Influence of particle diameter on the morphology of micron-sized, monodispersed composite polymer particles produced by seeded polymerization for the dispersion of highly monomer-swollen polymer particles

 Micron-sized, monodispersed polystyrene (PS)/poly (n-butyl methacrylate) (PBMA) composite particles, in which the PS domain(s) were dispersed in a PBMA continuous phase, were produced by seeded polymerization for dispersions of n-butyl methacrylate (BMA) swollen PS particles in a wide range of PS/BMA ratios in the presence of NaNO₂ as a water-soluble inhibitor. Moreover, in order to change the diameter of the composite particles at same PS/BMA ratio, PS/PBMA (1/150 w/w) composite particles were produced using five kinds of PS particles in a range of diameters from 0.64 to 3.27 μm as seeds. The percentages of the PS/PBMA composite particles having double and triple and over PS domains, which were thermodynamically unstable morphologies, increased with the increase in the diameter of BMA swollen PS particles. There was a clear influence of the size of the swollen particles on the morphology of the PS/PBMA composite particles produced. Received: 30 September 1999/Accepted: 18 April 2000     

Production of micron-sized monodispersed composite polymer particles by seeded polymerization utilizing the dynamic swelling method

 In order to develop the seeded polymerization technique utilizing the dynamic swelling method (DSM) proposed by authors for the production of micron-sized mono-dispersed “composite” polymer particles consisting of two kinds of polymers, the seeded polymerization for the dispersion of ethyl methacry-late (EMA)-swollen PS particles prepared utilizing DSM was carried out. Monodispersed PS/poly(ethyl methacrylate) (PEMA) composite particles having 7 μm in diameter were produced by the addition of NaCl to lower the solubility of EMA in medium and by the addition of CuCl₂ as a water-soluble inhibitor to depress the by-production of submicron-sized PEMA particles. Received: 16 July 1996 Accepted: 10 October 1996     

Influence of the swelling state of seed polymer particles with monomer on the morphology of micron-sized monodispersed composite polymer particles produced by seeded polymerization utilizing the dynamic swelling method

 Micron-sized mono-dispersed polystyrene (PS)/poly(n-butyl methacrylate) (PBMA) composite particles (PS/PBMA=2/1 by weight) having a heterogeneous structure in which many fine PBMA domains dispersed in a PS matrix near the particle surface were produced by seeded polymerization of n-butyl methacrylate (BMA) of which almost all had been absorbed by 1.8 μm-sized monodispersed PS seed particles utilizing the dynamic swelling method. The morphology was varied by changing the PS/BMA ratio and polymerization temperature. It was concluded that the swelling state of 2 μm-sized BMA-swollen PS particles in the seeded polymerization process is one of the important factors to control the morphology of the composite particles. Received: 27 November 1996 Accepted: 21 March 1997     

Production of micron-sized monodispersed core/shell composite polymer particles by seeded dispersion polymerization

 The effect of the weight ratio of seed polymer/monomer on the morphology of the poly(methyl methacrylate) (PMMA)/polystyrene (PS) monodispersed composite particles produced by batch seeded dispersion polymerization of styrene with 1.64-μm-sized monodispersed PMMA seed particles in a methanol/water medium (4/1 w/w) was examined. In the PMMA/PS weight ratios of 3/1 and 2/1, the composite particles had a clear morphology consisting of a PMMA core and a PS shell. In the ratio of 1/1, a lot of small PS domains were observed in the PMMA core though the PS shell was still formed. By stepwise addition of styrene monomer, the formation of the small PS domain was depressed and complete core/shell morphology was formed. Absorption/release treatments of toluene into/from the PMMA/PS (1/1 w/w) composite particles resulted in a drastic morphological change from the core/shell structure to a multi- layered one. Received: 2 February 1999 Accepted in revised form: 7 April     

Production of micron-sized monodispersed polymer particles by seeded polymerization for the dispersion of highly monomer-swollen particles prepared with submicron-sized polymer seed particles utilizing the dynamic swelling method

For the purpose of extending the size range of polymer seed particles used in “dynamic swelling method” (DSM), first it was verified theoretically that the submicron-sized polymer particles produced by emulsion polymerization can also absorb a large amount of monomer by DSM in both equilibrium and kinetic control states. Next, on the basis of the theoretical results, experimentally about 2.6 μm-sized styrene-swollen polystyrene (PS) particles were prepared utilizing DSM in the presence of 0.64 μm-sized monodispersed PS seed particles produced by emulsifier-free emulsion polymerization. Moreover, 2.5 μm-sized monodispersed PS particles were produced by the addition of cupric chloride as a water-soluble inhibitor to depress the by-production of submicron-sized PS particles in the seeded polymerization at 30°C with 2,2′-azobis(4-methoxy-2,4-dimethylvaleronitrile) initiator. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2513–2519, 1998     

Micron-sized monodispersed polymer particles produced by seeded polymerization for the dispersion of high swelling of polymer particles with a large amount of monomer

 Micron-sized monodispersed polystyrene (PS)/poly(n-butyl methacrylate) composite particles were produced as follows. First, 1.77 μm-sized monodispersed PS seed particles produced by dispersion polymerization were dispersed in ethanol/water (1/2, w/w) medium dissolving poly(vinyl alcohol) as a stabilizer. n-Butyl methacrylate (BMA) monomer dissolving benzoyl peroxide initiator was emulsified in ethanol/water (1/2, w/w) solution of sodium dodecyl sulfate as emulsifier with ultrasonic homogenizer, and the BMA monomer emulsion was mixed with the PS seed emulsion. The PS seed particles absorbed with a large amount of BMA (about 150 times weight of the seed particles) for 2 h to about 10 μm in diameter while keeping good monodispersity and BMA droplets disappeared finally. The seeded polymerization was carried out at 70 °C after a certain amount of water was added to depress the redissolving of BMA from the swollen particles into the medium by raising from room temperature to the polymerzation temperature. Received: 21 February 1996 Accepted: 4 September 1996     

Production of micron-sized, monodispersed, multilayered composite polymer particles by multistep seeded dispersion polymerization

 Micron-sized, monodispersed, poly(methyl methacrylate) (PMMA)/polystyrene (PS)/PMMA/PS multilayered composite particles were successfully produced by three-step seeded dispersion polymerizations in methanol/water media. The first seeded dispersion polymerization was carried out with 2-μm-sized, monodispersed PMMA particles.     

Morphology of anomalous polystyrene/ polybutyl acrylate composite particles produced by seeded emulsion polymerization

 Recently, we found that “golf ball”-like polystyrene (PS)/polybutyl acrylate (PBA) composite particles could be produced by seeded emulsion polymerization of butyl acrylate (BA) with PS seed particles. In this article, the effects of the polymerization temperature, BA monomer concentration, and the presence of 1-octanol, which is a good solvent for PBA and a poor solvent for PS in the polymerization, on the morphology was studied. Received: 25 February 1997 Accepted: 4 October 1997     

Morphology of micron-sized monodispersed poly(butyl methacrylate)/polystyrene composite particles produced by seeded dispersion polymerization

In order to develop the seeded dispersion polymerization technique for the production of micron-sized monodispersed core/shell composite polymer particles the effect of polymerization temperature on the core/shell morphology was examined. Micron-sized monodispersed composite particles were produced by seeded dispersion polymerizations of styrene with about 1.4-μm-sized monodispersed poly(n-butyl methacrylate) (Pn-BMA) and poly(i-butyl methacrylate) (Pi-BMA) particles in a methanol/water (4/1, w/w) medium in the temperature range from 20 to 90 °C. The composite particles, PBMA/polystyrene (PS) (2/1, w/w), consisting of a PBMA core and a PS shell were produced with 2,2′-azobis(4-methoxy-2,4-dimethyl valeronitrile) initiator at 30 °C for Pn-BMA seed and with 2,2′-azobis(isobutyronitrile) initiator at 60 °C for Pi-BMA seed. The polymerization temperatures were a little above the glass-transition temperatures (T _g) of both Pn-BMA (20 °C) and Pi-BMA (40 °C). On the other hand, when the seeded dispersion polymerizations were carried out at much higher temperatures than the T _g of the seed polymers, composite particles having a polymeric oil-in-oil structure were produced. Received: 14 October 1998 Accepted in revised form: 2 June 1999     

Production of micron-sized monodispersed core/shell polymethyl methacrylate/polystyrene particles by seeded dispersion polymerization

 Micron-sized monodispersed polymethyl methacrylate (PMMA)/polystyrene (PS) (PMMA/PS=2/1, wt ratio) composite particles consisting of PMMA-core and PS-shell were successfully produced by seeded dispersion polymerization of styrene in a methanol/water medium in the presence of about 2 μm-sized monodispersed PMMA particles. From the view point of thermodynamic equilibrium, such a morphology is difficult to form by usual seeded polymerization in a polar medium such as water. It is concluded that seeded dispersion polymerization in which almost all monomers and initiators exist in the medium has an advantage to produce core/shell polymer particles in which polymer layers accumulate in their order of the production regardless of the hydrophobicity of polymers, because of high viscosity in polymerizing particles. Received: 9 December 1996 Accepted: 26 February 1997     

Production of micron-sized, monodisperse composite polymer particles having epoxy groups by seeded dispersion polymerization

 Micron-sized, monodisperse polystyrene (PS)/glycidyl methacrylate–divinylbenzene copolymer core/shell composite particles having epoxy groups in the shells were produced by seeded dispersion copolymerization of glycidyl methacrylate and divinylbenzene in an ethanol/water medium with 1.65-μm-sized, monodisperse PS seed particles. By chemical modifications of epoxy groups with sodium hydrogensulfite and dimethylamine, composite polymer particles having sulfonate and dimethylamino groups, respectively, in the shells were prepared. Received: 13 September 2000 Accepted: 31 January 2001     

Influences of the locations of monomer and initiator in the seeded polymerization systems on the morphologies of micron-sized monodispersed composite polymer particles

Three kinds of micron-sized monodispersed polystyrene (PS)/poly(n-butyl methacrylate) (PBMA) composite particles (PS/BMA=2/1, wt. ratio) were produced by two kinds of seeded polymerizations ofn-butyl methacrylate (BMA) in the presence of about 2 m-sized monodispersed PS particles, and their morphologies were examined. One was produced by a seeded dispersion polymerization where almost monomers and initiators exist in an ethanol/water (1/1, w/w) medium. The others two were produced by seeded polymerizations utilizing the dynamic swelling method, where almost monomers exist in the PS seed particles, with 2,2-azobisisobutyronitrile initiator in the monomer-swollen particles and with 2,2-azobis [2-(2-imidazolin-2-yl)propane] initiator in an ethanol/water (1/5, w/w) medium. In the former polymerization, the produced composite particles had a core-shell structure consisting of a PS-core and a PBMA-shell, whereas in the latter two polymerizations, they had a POO (Polymeric Oil-in-Oil) structure consisting of a PS-matrix and many PBMA-domains, regardless of the location of initiator in the systems. From these results, it is concluded that the location of BMA monomer in the seeded polymerization systems with micron-sized monodispersed PS seed particles greatly affects the morphologies of produced PS/PBMA composite particles.Part CLI of the series Studies on Suspension and Emulsion     

The morphology of composite polymer particles produced by multistage soapless seeded emulsion polymerization

 Composite polymer particles which contain poly(methyl methacrylate) (PMMA) and polystyrene (PS) components (PMMA/PS composite particle) were synthesized by the method of multistage soapless seeded emulsion polymerization. In this study, the process of multistage soapless seeded emulsion polymerization included two-stage polymerization, three-stage polymerization or four-stage polymerization. The morphologies of the PMMA/PS composite particles were studied. The kinetic factor was the main force to control the morphology of the linear PMMA–PS composite particles which were synthesized by the method of two-stage reaction. Both the kinetic factor and the thermodynamic factor decide the morphology of the linear composite particles which were synthesized by the method of either three-stage or four-stage reaction. However, the thermodynamic factor cannot influence the morphology of the PMMA/PS composite particles with a cross-linked structure which were synthesized by the method of three-stage reaction. The cross-linked composite polymer particles had the morphology of a multilayer structure, which showed that the polymer layers accumulated in their order of production. Received: 9 January 2001 Accepted: 14 June 2001     

Influence of viscosity within polymerizing particle on the morphology of micron-sized,monodisperse composite polymer particles produced by seeded polymerization for the dispersion of highly monomer-swollen polymer particles

Micron-sized, monodisperse polystyrene (PS)/poly( n-butyl methacrylate) (PBMA) composite particles, in which PS domain(s) were dispersed in a PBMA continuous phase, were produced by seeded polymerization for the dispersion of highly n-butyl methacrylate (BMA)-swollen PS particles (PS/BMA=1/150, w/w) using various concentrations of benzoyl peroxide as initiator in the absence/presence of sodium nitrite (NaNO ₂) as a water-soluble inhibitor. The percentages of the composite particles having double, triple and over PS domains, which were thermodynamically unstable morphologies, increased with a rapid increase of viscosity within the polymerizing particle.     

Preparation of micron-sized, monodispersed, anomalous polymer particles by utilizing the solvent-absorbing/releasing method

 About 2-μm-sized polystyrene (PS) particles having uneven surfaces were prepared by a posttreatment in which toluene-swollen PS particles were thrown into a methanol bath to release toluene therefrom rapidly. The posttreatment was named the “solvent-absorbing/releasing method”. The PS particle had large dents at the surface. The size of the dents was changed by the conditions of the posttreatment. Received: 3 August 1999/Accepted: 1 March 2000     

Production of micron-sized, monodispersed, multihollow polystyrene/poly(3,5-xylidine) composite particles by chemical oxidative seeded polymerization

 Micron-sized, monodispersed polystyrene/poly(3,5-xylidine) composite polymer particles were produced by chemical oxidative seeded polymerization of 3,5-xylidine with 1.37-μm-sized, monodispersed polystyrene seed particles. The chemical oxidative seeded polymerization was conducted in an aqueous medium at 25 °C in the presence of poly(vinyl alcohol) as a stabilizer using ammonium persulfate as an oxidant. The composite particles had a multihollow structure. Received: 30 June 1999/Accepted in revised form: 21 October 1999     

Control of hollow size of micron-sized monodispersed polymer particles having a hollow structure

Micron-sized monodispersed cross-linked polymer particles having one hollow in the inside were produced by seeded polymerization for the dispersion of (toluene/divinylbenzene)-swollen PS particles prepared utilizing the dynamic swelling method which the authors proposed. In order to control the hollow size, the weight ratio of toluene/PS was changed in the range of 520. The hollow size increased with an increase in the weight ratio. Even if benzene and xylene were used in place of toluene, similar hollow particles were produced, though the hollow size was affected by their solubility in water.Part CLIII of the series Studies on Suspension and Emulsion     

Formation mechanism of micron-sized monodispersed polymer particles having a hollow structure

 Recently, the authors reported that micron-sized monodispersed cross-linked polymer particles having a single hollow in the inside were produced by seeded polymerization for the dispersion of (toluene/divinylbenzene)-swollen polystyrene (PS) particles prepared utilizing the dynamic swelling method which the authors had proposed. In this article, the particles at various conversions of the seeded polymerization were observed with an optical microscope in detail. From the obtained results, the formation mechanism of the hollow structure is suggested as follows. As seeded polymerization proceeds, poly-divinylbenzene (PDVB) molecules precipitated in the swollen particle are trapped near the interface and gradually pile at the inner surface, which results in a cross-linked PDVB shell. PS which dissolves in the swollen particles is repelled gradually to the inside. After the completion of the polymerization, toluene in the hollow evaporates by drying, and PS clings to the inner wall of the shell uniformly. Received: 14 February 1997 Accepted: 16 April 1997     

Morphologies of micron-sized monodispersed composite polymer particles having crosslinked structures produced by seeded polymerizations

Three kinds of micron-sized monodispersed polystyrene (PS)/ poly(styrene - divinylbenzene) composite particles were produced by two kinds of seeded copolymerizations of styrene (S) and divinylbenzene (DVB) (PS seed/ (S+DVB)=2/1, wt. ratio; S/DVB=1/1, molar ratio) in the presence of about 2 μm-sized monodispersed PS particles, and their morphologies were examined. One was produced by a seeded dispersion copolymerization where almost monomers and initiators exist in an ethanol/water (12.6/4.0, w/w) medium. The others two were produced by seeded copolymerizations with the dynamic swelling method where almost monomers exist in the monomer-swollen particles using 2, 2'-azobisisobutyronitrile in monomer-swollen PS seed particles or using 4, 4'-azobis (4-cyanopentanoic acid) in an ethanol/water (7/43, w/w) medium. In the former polymerization, the produced composite particles had a high dense crosslinked shell, whereas in the latter two polymerizations, they did the comparatively homogeneous crosslinked structures.     

Preparation of micron-size monodisperse polymer particles by seeded polymerization utilizing the dynamic monomer swelling method

Utilizing a new type of monomer swelling method, 6.1 m-size monodisperse polymer particles were prepared by seeded polymerization. 1.8 m-size monodisperse polystyrene (PS) seed particles (1.8 m in size) were prepared by dispersion polymerization in ethanol-water (80/20, v/v) medium in the presence of poly(acrylic acid) as stabilizer with 2,2-azobisisobutyronitrile as initiator. The PS seed dispersion was mixed with ethanol-water (60/40, v/v) solution dissolving styrene (S) monomer, benzoyl peroxide as initiator, and poly(vinyl alcohol) as stabilizer. By slow, continuous, dropwise addition of water with a micro feeder into the mixture, the PS particles absorbed the many S monomers, which were separated from the medium and swelled from 1.8 m to 8.4 m while keeping the monodispersity high. We named this procedure the dynamic swelling method. Then, the seeded polymerization of the absorbed S monomer was carried out in the presence of NaNO₂ as water-solube inhibitor.Part CXXII of the series Studies on Suspension and Emulsion.