CLBO晶体用于三次谐波转换的特性研究

 讨论了CLBO晶体用于高效率三倍频的机理,从理论上分析了产生高次谐波转换的基本特性,对CLBO晶体在高功率激光装置中产生高效率谐波转换的基本参数进行了数值模拟计算,并与KDP晶体三次谐波转换的特性进行了比较,给出了CLBO 晶体产生高效率谐波转换的基本条件。     

CLBO晶体用于三次谐波转换的特性研究

讨论了CLBO晶体用于高效率三倍频的机理,从理论上分析了产生高次谐波转换的基本特性,对CLBO晶体在高功率激光装置中产生高效率谐波转换的基本参数进行了数值模拟计算,并与KDP晶体三次谐波转换的特性进行了比较,给出了CLBO 晶体产生高效率谐波转换的基本条件。     

双色反向旋转圆偏振激光场下氩原子高次谐波的产生

通过二阶分裂算符法数值求解了二维含时薛定谔方程,研究了双色反向旋转圆偏振激光场作用下氩原子的高次谐波的产生.研究表明,双色反向旋转圆偏振激光场的幅值比对高次谐波发射的效率有较大影响,当幅值比为1.4时高次谐波的发射效率最高,并应用时频分析方法、经典三步模型以及利萨茹图形等解释了高次谐波发射的物理机制.研究了不同幅值比情况下谐波场的旋转偏振特性,发现对不同频段的谐波谱的电场进行叠加,谐波场的偏振特性随幅值比的不同而发生变化,但谐波场的旋向性与入射激光脉冲的旋向性相同,不受幅值比变化的影响.     

超谐波声场及其生物组织成像的理论及实验研究

理论及实验研究了平面活塞换能器激发的超谐波(三次、四次及五次谐波的线性幅度叠加)的轴向和径向声场特性,讨论了声源强度及传播距离对超谐波的强度及指向性的影响。结果表明在合适的声源强度及传播距离条件下,超谐波的幅度可大于二次谐波,同时-3dB波束宽度变窄,为基波和二次谐波的59%和77%。对生物组织进行了超谐波成像,并与基波、二次谐波图像对比。结果表明超谐波可提高超声非线性成像的灵敏度及分辨率。     

EAST��ص�Դ���г������

针对EAST超导托卡马克核聚变实验装置中等离子体位移快速控制的要求,快控电源采用三电平电路结合载波移相PWM调制技术,实现多组逆变器并联运行。介绍了系统设计方案,并对其输出谐波进行了研究,利用双重傅里叶变换建立了数学模型,分析了其谐波分布特性。通过仿真和实验表明,快控电源系统具有良好的谐波特性,具备良好的大电流输出和快速响应能力。     

双稳态结构中的1/2次谐波共振及其对隔振特性的影响

以典型的双稳态系统——屈曲梁结构为例,基于等效模型,结合解析、数值和实验手段,研究了双稳态结构中的1/2次谐波共振特性、演化过程、参数调节规律及其对隔振特性的影响.研究发现,当非线性刚度系数或激励幅值增加到一定程度时,系统会在一定带宽下产生显著的1/2次谐波共振;随着激励幅值增加,阻尼系统的1/2次谐波遵循“产生-增强-衰退-消失”的过程,该过程对峰值频率和峰值传递率有重要影响;适当提高非线性强度能有效改善双稳态结构隔振特性.针对双稳态屈曲梁结构开展的实验验证了1/2次谐波特性和隔振特性变化规律.     

周期信号傅里叶分析一种实验观测方法

介绍了用两只动圈扬声器组成谐波装置，用于对周期信号进行傅里叶分析。讨论了谐波共振时振幅的特性。     

强场高次谐波时间特性的理论分析

通过用单电子近似求解含时薛定谔方程,用加窗傅里叶分析的方法,分析了单原子产生的高次谐波的时间特性。理论分析表明,基态粒子数消耗对不同级次谐波辐射的影响程度不一样;谐波辐射随着入射激光场强度的增加会出现饱和;随着谐波级次的增加,波辐射越来越趋向于集中在更短的时间间隔内,相应的线宽胡着谐波级次的增加而增加。     

三次谐波系统在混沌状态下光场的统计特性

数值分析了三次谐波系统在混沌状态下光场的统计特性。三次谐波混沌状态下光场统计服从超泊松分布,谐波光场涨落皆大于基波光场涨落,这种光场涨落随系统最大李亚普诺夫指数增大而无规律地发生起伏变化。     

飞秒强激光脉冲驱动Ne高次谐波蓝移产生相干可调谐极紫外光实验研究

本文对不同气压以及入射激光强度下Ne相位匹配高次谐波的光谱蓝移特性进行了实验研究.利用气体盒装置,在谐波平台区域获得最大谐波蓝移为0.13 nm,在谐波截止区获得的最大蓝移为0.07 nm.实验结果表明,通过调节气体盒内气压以及入射激光强度,即改变气体盒中自由电子密度,有利于实现高次谐波光谱蓝移.     

高功率微波辐射场功率阵列测量装置研制

基于高功率微波辐射场分布积分方法,通过衰减、延迟、合路等技术手段,研制了一套高功率微波辐射场功率阵列测量实验装置。该装置仅利用一台示波器就可以同时测得16个不同点处的高功率微波辐射场波形,由此得到不同点处的功率密度,在辐射天线方向图旋转对称的条件下,利用编写的程序可以迅速求得单次、短脉冲高功率微波源的空间辐射功率,并在X波段相对论返波管高功率微波源功率测试中得到应用,为高功率微波功率测量特别是单次HPM功率测量,提供了一种新的功率测量阵列装置。     

压缩产生等离子体强光源辐射功率计算方法

强光辐射技术是一项技术复杂、特点突出的高新尖端技术,在红外对抗中有着重要的应用。在爆炸激励等离子体产生强光辐射时,发光工质材料及其初始参数的选择成为一项关键技术,他们对辐射功率有着重要的影响。介绍了爆炸激励等离子体产生强光辐射功率的计算方法,用这种计算方法对各种发光工质的辐射功率进行计算,选择出了一种合适的发光工质的材料。分析了在产生强光辐射过程中发光工质的材料、初始参数对辐射功率的影响。推导出辐射功率与这些参数的函数关系,绘制了相应的关系曲线,通过特性曲线分析选择出适宜的初始参数。     

高功率微波辐射场功率阵列测量装置研制

基于高功率微波辐射场分布积分方法,通过衰减、延迟、合路等技术手段,研制了一套高功率微波辐射场功率阵列测量实验装置。该装置仅利用一台示波器就可以同时测得16个不同点处的高功率微波辐射场波形,由此得到不同点处的功率密度,在辐射天线方向图旋转对称的条件下,利用编写的程序可以迅速求得单次、短脉冲高功率微波源的空间辐射功率,并在X波段相对论返波管高功率微波源功率测试中得到应用,为高功率微波功率测量特别是单次HPM功率测量,提供了一种新的功率测量阵列装置。     

基于Nd∶YAG/Cr∶YAG复合晶体的全固态紫外激光器

被动调Q产生1064 nm脉冲激光在腔外聚焦后入射到KTP中,产生532 nm的倍频光,再通过LBO和频产生355 nm激光。当抽运功率为3.4 W时,基频光调Q输出平均功率为350 mW,峰值功率达3.5 kW。腔外二倍频532 nm绿光输出平均功率为110 mW,用Ⅰ类相位匹配LBO晶体和频获得36 mW的355 nm的紫外激光输出,三倍频效率(1064~355 nm)达到10.2%。由于Cr∶YAG晶体达到饱和吸收后,会呈现出各向异性的特征,对基频光的偏振状态有很大影响。实验中必须合理放置复合晶体,使基频光的偏振状态为近似线偏振以提高转换效率。     

Effects of drive current rise-time and initial load density distribution on Z-pinch characteristics

A two-dimensional, three-temperature radiation magneto-hydrodynamics model is applied to the investigation of evolutional trends in x-ray radiation power, energy, peak plasma temperature and density as functions of drive current rise-time and initial load density distribution by using the typical experimental parameters of tungsten wire-array Z-pinch on the Qiangguang-I generator. The numerical results show that as the drive current rise-time is shortened, x-ray radiation peak power, energy, peak plasma density and peak ion temperature increase approximately linearly, but among them the x-ray radiation peak power increases more quickly. As the initial plasma density distribution in the radial direction becomes gradually flattened, the peak radiation power and the peak ion-temperature almost exponentially increase, while the radiation energy and the peak plasma density change only a little. The main effect of shortening drive current rise-time is to enhance compression of plasma, and the effect of flattening initial load density distribution in the radial direction is to raise the plasma temperature. Both of the approaches elevate the x-ray peak radiation power.     

Synchrotron radiation of charges distributed in space

We investigate characteristics of spontaneous radiation of a uniformly charged rod orthogonal to a given plane and moving such that is projection on this plane moves uniformly on a circle. It is shown that the power of radiation of such charged structure is smaller than the power of radiation of point charge of the same value and moving on the same circle. With increasing energy, the power of radiation increases slower than the power of synchrotron radiation.Institute of High Current Electrotechniques, Siberian Branch, Russian Academy of Sciences. Tomsk State University. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 1, pp. 23–25, January, 1993.     

100 μm FEL受激辐射光学诊断

 给出了基于L波段射频直线加速器运行的100 μm FEL自发辐射与受激辐射实验的光学诊断结果,简要介绍了100 μm FEL的光腔准直系统。针对100 μm FEL实验研究的基本要求,对辐射信号的波长光谱、功率能量和脉冲结构等主要参数进行了测量诊断。利用远红外光栅谱仪和锗掺镓光电探测器组成的测量系统,对辐射光的宏脉冲信号进行分光,测量得到了辐射光信号的波长光谱和宏脉冲波形,测得受激辐射中心波长约为115 μm;利用标定过的锗掺镓探测器对辐射信号的功率能量进行了测量,测得单个宏脉冲的功率约为mW量级,能量为nJ量级。     

Reduction of sound radiation by using force radiation modes

The location of a vibration source within a machine is sometimes found to have a significant effect upon its radiated acoustic power. It is known that a simple reduction of vibration cannot always reduce the radiated acoustic power, so that treatments based on analysis of a structure’s vibration modes are not always effective. At the same time, radiation mode analysis is known to be a powerful tool for interpreting sound radiation since those modes are independent of a structure’s surface vibration. However, knowledge of the radiation modes alone cannot be used directly to understand the relationship between vibration source location and acoustic power radiation. In this paper, it is shown that the radiation mode concept can be extended to understand the relationship between acoustic power and driving force distribution by considering the product of the structure’s mobility matrix and the radiation modes: the resulting functions are here defined to be force radiation modes (f_rad-modes). An example is presented in which the acoustic power radiated by a simply-supported, baffled beam is reduced by using guidance provided by the structure’s force radiation modes. The results demonstrate that the force radiation modes can be used to guide the reduction of radiated acoustic power by changing the driving force location without the need to perform additional calculations or experiments.     

Coherent and tunable radiation with power enhancement from surface plasmon polaritons

Surface plasmon polaritons excited by an electron beam can be transformed into coherent and tunable light radiation waves with power enhancement in the simple structure of a metal film with a dielectric medium loading. In this paper, the process of the radiation transformation of this radiation, and the dependencies of the radiation characteristics on the parameters of the structure and the electron beam are studied in detail. The radiation power enhancement is greatly influenced by the beam energy and the film thickness in the infrared to ultraviolet frequency region. Up to 122 times radiation power enhancement and 6.5% radiation frequency tuning band can be obtained by optimizing the beam energy and the parameters of the film.     

高功率超宽带脉冲辐射实验装置研制

研制了高功率超宽带脉冲辐射实验装置。该装置主要由脉冲充电电源、超宽带脉冲产生装置、超宽带脉冲发射天线三部分组成。达到的主要指标为：脉冲电源输出电压600 kV、重复频率100 Hz;脉冲压缩输出峰值功率约10 GW、脉宽1.2 ns;在辐射天线轴上220 m处,辐射峰值电场16.1 kV/m、等效辐射功率0.42×1012 W;辐射场E面方向图半功率宽度为8°,H面方向图半功率宽度为9°。