高温超导磁悬浮列车视景仿真系统

文中介绍研究开发的高温超导磁悬浮车的视景仿真系统.首先研究了视景仿真的体系结构,接着用3DMAX构建了视景仿真的三维场景,然后根据高温超导磁悬浮车的运行特性建立仿真所用的simulin模型,最后用过Visual C++编制用户界面.演示结果表明,该系统能较好地展示了世界上首辆载人高温超导磁悬浮车及其在轨道上的运行情况和...     

YBCO堆叠高温超导磁体的磁悬浮振动传递特性实验研究

在YBCO堆叠磁体与永磁轨道构成的高温超导磁悬浮系统中,永磁轨道的振动通过电磁作用传递给YBCO堆叠磁体.本文通过实验研究了振动在YBCO堆叠磁体磁悬浮系统中的传递效率与基振加速度幅值和基振频率的关系.研究表明:在YBCO堆叠磁体磁悬浮系统中,YBCO堆叠磁体自由振动频率在9 Hz左右;一定低频条件下,振动的传递效率与基振加速度幅值呈正相关趋势,与基振频率呈负相关趋势.     

永磁体尺寸对高温超导磁悬浮力的影响分析

高温超导体的发展推动了磁悬浮技术的应用,而磁悬浮中磁悬浮力的控制尤为重要。在磁浮系统中永磁体用来给超导体提供磁场,因此磁悬浮力的大小与永磁体的尺寸密切相关。主要介绍磁悬浮力理论计算方法和有限元仿真模型,研究了磁悬浮力随永磁体尺寸变化的趋势,并对仿真结果进行分析同时加以实验佐证。仿真结果对高温超导块材在磁悬浮技术中的应用有参考价值,同时有助于优化材料用量。     

不同重叠排列方式的双层高温超导块材在永磁轨道上方的悬浮特性

研究了永磁轨道上方双层高温超导块材两种不同堆叠方式(籽晶生长线对齐方式和籽晶生长线错开方式)的悬浮特性。实验发现:这两种不同的堆叠方式对悬浮性能有不同的影响。随着场冷高度的增加,它们对悬浮性能的增加效应越来越弱,这种现象对于悬浮力来说尤其明显。场冷高度为10 mm和15 mm时,对悬浮力来说,籽晶生长线对齐堆叠方式与错开方式相比,第一次测量时前者减少的百分比为11.588%和0.870%,第二次测量时为12.693%和1.363%,第三次测量时为12.399%和1.370%。导向力也有类似的结论。经实验可以看出,可以通过优化每一块高温超导块材的具体摆放位置,来提高高温超导磁悬浮车的承载能力和稳定性。同时,这一结果对高温超导磁悬浮轴承、飞轮储能等悬浮间距小的场所也具有一定的参考价值。     

外加磁场强度对高温超导磁悬浮力影响的分析

高温超导磁悬浮力的分析计算是超导磁悬浮技术实用化的一个重要课题。介绍了超导磁悬浮的基本原理。分析了外加磁场强度对磁悬浮力的影响,计算了存在外施磁场下的悬浮力,并设计实验测量相应悬浮力的大小。基于ANSYS软件对两种磁悬浮模型仿真分析,研究了不同模型和参数下的磁力线分布。仿真和实验结果对超导磁悬浮技术的应用具有参考价值。     

多脉冲磁场下含热开关高温超导环的励磁研究

针对堆叠式高温超导磁体的持续电流模式运行,提出一种由多脉冲磁场和热开关组合的励磁方法。在77 K温度下对高温超导环进行了系统的励磁实验研究,并采用有限元方法建立模型对高温超导环中的电流及产生的磁场进行了仿真。励磁结束后高温超导环产生的磁场稳定,磁场大小与多脉冲磁场幅值呈正相关。结果表明,该励磁方法可行,有望应用于堆叠式高温超导磁体的持续电流模式运行。     

基于有限元数值模拟永磁轨道上方高温超导块材悬浮力

采用有有限元计算方法和有限差分法对高温超导块材电磁场进行模拟,计算了永磁轨道上方超导块材所受到的磁悬浮力.文中给出了一种基于有限元的3D-模型数值计算方法；模型采用了电磁场磁矢量法(H-方法)；模型中采用Kim模型来描述高温超导块材的临界电流密度Jc；采用E-J幂指数来描述超导块材的本构关系.该计算模型采用Fortra...     

超导磁悬浮力的理论研究与实验分析

本文通过理论研究和实验分析了超导磁悬浮力的变化规律.首先,基于超导体局部模型,从理论上建立了永磁-超导系统磁悬浮力的计算方法,得到的悬浮力为实用高温超导体的最大磁悬浮力,为判断超导块材的性能提供理论依据.利用该方法全面分析了系统参数对磁悬浮力的影响,结果与实验结果吻合,为超导磁悬浮系统的优化设计提供重要的理论指导.其次,采用基于超导体临界态Bean模型的有限元法仿真分析了超导块材磁悬浮力变化的规律.最后,在西北有色金属研究院的超导磁悬浮力测试台上对超导块材在不同场冷条件下的磁悬浮力变化进行了测试,对仿真结果进行了验证,并得到不同冷却方式、不同的场冷高度对超导磁悬浮力的影响.这些结论为超导块材的实际应用提供了重要的理论依据.     

永磁导轨磁场的三维有限元计算及纵向磁场不均匀性分析

在高温超导磁悬浮车永磁轨道中,由于轨道的连接处存在缝隙,将影响永磁轨道纵向磁场的分布。文中用CEDRAT公司的Flux3D电磁计算软件,建立了高温超导磁悬浮车导轨磁场的三维计算模型。该模型的计算结果与实验结果一致性较好。用该模型计算并分析了分段导轨连接处无缝隙和具有1mm、2mm和5mm缝隙时的导轨磁场;并分析了纵向磁场的不连续性。     

时变外磁场中高温超导块材导向力性能的数值模拟

基于Bean临界态模型,针对目前的高温超导磁悬浮车系统,提出了一种模拟计算方法,该方法可计算在时变外磁场中块材导向力的衰减变化情况。通过对时变外磁场中块材温度、俘获磁通以及导向力等参数变化情况的实验结果和计算结果的对比,证实了该模拟计算方法的有效性。该模拟计算方法可用于定性研究高温超导块材的导向力性能在时变外磁场作用下的变化情况,为高温超导磁悬浮车的研究和工程实践提供了较为重要的科学依据。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.