Surface modification of carbon anodes for secondary lithium battery by fluorination

Recent results on the surface modification of petroleum cokes and their electrochemical properties as anodes of secondary lithium batteries are summarized. The surface of petroleum coke and those heat-treated at 1860-2800 °C were fluorinated by elemental fluorine (F₂), chlorine trifluoride (ClF₃) and nitrogen trifluoride (NF₃). No surface fluorine was found except only one sample when ClF₃ and NF₃ were used as fluorinating agents while surface region of petroleum coke was fluorinated when F₂ was used. Transmission electron microscopic (TEM) observation revealed that closed edge of graphitized petroleum coke was destroyed and opened by surface fluorination. Raman spectra showed that surface fluorination increased the surface disorder of petroleum cokes. Main effect of surface fluorination with F₂ is the increase in the first coulombic efficiencies of petroleum cokes graphitized at 2300-2800 °C by 12.1-18.2% at 60 mA/g and by 13.3-25.8% at 150 mA/g in 1 mol/dm³ LiClO₄-ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1, v/v). On the other hand, main effect of the fluorination with ClF₃ and NF₃ is the increase in the first discharge capacities of graphitized petroleum cokes by ∼63 mAh/g (∼29.5%) at 150 mA/g in 1 mol/dm³ LiClO₄-EC/DEC.     

Surface fluorination of the cathode active materials for lithium secondary battery

LiMn₂O₄ was treated with F₂ at room temperature (RT), 373 and 473 K under 1.3, 6.6 and 13.2 kPa-F₂. XPS data indicate that two kinds of fluorine species may exist on the sample surface and the ratio of these fluorines is affected by choosing the reaction condition. The peak indicating Mnⁿ⁺ bonded to fluorine appeared in the XPS spectra of Mn2p3/2 electron. From the results of the charge/discharge measurements, the efficiency of charge/discharge process for the sample fluorinated under 1.3, 6.6 and 13.2 kPa-F₂ below 373 K was larger than that of untreated one. The discharge capacity of the fluorinated sample was also larger than that of untreated one. The discharge capacity, the loss of discharge capacity during 50 charge/discharge cycles, F/O ratio measured from XPS data and the intensity of the peak indicating Mnⁿ⁺ bonded to fluorine in the XPS spectra were closely related to each other. The optimal fluorination condition was under 1.3 kPa-F₂ at RT for 1 h.     

Reactions of chlorofullerene C60Cl6 with N-substituted piperazines

It was shown for the first time that reactions of C₆₀ halides with aliphatic amines provide a facile route for the synthesis of aminofullerenes, valuable precursors for water-soluble cationic fullerene derivatives. Particularly, chlorofullerene C₆₀Cl₆ and N-substituted piperazines were investigated in this work. It was shown that substitution of chlorine atoms in C₆₀Cl₆ by amine groups is accompanied by partial elimination of addends from the fullerene cage that yields mixtures of di-, tetra- and, hexaaminofullerenes as the final products. Separation of these mixtures by column chromatography resulted in isolation of pure 1,4-diaminofullerenes; this procedure gives much higher and more reproducible yields of these compounds than direct oxidative photoaddition of secondary amines to C₆₀. ESI mass spectrometry and NMR spectroscopy data showed that hexaaminofullerene isomers are major components in inseparable mixtures of polyaddition products. Polyaminofullerenes were found to be readily soluble in aqueous acids; these solutions are unstable because of a facile substitution of protonated amine groups with hydroxyls. Nevertheless, the use of other amine substrates in the investigated reaction can potentially allow the preparation of more stable water-soluble cationic fullerene derivatives for biological studies.     

Removal of anionic and cationic dyes from wastewater by adsorption using multiwall carbon nanotubes

This paper evaluated the efficiency and reusability of multiwall carbon nanotubes (MWNTs) on removal of cationic and anionic dyes under effect of pH, dose of MWNTs and concentration of dyes. The characterization of MWNTs is characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), Raman spectra and BET (Brunauer, Emmett and Teller) surface area. SEM and TEM analyses showed that MWNTs had size within nano scale range of 10–50 nm. The experimental results indicated that the efficiency of removal of MWNTs increase under condition of normal pH, at contact time 60 min with agitation speed 240 rpm and initial concentration of dyes 10 mg/l. Under these optimal conditions, the removal reached 98.7% and 97.2% for anionic dyes and cationic dyes, respectively. For economic use, MWNTs can be used more than one time where the same experiments with the already used MWNTs was repeated and it was found that the percent removal is almost the same.     

Synthesis of water-soluble 2-alkylcyclodextrin-C60 conjugates and their inclusion complexation in aqueous solution

Two β-cyclodextrin-C₆₀ conjugates (3 and 4) with a flexible linker at the secondary face of cyclodextrin are synthesized by a single reaction of 2-(ω-azidoundecanyl)-2-O-heptakis (2,3,6-tri-O-methyl)-β-cyclodextrin (2) and C₆₀, both of which display satisfactory water solubility. Structural analyses show that 3 is a closed [5,6] aziridinofullerene, whereas 4 is a bis-adduct derivative. Using rhodamine B (RhB) as a guest molecule, the inclusion complexation behavior of 3 was investigated in aqueous solution.     

Stabilization of Film Morphology in Polymer‐Fullerene Heterojunction Solar Cells

Abstract

The fixation of film morphology is essential for the long‐term stability of heterojunction polymer photovoltaic (PV) cells. An epoxy‐functionalized fullerene C₆₀ derivative was synthesized for this purpose. This material can be polymerized at acidic conditions and was found to stabilize the phase‐separated morphologies within blended polythiophene–fullerene heterojunction films. The phase stability of the films was characterized by UV‐VIS spectroscopy and optical microscope. Crosslinkable polythiophene derivatives were also prepared but these materials were much less effective in stabilizing film morphology when mixed into PCBM (C61‐butyric acid methyl ester). Heterojunction polymer PV cells were prepared from these materials and their performance was compared with cells made from conventional materials.     

Production of reactive oxygen species induced by a new [60]fullerene derivative bearing a tetrazole unit and its possible biological applications

The wide range of physical and chemical properties of modified fullerenes has drawn increasing attention in the past few years. As part of this research, this paper describes the preparation, characterization, and photophysical properties of a new fullerene derivative chemically modified with a tetrazole. The photophysical properties were studied by EPR radical spin-trapping technique and showed that reactive oxygen species (ROS) can be produced through UVA photosensitization. EPR spin-trapping experiments with singlet oxygen (¹O₂) and superoxide (O₂⁻) inhibitors (β-carotene and superoxide dismutase, respectively) revealed also that: (i) the main ROS produced is ¹O₂ and (ii) ¹O₂ is being partially dismutated to O₂⁻. The results suggest that this derivative can be used in biological applications, as for example, in topic photodynamic therapy (PDT) as a photosensitizer.     

C60 and carbon: a postbuckminsterfullerene perspective

The discovery of the fullerenes and nanotubes has completely changed our perspective on various aspects of carbon chemistry and materials science in quite fundamental ways. The experiments, which uncovered C₆₀, occurred between 1985 and 1990 and there are lessons to be learned of various kinds over the way scientific advances occur and more importantly the way misconceptions can propagate. For instance much of our received wisdom over the behaviour of carbon, in particular graphite on a microscopic scale, was really quite ill-conceived and certainly misleading. Questions might be asked as to why it took almost till the end of the 20th century for the fact to be uncovered that the elegant C₆₀ molecule had been lurking in the dark shadows of soot chemistry all the time. After all, mass spectrometric techniques were sufficiently advanced for the discovery to have been made in the 1960’s—perhaps even earlier. Some of these issues are addressed here and the discussion gives an insight into the curiously unpredictable way fundamental scientific advances sometimes occur and also highlights the limitations of applied research in this case.     

Easily characterized systems of C60 grafted on SiO2

Fullerenes grafted on silica with cleavable anchors give materials that can be easily characterized after thermal/chemical treatment or use as catalysts. Transesterification of an ester linkage leads to detachment of the fullerene moiety from the silica and permits study with standard spectroscopic methods. In particular, UV-vis spectroscopy was proved to be a valuable tool permitting structure analysis and quantitative determination at the same time.     

Investigation of fullerene C60 effect on properties of polymethylmethacrylate exposed to ionizing radiation

Effect of fullerene C₆₀ was investigated on thermal, mechanical and optical properties of polymethylmethacrylate (PMMA) under ionizing radiation. It was stated that fullerene C₆₀ behaves as an effective antirad with respect to PMMA. Fullerene C₆₀ addition raises temperature of destruction for polymer subjected to electron radiation by 20-25 °C, lowers the rate from 4 to 4.5 times and increases the activation barrier for radiated PMMA destruction reaction. Fullerene C₆₀ addition promotes improvement of strength properties of PMMA: for films containing C₆₀ addition and else subjected to electron radiation treatment a decrease in rupture strength is 10-15%, for samples containing no fullerene it equals ∼25%. Interaction of free radicals with fullerene at radiation treatment influences optical characteristics of PMMA films.     

Loss of characteristic absorption bands of C60 conjugation systems in the addition with aliphatic amines

The characteristic absorption bands disappear and the shortest band at approximately 244 nm in cyclohexane or 282 nm in toluene remained only with long smoothing tail as C60 reacts adequately with aliphatic amines under sunlight radiation at approximately 40 degrees C. Simultaneously, fluorescence emission shifts from a weak band initially at longer wavelength to another strong one finally at shorter wavelength. The results might imply that the pi-conjugation system of C60 parent molecule is isolated into smaller separated parts. Therefore, some possible isolation models associated with observed experimental results are designed under some reasonable assumptive conditions.     

Tetrakis (Pyridine)silver Dichromate Py4Ag2Cr207 - A Mild and Efficient Reagent for the Conversion of Benzylic and Allylic Alcohols to Their Corresponding Carbonyl Compounds

Tetrakis(pyridine)silver dichromate is prepared and used for the oxidation of benzylic and allylic alcohols in refluxing benzene in high yields.     

Solvent-free fluorination of organic compounds using N-F reagents

Efficient fluorination of 1,3-dicarbonyl compounds, enol acetates of aromatic ketones, and activated aromatic compounds was achieved under solvent-free conditions using Selectfluor™ F-TEDA-BF₄ or Accufluor™ NFSi.     

Novel approach for synthesis of 2:1 permethylated β-cyclodextrin-C60 conjugate

Amphiphilic cyclodextrin-fullerene conjugates have potential biological activity, due to their water solubility. In order to study the influence of the linker of these conjugates on solubility and aggregation, a permethylated β-cyclodextrin-C₆₀ conjugate with a short linker -(CH₂)₂NHCO-, which is attached to the secondary face of β-cyclodextrin was synthesized. Its solubility in water and its UV spectrum in CH₂Cl₂ and water were investigated.     

Effect of surface fluorination and conductive additives on the electrochemical behavior of lithium titanate (Li4/3Ti5/3O4) for lithium ion battery

Effect of surface fluorination and conductive additives on the charge/discharge behavior of lithium titanate (Li_4/3Ti_5/3O₄) has been investigated using F₂ gas and vapor grown carbon fiber (VGCF). Surface fluorination of Li_4/3Ti_5/3O₄ was made using F₂ gas (3 × 10⁴ Pa) at 25-150 °C for 2 min. Charge capacities of Li_4/3Ti_5/3O₄ samples fluorinated at 70 °C and 100 °C were larger than those for original sample at high current densities of 300 and 600 mA/g. Optimum fluorination temperatures of Li_4/3Ti_5/3O₄ were 70 °C and 100 °C. Fibrous VGCF with a large surface area (17.7 m²/g) increased the utilization of available capacity of Li_4/3Ti_5/3O₄ probably because it provided the better electrical contact than acetylene black (AB) between Li_4/3Ti_5/3O₄ particles and nickel current collector.     

C60的加成反应

富勒烯化学是以全碳分子球烯为母体的新兴有机化学领域, 在材料、医学及立体化学合成方法等方面具有广泛的应用和发展前景。本文综述了C₆₀的加成反应, 较全面地展示了富勒烯的化学性质。     

Thermochemistry of C60 and C70 fullerene solvates

In an effort to improve understanding of dissolution behaviour of fullerenes and their simple chemical derivatives the binary systems of C₆₀, C₇₀ and the piperazine monoadduct of [60] fullerene C₆₀ N₂C₄H₈ with a series of aromatic solvents have been studied by means of DSC. In certain systems solid solvates have been found to be the thermodynamically stable phases relative to saturated solution at room temperature. Identified solid solvates were characterized by their compositions, temperatures and enthalpies of incongruent melting transitions. The regularities in thermodynamic stability of the solvated crystals have been discussed along with dissolution properties of fullerenes and the derivative. Certain correlations have been observed.     

High-temperature and photochemical syntheses of C60 and C70 fullerene derivatives with linear perfluoroalkyl chains

New experimental results on perfluoroalkylation of C₆₀ and C₇₀ with the use of R_fI (R_f = CF₃, C₂F₅, n-C₃F₇, n-C₄F₉, and n-C₆F₁₃), along with a critical overview of the existing synthetic methods, are presented. For the selected new fullerene (R_f)_n compounds we report spectroscopic, electrochemical and structural data, including improved crystallographic data for the isomers of C₇₀(C₂F₅)₁₀ and C₆₀(C₂F₅)₁₀, and the first X-ray structural data for the dodecasubstituted perfluoethylated C₇₀ fullerene, C₇₀(C₂F₅)₁₂, which possesses unprecedented addition pattern.     

Synthesis of Dendrimers with Porphyrine Core and their Supramolecular Complexes with Fullerene C60

Dendritic branches of poly(arylether) with peripheral butyl chains have been attached to a porphyrine core. Dendrimers of first, second and third generation were synthesized. Viability to form supramolecular complexes with fullerene C₆₀ was studied with two dendrimers of second and third generation. The supramolecular complexes were characterized by ¹H, ¹³C NMR in solution, FTIR, UV-vis spectroscopy and elemental analysis.     

双亲性C60衍生物水相聚集行为

富勒烯C₆₀几乎不溶于水中,从而阻碍了对富勒烯的进一步研究和潜在应用。双亲性C₆₀衍生物在水相中自组装形成聚集体,在水相具有一定的溶解度,其特殊的结构及性能引起了科学家的广泛关注。本文对双亲性C₆₀衍生物在水相中聚集行为的研究现状及研究进展进行了详细系统的介绍。本文第一部分主要阐述了双亲性C₆₀衍生物的结构,根据修饰到C₆₀表面的功能基类型对双亲性C₆₀衍生物进行了分类。第二部分主要阐述了双亲性C₆₀衍生物在水相的聚集行为以及pH值、溶剂极性、浓度、温度和抗衡离子等因素对聚集行为的影响。