Preparation and Luminescence Behavior of CaSiO3:Eu3+(Bi3+)

CaSiO3:Eu3 0.08Bi3 0.002 with a monoclinic perovskite structure was synthesized by using sol-gel method, and its luminescence characteristics were investigated. From the excitation spectrum, it can be seen that the main peaks located at238, 396, 415, 437 and 359 nm correspond to the charge-transfer band of Eu3 -O2- , the absorption transitions of 7F0,1→5 L6,7F0→5D3,7F1→5D3 of Eu3 ions, and 3P1→1S0 of Bi3 ions, respectively. When the samples were excited with a light of wavelength 359 or 395 nm, it can be seen from the emission spectrum that the electronic dipole transition located at 609 nm corresponding to 5D0 →7F2 of Eu3 ions was stronger than the magnetic dipole transition located at 587 nm corresponding to 5D0→7F1 of Eu3 ions, which shows that more Eu3 ions were located in nonreversion center lattices. The energy transfer from Bi3 ions to Eu3 ions in the phosphor was also discussed. The results show that Eu3 ions could be well sensitized by Bi3 ions, and the energy-transfer pattern between Bi3 ions and Eu3 ions was resonance energy transfer.     

Preparation and Luminescence Behavior of CaSiO3：Eu^3＋（Bi^3＋）

CaSiO3：Eu0.08^3＋Bi0.002^3＋ with a monoclinic perovskite structure was synthesized by using sol-gel method, and its luminescence characteristics were investigated. From the excitation spectrum, it can be seen that the main peaks located at 238,396,415,437 and 359 nm correspond to the charge-transfer band of Eu^3＋-O^2- , the absorption transitions of ^7F0.1→^3L6, ^7F0→^5D3, ^7F1→^5D3 of Eu^3＋ ions, and ^3P1→^1S0 of Bi^3＋ ions, respectively. When the samples were excited with a light of wavelength 359 or 395 nm, it can be seen from the emission spectrum that the electronic dipole transition located at 609 nm corresponding to ^5D0→^7F2 of Eu^3＋ ions was stronger than the magnetic dipole transition located at 587 nm corresponding to ^5D0→^7F1 of Eu^3＋ ions, which shows that more Eu^3＋ ions were located in nonreversion center lattices. The energy transfer from Bi^3＋ ions to Eu^3＋ ions in the phosphor was also discussed. The results show that Eu^3＋ ions could be well sensitized by ^3＋ions, and the energy-transfer pattern between Bi^3＋ ions and Eu^3＋ ions was resonance energy transfer.     

溶剂热合成纳米球状La2O2S：Eu^3＋荧光粉

Nano-sphere-like Eu^3 activated lanthanum oxysulfide phosphor was first synthesized directly by solvothermal method. The phosphor was characterized by XRD, TEM and PL. Photoluminescence spectra indicate that this phosphor showed three typical transitions of Eu^3 (^5Do→^7F^1,^5D0→^7F2,^5D0→^7F4). In comparison with those prepared by high temperature solid state method, photoluminescence spectrum of Eu^3 (^5D0→^7F2)-doped nano-La2O2S：Eu^3 phosphor became broader. And the reaction mechanism was also mentioned in this paper.     

A Novel White Light Emitting Long-lasting Phosphor

A novel white light emitting long-lasting phosphor Cd1-xDyxSiO3 is reported in this letterThe Dy^3 doped CdSiO3 phosphor emits white light. The phosphorescence can be seen with the naked eye in the dark clearly even after the 254nm UV irradiation have been removed for about 30min. In the emission spectrum of 5% Dy^3 doped CdSiO3 phosphor, there are two emission peaks of Dy^3 , 580nm (^4F9/2→^6H13/2) and 486nm (^4F9/2→^6H15/2), as well as a broad band emission located at about 410nm. All the three emissions form a white light with CIE chromaticity coordinates x=0.3874, y=0.3760 and the color temperature is 4000 K under 254 nm excitation. It indicated that this phosphor is a promising new luminescent material for practice application.     

高藜芦酸邻菲咯啉铽(Ⅲ)配合物的合成、晶体结构及荧光光谱

A terbium(Ⅲ) complex [Tb2(NO3)(DMPA)5(phen) 2] (HDMPA=homoveratric acid, C12H12O4; phen=1,10- phenanthroline), was synthesized and characterized by elemental analysis, IR and TG-DTG. Its crystal structure was determined by single crystal X-ray diffraction method. The complex, C74H71N5O23Tb2, crystallizes in the monoclinic system, space group P21/n. The emission spectrum of complex, there are four main peaks, 489, 545, 584 and 622 nm, respectively, corresponding to 5D4→7F6, 5D4→7F5, 5D4→7F4 and 5D4→7F3 transitions of Tb(Ⅲ). The intensity of 5D4→7F5 is much stronger than others.     

High-temperature High-pressure Hydrothermal Synthesis of Dy3＋-doped YNbO4 Single Crystal and Its Luminescence Properties

Single crystal Dy3＋ doped YNbO4phosphors were prepared via a high-temperature high-pressure hydrothermal procedure. Under excitation at 270 nm, the Dy3＋-doped YNbO4 phosphor shows bright white emission, which is composed of two strong bands at 492 and 576 nm corresponding to the characteristic 4F9/2→6H15/2 and aF9/2→6H13/2 transitions of Dy3＋, respectively. The dominant band was observed at 352 nm, which corresponds to the 6H15/2→6p7/2 transition of Dy3＋. Nearly white light was achieved at 2ex 270, 310 and 388 nm and the CIE（International Commission on Illumination） values were （0.3135, 0.3421）, （0.3088, 0.3380） and （0.3146, 0.3296）, respectively.     

Li3AlB2O6： Synthesis, Crystal Structure, and Its Luminescence Property Compared with LiSrBO3

The synthesis and crystal structure of Li3AlB2O6 with different cell parameters are reported and these cells are transformed each other from the confirmation of crystallographic structural analyses. The absorption spectrum, luminescence and lifetimes of the Li3AlB2O6 and LiSrBO3 solid compounds are measured and the comparisons are made between them. It is shown that the absorption edges are at about 400 nm (or band gap 3.1 eV) and there is one of absorption peaks at about 350 nm for the Li3AlB2O6 and LiSrBO3. The emission band (530 nm) makes a red shift and fluorescence decay time (24.39 ns) of the Li3AlB2O6 becomes smaller compared with the emission band (480 nm) and lifetime (93.16 ns) of the LiSrBO3 at the visible region. The transition energies and oscillator strengths of the clusters (Li3AlB2O6)2 and (LiSrBO3)2 lying at low excited states are calculated by the time-dependent Hartree-Fock method. The obtained results are used to model the photophysical properties and discuss the origin of spectral bands of the Li3AlB2O6 and LiSrBO3.     

Energy Transfer and Green Emitting Properties of Solid Solution PbGd_(1-x)Tb_xB_7O_(13)(x = 0～1)

A series of Tb-doped solid solutions PbGd_(1-x)Tb_xB_7O_(13)(x = 0~1) were synthesized by high-temperature solid state reaction method. The luminescence properties were investigated under UV(274 nm) and near-UV(372 nm) excitation. The emission spectrum by 274 nm exciting reveals a charge-transfer between Gd~(3+) and Tb~(3+) ions. Under near-UV light(372 nm) excitation, PbGd_(1-x)Tb_xB_7O_(13):x Tb~(~(3+)) exhibits intense green emission centered at 543 nm due to the ~5D_4→~7F_5 transition of Tb~(3+) activator. The optimum doping concentrations were found to be x = 0.8 with the quantum efficiency of 35%. One may expect that PbGd_(1-x)Tb_xB_7O_(13) has the potential to be used as a green phosphor activated by near near-UV light.     

ZrO2∶Tb3+纳米晶的离子交换法制备及其发光特性

以强碱性阴离子交换树脂为交换介质,采用离子交换法制备了稀土Tb3+离子掺杂的ZrO2:Tb3+纳米晶.通过XRD,TG-DSC,TEM,HRTEM等手段分析了样品制备过程的物相变化及晶粒形貌,用荧光光度计研究了样品的三维荧光光谱、激发光谱和发射光谱.结果表明:前驱沉淀物经800℃焙烧处理2 h,制备出近方型形貌,颗粒分散性好、尺寸约为40 nm的四方相ZrO2:Tb3+纳米晶.当焙烧温度升高到900℃以上时样品出现了少量单斜晶相,而经800℃焙烧处理的纯Zr02是以四方相和单斜相同时存在.说明稀土Tb3+离子的掺杂对ZrO2基质的四方晶相起到稳定作用.由ZrO2:Tb3+)的等角三维荧光光谱图显示Tb3+在ZrO2基质中的最佳激发波长为290 nm:在290 nm波长光的激发下观察到纳米ZrO2中Tb3+的发射峰位于491,545,582 nm分别对应于Tb3+的5D4→7F6、5D4→7F5、5D4→7F4、5D4→7F4能级跃迁,以491,545nm的发射峰最强,其中经800℃焙烧处理的样品其5D4→7F6跃迁发射与5D4→7F5跃迁发射强度几乎相同,说明该法制备的纳米ZrO2:Tb3+中5D4→7F6跃迁发射增强,使Tb3+发光的蓝色成分增加了.     

Sr3SiO5∶Eu2+荧光粉的微波合成及性能研究

Silicate orange yellow phosphor used in white-light LED was prepared by microwave method. The structure and optical properties of phosphor were studied. Sr₃SiO₅∶Eu²⁺ phosphor synthesized by microwave method is tetragonal structure of Sr₃SiO₅ with uniform particle distribution. Luminescence spectrum is a broad band spectrum peaking at 575 nm. The peak of excitation is at 532 nm and phosphor can be excited by blue LED. The warm white light was obtained combined phosphor and blue LED. The CIE chromaticity coordinates and correlated color temperature of white light is (x=0.394, y=0.341) and 3 239 K respectively.     

Dy3+在Ba3La(BO3)3 中的光致发光

研究了Ba3La(BO3)3 基质中Dy3 的光致发光特性; 探讨了RE3 的电荷半径比(z/r)和Ce3 , Dy3 含量对Dy3 发光强度及发光颜色的影响; 分析了Ba3La(BO3)3 中Ce3 对Dy3 发光的敏化作用; 确定了Dy3 的 4F9/2→6H15/2及4F9/2→6H13/2跃迁发射的浓度猝灭机制均为电偶极-电四极相互作用.     

3-Trifluoromethyl- and 3-difluoromethyl-thalidomides

Syntheses of racemic 3-trifluoromethyl- and 3-difluoromethyl-thalidomide starting from 2-(tert-butyloxycarbonylimino)-3,3,3-trifluoropropionate or -3,3-difluoropropionate as fluorine-containing building blocks are described.     

KMgF3:Ce3+,Tb3+纳米粒子中Ce3+→Tb3+的发光及能量传递

利用微乳液方法,合成了铈、铽共掺杂的氟镁钾纳米粒子,研究了体系中Ce3+→Tb3+的发光特性以及它们之间的相互作用,结果表明KMgF3:Ce3+Tb3+纳米粒子中存在Ce3+→Tb3+的能量传递过程,即Ce3+可以将吸收的能量直接传递给Tb3+离子,使得Tb3+的绿色发光强度大为增加.     

白光LED用荧光材料Ba3 Gd( BO3 )3:Eu3+的发光性能研究

用高温固相反应法制备了稀土离子Eu3+ 掺杂的三元稀土硼酸盐Ba3Gd(BO3)3发光材料, 通过X射线衍射 (XRD) 、荧光光谱和扫描电镜 (SEM) 等测试手段对Ba3Gd(BO3)3:Eu3+ 荧光粉的制备条件、发光性能以及形貌进行了研究. XRD结果表明, 在1000 ℃时可得到Ba3Gd(BO3)3 纯相. 扫描电镜照片显示颗粒基本为球形, 粒径约为200～400 nm. 发光光谱测试表明, Ba3Gd(BO3)3:Eu3+荧光粉在近紫外区(UV) (396 nm)和蓝光区(466 nm)可以被有效地激发, 分别用255和396 nm的紫外光激发样品时, 以Eu3+ 的 5D0-7F2 (611和616 nm) 超灵敏跃迁为主要发射峰. 当Eu3+的掺杂浓度为10%(摩尔分数)时, Ba3Gd(BO3)3:Eu3+ 在611和616 nm处的发光强度最大. 因此, 这种荧光粉是一种可能应用在白光LED上的红色荧光材料.     

Die Perthioborate RbBS3, TIBS3 und TI3B3S10

The Perthioborates RbBS₃, TIBS₃, and Tl₃B₃S₁₀ . RbBS₃ (P2₁/c, a=7.082(2) Å, b=11.863(4) Å, c=5.794(2) Å, β=106.54(2)°) was prepared as colourless, plate-shaped crystals by reaction of stoichiometric amounts of rubidium sulfide, boron, and sulfur at 600°C and subsequent annealing. TlBS₃ (P2₁/c, a=6.874(3) Å, b=11.739(3) Å, c=5.775(2) Å, β=113.08(2)°) which is isotypic with RbBS₃ was synthesized from a sample of the composition Tl₂S · 2 B₂S₃. The glassy product which was obtained after 7 h at 850°C was annealed in a two zone furnace for 400 h at 400→350°C. Yellow crystals of TlBS₃ formed at the warmer side of the furnace. Tl₃B₃S₁₀ (P1 , a=6.828(2) Å, b=7.713(2) Å, c=13.769(5) Å, α=104.32(2)°, β=94.03(3)°, γ=94.69(2)°) was prepared as yellow plates from stoichiometric amounts of thallium sulfide, boron, and sulfur at 850°C and subsequent annealing. All compounds contain tetrahedrally coordinated boron. The crystal structures consist of polymeric anion chains. In the case of RbBS₃ and TlBS₃ nonplanar five-membered B₂S₃ rings are spirocyclically connected via the boron atoms. To obtain the anionic structure of Tl₃B₃S₁₀ every third B₂S₃ ring of the polymeric chains of MBS₃ is to be substituted by a six-membered B(S₂)₂B ring.     

GdF3∶Er3+，Yb3+的合成和上转换发光特性

采用水热法制备了Er3 离子浓度为3%,yb3 离子浓度分别为10%,20%的GdF3:Er3 ,Yb3 .XRD结果表明:合成的样品均为正交结构的GdF3,Cd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品的晶粒尺寸分别为28和26 nm.研究了980 nm红外光激发的上转换发射光谱.结果表明:红光和绿光发射分别来自于Er3 离子的2H11/2,4S3/2→4I15/2和4F9/2→4I15/2跃迁.样品的绿光发射强度较红光发射强.但绿光和红光发射的相对强度比例与Yb3 离子浓度有关.对Gd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品中可能的上转换发光机制进行了讨论.     

Electrochemical oxidation of 3-imidazoline 3-oxides

Cyclic voltammetry was used to study the electrochemical oxidation of substituted 3-imidazoline 3-oxides. It was determined that the oxidation potentials (E _p/2) of the compounds depend on the nature of the substituents in the 1 and 4 positions of the ring. A correlation analysis ofE _p/2 of the the compounds and _I and _R of the substituent constants in the 4 position of the ring was carried out. The obtained results show that oxidation of 3-imidazoline 3-oxides can occur at the nitrone or amine fragment, depending on the nature of the substituent in the 1 position of the ring.Institute of Organic Chemistry, Russian Academy of Sciences, 630090 Novosibirsk. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 11, pp. 2545–2550, November, 1992.     

Photoluminescent Property Effect of Sc3+ on Er3+/y3+/yb3+ Doped Al2O3 Powders

The photoluminescence (PL) property effect of Sc3+ on the Er3+/Y3+/Yb3+ doped Al2O3 powders prepared by sol-gel method has been investigated. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) implied that the distribution of dopants (Er3+ , Y3+ , Yb3+ , Sc3+) was improved effectively with the rise of Sc3+ concentration. The Fourier transform infrared spectra (FTIR) results demonstrated that the ligand around the quenching center -OH and the population of -OH were altered by introducing different amounts of Sc3+ . The PL intensity centered at 1530 nm was increasingly improved with the rise of Sc3+ concentration, as well as the corresponding full widths at the half maximum (FWHM) and lifetime. The optimized PL intensity was 4.7 times higher than that non-Sc3+ doped sample for the Al2O3 powders codoped with 10mol% Sc3+ . This material can be promising candidates for optical fiber amplifier.     

Er^3＋／Yb^3＋：Sr3Y2（BO3）4晶体的光谱和激光性质

采用提拉法生长了双掺Yb3+和Er3+离子浓度分别为18.63%和0.87%(原子分数)的Sr3Y2(BO3)4晶体.利用测量的偏振吸收谱结合Judd-Ofeh理论,拟合得到了该晶体中Er3+离子的偏振和有效J-O参数.测量了Er3+离子4I13/2能级和Yb3+离子2F5/2能级的荧光衰减曲线,并计算了4I13/2能级的荧光量子效率和Yb3+到Er3+的能量传递效率.利用Fuchtbauer-Ladenberg公式计算了Er3+离子4I13/2→4I15/2跃迁的偏振受激发射截面.在平-凹谐振腔中,利用97nm波长光纤耦合准连续半导体激光端面泵浦1.12mm厚的该晶体,当输出镜透过率为1.5%时,获得了最大输出功率为1.3 w和斜率效率为20%的1560 nm附近的激光输出.结果表明,Er3+/Yb3+:Sr3+Y2+(BO3)4晶体是一种优良的1.5～1.6 μm波段激光的增益介质.     

3-Acylaminopyrazole derivatives via a regioselectively N-protected 3-nitropyrazole

A simple procedure for the selective protection of the endocyclic 1-N of 3-aminopyrazoles as tert-butoxycarbamate (Boc) in good yield is described. A 3-nitropyrazole derivative represents the key intermediate with the nitro substituent determining the regiochemistry of the obtained protected compound. Subsequent acylation at the exocyclic amino group gave rise, after Boc removal, to a series of 3-acylaminopyrazoles in high yields and purities.