Unusual sulfanylation through ring transformation of arene-tethered 2H-pyran-2-ones by in situ built Michael adduct

A novel synthesis of highly functionalized alkylsulfanylmethyl arenes 8a-m through the ring transformation of 6-aryl-4-methyl/ethylsulfanyl-2H-pyran-2-one-3-carbonitriles 1a-j, by reaction with methyl vinyl ketone 2, is delineated and illustrated. To ascertain the course of reaction, 3-arylsulfanylmethyl-2-methyl-6-methylsulfanyl-4-phenylbenzonitriles 8k-m were also prepared from the reaction of 1 with 4-arylsulfanyl-butan-2-ones 7c,d.     

The conversion of 2-cyano cyanothioformanilides into 3-aminoindole-2-carbonitriles using triphenylphosphine

2-Cyano cyanothioformanilide 3a reacts with triphenylphosphine in the presence of water to give 2-(cyanomethyleneamino)benzonitrile 4a, 2-(cyanomethylamino)benzonitrile 5, 3-aminoindole-2-carbonitrile 2a and (2-cyanoindol-3-yl)iminotriphenylphosphorane 6a. In the presence of p-toluenesulfonic acid in MeOH the reaction between 2-cyano cyanothioformanilide 3a and triphenylphosphine (2 equiv) gives 3-aminoindole-2-carbonitrile 2a in 90% yield. Under the same conditions 2-(cyanomethyleneamino)benzonitrile 4a gives anthranilonitrile 8a, 3-aminoindole-2-carbonitrile 2a and N-(2-cyanophenyl)formamide 9. In addition, substituted 2-cyano cyanothioformanilides 3b-f react with triphenylphosphine and p-toluenesulfonic acid in MeOH to give 3-aminoindole-2-carbonitriles 2b-f in 63-75% yields. Under analogous conditions 2-cyano-4,5-dimethoxyphenyl cyanothioformanilide 2g gives only 4,5-dimethoxyanthranilonitrile 8g and 4,6,7-trimethoxyquinazoline-2-carbonitrile 14g, but in refluxing dry PhMe in the absence of p-toluenesulfonic acid 2-cyano-4,5-dimethoxyphenyl cyanothioformanilide 3g, (2-cyano-5,6-dimethoxyindol-3-yl)iminotriphenylphosphorane 6g and 2-(cyanomethyleneamino)-4,5-dimethoxybenzonitrile 4g are obtained. The structure of 2-(cyanomethyleneamino)-4,5-dimethoxybenzonitrile 4g is supported unambiguously via independent synthesis and comparison to the isomeric 6,7-dimethoxyquinazoline-2-carbonitrile 15. All new compounds are fully characterised and a tentative mechanism for the transformation of 2-cyano cyanothioformanilides to indoles is proposed.     

Cycloaddition of methyl 2-(2,6-dichorophenyl)-2H-azirine-3-carboxylate to electron-rich 2-azadienes

tert-Butyldimethylsililoxy-2-aza-1,3-butadienes react with 2H-azirine 3 leading to Diels-Alder cycloadducts in moderate yields. The reactions are endo- and regioselective with the azirine being added by its less hindered face. There is only one product in the case of 1b, 4b. There are two isomers (4 and 5) from 1a, 1c and 1d. A different result was obtained with the diene 1e. Diene 1e formed products 4e and 8. Some of compounds 4 and 5 have been hydrolysed leading to functionalised aziridines 7. Compound 8 gave aziridine 9.     

A simple synthesis of 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles

A simple four-step synthesis of 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles 8 (or their 1H-pyrazol-3(2H)-one tautomers 8′) as the pyrazole analogues of histamine was developed. First, enamino lactam 3 was prepared as the key intermediate in two steps from 2-pyrrolidinone (1). Next, acid-catalysed ‘ring switching’ transformations of 3 with monosubstituted hydrazines 4 gave N-[(1-substituted 5-hydroxy-1H-pyrazol-4-yl)ethyl]benzamides 7a-k and N-[2-(2-heteroaryl-3-oxo-2,3-dihydro-1H-pyrazol-4-yl)ethyl]benzamides 7′l-o. Benzamides 7a-k and 7′l-o were finally hydrolysed by heating in 6 M hydrochloric acid to furnish 1-substituted 4-(2-aminoethyl)-5-hydroxy-1H-pyrazoles 8a-k and 4-(2-aminoethyl)-2-heteroaryl-1H-pyrazol-3(2H)-ones 8′l-o in good overall yields.     

A novel synthesis of 2-arylhydrazono-6-amino-4-arylbenzene-1,3-dicarbonitriles and their conversion into phthalazines

Compounds 1a-d react with benzylidenemalononitrile 2 to yield dihydroaminopyridazines 3a-d and, in contrast, compounds 1e,f react with 2 under the same conditions to yield aminobenzenedicarbonitriles 8e,f compound 8e underwent intramolecular cyclization to phthalazine 9e. Compound 10e reacted with 2a to yield 11e.     

Diels-Alder cycloaddition of 2-azadienes to methyl 2-(2,6-dichlorophenyl)-2H-azirine-3-carboxylate in the synthesis of methyl 4-oxo-1,3-diazabicyclo[4.1.0]heptane-6-carboxylates

A number of fused 4-oxo-1,3-diazabicyclo[4.1.0]heptane-6-carboxylates, a new type of compound, have been obtained by Diels-Alder cycloaddition between nucleophilic 2-azadienes and an electrophilic 2H-azirine. The reactions are completely endo- and regioselective, the azirine being added by its less hindered face to the diene. There are two isomers 7 and 8 formed from dienes 1 due either to isomerization of the cycloadducts 7 and 8 or by isomerization of the CN bond of the diene during the reaction. The isomer 10 is formed from diene 2e, and a single diastereoisomer structure 4a-i is formed from dienes 11. Some pyrimidones 8a, 7c/8c, 7e, 10, 11d have been hydrolyzed leading to functionalised aziridines 12, 13 and 15.     

Formation of 3,4-dimethyl-2-pyrones from allene carboxylates and 2-silyloxydienes via 3-carboethoxyethylidene cyclobutanols

The 3-carboethoxyethylidene cyclobutanols 4 are prepared in two steps via [2+2] cycloaddition of the 2-silyloxydienes 1 and the allene carboxylate 2 followed by acidic hydrolysis. Treatment of these cyclobutanols 4 with various bases affords good yields of the substituted 3,4-dimethyl-2-pyrones 6. The proposed mechanism involves ring opening of the metal alkoxide 7 to give the carbanion 8, which undergoes proton transfer to give the more stable carbanion 9 and double bond isomerization to give the enolate 10, which then forms the pyrone ring 6 via attack on the ester via 11.     

Synthesis of polyfunctionalized furans from 3-acetyl-1-aryl-2-pentene-1,4-diones

The BF₃-catalyzed cyclization of 3-acetyl-1-aryl-2-pentene-1,4-diones 1a-e in the presence of water in boiling tetrahydrofuran gave bis(3-acetyl-5-aryl-2-furyl)methanes 2a-e in 26-79% yields along with a small amount of 3-acetyl-5-aryl-2-methylfurans 3a-e. The exact structure of 2a was determined by X-ray crystallography. The use of a half volume of the solvent for the reaction of 1a resulted in the formation of 2,4-bis(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-phenylfuran (4) together with 2a and 3a. A similar reaction of 1a was carried out in the presence of 3-acetyl-5-(4-methylphenyl)-2-methylfuran (3d) to afford 4-(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-(4-methylphenyl)-2-methylfuran (5) in 49% yield. The BF₃-catalyzed reaction of 1a with 2,4-pentanedione in dry tetrahydrofuran at 23°C gave 3-(3-acetyl-5-phenyl-2-furfuryl)-4-hydroxy-3-penten-2-one (6a) and 3-(3-acetyl-2-methyl-4-phenyl-5-furyl)-4-hydroxy-3-penten-2-one (7a) in 66 and 24% yields, respectively. The product distribution depended on the reaction temperature. A similar reaction of 1b-e also yielded the corresponding trisubstituted furans 6b-e and tetrasubstituted furans 7b-e in good yields. These results suggested the presence of the furfuryl carbocation intermediate A during the reaction. The one-pot synthesis of 6a and 7a was also achieved by a similar reaction using phenylglyoxal. The deoxygenation of 1a with triphenylphosphine gave 3a in 88% yield, while 1a was treated with concentrated hydrochloric acid to yield 3-acetyl-2-chloromethyl-5-phenylfuran (8) which was quantitatively transformed in ethanol into 3-acetyl-2-ethoxymethyl-5-phenylfuran (9) and in water into 3-acetyl-5-phenylfurfuryl alcohol (10), respectively. In addition, the Diels-Alder reaction of cyclopantadiene with 1a gave the corresponding [4+2] cycloaddition products 11 and 12.     

Electrochemical fluorination of several esters derived from oxolane-2-yl-carboxylic acid, oxolane-2-yl-methanol and oxane-2-yl-methanol

Electrochemical fluorination (ECF) of the ester derivatives of oxolane-2-yl-carboxylic acid (1), oxolane-2-yl-methanol (2) and oxane-2-yl-methanol (3) were investigated. Perfluoro(oxolane-2-yl-carbonylfluoride) (4) was obtained from derivatives of 1 and 2, and perfluoro(oxane-2-yl-carbonylfluoride) (5) was obtained from derivatives of 3 as the desired compounds, respectively. From the ECF of acetates of 2 and 3, perfluorospiroethers having a dioxolane ring were also obtained as the cyclization product in low yield together with the desired perfluoroacid fluoride (4 and 5). The structure of these perfluorospiroethers was confirmed by analyzing the chlorinated products, which were obtained by the reaction with AlCl₃.     

A convenient synthesis of substituted 2,2′:6′,2″-terpyridines

The 2,2′:6′,2″-terpyridines 7a-c were prepared in good yield by reacting α-acetoxy-α-chloro-β-keto-esters 3a-c with bis-amidrazone 4 and 2,5-norbornadiene 6 in ethanol at reflux. Compounds 3a and 3b gave the 2,2′:6′,2″-terpyridines 9a and 9b, respectively, in moderate yield when treated with compound 4 and enamine 8.     

Reactions of 4-substituted 5H-1,2,3-dithiazoles with primary and secondary amines: fast and convenient synthesis of 1,2,5-thiadiazoles, 2-iminothioacetamides and 2-oxoacetamides

The treatment of 5H-1,2,3-dithiazole-5-thiones 1 in chloroform under reflux and 5H-1,2,3-dithiazol-5-ones 2 in THF at room temperature with primary aliphatic amines and benzylamine afforded 1,2,5-thiadiazole-3(2H)-thiones 3 and 1,2,5-thiadiazol-3(2H)-ones 6, respectively. The structure of dithiazolone 3f was confirmed by X-ray diffraction analysis. The reaction of dithiazolone 2e bearing an electron-donating methyl group in the 4-position gave 2-oxoacetamide 7e in high yield. The reaction of thiones 1 with secondary aliphatic amines in DMSO yielded 2-iminothioacetamides 8 in moderate yields together with elemental sulfur. Interestingly, the treatment of dithiazolones 2 with secondary amines under the same conditions afforded 2-oxoacetamides 9—the products of the hydrolysis of corresponding imino derivatives 10, which was isolated as 10b. A general mechanism was proposed for the formation of the products.     

(Fluorosilyl)ethylenediamines and fluorosilyl-1,3-diaza-2-silacyclopentanes

This paper presents the chemistry of ethylenediamines and fluorosilanes. The synthesis of thermally stable monosilyl (1-5)- and bis(fluorosilyl)ethylenediamines (6) is described. Starting with the dilithium salt of ethylenediamine and F₂Si(CMe₃)₂ the five-membered 1,3-diaza-2-silacyclopentane (8) is obtained. The reaction of tetra- and trifluorosilanes with dilithiated bis(silyl)ethylenediamines leads to the formation of 1,3-diaza-2-fluorosilylsilacyclopentanes (9-14). Fluorosilanes substitute 8 in 1 and 3 positions (15-28). A fluorosilyl-bridged five-membered ring (29) is isolated in the reaction of 1-trimethylsilyl-1,3-diaza-2-silacyclopentane, BuLi and MeSiF₃. In the synthesis of N-fluorosilyl-1,3-diaza-2-silacyclopentanes constitutional isomers were formed (30-33). Quantum-chemical calculations support the isomerisation mechanism. An iminosilane with an SiN double bond is the intermediate product of the rearrangement process.Crystal structures of 7, 13, 20 and 23 are reported.     

Regioselective synthesis of 4- and 5-oxazole-phosphine oxides and -phosphonates from 2H-azirines and acyl chlorides

A simple and efficient regioselective synthesis of 4-oxazole-phosphine oxides 11 and -phosphonates 12 from 2H-azirine-phosphine oxides 1 and -phosphonates 6 is described. The key step for the synthesis of oxazoles 11 is a base-mediated ring closure of vinylogous α-aminophosphorus compounds derived from phosphine oxides 4 and from phosphonates 8. These derivatives 4 and 8 are obtained by reaction of functionalized azirines 1 and 6 with acyl chlorides 2 and subsequent acid-catalyzed ring opening of N-acylaziridine-phosphine oxides 3 and -phosphonates 7. Regioselective thermal ring cleavage of N-acylaziridine-phosphine oxides 3 leads α-chloro-β-(N-acylamido)-phosphine oxides 13 and their treatment with bases gives 5-oxazole-phosphine oxides 16.     

Microwave-assisted synthesis of novel bis(2-thioxothiazolidin-4-one) derivatives as potential GSK-3 inhibitors

(5Z,5′Z)-3,3′-(1,4-Phenylenebis(methylene)-bis-(5-arylidene-2-thioxothiazolidin-4-one) derivatives (5a-r) have been synthesized by the condensation reaction of 3,3′-(1,4- or 1,3-phenylenebis(methylene))bis(2-thioxothiazolidin-4-ones) (3a,b) with suitably substituted aldehydes (4a-f) or 2-(1H-indol-3-yl)2-oxoacetaldehydes (8a-c) under microwave conditions. The bis(2-thioxothiazolidin-4-ones) were prepared from the corresponding primary alkyl amines (1a,b) and di-(carboxymethyl)-trithiocarbonyl (2). The 2-(1H-indol-3-yl)-2-oxoacetaldehydes (8a-c) were synthesized from the corresponding acid chlorides (7a-c) using HSnBu₃.     

Design and synthesis of boron containing 2,4-disubstituted-phthalazin-1(2H)-one and 3,7-disubstituted-2H-benzo[b][1,4] oxazine derivatives as potential HGF-mimetic agents

We synthesized boron containing 2-(4-methoxybenzyl)-4-(4-(4,4,5,5-tetramethyl-1,3,2-dioaborolan-2-yl)phenyl) phthalazin-1(2H)-one 3 and 7-methyl-3-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)-2H-benzo[b][1,4] oxazine 8. The reaction of compound 2 with B₂pin₂ using potassium acetate as the base and Pd(PPh₃)₂Cl₂ as the catalyst, produced the corresponding boron-containing derivative 3 as a white solid in 65% yield. Alternatively, we have synthesized compound 8 as a yellow solid in 59% yield using the Miyaura borylation reaction. The potassium trifluoro(4-(-methyl-2H-benzo[b][1,4]oxazine-3-yl)phenylborate 9 was then obtained after treatment of 8 with aqueous solution of KF₂H in methanol as white solid product in 60% yield. The biological activities of the synthetic compounds are currently being evaluated.     

1,2,5-Thiadiazole 2-oxides: selective synthesis,structural characterization,and electrochemical properties

A new general procedure for the selective synthesis of 1,2,5-thiadiazole 2-oxides (including fused derivatives) 8a,b,c,g,h from the reaction of vic-glyoximes with S₂Cl₂ and pyridine in acetonitrile was elaborated together with general procedure for the synthesis of 1,2,5-thiadiazoles 7a–i, 10, 12, and 14 from the same starting materials and reagents. Molecular structures of 3,4-dimethyl-1,2,5-thiadiazole 2-oxide 8a and [1,2,5]thiadiazolo[3,4-b]quinoxaline 10 were confirmed by single-crystal X-ray diffraction. Electrochemical properties of 1,2,5-thiadiazole 2-oxides 8 were studied by cyclic voltammetry and different behavior was observed for monocyclic and benzo-fused derivatives. With compounds 8g and 17, previously unknown deoxygenation of 2,1,3-benzothiadiazole 1-oxides was discovered by electrochemical reduction, and resulted 2,1,3-benzothiadiazoles 7g and 19 were detected in the forms of their radical anions by EPR spectroscopy combined with DFT calculations.     

Addition of 2-tert-butyldimethylsilyloxythiophene to activated quinones: an approach to thia analogues of kalafungin

The uncatalyzed reaction of 2-tert-butyldimethylsilyloxythiophene 2 with 1,4-quinones bearing either an electron withdrawing acetyl or a carbomethoxy group at C-2, was investigated. No reaction was observed using 1,4-quinones 8 and 9 bearing an ester group at C-2 whereas use of 1,4-quinones 10 and 11 bearing an acetyl group at C-2 only provided low yields of the silyloxythiophenes 15 and 16 resulting from electrophilic substitution of the silyloxythiophene by the 1,4-quinone. Use of the Lewis acids InCl₃, Cu(OTf)₂ and BF₃·Et₂O were investigated in an effort to improve the yield of the desired annulation reaction. BF₃·Et₂O proved to be the optimum catalyst for the synthesis of thiolactone naphthofuran adducts 14 and 18 from 1,4-naphthoquinones 9 and 11, respectively. Reaction of 2-tert-butyldimethylsilyloxythiophene 2 with 1,4-benzoquinones 8 and 10 bearing a carbomethoxy or an acetyl group at C-2, respectively, afforded thiolactone benzofuran adducts 13 and 17, respectively, catalyzed by either InCl₃ or Cu(OTf)₂. Addition of 2-tert-butyldimethylsilyloxythiophene 2 to 3-acetyl-5-methoxy-1,4-naphthoquinone 12 afforded adduct 19 that underwent oxidative rearrangement to thiolactone pyranonaphthoquinone 20 using ceric ammonium nitrate in acetonitrile, thus providing a novel approach for the synthesis of a thia analogue of the pyranonaphthoquinone antibiotic kalafungin.     

Unexpected dimerization during hydrogenation of 2-(2-pyridylmethylene)-3(2H)-benzofuran-3-ones

Palladium catalyzed hydrogenation of 2-(2-pyridylmethylene)-3(2H)-benzofuran-3-ones (1-3) gave besides the expected 2,α-dihydro products 8-10 pentacyclic dimers formed by an attack of a semihydrogenated species on the substrate.     

Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

Non-C2-symmetrical antimony-phosphorus ligand, (R/S)-2-diphenylphosphano-2′-di(p-tolyl)stibano-1,1′-binaphthyl (BINAPSb): preparation and its use for asymmetric reactions as a chiral auxiliary

A new non-C₂-symmetrical antimony-phosphorous ligand, (±)-2-diphenyl-phosphano-2′-di(p-tolyl)stibano-1,1′-binaphthyl (BINAPSb) 3, has been prepared from 2-bromo-2′-diphenylphosphano-1,1′-naphthyl 4 via its borane complex 6, and could be resolved by the separation of a mixture of the diastereomeric palladium complexes 8A and 8B derived from the reaction of (±)-3 with optically active palladium reagent (S)-7. The enantiomerically pure BINAPSb 3 has proved to be highly effective in the palladium-catalyzed asymmetric hydrosilylation of styrene as a chiral auxiliary.