Novel electrosynthesis of metallic bis(trifluoromethanesulfonyl) imides

The preparation of a series of bis(trifluoromethanesulfonyl) imide salts of various metals was effected in good yields, under clean, mild and anhydrous conditions, by using a simple electrochemical methodology.     

Synthesis and characterization of sodium bis(trimethylstannyl) amide and bis(trimethylsilyl) bis(trimethylstannyl) -phospha-tetrazene

Sodium bis(trimethylstannyl)amide NaN(SnMe₃)₂, isolated by the reaction of trimethylstannyldiethylamine with sodium amide, reacts with tris(trimethylsilyl)hydrazino—dichloro-phosphine to form bis(trimethylsilyl)bis(trimethylstannyl)-2-phospha-2-tetrazene, (Me₃Si)₂N-N=P-N(SnMe₃)₂. Both the molecules have been isolated and characterized.     

Lanthanide bis(trifluoromethanesulfonyl)amides, synthesis, characterization and catalytic activity

The synthesis of lanthanum, neodymium and ytterbium bis(trifluoromethanesulfonyl)amides, named triflimidates, from acetates, carbonates and oxides is investigated. When the synthesis is performed in water, all the salts contain one molecule of water and the lanthanum and neodymium salts synthesized from the acetates also contain one molecule of acetic acid. After removal of the water and acetic acid in refluxing ethanol, the salts are obtained anhydrous but associated for lanthanum and neodymium, whereas the ytterbium salt is monomeric and volatile. When the synthesis is performed directly in ethanol, the neodymium salt contains two molecules of coordinated ethanol.In non-hazardous solvents, these triflimidates are better catalysts than the analogous triflates toward either Friedel-Crafts acylations, or Fries transpositions or Baeyer-Villiger oxidations. Unexpectedly, the cerium(IV) triflimidate catalyzes the oxidation of aromatic ketones to give the corresponding acids.     

Infrared spectra of bis(trifluoromethanesulfonyl)imide based ionic liquids: Experiments and DFT simulations

We measured the far- and mid-infrared spectra of three ionic liquids having bis(trifluoromethanesulfonyl)imide anions and three different cations of the families of pyrrolidinium and ammmonium ions. The molecular vibrations of the individual ions were calculated by means of DFT theory at the B3LYP/6-31G** level: we found good agreement between the experimental and the computed frequencies. The infrared lines are ascribable to molecular vibrations of the single ions, suggesting an extremely weak interaction between anions and cations. The spectral lines found experimentally between 760 and 1050 cm⁻¹ are fingerprints for different cations. The comparison with the calculated frequencies allows the assignment of the experimental spectral lines to specific molecular vibrations of anions and for the first time of the specific cations of the measured ionic liquids.     

Synthesis and characterization of poly(thioether ether sulfone imide)s derived from isomeric bis(chlorophthalimide)s and bis(4-mercaptophenyl) sulfone

A series of isomeric bis(chlorophthalimide)s (BCPIs) were conveniently prepared from 3-chlorophthalic anhydride, 4-chlorophthalic anhydride, and mixtures thereof. Polymerization of BCPIs with bis(4-mercaptophenyl) sulfone (BMPS) proceeded smoothly in the presence of tributylamine, from which a class of isomeric poly(thioether ether sulfone imide)s (PTESIs) with inherent viscosities of 0.45-0.82 dL/g were obtained. The solubility, thermal stability, and mechanical properties of these polymers were characterized. Compared to the PTESIs derived from single BCPIs, i.e., 3,3′-, 3,4′-, or 4,4′-BCPIs, the PTESIs derived from mixed BCPIs showed better solubility and higher storage modulus. These PTESIs also demonstrated good thermal stability, giving only 5% weight loss at temperature of 490 °C in nitrogen atmosphere. The glass transition temperatures (T_gs) of these isomeric PTESIs were between 242 and 265 °C, and were increased with increasing of the ratio of 3-chlorophthalimide unit in the polymer backbone.     

双(三氟甲基磺酰)亚胺钠基聚合物电解质在固态钠电池中的性能

采用简单的溶液浇铸法制备出由双（三氟甲基磺酰）亚胺钠（NaTFSI）/聚氧乙烯（PEO）构筑的固态聚合物电解质（SPE）,并针对其相转变、结晶性、热稳定性、电导率以及电化学稳定性等基础理化及电化学性质进行了系统表征。结果表明,NaTFSI/PEO（[EO]/[Na⁺]=15）SPE具有相对高的电导率（σ ≈ 10^-3 S·cm^-1,80℃）、高的耐氧化能力（4.86 V vs Na⁺/Na）和热稳定性高达350℃。电池测试结果表明,该NaTFSI基SPE不仅对金属钠电极能够呈现出优异的界面稳定性,而且在Na|SPE|NaCu_1/9Ni_2/9Fe_1/3Mn_1/3O₂电池中展现出良好的循环和倍率性能。     

Synthesis and properties of bis(heteroazulen-3-yl)methyl cations and bis(heteroazulen-3-yl)ketones

The synthesis and properties of a novel type of bis(heteroazulen-3-yl)methyl cations, bis(2-oxo-2H-cyclohepta[b]furan-3-yl)methyl cation salt and nitrogen analogues, (9a-c·PF₆⁻) and (9a-c·BF₄⁻), as well as bis(heteroazulen-3-yl)ketones (12a-d) are studied. The synthetic method was based on a TFA-catalyzed electrophilic aromatic substitution on the heteroazulenes (6a-d) with paraformaldehyde to afford the corresponding disubstituted methane derivatives 7a-d, followed by oxidative hydrogen abstraction with DDQ, and subsequent exchange of the counter-anion by using aq. HPF₆ or aq. HBF₄. In addition, the reaction of 7a-d with 2.2 equiv. amounts of DDQ afforded carbonyl compounds 12a-d. The delocalization of the positive charge of 9a-c was evaluated by the ¹H and ¹³C NMR spectral data. The thermodynamic stability of cations 9a-c was evaluated to be in the order 9a<9b<9c on the basis of their reduction potentials measured by cyclic voltammetry (CV) and pK_R+ values (2.6-10.3) obtained spectrophotometrically. The reduction waves of cations 9a-c were irreversible, suggesting the dimerization of the radical species generated by one-electron reduction. This was demonstrated by the reduction of 9a·BF₄⁻ with Zn powder to give dimerized product 14a. In addition, the quenching of 9a·BF₄⁻ with MeOH/NaHCO₃ gives ether derivative 15a, which is proposed for the precursor for synthesizing tris(heteroazulene)-substituted methyl cations bearing two different heteroazulene-units.     

F-alkylation of bis(allyl) polyoxyethylene ethers

Bis(3-F-alkylallyl) polyoxyethylene ethers were obtained via radical addition of F-alkyl iodides on bis(allyl) ethers CH₂CH(CH₂OCH₂)_nCHCH₂ followed by 1,8-diazabicyclo[5.4.0]undec-7-ne (DBU) dehydrohalogenation.     

A Detailed Study of the (Electro)chemical Behavior of Bis(trifluoromethanesulfonyl)imide Based Ionic Liquids at Different Purification Steps

A systematic investigation of the major impurities content as well as of their effect on the electrochemical behavior of synthesized N‐butyl‐N‐methylpyrrolidinium (Py_1.4), N‐(2‐methoxyethyl)‐N‐methylpyrrolidinium (Py_1.102) and 1‐butyl‐3‐methylimidazolium (bmim) bis(trifluoromethanesulfonyl)imide has been carried out and the efficacy of an optimized multistep purification protocol for obtaining ILs suitable for electrochemical applications has been verified.     

Kristall- und Molekülstruktur von Bis(pyridin)bis(trifluoromethyl)zink

Crystal and Molecular Structure of Bis(pyridine)bis(trifluoromethyl)zinc Bis(pyridin)bis(trifluoromethyl)zinc 1 has been isolated and characterized by means of single-crystal X-ray diffraction techniques. The title compound represents the first structure determination of a fully fluorinated alkylzinc compound (monoclinic, space group P2₁/c, Z = 4, a = 8.856(3), b = 18.158(3), c = 8.979(3) Å, β = 98.14(2)°, R = 0.054, R_w = 0.035). The zinc atom is in a distorted tetrahedral environment. The molecular structure of [ClZn(CCl₂CF₃) η₂O]₂ 2 was solved, but is not included in a structural comparison due to crystallographic disorder.     

Simple non-empirical calculations of the zero-field splitting in bis(aquo) bis(malonato) nickel(II)

Summary A simple non-empirical method is applied to calculate the splittings of the ground state triplet, caused by the spin-orbit coupling, in bis(aquo) bis(malonato) nickel(II), allowing for a certain geometry variation. The calculations yield splittings on the order of 10–20 cm^–1. The comparison of exact (within model) and second-order perturbation theory calculations indicate that the spin Hamiltonian formalism is valid. The implications of the results for the theory of nuclear spin relaxation in paramagnetic complexes in solution are discussed.     

Improved Protocol for Mononitration of Phenols with Bismuth(III) and Iron(III) Nitrates

A simple and efficient multigram procedure was developed for the selective mononitration of various activated phenols. The reaction proceeded smoothly with 0.5 equivalents of Bi(NO₃)₃ · 5H₂O or Fe(NO₃)₃ · 9H₂O in acetone at ambient temperature or at reflux. The desired products were isolated in 62–93% total yield and essentially no overnitrated compounds were detected.     

Rhodium(I) carbonyl complexes of mono selenium functionalized bis(diphenylphosphino)methane and bis(diphenylphosphino)amine chelating ligands and their catalytic carbonylation activity

The chelate complexes of the types (1) and (2) have been synthesized and characterized by IR and NMR spectroscopy. The lower shift of the ν(P-Se) bands and downfield shift of the ³¹P-{¹H}NMR signals for both P(III) and P(V) atoms in 1 and 2 compared to the corresponding free ligands indicate chelate formation through selenium donor. 1 and 2 show terminal ν(CO) bands at 1977 and 1981 cm⁻¹, respectively, suggesting high electron density at the metal center. The molecular structure of 2 has been determined by single-crystal X-ray diffraction. The rhodium atom is at the center of a square planar geometry having the phosphorus and selenium atoms of the chelating ligand at cis-position, one carbonyl group trans- to selenium and one chlorine atom trans- to phosphorus atom. 1 and 2 undergo oxidative addition (OA) reaction with CH₃I to produce acyl complexes (3) and (4), respectively. The kinetics of the OA reactions reveal that 1 undergoes faster reaction by about 4.5 times than 2. The catalytic activity of 1 and 2 in carbonylation of methanol was higher than that of the well known species [Rh(CO)₂I₂]⁻ and 2 shows higher catalytic activity compared to 1.     

Photocatalytic degradation of chloroform by bis (bipyridine)dichlororuthenium(III/II)

Broadband (λ > 320 nm) irradiation of chloroform solutions of either [Ru(bpy)₂Cl₂] or [Ru(bpy)₂Cl₂]Cl exposed to air led to a photostationary state, in which [Ru(bpy)₂Cl₂]⁺ predominated, and to the continuous decomposition of CHCl₃, as evidenced by the accumulation of HCl, hydroperoxides (CCl₃OOH and CHCl₂OOH), and tetra-, penta-, and hexachloroethane. The addition of Cl^? increased the rate of photodecomposition, while the replacement of Cl^? by F^? greatly decreased the rate. The observations are consistent with a photocatalytic cycle in which [Ru(bpy)₂Cl₂]⁺ is photochemically reduced to [Ru(bpy)₂Cl₂], which is thermally reoxidized by CCl₃OO or CCl₃OOH. In the absence of air a much slower photodecomposition reaction takes place leading to continuously increasing concentrations of chloroethanes. The data are consistent with a catalytic cycle in which [Ru(bpy)₂Cl₂]⁺ is photoreduced, as in aerated solutions, while [Ru(bpy)₂Cl₂] is photooxidized with chloroform as the substrate.     

Les Sels de Bismuth (III) Comme Catalyseurs Dans la Reaction D'ouverture Des Epoxydes Par Les Amines

BiCl 3 and Bi (OTf) 3 catalyze the opening of epoxides ( 1-7 ) by amines ( 8-12 ). High regioselectivities are observed. BiCl 3 et Bi (OTf) 3 catalysent la réaction d'ouverture des époxydes ( 1-7 ) par les amines ( 8-12 ). La réaction est fortement régiosélective.     

Le Triflate de Bismuth(III) Comme Catalyseur Dans la Reaction de Carbonyl-Diels-Alder

In presence of bismuth(III) triflate, a carbonylated electrophile (ethyl mesoxalate or glyoxylate) and usual diene led selectively (60-100) the hetero carbonyl-Diels-Alder reaction with the ene reaction product. Bi(OTf) 3 exhibits strong catalytic activity and reacts under mild conditions. En présence de triflate de bismuth(III) le mésoxalate et le glyoxylate d'éthyle réagissent avec des diènes usuels pour donner un mélange de carbonyl-Diels-Alder et du produit de la ène réaction. Bi(OTf) 3 présente une forte activité catalytique et réagit dans des conditions douces.     

Effective chemoselective deprotection of 3,4-dimethoxybenzyl (DMB) ethers in the presence of benzyl and p-methoxybenzyl (PMB) ethers by phenyliodine(III) bis(trifluoroacetate) (PIFA)

In this Letter, a selective deprotection of the alcohol protecting 3,4-dimethoxybenzyl (^3,4DMB) group is described. The hypervalent iodine(III) reagent phenyliodine bis(trifluoroacetate) (PIFA) is found to be an efficient reagent for the chemoselective deprotection of ^3,4DMB ethers in the presence of benzyl, p-methoxybenzyl, methoxymethyl, tert-butyldimethylsilyl, and tert-butyldiphenylsilyl ethers under mild conditions. This is the first example of the selective deprotection of the ^3,4DMB group from a hydroxy group with PIFA.     

Synthesis and characterization of aromatic poly(ether sulfone imide)s derived from sulfonyl bis(ether anhydride)s and aromatic diamines

Two sulfonyl group-containing bis(ether anhydride)s, 4,4′-[sulfonylbis(1,4-phenylene)dioxy]diphthalic anhydride ( IV ) and 4,4′-[sulfonylbis(2,6-dimethyl-1,4-phenylene)dioxy]diphthalic anhydride (Me- IV ), were prepared in three steps starting from the nucleophilic nitrodisplacement reaction of the bisphenolate ions of 4,4′-sulfonyldiphenol and 4,4′-sulfonylbis(2,6-dimethylphenol) with 4-nitrophthalonitrile in N,N-dimethylformamide (DMF). High-molar-mass aromatic poly(ether sulfone imide)s were synthesized via a conventional two-stage procedure from the bis(ether anhydride)s and various aromatic diamines. The inherent viscosities of the intermediate poly(ether sulfone amic acid)s were in the ranges of 0.30–0.47 dL/g for those from IV and 0.64–1.34 dL/g for those from Me- IV. After thermal imidization, the resulting two series of poly(ether sulfone imide)s had inherent viscosities of 0.25–0.49 and 0.39–1.19 dL/g, respectively. Most of the polyimides showed distinct glass transitions on their differential scanning calorimetry (DSC) curves, and their glass transition temperatures (T_g) were recorded between 223–253 and 252–288°C, respectively. The results of thermogravimetry (TG) revealed that all the poly(ether sulfone imide)s showed no significant weight loss before 400°C. The methyl-substituted polymers showed higher T_g's but lower initial decomposition temperatures and less solubility compared to the corresponding unsubstituted polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1649–1656, 1998     

Eu(NTf2)3催化吲哚与醛(酮)反应合成二吲哚基甲烷

二(三氟甲基磺酰)亚胺铕(III) [Eu(NTf₂)₃, Tf＝SO₂CF₃]作催化剂, 吲哚与醛(酮)在室温下发生亲电取代反应合成了一系列二吲哚基甲烷, 产率85%～98%. 该法反应条件温和、时间短、催化剂用量少且可以回收重复使用.     

Fluorinated phosphorus compounds: Part 7. The reactions of bis(fluoroalkyl) phosphorochloridates with nitrogen nucleophiles

Forty bis(fluoroalkyl) phosphoramidates (R_FO)₂P(O)R were prepared in 10-91% yield by treating phosphorochloridates (R_FO)₂P(O)Cl where R_F was HCF₂CH₂, HCF₂CF₂CH₂, HCF₂CF₂CF₂CF₂CH₂, CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, (CF₃)₂CH, (FCH₂)₂CH and (CH₃)₂CF₃C with nucleophiles HR, where R was NH₂, NHMe, NMe₂, NHEt and NEt₂ in diethyl ether at 0-5 °C. The bulky chloridate [(CH₃)₂CF₃CO]₂P(O)Cl reacted with ammonia, methylamine, dimethylamine and ethylamine, but not with diethylamine—even on heating in the presence of 4-dimethylaminopyridine—due to steric hindrance at phosphorus. Fluorinated phosphoramidates have lower basicity and nucleophilicity than their unfluorinated counterparts: (EtO)₂P(O)NH₂ is more easily hydrolysed by HCl than (CF₃CH₂O)₂P(O)NH₂ and whereas, (EtO)₂P(O)NH₂ is known to react with oxalyl chloride and thionyl chloride to give (EtO)₂P(O)NCO and (EtO)₂P(O)NSO respectively, (CF₃CH₂O)₂P(O)NH₂ reacted only with oxalyl chloride to give (CF₃CH₂O)₂P(O)NCO in 10% yield. Two other new fluorinated species, (CF₃CH₂O)₂P(O)NHOMe and (CF₃CH₂O)₂P(O)N₃, were prepared by nucleophilic substitution of bis(trifluoroethyl) phosphorochloridate with methoxyamine and azide ion.