Shifting of transition temperature of ferroelectric liquid crystals due to addition of dye-An optical and dielectric study

In order to study the shifting of phase transition temperature of ferroelectric liquid crystals due to addition of dye molecules, we have investigated two ferroelectric liquid crystal materials (Felix 16/030 and Felix 16/100) and their five mixtures with Anthraquinone dye (1%, 2%, 3%, 4% and 5% wt/wt). The phase transition scheme has been investigated and analyzed by results obtained from the optical transmittance and the dielectric permittivity study with variation of temperature in the range of 30 to 100 °C. Both the samples clearly show the shifting of phase transition temperature with dye concentration, especially the SmC*-SmA phase transition temperature. It is also clear from the study that SmC*-SmA phase transition phenomenon also becomes stronger with the addition of dye molecules. A theoretical explanation has also been given for shifting of phase transition temperature. The amount of shift in transition temperature agrees well as obtained from optical and dielectric studies.     

Dielectric, thermal and optical study of an unusually shaped liquid crystal

Dielectric measurements have been carried out for the determination of real and imaginary parts of the permittivity of a newly synthesized, unusually shaped liquid crystal. The sample has been investigated in the frequency range from 100 Hz to 10 MHz within a temperature range 80-130 °C. The dielectric measurements in the smectic A phase indicate a Cole-Cole type of dispersion, and the activation energy was found to be 5.5 meV by using the Arrhenius plot of relaxation time. In addition to this, thermal and optical transmittance studies have also been conducted in the above mentioned temperature range, and the temperature dependence of these parameters has been discussed in detail. The phase transition temperature obtained from a differential scanning calorimetry (DSC) study matches within 2 °C that was obtained from an optical transmittance study. The dielectric and optical behavior of the unusually shaped liquid crystal has been explained on the basis of a proposed theoretical model in which a sample possesses two different conformers having induced polarizations in opposite directions.     

Piezoelectric non-linearity in PbSc0.5Ta0.5O3 thin films

Epitaxial (001)-oriented PbSc_0.5Ta_0.5O₃ (PST) thin films were deposited by pulsed laser deposition. Local piezoelectric investigations performed by piezoelectric force microscopy show a dual slope for the piezoelectric coefficient. A piezoelectric coefficient of 3 pm/V was observed at voltages up to 0.8 V. However, at voltages above 0.8 V, there is a steep increase in piezoelectric coefficient mounting to 23.2 pm/V. This nonlinear piezoelectric response was observed to be irreversible in nature. In order to better understand this nonlinear behavior, voltage dependent dielectric constant measurements were performed. These confirmed that the piezoelectric non-linearity is indeed a manifestation of a dielectric non-linearity. In contrast to classical ferroelectric systems, the observed dielectric non-linearity in this relaxor material cannot be explained by the Rayleigh model. Thus the dielectric non-linearity in the PST films is tentatively explained as a manifestation of a percolation of the polar nano regions.     

Dielectric relaxation spectroscopy of guest-host ferroelectric liquid crystals: influence of anthraquinone dye

The dielectric spectroscopy of a short pitch and high spontaneous polarization ferroelectric liquid crystal mixture and its guest-host derivatives with different wt/wt ratio of anthraquinone blue dichroic dye has been studied over a wide frequency range of 50 Hz-1 MHz. The increase in dye concentration results in the decrease of the permittivity of the material in the SmC* phase, however, an opposite effect is observed in the SmA phase. The influence of bias voltage on the dielectric parameters has also been investigated. A new relaxation mode has been observed with a relaxation frequency of ∼300 kHz and dielectric strength of ∼5 at room temperature.     

Investigation of dielectric properties and diffraction efficiency enhancements caused by photothermal effect in DR9 dye-doped nematic liquid crystal

In this work, we studied dielectric properties and laser-induced refractive index changes originating from photothermal effects of liquid crystal material doped with Disperse Red 9 (DR9) dye. Dye concentration is arranged to be between percentages changing from 0.2 wt.% to 1 wt.% in E63 nematic liquid crystal. Nonlinear optical properties such as diffraction efficiency (η) and refractive index modulation (Δn) were investigated by diffraction grating measurements. It was found the diffraction efficiency of pure E63 nematic liquid crystal is 1%. As the doping amount of DR9 dye in nematic LC is increased, diffraction efficiency took higher values and the maximum diffraction efficiency of 10% was gained with E63 doped with 0.8 wt.%DR9 dye. Moreover, dielectric permittivity and dielectric anisotropy values of the samples were investigated in the frequency range of 100 Hz-10 MHz by using dielectric spectroscopy technique. It was observed that dielectric constant values of the liquid crystal material are strongly affected by doping with dye.     

Characteristic dielectric parameters of para-, ferro- and antiferro-electric phases of (S)-4-(1-methylheptyloxycarbonyl)phenyl-4′-(6-pentanoyloxyhex-1-oxy)biphenyl-4-carboxylate

Frequency and temperature dependence of dielectric parameters of a liquid crystalline compound (S)-4-(1-methylheptyloxycarbonyl)phenyl-4′-(6-pentanoyloxyhex-1-oxy)biphenyl-4-carboxylate under planar orientation of the molecules have been investigated in the frequency range 1 Hz-10 MHz. This compound possesses smectic paraelectric (SmA*), ferroelectric (SmC*) and antiferroelectric (SmC_A*) phases. Dielectric spectroscopy suggests the existence of a relaxation mechanism in the SmA* phase, which behaves as a soft mode. In the SmC* phase two relaxation modes are observed. One mode continues from the SmA* phase with decreasing dielectric strength and the other has characteristics of the Goldstone mode. Two dielectric relaxation modes have been observed for the SmC_A* phase. These two modes are related to the antiferroelectric ordering and the helical structure of the SmC_A* phase.     

Post-sintering annealing effect on the diffuse phase transition in (Pb1−xBax)(Yb0.5Ta0.5)O3 ceramics

The effect of post sintering annealing on the dielectric response of (Pb_1−xBa_x)(Yb_0.5Ta_0.5)O₃ ceramics in the diffuse phase transition range (x=0.2) has been investigated. The samples are prepared by conventional solid-state reaction method. The samples are sintered at 1300 °C for 2 h and annealed at different temperatures (800, 900 and 1000 °C) for 8 h and at 800 °C for different time durations (8, 12 and 24 h). A significant change in the dielectric response has been observed in all the samples. The dielectric constant increases remarkably and the dielectric loss tangent decreases. The dielectric peaks of the annealed samples are observed to be more diffused with noticeable frequency dispersion compared to the as sintered sample.     

Dielectric and optical properties of polymer-liquid crystal composite

Dielectric properties of polymer-liquid crystal mixture, having constituent polymer, poly-butyl methacrylate (PBMA) and liquid crystal, cholesteryl nonanoate, are reported as a function of frequency and temperature. The measurement has been done in a temperature range of 300-375 K and frequency range of 100 Hz-10 MHz. The dielectric permittivity and dielectric loss shows significant changes with the addition of polymer molecules in liquid crystal. The significant feature of composite formation is that the pure liquid crystal and polymer do not show dielectric relaxation in the frequency range covered, while the composite shows relaxation peak at a particular frequency. The optical transmittance of pure liquid crystal and composite has also been measured and compared.     

Optical, thermal, dielectric and ferroelectric behaviour of sodium acid phthalate (SAP) single crystals

Sodium acid phthalate (SAP), an efficient semi-organic crystal having dimensions 17×8×2 mm³ has been grown from aqueous solution by slow evaporation technique at room temperature within the period of 2 weeks. The lattice parameters of the grown crystals were determined using single-crystal X-ray diffraction analysis. The presence of functional groups was estimated qualitatively by Fourier transform infrared (FTIR) analysis. The band gap energy was determined using optical absorption studies. The TG/DTA analysis reveals that the SAP crystal is thermally stable up to 141.6 °C. The dielectric constant and dielectric loss was studied as a function of frequency and the corresponding activation energy (E_a) has been calculated for the grown crystal. Scanning electron microscope studies enunciate the ferroelectric domain patterns of the SAP crystal. Ferroelectric property of the grown crystal was confirmed by hysteresis loop studies.     

Suppression of relaxation modes in dye dispersed SmC* phase

We report the results of dielectric and electro-optical properties of ferroelectric liquid crystal (FLC), Felix 17/100, exhibiting chiral smectic C phase and dye dispersed FLCs. The polarization measurement on pristine and dye dispersed FLC mixture shows decrease in the value of polarization, indicating the distribution of dye dipole in a direction opposite to the orientation of FLC molecule. The rotational viscosity also decreases accordingly as shown by the measurement of response time. Dielectric measurement shows existence of two relaxation modes both in pure FLC and dye dispersed FLC. The relaxation strength of Goldstone mode decreases with the dispersion of dye and the relaxation frequency of this mode shifts towards the high-frequency side. The second relaxation mode arises due to the formation of domains at the surface interface. The dispersion of dye into FLC suppresses the domains.     

Low-temperature sintering and electromagnetic properties of ferroelectric-ferromagnetic composites

Ferroelectric-ferromagnetic composites were prepared by the usual ceramic technology combined with the sol-gel method and sintered at 900 °C to adapt to the low-temperature co-fired ceramic (LTCC) technology. The ferroelectric ceramics in reasonable amounts can effectively decrease the RF loss, dielectric loss and increase the saturation magnetization. Variations of permeability, dielectric constant and loss tangent with the frequency in the range of 1 MHz-1.8 GHz have been discussed. The microstructures of the sintered ceramics were analyzed by scanning electron microscope (SEM). The influences of different composition on the electromagnetic properties of the composites have been investigated.     

Dielectric properties of ferroelectric/DMS heterointerface using YMnO3 and Ce doped Si

Bottom gate type Al/Si:8.2 at%Ce/YMnO₃/Pt capacitor was fabricated. Although it was polycrystalline, we successfully obtained Si:8.2 at%Ce film on ferroelectric YMnO₃. The dielectric properties of the capacitor were carefully investigated. Although the capacitance shows frequency dispersion, the capacitor exhibits a ferroelectric type C-V hysteresis loop. From the PUND and P-V measurements, ferroelectric polarization was distinguished from the another polarization, Based on these dielectric measurements, effect of polarization induced by the ferroelectric YMnO₃ on the carrier modulation in the diluted magnetic semiconductor, Ce doped Si film was discussed.     

Electrical conduction and magnetoelectric effect of (x) BaTiO3 + (1−x) Ni0.92Co0.03Cu0.05Fe2O4 composites in ferroelectric rich region

Particulate composites with composition (x)BaTiO₃+(1−x)Ni_0.92Co_0.03Cu_0.05Fe₂O₄ in which x varies as 1, 0.85, 0.70, 0.55 and 0 (in mol%) were prepared by the conventional double sintering ceramic technique. The presence of two phases viz. ferromagnetic (Ni_0.92Co_0.03Cu_0.05Fe₂O₄) and ferroelectric (BaTiO₃) was confirmed by X-ray diffraction analysis. The dc resistivity and thermo-emf measurements were carried out with variation of temperature. The ac conductivity (σ_ac) measurements investigated in the frequency range 100 Hz to 1 MHz conclude that the conduction in these composites is due to small polarons. The variation of dielectric constant and loss tangent with frequency (20 Hz to 1 MHz) was studied. The static magnetoelectric conversion factor, i.e. dc (dE/dH)_H was measured as a function of intensity of applied magnetic field. The changes were observed in electrical properties as well as in magnetoelectric voltage coefficient as the molar ratio of the constituent phases was varied. A maximum value of magnetoelectric conversion factor of 536.06 μV/cm Oe was observed for the composite with 70% BaTiO₃+30% Ni_0.92Co_0.03Cu_0.05Fe₂O₄ at a dc magnetic field of 2.3 K Oe. The maximum magnetoelectric conversion output has been explained in terms of ferrite-ferroelectric content, applied static magnetic field and resistivity.     

Pulsed laser deposition of perovskite relaxor ferroelectric thin films

Structural, dielectric and ferroelectric properties of thin films of La-doped lead zirconate titanate (PLZT) and sodium bismuth titanate-barium titanate (NBT-BT) perovskite relaxor ferroelectric have been investigated. PLZT films were deposited on Pt/Si substrates in oxygen atmosphere by pulsed laser deposition (PLD) and radio frequency (RF) discharge-assisted PLD, using sintered targets with different La content and Zr/Ti ratio, near or at the boundary relaxor ferroelectric. The films are polycrystalline with perovskite cubic or slightly rhombohedral structure. A slim ferroelectric hysteresis loop, typical for relaxors, has been measured for all film sets. Dielectric characterization shows a large value of capacitance tunability and low dielectric loss. However, common problems related to lead diffusion into the metallic electrode layer do not allow one to obtain high capacitance values, due to the formation of an interface layer with low dielectric constant. Lead-free NBT-BT thin films have been deposited on single crystal (1 0 0)-MgO substrates starting from targets with composition at the morphotropic phase boundary between rhombohedral and tetragonal phase. Films deposited by PLD are polycrystalline perovskite with a slight (1 0 0) orientation. Capacitance measurements were performed using interdigital metallic electrodes deposited on the film's top surface and showed high relative dielectric constant, on the order of 1300.     

Dielectric properties and phase transition of zinc tris(thiourea) sulfate single crystal

The dielectric properties and the ferroelectric to paraelectric phase transition of zinc tris(thiourea) sulfate (ZTS) single crystal have been investigated in a wide range of temperatures and frequencies. In the lower frequency region the real part of dielectric permittivity of the ZTS crystal shows a sudden increase at 323 K. Prominent first-order ferroelectric to paraelectric phase transition at 323 K has been observed in the plot of dielectric permittivity versus temperature at different frequencies. It has been observed that the phase transition occurs in ZTS crystal with a low degree of disorder. Surprisingly, it has been observed for ZTS that the value of the dielectric permittivity is only about 10 at high frequencies and is found to increase to 50 at low frequencies. Dielectric loss has higher values in the paraelectric region.     

Dielectric and AC conductivity behavior of BaBi2Nb2O9 ceramics

The complex dielectric and AC conductivity response of BaBi₂Nb₂O₉ relaxor ferroelectric ceramics were studied as a function of frequency (100 Hz-10 MHz) at various temperatures. The observed dielectric behavior was characterized by two types of relaxation processes which were described by the ‘universal relaxation law’. The frequency dependence of conductivity which showed a classical relaxor behavior followed the Jonscher's universal law σ(ω)=σ₀+Aωⁿ. The exponent n exhibited a minimum in the vicinity of temperatures of dielectric anomaly while the pre-factor A showed a maximum. The temperature dependence of n followed the Vogel-Fulcher relation with activation energy of about 0.14 eV.     

Study of the structural, dielectric and magnetic properties of Bi2O3 and PbO addition on BiFeO3 ceramic matrix

In this paper we studied the effects of Bi₂O₃ and PbO addition on BiFeO₃ (BFO) ceramic matrix. The structural, dielectric and magnetic properties of fifteen BFO samples were discussed in view of possible applications in RF and microwave devices. The present work also reports the preparation of the samples. Polyvinyl alcohol (PVA) and tetraethyl orthosilicate (TEOS) were also added as a binder in the fabrication procedure. The samples have been studied by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and magnetic hysteresis measurements. Further, a study based on impedance spectroscopy also has been done. Dielectric permittivity (ε′) and dielectric loss (tan δ) were measured at room temperature in the frequency range 100 Hz-10 MHz, as well as a.c. conductivity. The -Im[Z(f)] versus Re[Z(f)] plot has been obtained. The samples were investigated in view of possible applications like miniaturized filters, diplexers and dielectric resonator antennas (DRA). In the RF and MW frequency region, the application of magneto-dielectric and multiferroic perovskite composite materials is desirable for the miniaturization of components.     

Conductivity in Nd+K doped ferroelectric lead germanate single crystals

Nd⁺³+K⁺ doped ferroelectric lead germanate (LG) single crystals were grown to study the influence of the double dopants on ferroelectric behavior of LG. The crystals were grown by controlled cooling of the melt. Temperature variation of d.c. conductivity of the grown samples was studied in temperature range of 40-400 °C. Room temperature conductivity was enhanced as a result of doping. The existence of two activation energies, one in the ferroelectric phase (0.61 eV) and another in the paraelectric phase (0.77 eV) in the results, were revealed. The increase in conductivity due to doping is attributed to the generation of charge carriers due to double doping and the existence of two activation energies is attributed to the structural changes taking place at the ferroelectric transition temperature.     

Na1−xLixNbO3 ceramics studied by X-ray diffraction, dielectric, pyroelectric, piezoelectric and Raman spectroscopy

Na_1−xLi_xNbO₃ ceramics with composition 0.05≤x≤0.30 were prepared by solid-state reaction method and sintered in the temperature range 1100-1150 °C. These ceramics were characterised by X-ray diffraction as well as dielectric permittivity measurements and Raman spectroscopy. Dielectric properties of ceramics belonging to the whole composition domain were investigated in a broad range of temperatures from 300 to 750 K and frequencies from 0.1 to 200 kHz. The Rietveld refinement powder X-ray diffraction analysis showed that these ceramics have a single phase of perovskite structure with orthorhombic symmetry for x≤0.15 and two phases coexistence of rhombohedral and orthorhombic above x=0.20. The evolution of the permittivity as a function of temperature and frequency showed that these ceramics Na_1−xLi_xNbO₃ with composition 0.05≤x≤0.15 present the classical ferroelectric character and the phase transition temperature T_C increases as x content increases. The polarisation state was checked by pyroelectric and piezoelectric measurements. For x=0.05, the piezoelectric coefficient d₃₁ is of 2pC/N. The evolution of the Raman spectra was studied as a function of temperatures and compositions. The results of the Raman spectroscopy study confirm our dielectric measurements, and they indicate clearly the transition from the polar ferroelectric phase to the non-polar paraelectric one.     

Dielectric relaxation of CdSe nanoparticles

Nanoparticles of cadmium selenide (CdSe) have been synthesized by soft chemical route using mercaptoethanol as a capping agent. X-ray diffraction and transmission electron microscope measurements show that the prepared sample belongs to sphalerite structure with the average particle size of 25 nm. The band gap of the material is found to be 2.1 eV. The photoluminescence (PL) emission spectra of the sample are measured at various excitation wavelengths. The PL spectra appear in the visible region, and the emission feature depends on the wavelength of the excitation. Impedance spectroscopy is applied to investigate the dielectric relaxation of the sample in a temperature range from 323 to 473 K and in a frequency range from 42 Hz to 1.1 MHz. The complex impedance plane plot has been analyzed by an equivalent circuit consisting of two serially connected R-CPE units, each containing a resistance (R) and a constant phase element (CPE). The dielectric relaxation of the sample is investigated in the electric modulus formalism. The temperature dependent relaxation times obey the Arrhenius law. The Havriliak–Negami model is used to investigate the dielectric relaxation mechanism in the sample. The frequency dependent conductivity spectra are found to obey the power law.