Hydrogen bonding structure and many‐body interactions in 1,3,5‐triazine–(water)3 and 1,2,4‐triazine–(water)3 complexes

The hydrogen bonding structure and many‐body interactions between 1,3,5‐triazine (1,2,4‐triazine) and three water molecules are studied using the density functional theory (DFT) B3LYP method and 6‐31++G** basis set. Various structures of 1,3,5‐triazine–(water)₃ and 1,2,4‐triazine–(water)₃ complexes are investigated, and the seven and eight stable structures are reported for 1,3,5‐triazine–(water)₃ and 1,2,4‐triazine–(water)₃, respectively. Many‐body analysis is also carried out to obtain relaxation energy and many‐body interaction energy (two‐, three‐, and four‐body), and the most stable conformer has the basis set superposition error corrected interaction energy of ?92.09 and ?99.53 kJ/mol. The two‐ and three‐body interactions have significant contribution to the total interaction energy, whereas the relaxation energy, four‐body interactions are very small for 1,3,5‐triazine–(water)₃ and 1,2,4‐triazine–(water)₃ complexes. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Ab initio calculation of the Dzyaloshinskii–Moriya parameters: Spin–orbit GSO‐HF,DFT, and CI approaches

We present ab initio methods to determine the Dzyaloshinskii–Moriya (DM) parameter, which provides the anisotropic effects of noncollinear spin systems. For this purpose, we explore various general spin orbital (GSO) approaches, such as Hartree–Fock (HF), density functional theory (DFT), and configuration interaction (CI), with one‐electron spin–orbit coupling (SOC1). As examples, two simple D_3h‐symmetric models, H₃ and B(CH₂)₃, are examined. Implications of the computational results are discussed in relation to as isotropic and anisotropic interactions of molecular‐based magnets. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Transparent,Ultrahigh‐Gas‐Barrier Films with a Brick–Mortar–Sand Structure

Transparent and flexible gas‐barrier materials have shown broad applications in electronics, food, and pharmaceutical preservation. Herein, we report ultrahigh‐gas‐barrier films with a brick–mortar–sand structure fabricated by layer‐by‐layer (LBL) assembly of XAl‐layered double hydroxide (LDH, X=Mg, Ni, Zn, Co) nanoplatelets and polyacrylic acid (PAA) followed by CO₂ infilling, denoted as (XAl‐LDH/PAA)_n‐CO₂. The near‐perfectly parallel orientation of the LDH “brick” creates a long diffusion length to hinder the transmission of gas molecules in the PAA “mortar”. Most significantly, both the experimental studies and theoretical simulations reveal that the chemically adsorbed CO₂ acts like “sand” to fill the free volume at the organic–inorganic interface, which further depresses the diffusion of permeating gas. The strategy presented here provides a new insight into the perception of barrier mechanism, and the (XAl‐LDH/PAA)_n‐CO₂ film is among the best gas barrier films ever reported.     

Novel Organocatalytic Activation of Unmodified Morita–Baylis–Hillman Alcohols for the Synthesis of Bicyclic α‐Alkylidene‐Ketones

The organocatalytic activation of Morita–Baylis–Hillman alcohols via H‐bonding‐iminium‐ion formation is demonstrated for the first time. This activation strategy enables the Morita‐Baylis–Hillman alcohols to undergo a formal S_N2′ reaction. In combination with the well‐established enamine reactivity, this creates a new reactivity pattern. The application of this new activation mode for the synthesis of bicyclic α‐alkylidene‐ketones is demonstrated. The developed reaction sequence proceeds efficiently affording nature‐inspired target products with four contiguous stereogenic centers in a highly stereoselective manner.     

Metal–organic framework of amine‐MIL‐53(Al) as active and reusable liquid‐phase reaction inductor for multicomponent condensation of Ugi‐type reactions

Metal–organic framework of NH₂‐MIL‐53(Al), with coordinative unsaturated aluminium sites, has been shown to be active in the Groebke–Blackburn–Bienaymé multicomponent coupling reaction based on Ugi‐type amine and aldehyde condensation over isocyanide and then a cyclization process. Interestingly this reaction occurred under solvent‐free conditions with high yield, in which the NH₂‐MIL‐53(Al) could be recovered and reused for five reaction cycles, giving a total turnover number of 455.     

Luminescence Tuning and White‐Light Emission of Co‐doped Ln–Cd–Organic Frameworks

Four new three‐dimensional isostructural lanthanide–cadmium metal–organic frameworks (Ln–Cd MOFs), [LnCd₂(imdc)₂(Ac)(H₂O)₂]?H₂O (Ln=Pr ( 1 ), Eu ( 2 ), Gd ( 3 ), and Tb ( 4 ); H₃imdc=4,5‐imidazoledicarboxylic acid; Ac=acetate), have been synthesized under hydrothermal conditions and characterized by IR, elemental analyses, inductively coupled plasma (ICP) analysis, and X‐ray diffraction. Single‐crystal X‐ray diffraction shows that two Ln^III ions are surrounded by four Cd^II ions to form a heteronuclear building block. The blocks are further linked to form 3D Ln–Cd MOFs by the bridging imdc^3? ligand. Furthermore, the left‐ and right‐handed helices array alternatively in the lattice. Eu–Cd and Tb–Cd MOFs can emit characteristic red light with the Eu^III ion and green light with the Tb^III ion, respectively, while both Gd–Cd and Pr–Cd MOFs generate blue emission when they are excited. Different concentrations of Eu³⁺ and Tb³⁺ ions were co‐doped into Gd–Cd/Pr–Cd MOFs, and tunable luminescence from yellow to white was achieved. White‐light emission was obtained successfully by adjusting the excitation wavelength or the co‐doping ratio of the co‐doped Gd–Cd and Pr–Cd MOFs. These results show that the relative emission intensity of white light for Gd–Cd:Eu³⁺,Tb³⁺ MOFs is stronger than that of Pr–Cd:Eu³⁺,Tb³⁺ MOFs, which implies that the Gd complex is a better matrix than the Pr complex to obtain white‐light emission materials.     

Structure–activity relationship of N‐heterocyclic carbene–Pd(II)–imidazole complexes in Suzuki–Miyaura coupling between 4‐methoxyphenyl chloride and phenylboronic acid

A series of N‐heterocyclic carbene–PdCl₂–imidazole [NHC–Pd(II)–Im] complexes were synthesized and the structure of most of them was unambiguously determined by X‐ray single‐crystal diffraction. The structure–activity relationship of these complexes was investigated for the Suzuki–Miyaura coupling between 4‐methoxyphenyl chloride and phenylboronic acid, and the effect of the NHCs and Im moieties were fully discussed. The sterically hindered IPr‐based complex showed the highest catalytic activity. Copyright © 2013 John Wiley & Sons, Ltd.     

Ethylene copolymerization with cyclic dienes using rac‐Et[Ind]2ZrCl2–Methylaluminoxane

The effect of the copolymerization temperature and amount of comonomer in the copolymerization of ethylene with 1,3‐cyclopentadiene, dicyclopentadiene, and 4‐vinyl‐1‐cyclohexene and the rac‐Et[Ind]₂ZrCl₂–methylaluminoxane metallocene system was studied. The amount of comonomer present in the reaction media influenced the catalytic activity. Dicyclopentadiene was the most reactive comonomer among the cyclic dienes studied. In general, copolymers synthesized at 60 °C showed higher catalytic activities. Ethylene–dicyclopentadiene copolymers with high comonomer contents (>9%) did not show melting temperatures. 1,3‐Cyclopentadiene dimerized into dicyclopentadiene during the copolymerization, giving a terpolymer of ethylene, cyclopentadiene, and dicyclopentadiene. A complete characterization of the products was carried out with ¹H NMR, ¹³C NMR, heteronuclear chemical shift correlation, differential scanning calorimetry, and gel permeation chromatography. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 471–485, 2002; DOI 10.1002/pola.10133     

Assessment of errors in the determination of Mark–Houwink–Sakurada and Stockmayer–Fixman constants using size‐exclusion chromatography with on‐line viscometric detection: Analyses of poly(p‐substituted styrenes) in tetrahydrofuran

In this work, we present values for the Mark–Houwink–Sakurada (MHS) and Stockmayer–Fixman (SF) constants for a series of homopolymers of para‐substituted styrenes (4‐X‐styrene; X = OCH₃, OCH₂CH₃, CH₃, F, Cl, and Br) in THF at room temperature. The respective values of K (in 10⁻⁵ dL/g) and α were: 0.685 and 13.2; 0.662 and 14.1; 0.740 and 8.41; 0.781 and 5.24; 0.726 and 8.95; 0.700 and 7.79. The respective values for K_θ (in 10⁻⁴ dL/g) and K' (in 10⁻⁷ dL/g) were: 6.01 and 16.1; 6.22 and 9.07; 7.64 and 17.4; 5.59 and 23.7; 6.29 and 17.3; 4.44 and 10.3. These constants were measured using size‐exclusion chromatography with on‐line viscometry. As part of this work, we investigate the applicability of common model fitting procedures to this method of measuring MHS/SF constants and the effect of uncertainties in their estimated values on the accuracy of molecular weight analysis. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2557–2570, 1999     

The development of phosphinoamine–Pd(II)–imidazole complexes: implications in room‐temperature Suzuki–Miyaura cross‐coupling reaction

The reaction of N‐methylimidazole (N‐MeIm) and N‐butylimidazole (N‐BuIm) with the complexes [PdCl₂(PPh₂py–P,N)] and [PdCl₂(PPh₂Etpy–P,N)] in the presence of NH₄PF₆ under N₂ at room temperature afforded four new cationic Pd(II) complexes [PdCl(PPh₂py–P,N)(N‐MeIm)](PF₆) ( 1 ), [PdCl(PPh₂py–P,N)(N‐BuIm)](PF₆) ( 2 ), [PdCl(PPh₂Etpy–P,N)(N‐MeIm)](PF₆) ( 4 ) and [PdCl(PPh₂Etpy‐P,N)(N‐BuIm)](PF₆) ( 5 ) in good yields, where PPh₂py is 2‐(diphenylphosphino)pyridine and PPh₂Etpy is 2‐{2‐(diphenylphosphino)ethyl}pyridine). The complexes were fully characterized. The catalytic activities of these complexes were investigated for Suzuki–Miyaura cross‐coupling reactions at room temperature. Complex 2 exhibited excellent activity compared to other analogs. Copyright © 2013 John Wiley & Sons, Ltd.     

Selected‐Control Fabrication of Multifunctional Fluorescent–Magnetic Core–Shell and Yolk–Shell Hybrid Nanostructures

The selected‐control preparation of uniform core–shell and yolk–shell architectures, which combine the multiple functions of a superparamagnetic iron oxide (SPIO) core and europium‐doped yttrium oxide (Y₂O₃:Eu) shell in a single material with tunable fluorescence and magnetic properties, has been successfully achieved by controlling the heat‐treatment conditions. Furthermore, the shell thickness and interior cavity of SPIO@Y₂O₃:Eu core–shell and yolk–shell nanostructures can be precisely tuned. Importantly, as‐prepared SPIO@Y₂O₃:Eu yolk–shell nanocapsules (NCs) modified with amino groups as cancer‐cell fluorescence imaging agents are also demonstrated. To the best of our knowledge, this is the first report on the selected‐control fabrication of uniform SPIO@Y₂O₃:Eu core–shell nanoparticles and yolk–shell NCs. The combined magnetic manipulation and optical monitoring of magnetic–fluorescent SPIO@Y₂O₃:Eu yolk–shell NCs will open up many exciting opportunities in dual imaging for targeted delivery and thermal therapy.     

Regioisomeric Effects on the Electronic Features of Indenothiophene‐Bridged D–π‐A′–A DSSC Sensitizers

Two D–π‐A′–A regioisomers (A‐IDT‐D and D‐IDT‐A) featuring 4,4′‐di‐p‐tolyl‐4 H‐indeno[1,2‐b]‐thiophene as a π linker (π) between the diarylamino donor (D) and the pyrimidine–cyanoacrylic acid acceptor (A′–A) have been successfully synthesized and characterized as efficient sensitizers for the dye‐sensitized solar cells (DSSCs). The different arrangements of the D and A′–A blocks on the unsymmetrical indenothiophene (IDT) core render the dipole of IDT being along (A‐IDT‐D) or opposite (D‐IDT‐A) to the direction of intramolecular (donor‐to‐acceptor) charge transfer, and thus induce variations in the physical properties. The experimental observations correlated well with the theoretical analyses, clearly revealing the trade‐off between the molar extinction coefficient (ε) and the S₀→S₁ transition energy. As a result, a superior ε value was observed for D‐IDT‐A, whereas a bathochromic shift in the absorption occurred in A‐IDT‐D. The larger ε value of D‐IDT‐A together with its more favorable energy level relative to TiO₂ led to a higher power conversion efficiency of 7.41 % for the D‐IDT‐A‐based DSSC, retaining approximately 95 % of the N719‐based DSSC efficiency. This work manifests the clear structure–property relationship for the case of donor and acceptor components being connected by an unsymmetrical π linker and provides insights for molecular engineering of organic sensitizers.     

Post‐Synthetic Modification of Zr‐Metal–Organic Frameworks through Cycloaddition Reactions

Cycloaddition reactions are highly attractive for post‐synthetic modification of metal–organic frameworks (MOFs). We report herein on cycloaddition reactions with PIZOF(R¹,R²)s, which are porous interpenetrated Zr‐based MOFs with Zr₆O₄(OH)₄(CO₂)₁₂ as the nodes and the dicarboxylates ^?O₂C[PE‐P(R¹,R²)‐EP]CO₂^? (P: phenylene, E: ethynylene; R¹, R²: side chains at the central phenylene unit) as the linkers. 1,3‐Dipolar cycloaddition between the pendant ethyne moieties of PIZOF(OMe,OCH₂C?CH) and 4‐methylbenzyl azide resulted in 98 % conversion of the ethyne groups. Reactions of PIZOF(OMe,O(CH₂)₃furan) with maleimide, N‐methylmaleimide, and N‐phenylmaleimide converted 98, 99, and 89 % of the furan moieties into the Diels–Alder adducts. However, no reaction occurred with maleic anhydride. High‐resolution ¹H NMR spectra were crucial in determining the conversion and identifying the reaction products. Of all the reagents (NaOD/D₂O, D₂SO₄, Bu₄NF, CsF, CsF/DCl, and KHF₂) tested for the disassembly of the PIZOFs in [D₆]DMSO, the combination of CsF and DCl was found to be the best. The disassembly at room temperature was fast (5–15 min), and after the addition of K₂CO₃ the ¹H NMR data were identical to those of the diacids (=protonated linkers) dissolved in pure DMSO. This allowed for simple structure elucidation through data comparison. CsF/DCl dissolves not only PIZOFs but also the hydrolytically very stable UiO‐66.     

Diels–Alder reaction of 2,7‐dichloroquinoline‐5,8‐dione with a thiazole o‐quinodimethane. Assignment of the regiochemistry by 1H–13C HMBC correlations

The Diels–Alder reaction between a thiazole o‐quinodimethane and 4,6‐dichloroquinoline‐5,8‐dione gave 6‐chloro‐9‐azaanthra[2,3‐b]thiazole‐5,10‐dione as a single regioisomer. Its structure was assigned by 2D ¹H–¹³C HMBC short‐ and long‐range correlations. Measuring the spectra in CF₃CO₂D indicated that both nitrogen atoms of pyridine and thiazole rings are deuterated. Copyright © 2001 John Wiley & Sons, Ltd.     

Stable second‐order nonlinear optical poly(amide–imide)/inorganic materials via simultaneous sequential self‐repetitive reaction and sol–gel process

A series of thermally stable organic/inorganic second‐order nonlinear optical (NLO) composites via sequential self‐repetitive reaction (SSRR) and sol–gel process has been developed. This SSRR is based on carbodiimide (CDI) chemistry. The difunctional azo chromophores (2,4‐diamino‐4′‐(4‐ nitrophenyl‐diazenyl)azobenzene (DNDA)) was reacted with excessive amount of 4, 4′‐methylene‐ diphenylisocyanate (MDI) to form poly‐CDI, and subsequently trimellitic anhydride (TMA) was added to obtain poly(N‐acylurea). The organic/inorganic composites containing prepolymer of phenyltriethoxysilane (PTEOS) and poly(N‐acylurea) in different weight ratios (10:90, 30:70, 50:50, 70:30, 90:10 wt%) were prepared, respectively. The moderate glass transition temperature (T_g) characteristic of the poly(N‐acylurea) allows the NLO‐active polymer to achieve high poling efficiency. After in situ poling and curing process, the T_gs of the composites were elevated, and higher than that of the pristine poly(amide–imide) sample. Electro‐optical (EO) coefficients (r₃₃) of about 5.5 ～ 18.0 pm/V at 830 nm were obtained. Excellent temporal stability at 100°C, and waveguide characteristics (3.1–4.2 dB/cm at 830 nm) were also obtained for these composites. Copyright © 2008 John Wiley & Sons, Ltd.     

Redox‐Active Metal–Organic Frameworks: Highly Stable Charge‐Separated States through Strut/Guest‐to‐Strut Electron Transfer

Molecular organization of donor and acceptor chromophores in self‐assembled materials is of paramount interest in the field of photovoltaics or mimicry of natural light‐harvesting systems. With this in mind, a redox‐active porous interpenetrated metal–organic framework (MOF), {[Cd(bpdc)(bpNDI)] ? 4.5 H₂O ? DMF}_n ( 1 ) has been constructed from a mixed chromophoric system. The μ‐oxo‐bridged secondary building unit, {Cd₂(μ‐OCO)₂}, guides the parallel alignment of bpNDI (N,N′‐di(4‐pyridyl)‐1,4,5,8‐naphthalenediimide) acceptor linkers, which are tethered with bpdc (bpdcH₂=4,4′‐biphenyldicarboxylic acid) linkers of another entangled net in the framework, resulting in photochromic behaviour through inter‐net electron transfer. Encapsulation of electron‐donating aromatic molecules in the electron‐deficient channels of 1 leads to a perfect donor–acceptor co‐facial organization, resulting in long‐lived charge‐separated states of bpNDI. Furthermore, 1 and guest encapsulated species are characterised through electrochemical studies for understanding of their redox properties.     

Metal‐Ion Metathesis in Metal–Organic Frameworks: A Synthetic Route to New Metal–Organic Frameworks

A porous metal–organic framework, Mn(H₃O)[(Mn₄Cl)₃(hmtt)₈] (POST‐65), was prepared by the reaction of 5,5′,10,10′,15,15′‐hexamethyltruxene‐2,7,12‐tricarboxylic acid (H₃hmtt) with MnCl₂ under solvothermal conditions. POST‐65(Mn) was subjected to post‐synthetic modification with Fe, Co, Ni, and Cu according to an ion‐exchange method that resulted in the formation of three isomorphous frameworks, POST‐65(Co/Ni/Cu), as well as a new framework, POST‐65(Fe). The ion‐exchanged samples could not be prepared by regular solvothermal reactions. The complete exchange of the metal ions and retention of the framework structure were verified by inductively coupled plasma–atomic emission spectrometry (ICP‐AES), powder X‐ray diffraction (PXRD), and Brunauer–Emmett–Teller (BET) surface‐area analysis. Single‐crystal X‐ray diffractions studies revealed a single‐crystal‐to‐single‐crystal (SCSC)‐transformation nature of the ion‐exchange process. Hydrogen‐sorption and magnetization measurements showed metal‐specific properties of POST‐65.     

Molecular level understanding of the role of aldehyde in vegetable‐aldehyde–collagen cross‐linking reaction

The role of formaldehyde (HCHO) in vegetable‐aldehyde–collagen cross‐linking reaction was investigated at the B3LYP/6‐31+G(d) level, where lysine (LYS) was used as model of collagen and catechin (EC) as model of condensed vegetable tannin. Atomic charge and Frontier molecular orbital analysis show that intermediates formed by HCHO reacting with LYS or EC, that is, M_LYS, M_EC‐6, and M_EC‐8, still have both nucleophilic and electrophilic sites, which are elements to form ternary cross‐linking in vegetable‐aldehyde–collagen system. The analysis of energy gap between HOMO (highest occupied molecular orbit) and LUMO (lowest unoccupied molecular orbit) indicate that the intermediate of HCHO–LYS residues (M_LYS) can further react with free HCHO to form product P‐N(CH₂OH)₂ (P‐N‐represents amino acid residue; N represents nitrogen atom on side chain), but the reaction of intermediate M_LYS with free EC is difficult to take place. So, the probability of forming ternary cross‐linking structure of amino acid residue–HCHO–EC is small, if HCHO is added before vegetable tannin in vegetable‐aldehyde–collagen system. However, the reactions of EC–HCHO intermediates (M_EC‐6 and M_EC‐8) with free amino acids, HCHO–amino acid residue intermediate (M_LYS), as well as with other EC–HCHO intermediates (M_EC‐6 and M_EC‐8), are very easy to take place. The reaction enthalpy also shows that the cross‐linking tendency is favorable in thermodynamics. So, it can be deduced that covalent cross‐linking among amino side chain of collagen and vegetable tannin may take place when aldehyde is added after vegetable tannin. In this way, a multiple point cross‐linking reaction occurs to create a high stabilization of collagen. © 2011 Wiley Periodicals, Inc.     

Synthesis of Novel Polycyclic Indole‐Annulated Thiopyranocoumarin Derivatives via Domino Knoevenagel–Hetero‐Diels–Alder Reaction in Aqueous Media

An efficient synthesis of polycyclic indole derivatives is achieved via domino Knoevenagel–hetero‐Diels–Alder reaction of O‐acrylated salicylaldehyde derivatives with dihydroindole‐2‐thiones in H₂O as solvent. The products are formed in good‐to‐excellent yields with high regio‐ and stereoselectivity.     

Chitosan Bio‐Based Organic–Inorganic Hybrid Aerogel Microspheres

Recently, organic–inorganic hybrid materials have attracted tremendous attention thanks to their outstanding properties, their efficiency, versatility and their promising applications in a broad range of areas at the interface of chemistry and biology. This article deals with a new family of surface‐reactive organic–inorganic hybrid materials built from chitosan microspheres. The gelation of chitosan (a renewable amino carbohydrate obtained by deacetylation of chitin) by pH inversion affords highly dispersed fibrillar networks shaped as self‐standing microspheres. Nanocasting of sol–gel processable monomeric alkoxides inside these natural hydrocolloids and their subsequent CO₂ supercritical drying provide high‐surface‐area organic–inorganic hybrid materials. Examples including chitosan–SiO₂, chitosan–TiO₂, chitosan–redox‐clusters and chitosan–clay‐aerogel microspheres are described and discussed on the basis of their textural and structural properties, thermal and chemical stability and their performance in catalysis and adsorption.