Tris(2,2'-bipyridyl)ruthenium(II)-zirconia-Nafion composite films applied as solid-state electrochemiluminescence detector for capillary electrophoresis

The major goal of this work was to develop a new solid-state electrochemiluminescence (ECL) detector suitable for capillary electrophoresis (CE). The detector was fabricated by coating a sol-gel derived zirconia (ZrO(2))-Nafion composite film on a graphite electrode, then the zirconia-Nafion modified electrode was immersed in tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)(3) (2+)) solution to immobilize this active chemiluminescence reagent. The voltammetric and ECL behaviors of the detector were investigated and optimized in tripropylamine solution. The ratio of 53% for zirconia in the zirconia-Nafion composite provided the highest luminescence intensity of immobilized Ru(bpy)(3) (2+). The ECL can maintain its stability very well in the phosphate solution in the period of 5-90 h when the solid-state ECL detector was immersed in the solution all the time. The optimum distance of capillary outlet to the solid-state ECL detector has been found to be ca. 50-80 microm for a 75 microm capillary. The effects of ionic strength and pH of ECL solution on peak height were investigated. The CE with solid-state ECL detector system was successfully used to detect tripropylamine, lidocaine, and proline. The detection limits (S/N = 3) were 5 x 10(-9) mol.L(-1) for tripropylamine, 1 x 10(-8) mol.L(-1) for lidocaine and 5 x 10(-6) mol.L(-1) for proline, and the linear ranges were from 1.0 x 10(-8) to 1.0 x 10(-5) mol.L(-1) for tripropylamine, 5.0 x 10(-7) mol.L(-1) to 1.0 x 10(-5) mol.L(-1) for lidocaine and 1.0 x 10(-5) to 1.0 x 10(-3) mol.L(-1) for proline, respectively.     

Study on the electrochemiluminescence behavior of ABEI and its application in DNA hybridization analysis

The electrogenerated chemiluminescence (ECL) behavior of N-(4-aminobutyl)-N-ethylisoluminol (ABEI) was studied and it was found that ABEI could produce emission light when oxidized at a +1.0 V (vs. Ag/AgCl) potential in alkaline solution. The addition of H2O2 markedly improved the ECL sensitivity. The pH value of the solution as well as the H2O2 concentration and working potential all have influences on the ECL response. Under optimal conditions, ABEI can be detected in the range 1.3 x 10(-6)-6.5 x 10(-12) mol L(-1). A detection limit of 2.2 x 10(-12) mol L(-1) for ABEI was obtained at a signal-to-noise ratio of 3. ABEI was then used as a marker to label a known sequence oligonucleotide, which was used as a DNA probe for identifying a target ssDNA immobilized on a PPy modified electrode based on a specific hybridization reaction. The hybridization events were evaluated by the ECL measurements. The results showed that only a complementary sequence could form a double-stranded DNA with the DNA probe and give a strong ECL response. A three-base mismatch sequence and non-complementary sequence have no response. The intensity of the ECL was linearly related to the concentration of the complementary sequence in the range 9.6 x 10(-11)-9.6 x 10(-8) mol L(-1), the detection limit was 3.0 x 10(-11) mol L(-1).     

New technique for capillary electrophoresis directly coupled with end-column electrochemiluminescence detection

A new end-column electrochemiluminescence (ECL) detection technique coupling to capillary electrophoresis (CE) is characterized. A 300 microm diameter Pt working electrode was used to directly couple with a 75 microm inner diameter separation capillary without an electric field decoupler. The hydrodynamic cyclic voltammogram (CV) of Ru(bpy) 3 2+ showed that electrophoretic current did not affect the ECL reaction. The presence of high-voltage (HV) field only resulted in the shift of the ECL detection potential. The distance of capillary to electrode was an important parameter for optimizing detection performance as it determined the characteristics of mass transport toward the electrode and the actual concentration of Ru(bpy) 3 2+ in the detection region. The optimum distance of capillary to electrode was decided by the inner diameter of the capillary, too. For a 75 microm capillary, the working electrode should be placed away from the capillary outlet at a distance within the range of 220-260 microm. The effects of pH value of ECL solution and molecular structure of analytes on peak height and theoretical plate numbers were discussed. Using the 75 microm capillary, under the optimum conditions, the method provided a linear range for tripropylamine (TPA) between 1 x 10(-10) and 1 x 10(-5) mol/L with correlation coefficient of 0.998. The detection limit (signal-to-noise ratio S/N = 3) was 5.0 x 10(-11) mol/L. The relative standard deviation in peak height for eight consecutive injections was 5.6%. By this new technique lidocaine spiked in a urine sample was determined. The method exhibited the linear range for lidocaine from 5.0 x 10(-8) to 1.0 x 10(-5) mol/L with correlation efficient of 0.998. The limit of detection (S/N = 3) was 2.0 x 10(-8) mol/L.     

The enhanced electrogenerated chemiluminescence of Ru(bpy)3(2+) by glutathione on a glassy carbon electrode modified with some porphine compounds

It has been found that the electrochemical activity of glutathione was increased greatly at the glassy carbon electrodes modified with 5,10,15,20-tetraphenylporphine ruthenium(II) carbenyl (RuTPP), meso-tetraphenylporphine copper(II) complex (CuTTP) and hemin. It has been also found that glutathione would enhance the electrogenerated chemiluminescence (ECL) of Ru(bpy)3(2+) at a hemin glassy carbon electrode; the enhanced ECL intensity was linear with the concentration of glutathione in the range of 1 x 10(-7)-1 x 10(-4) mol l-1, based on which method for determination of glutathione has been developed. The detection limit of glutathione was 2 x 10(-8) mol l-1, and the relative standard deviation for 1 x 10(-6) mol l-1 glutathione was 2.7%. The mechanism for this ECL system has been proposed.     

The enhanced electrochemiluminescence of luminol on the nickel phthalocyanine modified electrode

A glassy carbon electrode (GCE) modified with nickel(II) tetrasulfophthalocyanine (NiTSPc) and Nafion was used for the investigation of the catalytic oxidation of luminol. The modified electrode was found to much more effectively improve the emission of electrochemiluminescence(ECL) of luminol in a solution containing hydrogen peroxide. The enhanced ECL signal corresponded to the catalytic oxidation of both luminol and H(2)O(2) by NiTSPc. Attached Ni(II) on GCE was oxidised to Ni(III) and then used as the catalyst for the chemiluminescence of luminol. The enhanced stability of the ECL signal with Nafion would mainly result from the prevention of the dissolution of NiTSPc and the adsorption of the oxidation product of luminol on the electrode surface. The proposed method enables a detection limit for luminal of 6.0 x 10(-8) mol L(-1) to be achieved in the presence of H(2)O(2) in the neutral solution. The enhanced ECL intensity had a linear relationship with the concentration of luminol in the range of 1.0 x 10(-7)-8.0 x 10(-6) mol L(-1).     

Homogenous electrogenerated chemiluminescence immunoassay for human immunoglobulin G using N-(aminobutyl)-N-ethylisoluminol as luminescence label at gold nanoparticles modified paraffin-impregnated graphite electrode

A homogeneous electrogenerated chemiluminescence (ECL) immunoassay for human immunoglobulin G (hIgG) has been developed using a N-(aminobutyl)-N-ethylisoluminol (ABEI) as luminescence label at gold nanoparticles modified paraffin-impregnated graphite electrode (PIGE). ECL emission was electrochemically generated from the ABEI-labeled anti-hIgG antibody and markedly increased in the presence of hIgG antigen due to forming a more rigid structure of the ABEI moiety. The concentration of hIgG antigen was determined by the increase of ECL intensity at a gold nanoparticles modified PIGE. It was found that the ECL intensity of ABEI in presence of hydrogen peroxide was dramatically enhanced at gold nanoparticles modified PIGE in neutral aqueous solution and the detection limit of ABEI was 2 x 10(-14)mol/L (S/N=3). The integral ECL intensity was linearly related to the concentration of hIgG antigen from 3.0 x 10(-11) to 1.0 x 10(-9)g/mL with a detection limit of 1 x 10(-11)g/mL (S/N=3). The relative standard deviation was 3.1% at 1.0 x 10(-10)g/mL (n=11). This work demonstrates that the enhancement of the sensitivity of ECL and ECL immunoassay at a nanoparticles modified electrode is a promising strategy.     

Synthesis, characterization, and electrochemiluminescence of luminol-reduced gold nanoparticles and their application in a hydrogen peroxide sensor

It was found that chloroauric acid (HAuCl(4)) could be directly reduced by the luminescent reagent luminol in aqueous solution to form gold nanoparticles (AuNPs), the size of which depended on the amount of luminol. The morphology and surface state of as-prepared AuNPs were characterized by transmission electron microscopy, UV/visible spectroscopy, X-ray photoelectron spectroscopy, FTIR spectroscopy, and thermogravimetric analysis. All results indicated that residual luminol and its oxidation product 3-aminophthalate coexisted on the surface of AuNPs through the weak covalent interaction between gold and nitrogen atoms in their amino groups. Subsequently, a luminol-capped AuNP-modified electrode was fabricated by the immobilization of AuNPs on a gold electrode by virtue of cysteine molecules and then immersion in a luminol solution. The modified electrode was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy. The as-prepared modified electrode exhibited an electrochemiluminescence (ECL) response in alkaline aqueous solution under a double-step potential. H2O2 was found to enhance the ECL. On this basis, an ECL sensor for the detection of H2O2 was developed. The method is simple, fast, and reagent free. It is applicable to the determination of H2O2 in the range of 3x10(-7)-1x10(-3) mol L(-1) with a detection limit of 1x10(-7) mol L(-1) (S/N=3).     

固定化联吡啶钌电化学发光结合微透析采样在线研究药物蛋白反应

基于Nepem-105D全氟离子交换溶液形成的离子交换膜将联吡啶钌(Ⅱ)固定化于铂电极表面,设计制作了一种简单方便、高灵敏的新型电化学发光传感器.结合微透析采样技术,建立了在线研究环丙沙星与牛血清白蛋白的相互作用的新方法.结果表明:在优化的实验条件下,相对发光强度(△I)与环丙沙星浓度在3.0×10-8～3.0×10-5 mol/L范围内呈良好的线性关系,检出限为1.0×10-8 mol/L.利用本方法研究了环丙沙星与牛血清白蛋白的相互作用,得到环丙沙星与牛血清白蛋白的结合常数K=3.51×104 L/mol,结合位点数n=1.49.本方法可快速简便地研究药物与蛋白相互作用,在药效学和药代动力学等方面具有潜在的应用前景.     

An electrochemiluminescent sensor for glucose employing a modified carbon nanotube paste electrode

A carbon nanotube paste (CNTP) electrode and a carbon nanotube paste/glucose oxidase (CNTP/GOx) electrode were prepared, and the electrochemiluminescent (ECL) behavior of luminol in the presence of glucose was investigated in detail at each of these electrodes. Compared to the classical carbon paste (CP) electrode, the CNTP electrode incorporating glucose oxidase greatly enhanced the response of the ECL sensor to glucose due to the electrocatalytic activity of the carbon nanotubes, the specificity of the enzymatic reaction, and the sensitivity of the luminol ECL reaction. Under optimal conditions, the electrode was found to respond linearly to glucose in the concentration range 1.0x10(-6) approximately 2.0x10(-3) mol/L, and the detection limit (defined as the concentration that can be detected at a signal-to-noise ratio of 3) was found to be a glucose concentration of 5.0x10(-7) mol/L. The method used to prepare the CNTP/GOx electrode was very convenient, and the electrode surface could be renewed in the case of fouling by simply polishing or cutting it to expose a new and fully active surface. The relative standard deviations (RSD) were found to be 6.8% and 8.9% for the CNTP electrode and the CNTP/GOx electrode (n=6). The electrode retained 95% of its initial response after two weeks.     

Flow-injection electrogenerated chemiluminescence determination of isoniazid using luminol.

Based on a new electrogenerated chemiluminescence (ECL) analytical idea, this paper explains a sensitive and selective flow-injection ECL method using luminol for the determination of isoniazid, based on the sensitizing effect of isoniazid for the weak ECL emission of electrochemically oxidized luminol. Under the optimum experimental conditions, the relative ECL intensity was linear with isoniazid concentration in the range of 4.0 x 10(-8) mol/L to 8.0 x 10(-6) mol/L and with a detecting limit of 2.8 x 10(-8) mol/L.     

A method to determine quercetin by enhanced luminol electrogenerated chemiluminescence (ECL) and quercetin autoxidation

Quercetin greatly enhanced luminol electrochemiluminescence of quercetin in alkaline solution. When the concentration of luminol was 0.1 mol L(-1), the detection limit for quercetin was 2.0x10(-8) mol L(-1) with a linear range from 1.0x10(-7) to 2x10(-5) mol L(-1). The pH and buffer substantially affected ECL intensity. Quercetin was autoxidized in alkaline aqueous solution. The rate of autoxidation of quercetin in various pH buffers and borate concentrations were measured. Borate was found to inhibit quercetin autoxidation and compromise quercetin enhancement effect on luminol ECL to some extent. Two final autoxidation products were identified with LC-MS methods. Autoxidation process was associated with enhancement of ECL intensity. The ROS generated during quercetin autoxidation enhanced the ECL intensity.     

An on-line galvanic cell-generated electrochemiluminescence and flow injection determination of calcium in milk and vegetables.

An on-line Ag/Al galvanic cell was studied and employed to generate electrochemiluminescence (ECL) of calcein blue. The potential of the galvanic cell could be adjusted by varying the components of flow reagent or by using different metals to substitute for Ag or Al. The reported cell exhibited perfect capability of supplying a stable potential for ECL generation. Because the weak ECL of calcein blue could be greatly sensitized in the presence of calcium in alkaline solution, calcium contents in milk and vegetable samples were assayed; the results were validated with ICP-AES method. The method gave linear results in 1.0 x 10(-4) mol L(-1) to 8.0 x 10(-6) mol L(-1) calcium concentration range and the 3(sigma)limit of detection was to be 2.0 x 10(-6) mol L(-1). Experiment results imply that this model of ECL detection could be applied for instrument miniaturization with easy fabrication.     

十二烷基苯磺酸钠-盐酸苯海索-Ru(bpy)2+3体系的电化学发光行为研究及应用

在十二烷基苯磺酸钠(SDBS)存在下,考察了盐酸苯海索(BH)-Ru(bpy)32+体系的电化学及其发光行为。结果表明,BH对Ru(bpy)32+体系的电化学发光具有增敏效应;在SDBS存在下,BH对Ru(bpy)32+体系电化学发光的增敏效应显著增强,发光强度提高约16倍。据此建立了一种高效、简便的BH电化学发光新方法。在最佳实验条件下,BH的浓度在4.0×10-7～1.0×10-4 mol/L范围内与相对发光强度呈线性关系(r=0.995 5),检出限(S/N=3)为1.11×10-9 mol/L;连续平行测定1.0×10-5 mol/L BH溶液10次,发光强度的RSD为3.2%。样品的回收率为96%～108%,RSD为4.3%。该方法样品前处理简单,具有较高的选择性和灵敏度,用于实际样品中BH的测定,结果满意。     

[Ru(bpy)2(L-Trp)]ClO4-KCl水溶液体系的电致化学发光特性研究

合成了[Ru(bpy)2(L-Trp)]ClO4, 并对其电致化学发光特性进行研究。发现在KCl溶液中, 在三角波脉冲电压作用下, 该配合物在铂电极上有电致化学发光活性。其线性动力学响应范围为5.9×10^-^9～1.2×10^-^7mol . L^-^1。当信噪比为3时, 可检测浓度为5.9×10^-^9mol . L^-^1。浓度为5.9×10^-^8mol . L^-^1时, 10次测试的相对标准偏差为5.3%。根据电化学研究的结果, 提出了该配合物的电致化学发光反应机理。     

磺基水杨酸修饰电极联吡啶钌电化学发光体系测定可待因的研究

基于磷酸可待因对联吡啶钌在该电极上的电化学及其发光行为的增敏作用,建立了一种直接测定磷酸可待因的电化学发光新方法。在最佳实验条件下,磷酸可待因在1.0×10-4～4.0×10-6mol/L和4.0×10-6～2.0×10-7mol/L与相对发光强度呈线性关系,检出限为1.0×10-7mol/L(S/N=3)。连续测定4.0×10-7mol/l磷酸可待因5次,发光强度的RSD为2.7%。方法用于模拟尿样中磷酸可待因的测定,结果满意。     

Highly Sensitive Electrogenerated Chemiluminescence Detecting Ranitidine Based On Chemically Modifying Microenvironment of the Chemiluminescence Reaction

Using a graphite electrode modified with vaseline and NiO, ranitidine showed a strongly ECL enhancing effect for the weak ECL signal of electrooxidation of luminol. Based on this finding, a more sensitive ECL method for ranitidine was firstly proposed. Under the optimum experimental conditions, the ranitidine hydrochloride concentration in the range of 3.0×10^?8–9.0×10^?6 mol/L was proportional to the enhancing ECL signal and offered a 9×10^?9 mol/L detection limit for ranitidine hydrochloride. At the same time, based on the investigation on this ECL reaction mechanism, a new concept, to improve the suitable ECL reaction micro‐environment with chemically modified electrode technique for the better analytical performances of ECL analysis was also firstly proposed.     

氧化锌修饰铅笔芯电极电致化学发光法测定苯酚的研究

采用滴涂法将氧化锌纳米颗粒滴涂在自制铅笔芯电极上制成氧化锌修饰铅笔芯电极,当以过硫酸根为共反应剂时,该修饰电极在氢氧化钠溶液中具有良好的电致化学发光(ECL)行为,对其发光机理进行了考察。基于苯酚对该修饰电极的ECL具有抑制作用,建立了一种测量苯酚的新方法,当苯酚浓度为2×10~(-8)~2×10~(-6)mol/L时,发光强度与苯酚浓度的对数呈线性关系,检出限为1×10~(-8)mol/L。该方法具有灵敏度高、方法简单、快速、稳定性好等优点,将其应用于工业废水中苯酚浓度的检测,回收率为96.5%~104.5%。     

Enhanced electrochemiluminescence employed for the selective detection of methyl parathion based on a zirconia nanoparticle film modified electrode

A simple, rapid and sensitive electrochemiluminescence (ECL) sensor was proposed for direct measurements of methyl parathion (MP) based on the strong affinity of a nano zirconia particles (ZrO(2) NPs) modified film on the electrode to the phosphoric group. ZrO(2) NPs, which could provide a larger absorption area to immobilize organophosphorus, was firstly modified on the glassy carbon electrode surface to prepare the proposed ECL sensor (ZrO(2)/GC). Subsequently, the ZrO(2)/GC electrode was scanned from -0.8 to +0.6 V to obtain the background signal at 0.44 V in a luminol/KCl solution. Then, a certain concentration of MP was added to an aqueous solution for 240 s, which was absorbed onto the ZrO(2)/GC electrode surface. Moreover, the MP absorbed on the surface of the ZrO(2)/GC electrode enhanced the ECL signal of luminol in the luminol/KCl solution, which increased with the concentration of MP. As a result, a novel ECL sensor was obtained in a luminol/KCl solution. The MP was determined in the range of from 3.8 × 10(-11) to 3.8 × 10(-6) mol L(-1), with a low detection limit of 1.27 × 10(-11) mol L(-1) (S/N = 3). The proposed ECL sensor performance for MP detection will open a new field in the application of rapid and screen detection of ultra-trace amounts of organ phosphorus pesticides (OPs) of vegetables used in farm markets.     

基于工具酶信号放大技术电化学发光法检测凝血酶

利用巯基乙胺将合成的金纳米粒子氨基化;基于纳米粒子负载羧基化的联吡啶钌和巯基DNA制得电化学发光信号探针;采用酶循环信号放大技术,获得大量含新增DNA的溶液来捕获信号探针;以金电极为载体,将巯基DNA自组装到电极表面,依次杂交互补DNA和信号探针,构建电化学发光生物传感器.在优化的条件下,此传感器对凝血酶具有良好的响应,在3.0× 10-13～6.0×10-11 mol/L范围内,凝血酶的浓度与发光强度呈良好的线性关系,检出限为1.8× 10-13 mol/L(3a).采用酶切循环放大技术制备的生物传感器具有灵敏度高,选择性和重现性良好等特点.     

Mono- and dinuclear Ru(II) complexes of 1,4-bis(3-(2-pyridyl)pyrazol-1-ylmethyl)benzene): synthesis, structure, photophysical properties and electrochemiluminescent determination of diuretic furosemide

Mononuclear ruthenium complex 1 and dinuclear complex 2 were synthesized by reaction of the appropriate bidentate pyrazolyl-pyridyl-based ligand L (L = 1,4-bis(3-(2-pyridyl)pyrazol-1-ylmethyl)benzene) with cis-Ru(bipy)(2)Cl(2)·2H(2)O. They were characterized by elemental analyses, ESI-MS, (1)H spectroscopy, and X-ray crystallography for 2. Compounds 1 and 2 both emit strongly in solid states and in solutions at 298 K with the lifetimes in the microsecond range. Electrogenerated chemiluminescence (ECL) of complexes 1 and 2 in the absence or presence of coreactant tri-n-propylamine (TPrA) or 2-(dibutylamino)ethanol (DBAE) at different working electrodes in acetonitrile and phosphate buffer solutions (PBS, pH 7.5) was studied. The ECL spectra are identical to the photoluminescence spectra, indicating that the ECL emissions are due to the metal to ligand charge transfer (MLCT). In all cases, ECL quantum efficiencies of dinuclear complex 2 are higher than those of mononuclear complex 1, and ECL quantum efficiencies of complexes 1 and 2/TPrA system are higher than those of DBAE system. It is noted that diuretic furosemide tends to decrease the ECL intensity of complex 2/TPrA system in PBS (pH 7.5) at GC working electrode. A novel ECL method for the determination of diuretic furosemide was developed with a linear range between 2.0 × 10(-7) mol L(-1) and 1.0 × 10(-6) mol L(-1), and a detection limit of 1.2 × 10(-8) mol L(-1) based on 3 times the ratio of signal-to-noise.