等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

A study of the mechanism of adsorption of ethyl cellulose on silver powder

The mechanism of adsorption and desorption of ethyl cellulose (EC) on and from silver powder was studied. After analysis with DSC, XPS and dynamic FT-IR, which could be heated by a program-controlled heater, applied to observe the states of pure EC and of EC adsorbed on silver powder, and also the thermal decomposition of EC from silver powder, the chemisorption bonding bridge between the oxygen atoms of EC and the silver atoms investigated. The differences in thermal decomposition between pure EC and EC adsorbed in silver powder were also studied. It was concluded that the chemisorption bonding between the oxygen atoms of EC and the silver atoms mainly involved the lone-pair electrons of the oxygen atoms on the EC chain and the outer empty 5 sp³ hybrid orbital of the silver. Because of the formation of this bridge, the bonds between neighboring carbon and oxygen atoms are weakened. As a result of this effect, the C-O bonds in the EC chain are broken more easily than the C-H bonds, which leads to the observation of -C-H- fragments in the upper space when EC adsorbed on silver is heated. When the same experiments were carried out on pure EC, almost all kinds of broken fragments of the EC molecule, including -C-H-, -C=O- and -C-O- appeared simultaneously.     

Elongation of phenoxide C-O bonds due to formation of multifold hydrogen bonds: statistical, experimental, and theoretical studies

Statistical studies using the Cambridge Structural Database have revealed that there are several elongated phenoxide C-O bonds. They are characterized by the formation of 3-fold (or occasionally 2-fold) hydrogen bonds to the phenoxide oxygen atoms, and their mean bond length extends up to 1.320 ?, which is quite different from the theoretically predicted carbon-oxygen bond length of C(6)H(5)O(-) (1.26 ?). Elongated phenoxide C-O bonds associated with the formation of 3-fold hydrogen bonds were also observed in the X-ray structures of proton-transfer complexes (2X-O(-))(TEAH(+))s derived from 5'-X-substituted 5,5'-dimethyl-1,1':3',1'-terphenyl-2,2',2'-triols (2X-OHs, where X = NO(2), CN, COOCH(3), Cl, F, H, and CH(3)) and triethylamine (TEA). By comparing the X-ray structures, C-O bond elongation was found to be only slightly affected by an electron-withdrawing substituent at the para position (X). This along with strong bathochromic shifts of N-H(···O(-)) and O-H(···O(-)) stretching vibrations in the IR spectra indicates that the elongated C-O bonds in (2X-O(-))(TEAH(+))s essentially have single-bond character. This is further confirmed by molecular orbital calculations on a model complex, showing that the negatively charged phenoxide oxygen atom is no longer conjugated to the central benzene ring, and the NICS values of the three benzene rings are virtually identical. However, C-O bond elongation in (2X-O(-))(TEAH(+))s was considerably influenced by a change in the hydrogen-bond geometry. This also suggests that hydrogen bonds significantly affect phenoxide C-O bond elongation.     

木质素模化物键离解能的理论研究

采用密度泛函理论B3P86方法,在6-31G(d,p)基组水平上,对木质素结构中的6种连接方式(β-O-4、α-O-4、4-O-5、β-1、α-1、5-5)的63个木质素模化物的醚键(C-O)和C-C键的键离解能E_B进行了理论计算研究。分析了不同取代基对键离解能的影响以及键长与键离解能的相关性。计算结果表明,C-O键的键离解能通常比C-C键的小,在各种醚键中C_α-O键的平均键离解能最小,为182.7 kJ/mol;其次是β-O-4连接中的C_β-O键,苯环和烷烃基上的取代基对醚键的键离解能有较强的弱化作用,C-O键的键长和键离解能的相关性较差。与C-O键相比,C-C键的键离解能受苯环上取代基的影响很小,而烷烃基上的取代基对C-C键的键离解能有较大的影响,C-C键的键离解能和键长之间存在较强的线性关系,C-C键的键长越长,其键离解能越小。     

Preparation,characterisation and gas transport properties of trifluoroacetylated ethyl cellulose

A mixed ester of ethyl cellulose (EC) has been prepared by reaction of trifluoroacetic anhydride with the residual hydroxy groups of ethyl cellulose. The mixed ester is soluble in tetrahydrofuran, dichloromethane, chloroform, benzene and pyridine. FTIR and NMR spectra show that hydroxy groups of ethyl cellulose were replaced by trifluoroacetoxy groups. The trifluoroacetyl ethyl cellulose (TFAEC) has higher selectivity for oxygen relative to nitrogen, in gas transport, than unmodified EC. Annealing at an elevated temperature further improves selectivity for oxygen, whilst subsequent ageing at ambient temperature partially reduces oxygen selectivity. The tensile strength of TFAEC is virtually the same as that of unmodified EC, but the elongation to break is 200% higher than for EC.     

A stereocontrolled synthesis of (+)-saxitoxin

A concise stereoselective total synthesis of (+)-saxitoxin is described. A silver(I)-initiated hydroamination cascade constructs the bicyclic guanidinium ion core from a alkynyl bisguanidine. This sequence creates two C-N bonds, one C-O bond, and three rings and forms a single stereoisomer in a single synthetic transformation. This process enabled us to complete the synthesis of (+)-saxitoxin in 14 steps from N-Boc-l-serine methyl ester.     

Roles of radical characters of pristine and nitrogen-substituted hydrographene in dioxygen bindings

We investigate by means of density functional theory (DFT) calculations how hydrogen-terminated graphenes (hydrographenes) with and without nitrogen impurities interact with dioxygen. The current study aims at searching whether hydrographenes can be utilized as cathode catalysts in fuel cell with a focus on dioxygen binding, the first step in oxygen reduction reaction (ORR). If hydrographenes have a nanometer-size rhombic structure with zigzag edges, unpaired electrons are localized at their edges with or without the nitrogen impurities. Spin localization comes from frontier orbitals of the nanometer-size hydrographenes whose amplitudes appear only at their edges. Due to their radical characters, dioxygen can bind to an edge carbon atom of the hydrographenes under the condition where fuel cell is usually operated. There are two types of dioxygen binding into a hydrographene: one is a Pauling fashion where one C-O bond is formed and the other is a bridging fashion with two formed C-O bonds. In the bridging fashion, the formation of the two C-O bonds activates dioxygen, and then radical characters of the oxygen atoms completely disappear. In contrast, the Pauling fashions retain an unpaired electron on the oxygen atom that does not participate to the C-O bond formation. The existence of radical oxygen atoms would facilitate the next step in ORR (the initial proton transfer to an adsorbed dioxygen), whereas such facilitative effects cannot be seen in its absence. According to DFT calculations, the Pauling-type bindings are always energetically preferred over the bridging-type bindings. In particular, the C→N substitution enhances the preferences of the Pauling-type binding over the bridging-type binding compared with the pristine case. Accordingly DFT calculations demonstrate that radical characters of edge carbons of a nanometer-sized rhombic hydrographene play a crucial role in dioxygen bindings in a Pauling fashion that would be responsible for enhancing the catalytic activity in fuel cell.     

Fabrication and characterization of a biocompatible hybrid film based on silver nanoparticle/ethyl cellulose polymer

Cellulose - This work deals with a green route to fabricate a biocompatible hybrid film composed of silver nanoparticles (AgNPs) and ethyl cellulose (EC). The hybrid film (AgNP/EC), with a...     

Implications of protonation and substituent effects for C-O and O-P bond cleavage in phosphate monoesters

A recent study of phosphate monoesters that broke down exclusively through C-O bond cleavage and whose reactivity was unaffected by protonation of the nonbridging oxygens (Byczynski et al. J. Am. Chem. Soc. 2003, 125, 12541) raised several questions about the reactivity of phosphate monoesters, R-O-P(i). Potential catalytic strategies, particularly with regard to selectively promoting C-O or O-P bond cleavage, were investigated computationally through simple alkyl and aryl phosphate monoesters. Both C-O and O-P bonds lengthened upon protonating the bridging oxygen, R-O(H(+))-P(i), and heterolytic bond dissociation energies, DeltaH(C)(-)(O) and DeltaH(O)(-)(P), decreased. Which bond will break depends on the protonation state of the phosphoryl moiety, P(i), and the identity of the organosubstituent, R. Protonating the bridging oxygen when the nonbridging oxygens were already protonated favored C-O cleavage, while protonating the bridging oxygen of the dianion form, R-O-PO(3)(2)(-), favored O-P cleavage. Alkyl R groups capable of forming stable cations were more prone to C-O bond cleavage, with tBu > iPr > F(2)iPr > Me. The lack of effect on the C-O cleavage rate from protonating nonbridging oxygens could arise from two precisely offsetting effects: Protonating nonbridging oxygens lengthens the C-O bond, making it more reactive, but also decreases the bridging oxygen proton affinity, making it less likely to be protonated and, therefore, less reactive. The lack of effect could also arise without bridging oxygen protonation if the ratio of rate constants with different protonation states precisely matched the ratio of acidity constants, K(a). Calculations used hybrid density functional theory (B3PW91/6-31++G) methods with a conductor-like polarizable continuum model (CPCM) of solvation. Calculations on Me-phosphate using MP2/aug-cc-pVDZ and PBE0/aug-cc-pVDZ levels of theory, and variations on the solvation model, confirmed the reproducibility with different computational models.     

Electronic effects in (salen)Mn-based epoxidation catalysts

Presented are density functional calculations on various Mn(salen) systems that are active catalysts in the epoxidation of olefins. Correlation of various structural properties such as Mn=O bond strengths, atomic charges, and C-O distances of evolving bonds in transition state geometries with modified Hammett constants reveal a mechanistic picture of the epoxidation reaction, supporting previous experimental results. Enantioselectivity is tied to the position of a transition state along the reaction coordinate for the first C-O bond formation step, when an olefin is approaching the epoxidation catalyst. Electronic effects exhibited by the 5,5' substituents of the salen ligand manifest themselves in a tuning of the Mn=O bond strength, which in turn influences the C-O distance of the forming bond in the transition state geometry.     

C-C, C-O and C-N bond formation via rhodium(III)-catalyzed oxidative C-H activation

Rhodium(III)-catalyzed direct functionalization of C-H bonds under oxidative conditions leading to C-C, C-N, and C-O bond formation is reviewed. Various arene substrates bearing nitrogen and oxygen directing groups are covered in their coupling with unsaturated partners such as alkenes and alkynes. The facile construction of C-E (E = C, N, S, or O) bonds makes Rh(III) catalysis an attractive step-economic approach to value-added molecules from readily available starting materials. Comparisons and contrasts between rhodium(III) and palladium(II)-catalyzed oxidative coupling are made. The remarkable diversity of structures accessible is demonstrated with various recent examples, with a proposed mechanism for each transformation being briefly summarized (critical review, 138 references).