硫脲基纳米螯合纤维对水溶液中Cd(Ⅱ)的吸附和密度泛函理论计算

以聚丙烯腈为原料, 利用静电纺丝技术和化学接枝制备得到硫脲基纳米螯合纤维, 并用于水溶液中 Cd(Ⅱ)的去除. 结合样品的表征和密度泛函(DFT)理论计算结果, 揭示了所制备纳米纤维材料对Cd(Ⅱ)的吸附机理. 借助静态吸附和动态吸附实验, 考察了硫脲基纳米螯合纤维对Cd(Ⅱ)的吸附性能. 结果表明, 纳米纤维吸附材料对Cd(Ⅱ)的最大吸附容量可达349.46 mg/g, 吸附过程在90 min以内即可达到基本平衡. 整个吸附过程符合准二级动力学模型和Langmuir等温吸附模型. 硫脲基纳米螯合纤维吸附Cd(Ⅱ)的吸附机理为表面配位络合, 增加纳米纤维表面硫脲基团的含量是提高吸附容量的重要途径. 该吸附材料经6次循环使用后, 最大动态吸附容量并未发生明显改变.     

一种PAN基偕胺肟螯合纤维对重金属离子的吸附性能

利用有限浴技术对一种PAN基偕胺肟螯合纤维的吸附性能进行了系统研究。结果表明:由于该功能纤维材料含胺肟及多烯多胺双重功能基,因此对Cu2+、Ni2+、Co2+、Hg2+等重金属离子具有很好吸附性能。交联型偕胺肟螯合纤维物理化学性能良好,洗脱再生简便,可望用于湿法冶金及重金属离子工业废水的资源化治理等领域。     

Ca2+-Mg2+-Zn2+体系在水溶性聚磷酸铵溶液中螯合规律的研究

近年来,水溶性聚磷酸铵在液体肥料和复合肥料的领域受到了广泛的关注,并在发达国家中得到了大面积的推广及应用。在pH值为5.5~8.0、温度为278.15 K~323.15 K的条件下,本文采用滴定法研究Ca_²⁺-Mg_²⁺-Zn_²⁺体系在聚磷酸铵溶液中的螯合规律。实验结果表明：相同质量分数的聚磷酸铵溶液对金属离子的螯合量会随着体系中Ca_²⁺、Mg_²⁺、Zn_²⁺的摩尔浓度的变化而变化;随着温度的升高而逐渐降低;随着pH的增加而逐渐增加;随着聚合度的升高而逐渐增加。采用傅里叶红外光谱对聚磷酸铵和A₁B₃C₃体系的螯合物进行表征。     

新型侧链液晶聚醚螯合树脂的合成及其对水中Cu2 +的吸附性能研究

以环氧环己烷作为改性单体,通过环氧氯丙烷与环氧环己烷阳离子开环聚合获得分子量约为3000的共聚醚主链。然后以联苯为介晶基元、亚氨基二乙酸为末端螯合基团,成功合成了一种新型结构的侧链液晶聚醚螯合树脂。在对其结构鉴定以及基础物理性质测定的基础上,系统地研究了该树脂对水中Cu²⁺吸附的影响因素、再生性能、吸附选择性、吸附模型以及吸附动力学。结果表明,该树脂对Cu²⁺具有良好的吸附性能、再生性能和选择性,其对水中Cu²⁺的吸附为Langmuir单分子层吸附,吸附过程符合准二级动力学模型。     

硫代酰胺基螯合纤维的合成及其吸附性能研究

以腈纶纤维(PAN)为起始原料,分别经水合肼、乙二胺、二乙烯三胺预交联后,以N,N-二甲基甲酰胺(DMF)作溶剂与硫化钠反应,合成了3种携硫代酰胺功能基可达6.8mmol/g·干纤维的螯合功能纤维。利用红外光谱、元素分析、热稳定分析、重量分析等对该螯合纤维的结构、性能等进行了表征;研究了该螯合纤维对Au3 ,Ag ,Pd2 等贵金属离子的吸附性能;考察了温度、pH、硫含量等对纤维吸附Ag 离子的影响。结果表明,纤维对Au3 ,Ag 等贵金属离子具有良好的吸附性能,对Au3 的吸附容量为800mg/g·干纤维;对Ag 离子的吸附容量可达1510mg/g·干纤维,并具有良好的吸附动力学特性,该螯合纤维可用于混合溶液中Ag(I)离子的吸附分离。     

氨基硫脲修饰卟啉基聚合物的制备及对CO2和Hg2+的吸附

利用四苯基卟啉和三种酰基化交联剂(草酰氯、对苯二甲酰氯和均苯三甲酰氯)经Friedel-Crafts酰基化反应,制备了卟啉基聚合物中间体,进一步用氨基硫脲与之发生席夫碱反应,得到了氨基硫脲修饰卟啉基聚合物.结果发现,聚合物的交联结构使其具有高比表面积和丰富的超微孔,显示出优异的CO₂吸附(138 mg/g,273 K,10⁵ Pa)及CO₂/N₂选择性.同时,聚合物表面氨基和硫脲的引入使得其对Hg²⁺的吸附量可达311.0 mg/g,吸附机理也证实了N和S对Hg²⁺的配位作用.     

螯合吸附材料ASA-PGMA/SiO2对稀土离子的吸附性能研究

采用静态吸附法研究了ASA-PGMA/SiO2对稀土离子的螯合吸附性能、吸附动力学和热力学。实验结果表明,其对稀土离子的吸附能力分别为:La3+:38.6 mg.g-1,Pr3+:39.6 mg.g-1,Nd3+:41.8 mg.g-1,Sm3+:42.8 mg.g-1,Tb3+:46.2 mg.g-1。吸附等温模型符合Lang-muir型单分子层吸附。介质pH值对材料的吸附能力有很大影响,pH值为6时吸附量最大。以盐酸为洗脱剂,当酸度为0.1 mol.L-1时,洗脱率为99.8%。连续吸附-脱附实验表明,ASA-PGMA/SiO2重复使用10次后,吸附能力变化很小。     

焙烧温度对Mn-Fe/CeO2-TiO2催化剂低温NH3选择性催化还原NO的影响

采用等体积浸渍法制备了Mn-Fe/CeO2-TiO2催化剂,考察了不同焙烧温度对其NH3选择性催化还原(SCR)NO活性及催化剂性能的影响。并用N2吸附-脱附,X射线衍射(XRD)和X射线光电子能谱(XPS)等手段对催化剂进行了表征。活性结果表明,随着焙烧温度的升高,Mn-Fe/CeO2-TiO2催化剂的催化活性先升高后降低。其中焙烧温度为500℃时Mn/CeO2-TiO2的NH3-SCR活性最佳,该催化剂在113～250℃之间表现出了良好NO去除效率。表征结果表明,500℃焙烧时,催化剂中Fe和Mn物种在CeO2-TiO2表面的分散效果最好。500℃焙烧时Mn-Fe/CeO2-TiO2表面Mn以+4价存在,Fe以+3、+2价存在,而Ce以+4、+3存在。     

球状壳聚糖负载噻二唑树脂的合成及其吸附性能

用苯甲醛保护胺基后,将2-氨基-5-巯基-1,3,4-噻二唑引入到大孔壳聚糖微球上,合成了亲水性的多孔球状吸附树脂(CTS-AMT)。 对比研究了CTS-AMT和母体微球(CTS)对Zn2+、Cu2+、Cd2+、Pb2+、Ag+和Hg2+的吸附性能。 结果表明,pH=5.0,T=298.15 K时,CTS-AMT树脂对上述金属离子的吸附在1.5 h内基本达到平衡,对金属离子Hg2+、Ag+和Pb2+的静态饱和吸附量分别为2.54、2.31和1.71 mmol/g。 在实验浓度范围内该树脂对Hg2+的吸附过程符合 Langmuir等温吸附模型。     

硫脲基红麻纤维的制备及其对Ni2+、Cr3+、Mn2+的吸附性

红麻纤维是自然界广泛存在的一类天然高分子化合物 ,分子链由葡萄糖单体通过 β -1 ,4糖苷键连接而成 ,其中含有多个羟基 ,具有一定的反应活性。选取链上的羟基为接枝点 ,经过高分子接枝反应 ,把具有较强配位与螯合能力的基团引入链中 ,从而得到对金属离子具有吸附功能的改性纤维[1,2 ] 。我们选取豫南大别山区盛产的红麻纤维为母体 ,对链上羟基活化而引入硫脲功能基 ,并测试了硫脲基红麻纤维对Ｎｉ2 +、Ｃｒ3+、Ｍｎ2 +的吸附性能 ,探讨了温度、时间等因素对吸附性能的影响。1　实验部分1 .1　仪器与试剂ＷＦＸ -1Ｆ2Ｂ2　原子吸收分光光度…     

Preparation of macroreticular chelating resins containing mercapto groups from 2,3-epithiopropyl methacrylate/divinylbenzene copolymer beads and their adsorption capacity

Macroreticular chelating resins containing mercapto groups were prepared by the reaction of 2,3-epithiopropyl methacrylate/divinylbenzene macroreticular copolymer beads with ethanolic potassium hydrogensulfide solution for 1 h at 50°C. The adsorption capacities of this resin for Ag⁺, Hg²⁺, Pb²⁺ and Cd²⁺ were determined at various pH values. In the acidic region, the resin shows a high affinity for Ag⁺ and Hg²⁺ and high resistance against air oxidation. Cadmium is readily eluted with 1 mol dm^?3 hydrochloric acid; silver, mercury and copper ions can be eluted with 1 mol dm^?3 hydrochloric acid containing 5% (w/v) thiourea. The proposed resin appears to be useful for the removal of As³⁺ from aqueous solutions.     

Salacca zalacca skin and its modified form as biosorbents for Hg2+ removal from aqueous solution

ABSTRACT

A chemically modified-biosorbent was prepared by attaching dithizone onto Salacca zalacca skin waste for Hg²⁺ bioremoval. The material was synthesized by refluxing dithizone 5% with the Salacca zalacca skin powder followed by drying. The material was characterized through scanning electron microscopy, gas sorption analysis, and Boehm titration. The applicability of the material as biosorbent was tested for Hg²⁺ adsorption at room temperature. Findings suggested that the modification altered the surface properties of the biosorbent as indicated by the increased values for such surface parameters as specific surface area, pore volume, and quantitative functional groups. Particularly, the material demonstrated a high removal efficiency during Hg²⁺ adsorption, which fit the pseudo-second-order kinetics. The removal efficiency of Hg²⁺ was not influenced by the adsorbent dosage of 1–4?g/L.     

Preparation of crosslinked polystyrene-supported ethylenediamine via a S-containing spacer and adsorption properties towards metal ions

Two novel chelating resins were prepared by anchoring ethylenediamine to crosslinked polystyrene via a spacer containing sulfide. Their structures were characterized by Fourier transform-infrared spectra (FTIR) and scanning electron microscopy (SEM). Porous structure parameters of the resins were measured by ASAP 2020 using BET and BJH methods. Their adsorption capacities for several heavy metal ions especially Hg²⁺ were investigated. The results showed that for the two resins, the more N contents did not mean the better adsorption capacity and the saturated adsorption capacity of poly(2-ethylenediamidomercaptomethylstyrene) (PSM-EDA) for Hg²⁺ could reach to 3.0 mmol/g at room temperature. Isothermal adsorptions of the resins for Hg²⁺ could be described by Langmuir formula. The adsorption mechanism of the resins for Hg²⁺, Cu²⁺ and Ag⁺ was confirmed by X-ray photoelectron spectroscopy (XPS) and FTIR.     

Preparation and adsorption properties of crosslinked polystyrene-supported low-generation diethanolamine-typed dendrimer for metal ions

Two novel chelating resins, polystyrene supported G1.0 diethanolamine-typed dendrimer (PS-DEA) and G2.0 diethanolamine-typed dendrimer (PS-(DEA)₂), were prepared by anchoring low-generations diethanolamine-typed dendrimer into crosslinked polystyrene in this paper. Fourier transform-infrared spectra (FTIR), scanning electron microscopy (SEM) and elemental analysis were employed to character their structures. The results of adsorption for metal ions showed that the resins had good adsorption capacities for Cu²⁺, Ag⁺ and Hg²⁺, especially PS-DEA for Cu²⁺. The adsorption kinetics and adsorption isotherms of PS-DEA for Cu²⁺ and PS-(DEA)₂ for Hg²⁺ were studied. The results showed that the adsorption kinetics of the two resins can be modeled by pseudo second-order rate equation wonderfully and Langmuir and Freundlich equations could well interpret the adsorption of PS-(DEA)₂ for Hg²⁺ and PS-DEA for Cu²⁺, respectively. The adsorption mechanism of the resins for Cu²⁺ was confirmed by X-ray photoelectron spectroscopy (XPS).     

Amin-functionalized magnetic-silica core-shell nanoparticles for removal of Hg2+ from aqueous solution

Magnetic nanoparticles with monodisperse shape and size were prepared by a simple method and covered by silica. The prepared core-shell Fe₃O₄@silica nanoparticles were functionalized by amino groups and characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer-Emmett-Teller (BET) and Fourier transform infrared spectroscopy (FT-IR) techniques. The synthesized nanoparticles were employed as an adsorbent for removal of Hg²⁺ from aqueous solutions, and the adsorption phenomena were studied from both equilibrium and kinetic point of views. The adsorption equilibriums were analyzed using different isotherm models and correlation coefficients were determined for each isotherm. The experimental data were fitted to the Langmuir–Freundlich isotherm better than other isotherms. The adsorption kinetics was tested for the pseudo-first-order, pseudo-second-order and Elovich kinetic models at different initial concentrations of the adsorbate. The pseudo-second-order kinetic model describes the kinetics of the adsorption process for amino functionalized adsorbents. The maximum adsorption occurred at pH 5.7 and the adsorption capacity for Fe₃O₄@silica-NH₂ toward Hg²⁺ was as high as 126.7 mg/g which was near four times more than unmodified silica adsorbent.     

Recyclable Supramolecular Assembly-Induced Emission System for Selective Detection and Efficient Removal of Mercury(II)

An efficient strategy for simultaneously detecting and removing Hg²⁺ from water is vital to address mercury pollution. Herein a supramolecular assembly G ⊂ H with photoluminescent properties is facilely constructed through the self-assembly of a functional pillar[5]arene bearing two N,N-dimethyldithiocarbamoyl binding sites ( H ) and an AIE-active tetraphenylethene derivative ( G ). Remarkably, the fluorescence of G ⊂ H can be exclusively quenched by Hg²⁺ among the 30 cations due to the formation of non-luminous ground state complex and only L-cysteine can restore fluorescence in the common 20 amino acids. Meanwhile, the probe G ⊂ H has a considerable thermal and pH stability, a good anti-interference property from various cations, and a satisfactory sensitivity. More importantly, G ⊂ H exhibits a prominent capability of Hg²⁺ removal with rapid capture rate (within 1 h) and excellent adsorption efficiency (98 %), as well as a highly efficient recyclability without losing any adsorption activity.     

Effective ultrasound-assisted removal of heavy metal ions As(III), Hg(II), and Pb(II) from aqueous solution by new MgO/CuO and MgO/MnO<Subscript>2</Subscript> nanocomposites

A series of new (MgO) _x CuO and (MgO) _x MnO₂ nanocomposites were prepared and used as adsorbent for removal of As³⁺, Hg²⁺, and Pb²⁺ ions from aqueous solution with high capacity and detection limit. These nanocomposites were synthesized with different molar ratios by sonochemical method in alkaline solution using polyvinylpyrrolidone as a capping agent and were characterized by FTIR, AAS, UV–Vis spectroscopy, and TEM and SEM imaging. The maximum heavy metal ions adsorption was achieved for (MgO)_0.32CuO and (MgO)_2.9MnO₂ nanocomposites assisted by 3-min sonication using ultrasound. Adsorbent capacity of (MgO)_0.32CuO reached 500.0 mg/g and detection limit was 0.1 ppb for As³⁺. Also (MgO)_2.9MnO₂ nanocomposite adsorbed 457.1 mg/g of Hg²⁺ and 461.2 mg/g of Pb²⁺. Extremely low detection limits of 1.5 and 2.0 ppb were obtained for Hg(II) and Pb(II) ions, respectively, which are much lower than the WHO allowable limits. So, these nanocomposites should be excellent candidate for heavy metal removal with advantage of high capacity, high sensitivity, cost effectiveness and easy preparation.     

Azido chelating fiber: synthesis,characterization and adsorption performances towards Hg2+ and Pb2+ from water

Herein, we report the synthesis and adsorption property of a novel chelating fiber containing azido group. Firstly, the brominated fiber (PP‐St‐DVB‐Br) was obtained via the reaction of polypropylene‐(g)‐styrene‐divinylbenzene fiber (PP‐St‐DVB) with bromine in CH₂Cl₂ solution. Then, azido chelating fiber (PP‐St‐DVB‐N₃) was prepared by azidation of PP‐St‐DVB‐Br fiber. Its structure and properties were characterized by Fourier transform infrared, elemental analysis, thermogravimetric analysis, and chemical titration, respectively. The micromophology and functional group distribution in fibrous matrix were investigated by scanning electron microscopy‐energy dispersive spectroscopy. The results show that the chelating fiber has high functional group contents (2.11 mmol/g for PP‐St‐DVB‐N₃) and uniform distribution. Different from granulate chelating resin, the novel fibrous adsorbent possesses excellent adsorption ability for Hg(II) and Pb(II) ions (408.9 mg/g for Hg²⁺ and 334.4 mg/g for Pb²⁺), and the adsorption capacity of the fiber has no loss until five cycles. The novel absorbent material shows the potential application prospect in the treatment of heavy metal wastewater. Copyright © 2017 John Wiley & Sons, Ltd.     

Theoretical and Experimental Study of Pb2+ and Hg2+ Adsorption on Biopolymers, 1. Theoretical Study

Chitosan and pectic acid have been modeled as disaccharides or oligosaccharides for Hg²⁺ and Pb²⁺ adsorption. Reasonable models of both biopolymers were used. Several adsorption sites of both polysaccharides were considered, mainly NH₂ in chitosan and CO₂^– in pectic acid. Hg²⁺ has several points of anchorage on chitosan. The most important one is NH₂ . The Molecular Mechanic modeling permit us to compare in relative terms the different conformations of models of pectic acid and chitosan and their effect in heavy metal coordination. Using the Parameterized Model version 3 (PM3), we report the formation enthalpy of inter‐ and intramolecular compounds with Hg and Pb. The Extended Huckel method (EHM) results seem to indicate that electrostatic interaction (leading to adsorbed cation on NH₂ and on sites different to NH₂) could be the reason for the high uptake found for Hg²⁺ using chitosan. Besides NH₂, the OH near the amine group is the preferred site for Hg²⁺ adsorption, especially if it is ionized. In the case of Pb²⁺ adsorption, several sites of chitosan present no interaction with this cation. Only the NH₂ group and the ionized OH group mentioned above seem to be the preferred sites, following the EH modified (EHMO) results. The Hg‐ and Pb‐adsorption modeling on pectic acid permit us to conclude that the best site is the same for both metals: the bridge oxygen between monomers of galacturonic acid. the carbonyl group from carboxylate is the best second site for Hg²⁺, whereas the internal oxygen bridge is the best second site for Pb²⁺. Considering the Hg ²⁺ chemistry in aqueous solution, we evaluated the HgOH⁺ and HgCl⁺ or HgCl₃^– adsorption on both copolymers, using EHMO. The energetic of adsorption changed on both biopolymers for these species, comparing them with Hg²⁺.     

A chelating resin with bis[2-(2-benzothiazolylthioethyl)sulfoxide]: Synthesis, characterization and properties for the removal of trace heavy metal ion in water samples

A new chelating resin containing bis[2-(2-benzothiazolylthioethyl)sulfoxide] was synthesized using chloromethylated polystyrene as material and characterized by elemental analysis and infrared spectra. The adsorption capacities of the newly formed resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were investigated over the pH range 1.0-6.0. The resin exhibited no affinity for alkali or alkaline earth metal ions. The maximum adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were 1.49, 0.96, 0.58, 0.11, 0.37, 0, 0.24, 0.36 and 0.25 mmol g⁻¹, respectively. In column operation it had been observed that Hg²⁺ and Ag⁺ in trace quantity could be separated from different binary mixtures and Hg²⁺ could be effectively removed from industrial wastewater and the natural water spiked with Hg²⁺ at usual pH.