Magnetic properties of RNi5−xCux intermetallics

The magnetic properties have been studied for the series of RNi_5−xCu_x intermetallics with R=Y, La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Lu; x  ?2.5. Compositional dependences of magnetic susceptibility for the Pauli paramagnets (R=Y, La, Ce, Lu) and the Curie temperature for ferromagnets (R=Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm) have maximum at x=0.2–0.4$x=0.2–0.4$ and 1, respectively. The substitution of Cu for Ni is accompanied by decreasing spontaneous magnetic moment and increasing coercive force of all ferromagnetic RNi_5−xCu_x but GdNi_5−xCu_x. These results are explained in the frame of band magnetism, random local crystal field, and domain wall pinning theories.     

Temperature variation of electrical conductivity and absorption edge in Cu7GeSe5I advanced superionic conductor

Single crystals of Cu₇GeSe₅I superionic conductor were grown by chemical transport. Their electrical conductivity in the frequency range 1.0×10⁶–1.2×10⁹ Hz and in the temperature range 196–295 K was measured. Cu₇GeSe₅I crystal is shown to exhibit a rather high electrical conductivity (σ₂₉₅=64.0 S/m at 295 K) and a low activation energy (ΔE_a=0.125 eV). Optical absorption edge of Cu₇GeSe₅I crystals in the temperature range 77–300 K was studied, the temperature dependences of the optical pseudogap and Urbach energy being obtained. The effect of different types of disordering on the Urbach absorption edge and electron–phonon interaction parameters was investigated.     

Electrical and optical absorption studies of Cu7GeS5I fast-ion conductor

Electrical conductivity and fundamental absorption spectra of monocrystalline Cu₇GeS₅I were measured in the temperature ranges 95-370 and 77-373 K, respectively. A rather high electrical conductivity (σ_t=6.98×10⁻³Ω⁻¹ cm⁻¹ at 300 K) and low activation energy (ΔE_a=0.183 eV) was found. The influence of different types of disordering on the Urbach absorption edge and electron-phonon interaction parameters were calculated, discussed and compared with the same parameters in Cu₇GeS₅I, Cu₆PX₅I (X=S,Se) and Ag₇GeX₅I (X=S,Se) compounds. We have concluded that the P→Ge and Cu→Ag cation substitution results in an increase of the electrical conductivity and a decrease of the activation energy. Besides, P→Ge substitution, results in complete smearing and disappearance of the exciton absorption bands and in blue shift of the Urbach absorption edge, an increase of the edge energy width and an electron-phonon-interaction enhancement.     

Hard magnetic properties of ErCo7−xCux [0.3⩽x⩽1] system

We report the observation of excellent hard magnetic properties on purely single phase ErCo_7−xCu_x compounds with x=0.3, 0.5, 0.8 and 1. Cu substitution leads to a decrease in the saturation magnetization, but enhances the uniaxial anisotropy in this system. The large anisotropy field (∼100 kOe) is attributed to the Er and the Co sublattices. Domain wall pinning effect seems to play a crucial role in determining the temperature and field dependences of magnetization in these compounds. The hard magnetic properties obtained at room temperature (RT) are comparable to the best results obtained in other RCo₇ based materials.     

Study of magnetic properties of Mn1−xCuxCr2S4 by: High-temperature series expansions

The high-temperature series expansions method applied in the systems Mn_1−xCu_xCr₂S₄ in the range 0?x?1. The exchange interactions and the magnetic exchange energies are calculated by using the probability law. The high-temperature series expansions have been applied in the spinel Mn_1−xCu_xCr₂S₄ systems, combined with the Padé approximants method, to determine the magnetic phase diagram, i.e. T_C versus dilution x. The critical exponent associated with the magnetic susceptibility (γ) is deduced. The obtained value of γ is insensitive to the dilution ratio x and may be compared with other theoretical results based on 3D Heisenberg model.     

The size and space arrangement roles on coercivity of electrodeposited Co1−xCux nanowires

Magnetization curves with various magnetic field orientations and nanowire diameters were measured at room temperature. The measured coercivity as a function of angle (θ) between the field and wire axis reveals that the coercivity decreases with increasing value of θ for various nanowires. Theoretically, based on Monte Carlo simulation we investigated the magnetization reversal modes of the Co_1−xCu_x nanowires and obtained also the θ dependence of the coercivity. Comparing the simulated with the experimental results, we find that the magnetocrystalline anisotropy plays an important role on the magnetic properties of Co_1−xCu_x nanowires, and the magnetization reversal process in the Co_1−xCu_x nanowires could not be understood by the classical uniform rotation mode in the chain-of-sphere model.     

Theoretical study of CuxAg1−xI alloys

We have performed first-principles calculations using full potential linearized augmented plane wave (FP-LAPW) method within density functional theory (DFT) to investigate the fundamental properties of Cu_xAg_1−xI alloys. We used both GGA96 [J.P. Perdew, K. Burke, M. Ernzerhof, Phys. Rev. Lett. 77 (1996) 3865.] and EVGGA [E. Engel, S.H. Vosko, Phys. Rev. B. 47 (1993) 13164.] generalized gradient approximations of the exchange-correlation energy that are based on the optimization of total energy and corresponding potential. Quantities such as lattice constants, bulk modulus, band gap, density of occupied states and effective mass were calculated as a function of copper molar fraction x. These parameters were found to depend non-linearly on alloy composition x, except the lattice parameter, which follows Vegard's law. The microscopic origins of the gap bowing were explained using the approach of Zunger and co-workers; we have concluded that the band-gap energy bowing was mainly caused by the chemical charge-transfer effect and the volume deformation , while the structural relaxation contribute to the gap bowing parameter at smaller magnitude. The calculated phase diagram shows a broad miscibility gap for this alloy with a high critical temperature.     

Metal to insulator transition in Mn substituted underdoped NdBa2Cu3O7−y: Evidence of strong charge localization

We have synthesized underdoped NdBa₂Cu₃O_7−y (NBCO) and NdBa₂Cu_3−xMn_xO_7−y (x = 0.1, 0.2, and 0.3) samples. The analysis of the lattice parameters has been done by using the X-ray diffraction (XRD) method. Using the Scanning Electron Microscope (SEM) the granular nature as well as the intergranular networks has been studied. The Energy Dispersive X-ray (EDX) and Rutherford Backscattering Spectroscopy (RBS) studies confirm the substitution of Mn in the Cu-sites. The transport measurements in several undoped and Mn-substituted NBCO samples have been carried out. We have observed an indication of the metal to insulator transition as a result of the strong charge localization induced by Mn substitution. The applicability of various conductivity equations has been verified for comparison. Estimations of the activation energy and localization length have been carried out and discussed.     

Magnetic phase diagram of diluted spinel Zn1−xCuxCr2Se4 system

By using mean field theory, we have evaluated the nearest-neighbour and the next-neighbour super-exchange J₁(x) and J₂(x), respectively, for Zn_1−xCu_xCr₂Se₄ in the range 0?x?1. The intraplanar and the interplanar interactions are deduced. High-temperature series expansions are derived for the magnetic susceptibility and two-spin correlation functions for a Heisenberg ferromagnetic model on the B-spinel lattice. The calculations are developed in the framework of the random phase approximation. The magnetic phase diagram is deduced. A spin glass phase is predicted for intermediate range of concentration. The results are comparable with those obtained by magnetic measurements. The critical exponents associated with the magnetic susceptibility (γ) and the correlation lengths (ν) have been deduced. The values are comparable to those of the 3D Heisenberg model, and are insensitive to the dilution x.     

On the existence of a homologous series of BamCum+nOy oxides with the cubic structure of the BaCuO2 oxide

Phase relations have been studied in the BaO–CuO_x system in the range of 42.0–83.0 mol.% CuO at P(O₂) = 21 kPa (air) by visual polythermal analysis (VPA), powder X-ray diffraction (XRD), differential thermal analysis (DTA), thermogravimetric analysis (TGA), chemical analysis (CA), and electron diffraction (ED) with simultaneous elemental analysis (EA) in a transmission electron microscope (TEM). The existence of discrete crystallization fields of barium–copper oxides of cation compositions Ba₄Cu₅O_y, Ba₅Cu₆O_y, Ba₇Cu₈O_y, Ba₁₂Cu₁₃O_y, and Ba₂₄Cu₂₅O_y, which have the cubic structure of the BaCuO₂ oxide, is revealed in the studied region of the system. The oxides may be represented as members of a Ba_mCu_m+nO_y homologous series. The BaCuO₂ oxide does not exist in the subsolidus region and does not have its own crystallization field. The oxygen-deficient oxide BaCuO_1.78 of the cation composition (Ba:Cu) 1:1 with the BaCuO₂ cubic structure is found in melted samples of the 50.0 mol.% CuO composition quenched at 1020–1060 °С.     

Magnetic properties of half-metallic semi Heusler Co1−xCuxMnSb compounds

A study of the half-metallic character of the semi Heusler alloys Co_1−xCu_xMnSb (0?x?0.9) is presented. We investigated the saturation magnetization M_S at temperatures from 5 K to room temperature and the temperature dependence of the DC magnetic susceptibility χ above Curie temperature T_C. The magnetic moments at 5 K, for most compositions are very close to the quantized value of 4 μ_B for Mn³⁺ ion, the compound with 90% Co substituted by Cu is still ferromagnetic with M_S (5 K)=3.78 μ_B/f.u. These results emphasize the role of Co atoms in maintaining the ferromagnetic order in the material. The Curie temperature is decreased from 476 K to about 300 K as the Cu content increases from 0% to 90%. Above T_C, the χ⁻¹ vs T curves follow very well the Curie–Weiss law. The effective moment μ_eff and paramagnetic Curie temperature θ are derived. A comparison between the values of M_S at 5 K and μ_eff shows a transition from localized to itinerant spin system in these compounds.     

The existence of giant magnetocaloric effect and laminar structure in Fe73.5−xCrxSi13.5B9Nb3Cu1

Amorphous soft magnetic ribbons Fe_73.5−xCr_xSi_13.5B₉Nb₃Cu₁ (x=1–5) have been fabricated by rapid quenching on a single copper wheel. The differential scanning calorimetry (DSC) patterns showed that the crystallization temperature of α-Fe(Si) phase is ranging from 542 to 569 °C, a little higher than that of pure Finemet (x=0). With the same annealing regime, the crystallization volume fraction as well as the particle size of α-Fe(Si) crystallites decreased with increasing Cr amount substituted for Fe in studied samples. Especially, the interesting fact is that the laminar structure of heat-treated ribbons on the surface contacted to copper wheel in the fabricating process has been firstly discovered and explained to be related to the existence of Cr in studied samples. The hysteresis loop measurement indicated that there is the pinning of displacement of domain walls. The giant magnetocaloric effect (GMCE) has been found in amorphous state of the samples. After annealing, the soft magnetic properties of investigated nanocomposite materials are desirably improved.     

Synthesis and structure refinement of layered perovskites Ba5−xLaxNb4−xTixO15 (x=0, 1, 2, 3 and 4) solid solutions

Ba_5−xLa_xNb_4−xTi_xO₁₅ solid solutions were prepared by solid state reaction method. Structural analysis for the stoichiometric phases was performed for x=0, 1, 2 and 3 by Rietveld analysis of neutron powder diffraction data. The x=0, 1 and 2 members could be refined in the space group P-3m1 (stacking sequence chhcc, polytypoid 5 H). There is a decrease in cell volume as x increases. La³⁺ occupies preferentially the A2 site (Wyckoff site 2d) and Ti⁴⁺ the B2 site (Wyckoff site 2c). As x increases there is an increase of the global instability index (GII) (which is a measure of the extent to which the BVS rule is violated over the whole structure) indicating the presence of intrinsic strains large enough to cause instability at room temperature. This strain is responsible for a structural change for the member with x=3, which could be refined in the space group P-3c1 (stacking sequence (chhcc)₂, polytypoid 2×5H=10H). This change in space group is associated with a cooperative rotation of (Nb/Ti)O₆ octahedra around the c-axis, necessary to accommodate the smaller La³⁺ ion in the cuboctahedral cavity.     

Structural and magnetic properties of SmCo7−xMox alloys

Phase structure and magnetic properties of the as-cast and as-milled/annealed SmCo_7−xMo_x (x=0, 0.1, 0.2, 0.3, 0.4) alloys have been systematically studied. It is found that all the as-cast series alloys are composed of the CaCu₅-type and Th₂Zn₁₇-type phases. Saturation magnetization of the samples decreases with the Mo content increasing. Intrinsic coercivities (_iH_c) of no more than 0.06 T are observed in these as-cast samples, due to their rather coarse grain microstructures with an average grain size of 50 μm. The as-milled/annealed SmCo_7−xMo_x powders crystallize in the disordered TbCu₇-type (1:7) structure with very fine nanograins, and a minor Co₃Mo phase appears in the samples with x=0.1-0.4. High _iH_c (?0.95 T) are achieved in these samples, with a maximum of 1.26 T located at x=0.2, which can be primarily attributed to strong pinning of the domain wall motion at the nanograin boundaries. The temperature coefficient (β) of the _iH_c is about −0.22%/°C in the temperature range of 25-400 °C for the as-milled/annealed samples.     

Urbach rule and disordering processes in Cu6P(S1−xSex)5Br1−yIy superionic conductors

Compositional behavior of Urbach absorption edge is studied as well as the effect of compositional disordering on the parameters of exciton-phonon interaction, phase transition temperatures and electric conductivity in Cu₆P(S_1−xSe_x)₅Br_1−yI_y superionic solid solutions. The effect of different types of disordering on the optical absorption processes and specific features of compositional changes in the absorption edge spectra under S→Se and Br→I anion substitution in the mixed crystals are investigated. (x, T) phase diagrams for Cu₆P(S_1−xSe_x)₅X (X=I, Br) solid solutions are studied.     

Spin-glass behavior of RNi1−xCuxAl compounds

The NdNi_1−xCu_xAl compounds were studied by means of heat-capacity, magnetization and AC-susceptibility measurements. The previously observed loss of long-range magnetic order in other RNi_1−xCu_xAl series with R=Tb, Dy, Er around x=0.6-0.8 that is accompanied by enhanced tendency to spin-glass character of behavior, is spread to wider concentration region of x=0.4-0.8 in the case of the newly studied Nd-based series, a candidate with rare-earth element coming from the light rare-earth group.     

Oxygen vacancy doping effect on the electrical and magnetic behavior of Ba5−xLaxNb4−xTixO15

We report electric and magnetic properties of oxygen deficient Ba_5−xLa_xNb_4−xTi_xO_15−δ phases, which have been prepared by solid-state reaction method followed by a controlled reduction process under hydrogen atmosphere. The extra electrons added by the formation of the oxygen vacancies (δ) introduce localized spins and the magnetic susceptibility can be described by a temperature-independent contribution and a Curie-Weiss term associated to the Ti³⁺ ion formation. Besides, the experimental resistivity (ρ) data of these four reduced compounds are well described in a wide temperature range with the equation , which suggests the presence of small polarons in the system. Although, all samples present electrical insulating behavior, the electrical resistivity decreases four orders of magnitude for intermediate x values. We interpreted this fact as a consequence of the mix between the localized bands of the Nb and Ti ions, which favors the promotion of carriers due to reduction of the band gap.     

Magnetic and transport properties in Sr1−xLaxFe1−xMnxO3

The magnetic and transport properties in the perovskite Sr_1−xLa_xFe_1−xMn_xO₃ have been explored. As x rises, the systemic ferromagnetism increases gradually and cluster-spin-glass state occurs in the low-temperature region. For 0.3?x?0.7, the ferromagnetic phase separation from the paramagnetic phase was observed from the results of electron-spin-resonance measurement. Although all samples show a semiconducting behavior, their transport properties are dominated by two different mechanisms, namely, the electronic transport of x?0.5 samples is realized by thermal activation but the variable-range hopping is applied in x?0.7 ones. The different transport mechanism can be understood from the Mn/Fe ions interaction.     

Theoretical investigations on KClxBr1−x, KClxI1−x and KBrxI1−x: A first-principles study

Using first-principles total energy calculations within the full-potential linearized augmented plane wave (FP-LAPW) method, we have investigated the structural, electronic and thermodynamic properties of potassium halides (KCl_xBr_1−x, KCl_xI_1−x and KBr_xI_1−x), with x concentrations varying from 0% up to 100%. The effect of composition on lattice constants, bulk modulus, band gap and dielectric function was investigated. Deviations of the lattice constants from Vegard's law and the bulk modulus from linear concentration dependence (LCD) were observed for the three alloys. The microscopic origins of the gap bowing were explained by using the approach of Zunger and coworkers. On the other hand, the thermodynamic stability of these alloys was investigated by calculating the excess enthalpy of mixing ΔH_m as well as the phase diagram.     

Second-harmonic generation in the thermal/electrical poling (100−x)GeS2·x(0.5Ga2S3·0.5CdS) chalcogenide glasses

Utilizing Maker fringe (MF) method, second-harmonic generation (SHG) has been observed within the GeS₂-Ga₂S₃-CdS pseudo-ternary glasses through thermal/electrical poling technique. The SHG phenomenon was considered to be the result of breakage of the glassy macroscopic isotropy originated from the reorientations of dipoles during the thermal/electrical poling process. Under the same poling condition conducted with 5 kV and 280 °C for 30 min, the maximum value of second-order nonlinear susceptibility χ⁽²⁾ of the poled (100−x)GeS₂·x(0.5Ga₂S₃·0.5CdS) glasses was obtained to be ≈4.36 pm/V when the value of x is equal to 30. Nonlinear dependence of χ⁽²⁾ on compositions of these glasses can be well explained according to the theory related to the reorientation of dipoles.