated that the optimum configuration of a flow system depends on the properties of polymer reagent solutions, their viscosity, and the different effects of clath-rate formation with iodine. It was found that the reaction somewhat accelerated in the presence of iodide ions, and amylose as a reagent exhibited the best properties, when the calibration function was described by a linear regression equation. The throughput capacity of this technique was as high as 220 or 140 samples per hour with the use of amylose or amylopectin, respectively. The technique is suitable for the direct determination of elemental iodine in seawater and salt. The detection limit of iodine with amylose was as low as 40 ng/mL.     

Kinetics of radiation-induced grafting reactions. I. Polyethylene–styrene systems

By means of bromine labeling and ESR, the grafting reactions of styrene onto preirradiated polyethylene have been investigated. Not all the radicals produced by irradiations participate in grafting reactions all together, but they are rendered active bit by bit by the swelling of crystalline parts of polyethylene. The growing rates for polystyryl graft chains at 20°C decrease from 4 monomer units/active site/sec to one-fourth the initial value after 100 min. On the contrary, the average lifetimes increase from <10³ sec to >2.6 × 10³ sec. The number-average molecular weight of graft chains also increases with reaction times and rises to 3.5 × 10⁵ after 90 min at 20°C.     

Graft polymerization kinetics of acrylamide initiated by ceric nitrate–dextran redox systems

The kinetics of the graft polymerization of acrylamide initiated by ceric nitrate—dextran polymeric redox systems was studied primarily at 25°C. Following an initial period of relatively fast reaction, the rate of polymerization is first-order with respect to the concentrations of monomer and dextran and independent of the ceric ion concentration. The equilibrium constant for ceric ion—dextran complexation K is 3.0 ± 1.6 l./mole, the specific rate of dissociation of the complex, k_d, is 3.0 ± 1.2 × 10^?4 sec.^?1, and the ratio of polymerization rate constants, k_p/k_t, is 0.44 ± 0.15. The number-average degree of polymerization is directly proportional to the ratio of the initial concentrations of monomer and ceric ion and increases exponentially with increasing extent of conversion. The initial rapid rate of polymerization is accounted for by the high reactivity of ceric ion with cis-glycol groups on the ends of the dextran chains. The polymerization in the slower period that follows is initiated by the breakdown of coordination complexes of ceric ions with secondary alcohols on the dextran chain and terminated by redox reaction with uncomplexed ceric ions.     

Aqueous polymerization of methyl methacrylate initiated by the redox system Ce(IV)–isopropyl alcohol. Kinetics and molecular weight

Polymerization of methyl methacrylate was carried out in aqueous nitric acid in the temperature range 26–40°C, with the redox initiator system ceric ammonium nitrate–isopropyl alcohol. A short induction period was observed, as well as the attainment of a limiting conversion, and the total ceric ion consumption with reaction time. The reaction orders were 1/2 and 3/2 with respect to the IPA and monomer concentration, respectively, within the range (3–5) × 10^?3M of Ce(IV). But at lower Ce(IV) concentration (≤ 1 × 10^?3M), the order with respect to monomer and Ce(IV) changed to 1 and 1/2, respectively. The rate of ceric ion disappearance was first order with respect to Ce(IV) concentration and (R_Ce)^?1 was proportional to [IPA]^?1. Both the rate of polymerization and the rate of ceric ion consumption increase with rise in temperature. The average-molecular weight can be controlled by variations in IPA, Ce(IV), and monomer concentrations, and in temperature. A kinetic scheme involving oxidation of IPA by Ce(IV) via complex formation, whose decomposition gives rise to a primary radical, initiation, propagation, and termination of the polymeric radicals by bimolecular interaction is proposed. An oxidative termination of primary radicals by Ce(IV) is also included.     

Studies on the kinetics of ceric–thiourea-initiated aqueous polymerization of methyl methacrylate. I. Mechanistic features in moderately acid solution

The kinetics of the aqueous polymerization of methyl methacrylate by a ceric-thiourea initiator system in moderately acid solution (pH 2.15) was studied. The rate of polymerization was proportional to 0.41 power of ceric concentration, 0.32 power of thiourea concentration, and 1.18 power of monomer concentration. The degree of polymerization was smaller than expected from the rate of polymerization. Initiation efficiency was less than one. There was no evidence of any ceric ion termination in the concentration range of 2.50 × 10^?4–2.00 × 10^?3M studied. The results are explained in terms of partial primary radical termination; the principal mode of termination, however, was bimolecular.     

Highly branched acrylamide graft copolymer

Acrylamide graft copolymerization onto poly(3-O-methacryloyl D -glucose) (PMG) as a backbone was performed by the ceric ion method. The number of polyacrylamide (PAM) chains grafted was dependent upon the concentration ratio of the redox catalyst system at constant acid concentration and increased in proportion to the ceric ion concentration. A maximum number of grafts obtained, for example, was 29 onto PMG (DP = 244) under the conditions [Ce⁴⁺]/[PMG] = 1/5, [H⁺] = 1.0 × 10^?2 mole/l. In other words, the graft frequency was 12 per 100 monomer units of PMG. Such a high frequency of the grafts was, however, greatly decreased when the acid concentration was increased. Characteristics of the highly branched structure were revealed by the relationship between intrinsic viscosity and graft frequency, which showed a downward curvature with the increasing graft frequency. Influences of acid and ceric ion concentrations on the copolymerization were kinetically evaluated. The rate of polymerization was found to be first-order with respect to ceric ion and proportional to the square of the reciprocal acid concentration. The result suggests that the graft frequency is dependent upon the rate of polymerization.     

Chain transfer for vinyl monomers polymerized in N-allylstearamide

Apparent transfer constants have been determined for styrene, methyl methacrylate vinyl acetate, and diethyl maleate polymerized in N-allylstearamide at 90°C. Regression coefficients for transfer were: methyl methacrylate, 0.301 × 10^?3; styrene, with no added initiator, 0.582 × 10^?3; styrene, initiated with benzoyl peroxide, 0.830 × 10^?3; vinyl acetate, 62.01 × 10^?3; and diethyl maleate, 2.24 × 10^?3. Rates of polymerization were retarded for both styrene and methyl methacrylate. Vinyl monomer and comonomer disappearance followed an increasing exponential dependence on both initiator and monomer concentration. Although degradative chain transfer probably caused most of the retardation, the cross-termination effect was not eliminated as a contribution factor. Rates for the vinyl acetate copolymerization were somewhat retarded, even though initiator consumption was large because of induced decomposition. The kinetic and transfer data indicated that the reactive monomers added radicals readily, but that rates were lowered by degradative chain transfer. Growing chains were terminated at only moderate rates of transfer. Unreactive monomers added radicals less easily, producing reactive radicals, which transferred rapidly, so that molecular weights were lowered precipitously. Although induced initiator decomposition occurred, rates were still retarded by degradative chain transfer. A simple empirical relation was found between the reciprocal number-average degree of polymerization, 1/X?_n1 and the mole fraction of allylic comonomer entering the copolymer F₂, which permitted estimation of the molecular weight of copolymers of vinyl monomers with allylic comonomers. This equation should be applicable when monomer transfer constants for each homopolymer are known and when osmometric molecular weights of one or two copolymers of low allylic content have been determined.     

CERIC ION INITIATED GRAFTING ON CELLULOSE FROM BINARY MIXTURE OF ACRYLONITRILE AND METHYLACRYLATE

The Ce(IV)-ion induced grafting on cellulose from the binary mixture of acrylonitrile-methylacrylate has been investigated in heterogeneous and acidic conditions at 25 ± 0. 1°C. Various grafting parameters were evaluated as a function of molarity, feed composition, reaction time, and concentration of ceric ion at constant concentration of nitric acid in the feed. The higher fraction of acrylonitrile in the grafted chains than the feed has indicated the synergistic effect of methylacrylate taken in the feed along with acrylonitrile. IR and elemental analysis for nitrogen contents in the synthesized copolymers were used to determine the composition of the grafted copolymers. The reactivity ratios of acrylonitrile and methylacrylate have been determined by the Mayo and Lewis method and are found to be 1.45 and 0.9, respectively. The grafting parameters have shown increasing trends on varying feed composition (f_AN) from 0.25 to 0.80 and varying monomer concentration from 0. 6 to 5 4 mol dm^?3. The number of grafted moles of synthetic polymer (N_g) on cellulose were found to be dependent on molarity, feed composition, and ceric ion concentration. The experimental results have clearly indicated that maximum fraction of the feed was consumed in the formation of grafted copolymer chains in comparison to the homocopolymers and homopolymers. Estimation of ceric ion disappearance as a function of reaction time has clearly suggested that grafting on cellulose is initiated by the reactive sites generated through hydrogen ion abstraction by single electron transfer process.     

Reversible addition–fragmentation chain‐transfer graft polymerization of styrene: Solid phases for organic and peptide synthesis

The γ‐initiated reversible addition–fragmentation chain‐transfer (RAFT)‐agent‐mediated free‐radical graft polymerization of styrene onto a polypropylene solid phase has been performed with cumyl phenyldithioacetate (CPDA). The initial CPDA concentrations range between 1 × 10^?2 and 2 × 10^?3 mol L^?1 with dose rates of 0.18, 0.08, 0.07, 0.05, and 0.03 kGy h^?1. The RAFT graft polymerization is compared with the conventional free‐radical graft polymerization of styrene onto polypropylene. Both processes show two distinct regimes of grafting: (1) the grafting layer regime, in which the surface is not yet totally covered with polymer chains, and (2) a regime in which a second polymer layer is formed. Here, we hypothesize that the surface is totally covered with polymer chains and that new polymer chains are started by polystyrene radicals from already grafted chains. The grafting ratio of the RAFT‐agent‐mediated process is controlled via the initial CPDA concentration. The molecular weight of the polystyrene from the solution (PS_free) shows a linear behavior with conversion and has a low polydispersity index. Furthermore, the loading of the grafted solid phase shows a linear relationship with the molecular weight of PS_free for both regimes. Regime 2 has a higher loading capacity per molecular weight than regime 1. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4180–4192, 2002     

Studies on the kinetics of ceric-thiourea initiated aqueous polymerization of methyl methacrylate—II. Mechanistic features in strongly acid solutions

The kinetics of ceric-thiourea initiated aqueous polymerization of methyl methacrylate in 1 M H₂SO₄ have been studied. Ceric ion and thiourea initially form an 1:1 complex which then reacts with uncomplexed ceric ion to form the initiating thiocarbamido radicals. The termination is predominantly biomolecular below an initial ceric concentration of 0.66 × 10^?2 M (depending upon the rate of initiation). At higher initial ceric concentrations, polymer radicals are terminated overwhelmingly by ceric ions. Substituted thioureas reduce the rate of polymerization according to the order of increasing electron density on the sulphur atom. The overall activation energy of polymerization is 12.1 kcal/mol in the region of bimolecular termination and 10.2 kcal/mol in the region of metal ion termination.     

Aqueous polymerization of acrylamide initiated by cerium (IV)–ethylenediamine tetraacetic acid redox system

Ethylenediamine tetraacetic acid (EDTA) terminated polyacrylamide was obtained by using the EDTA–cerium(IV) ammonium nitrate [Ce(IV)] redox initiator in the aqueous polymerization of acrylamide. The polymerization behaviors as a function of the concentration of Ce(IV), EDTA, and acrylamide as well as temperature were studied. The consumption rate of cerium(IV) depends a first-order reaction on the ceric ion concentration ([Ce(IV)]). The complex formation constant (K) and disproportionation constant (k_d) of Ce(IV)–EDTA chelated complex are 1.67 × 10⁴ and 3.77 × 10^?3, respectively. The rate dependences of polymerization on monomer concentration and EDTA concentration both follow a second-order reaction in the run of initial monomer concentration ([M]_i) equal to 0.2 mol dm^?3. The number average molecular weight increases linearly with the ratio of [M]_i/[Ce(IV)]_i. The mechanism and kinetics for the polymerization was proposed. The kinetic parameters involved were determined. © 1992 John Wiley & Sons, Inc.     

A predictive-kinetic method for the quantitation of amino acids with ninhydrin

The development and evaluation of a predictive-kinetic method for quantifying amino acids based on reactions with ninhydrin are described. Conditions are developed for which reactions are pseudo-first-order in the amino acid. Absorbance vs. time data from the kinetic region of the reaction (1–3 half-lives) are fitted to a first-order model to predict the total absorbance change that would occur if the reaction were monitored to completion. Computed absorbance changes vary linearly with amino acid concentration between 1 × 10^?5 and 5 × 10^?5 mol l^?1. Results are virtually independent of changes in temperature (± 1° C) and ninhydrin concentration (± 3 × 10^?3 mol l^?1).     

Studies on amylose and its derivatives. X. Dilute solution conformation of amylose tripropionate

Some dilute solution parameters have been measured for linear amylose tripropionate samples in ethyl acetate and tetrahydrofuran. Mark-Houwink relations for the molecular weight range 10⁴ to 1.5 × 10⁵ have been established, and the exponents are 0.58 and 0.61 in ethyl acetate and tetrahydrofuran, respectively. This indicates that the coil is only slightly expanded in these solvents. A value of 6.21 was calculated for the characteristic ratio C_∞ leading to a steric parameter of σ = 2.32. The temperature dependence of the unperturbed dimensions (d In C_∞/dT) was found to negative and of the order ?4.05 × 10^?3°K^?1.     

Ion-Molecule reactions in methylamine and dimethylamine and trimethylamine systems

Fourier transform ion cyclotron resonance mass spectrometry has been used to measure the reaction rates for ions derived from methylamine with dimethylamine or trimethylamine. The use of the selective ion ejection technique greatly simplifies the elucidation of the ion-molecule reaction channels. The rate constants for proton transfer from protonated metwlamine, CH₃NH ₃ ⁺ (m/z 32), to dimethylamine and trimethylamine are 16.1 ± 1.6 × 10^?10 and 9.3 ± 0.9 × 10^?10 cm³ molec^?1s^?1, respectively. The rate constants for charge transfer from methylamine molecular ion, CH₃NH ₂ ⁺ (m/z 31), to dimethylamine and trimethylamine are 9.3 ± 1.8 x 10^?10 and 15.0 ± 5 × 10^?10 cm³molec^?1s^?1, respectively.     

Poly(acrylamide) grafts on spherical bead polymers for extremely selective removal of mercuric ions from aqueous solutions

Poly(acrylamide) grafted from solid polymer particles provides a simple solution for extremely selective removal of mercuric ions from aqueous solutions. The grafting of polyacrylamide has been performed, in high yields (164%), by redox initiation from iminoacetic acid groups created on crosslinked spherical beads (210–420 μm) of glycidyl methacrylate/methyl methacrylate/ethylene glycol dimethacrylate terpolymer. In the grafting, homopolymer formation has been reduced greatly (22%) by the treatment of the bead polymer with ceric ammonium nitrate before the addition of acrylamide monomer. The mobility of the graft chains provides nearly homogeneous reaction conditions and rapid mercury binding ability, as for low molecular weight amides [mercury sorption by a 0.105‐g polymer sample from 105 mL of a 7.74 × 10^?4 mol L^?1 (～155 ppm) Hg(II) solution shows first‐order kinetics with respect to the Hg(II) concentration, k = 1.1 × 10^?3 s^?1]. The mercury sorption capacity under nonbuffered conditions is around 3.6 mmol g^?1 (i.e., 720 g of mercury/kg) and mostly occurs with the formation of diamido–mercury linkages, which result in the crosslinking of polyacrylamide brushes outside the spherical beads. The crosslinks can be destroyed by treatment with hot acetic acid, without hydrolysis of the amide groups. This process allows a complete elution of the mercury as mercury acetate, and the overall result is reversible crosslinking of the outer shell by mercuric ions. The material presented is efficient in the removal of mercury at concentrations measured in parts per million, and the mercury sorption is extremely selective over some foreign ions, such as Fe(III), Cd(II), Zn(II), and Pb(II). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3068–3078, 2002     

Vinyl Polymerization Initiated by Ceric Ion–Ethyl Cellosolve Redox System in Aqueous Nitric Acid

Abstract

Polymerizations of methyl methacrylate (MMA) and acrylonitrile (AN) were carried out in aqueous nitric acid at 30°C with the redox initiator system ammonium ceric nitrate-ethyl cellosolve (EC). A short induction period was observed as well as the attainment of a limiting conversion for polymerization reactions. The consumption of ceric ion was first order with respect to Ce(IV) concentration in the concentration range (0.2–0.4) × 10^?2 M, and the points at higher and lower concentrations show deviations from a linear fit. The plots of the inverse of pseudo-first-order rate constant for ceric ion consumption, (k ¹)^?1 vs [EC]^?1, gave straight lines for both the monomer systems with nonzero intercepts supporting complex formation between Ce(IV) and EC. The rate of polymerization increases regularly with [Ce(IV)] up to 0.003 M, yielding an order of 0.41, then falls to 0.0055 M and again shows a rise at 0.00645 M for MMA polymerization. For AN polymerization, R _p shows a steep rise with [Ce(IV)] up to 0.001 M, and beyond this concentration R _p shows a regular increase with [Ce(IV)], yielding an order of 0.48. In the presence of constant [NO^? ₃], MMA and AN polymerizations yield orders of 0.36 and 0.58 for [Ce(IV)] variation, respectively. The rates of polymerization increased with an increase in EC and monomer concentrations: only at a higher concentration of EC (0.5 M) was a steep fall in R _p observed for both monomer systems. The orders with respect to EC and monomer for MMA polymerization were 0.19 and 1.6, respectively. The orders with respect to EC and monomer for AN polymerization were 0.2 and 1.5, respectively. A kinetic scheme involving oxidation of EC by Ce(IV) via complex formation, whose decomposition gives rise to a primary radical, initiation, propagation, and termination of the polymeric radicals by biomolecular interaction is proposed. An oxidative termination of primary radicals by Ce(IV) is also included.     

A Novel Approach to Prepare Zn(II)-loaded Cotton Fibers with Antibacterial Property

This study is focused on investigating the feasibility of using poly(acrylamide-co-N-vinyl-2-pyrrolidone)-grafted cotton fibers for the release of Zn(II) ions under physiological conditions.

The optimum grafting conditions for ceric ammonium nitrate induced graft-copolymerization of acrylamide and N-vinyl-2-pyrrolidone onto cotton fibers was found to include initiator concentration of 35 mM, catalyst HNO₃concentration of 0.35 M and initiation time of 10 min. The Zn(II)-loaded grafted fibers released Zn(II) in the physiological fluid for nearly 72 h with first order diffusion constant 6.0× 10^?4 min^?1. The release was regulated by ion-exchange mechanism and less release was observed in protein solution. The Zn (II)—loaded fibers exhibit fair antibacterial activity.