Preparation of multicomponent oxides via non-hydrolytic sol-gel routes from novel bimetallic alkoxides

New series of double alkoxides of erbium and its oxides have been prepared by non-hydrolytic sol-gel reactions for the first time. These compounds were characterized with the help of FT-IR, NMR, Mass, DTA-TGA and SEM. The mass spectra show similar types of fragmentation pattern in all compounds. The XRD diffraction pattern shows an enhanced homogeneity at high temperature. TGA/DTA measurements show that thermal decomposition occurs in steps and entirely depends on the chemical compositions and the synthesis routes. The SEM observation reveals a high dense and smooth microstructural uniformity of polycrystalline nature. The physico-chemical properties show that crystallization behaviors can be controlled with the help of fine-tuning the chemical properties of chelating agents in order to increase the solubility of metal alkoxides.     

Synthesis and Characterization of Fluoro- and Chloro- bimetallic Alkoxides as Precursors for Luminescent Metal Oxide Materials via Sol-Gel Technique

Heterobimetallic alkoxides are broadly recognized as versatile precursors for luminescence materials, and efforts are being made to develop novel routes by applying the concept of geometrical molecular design, for their synthesis and to design a single source precursor suited to photoluminescent materials. Novel and new series of bimetallic alkoxides has been prepared by metathesis route. They exhibit a lower sensitivity towards hydrolysis and so they are easier to handle as compared to other alkoxides. All the compounds were characterized by elemental analysis, FT-IR and multinuclear NMR spectroscopies. FT-IR revealed that the molecular structure of these metal alkoxides was retained to a large extent in 4 ： 1 halogenated alcohol-benzene solution. The heteronuclear NMR spectroscopy provided useful information about chemical shifts for better understanding the likely structure based on interactions with their coordinate metals. The mass spectra show similar types of fragmentation pattern. SEM-EDS analyses showed consistency with the formulation. XRD patterns show an enhanced homogeneity at high temperature. TGA measurements show that thermal decomposition occured in steps that depended entirely on the chemical compositions and the synthesis routes. SEM observation reveals that the morphology and particle size strongly depend on synthesis routes for their precursors.     

Synthesis,characterization and investigation of the thermal behaviour of six novel polynuclear cobalt and copper complexes for potential application in MOCVD

New tetranuclear complexes of copper and cobalt have been prepared under ambient conditions from corresponding metal acetates in acetone, using triethanolamine and diethanolamine as the ligands. The complexes have been characterized by infrared spectroscopy, mass spectroscopy, elemental analysis and thermal analysis. The mass spectra of the complexes show that the complexes retain the acetate moiety in their structures. Simultaneous thermogravimetric and differential thermal analysis (TGA–DTA) reveal that the complexes are solids that sublime over the temperature range 50–100 °C, under atmospheric pressure. The TGA–DTA curves reveal that the complexes retain carbon at temperatures as high as 500 °C. The presence of carbon is known to limit the mobility of growth species for oxides, restricting them to nanometersized crystals. Thus, the complexes have potential applications as precursors in the growth of nanostructured metal oxide thin films under specific CVD conditions. Because of their low sublimability, the complexes are prospective candidates as precursors for low‐temperature growth of multilayer oxide thin films where the thickness of individual layers needs to be controlled at nanometer level and for introducing dopants at low concentrations by MOCVD technique. Copyright © 2006 John Wiley & Sons, Ltd.     

Preparation and characterization of Cu (II) supported on poly(8‐hydroxyquinoline‐p‐styrene sulphonate) and its application as catalyst for the synthesis of hexahydroquinolines

Cu ( II ) supported on poly(8‐hydroxyquinoline‐p‐styrenesulfonate) (Cu ( II )@PHQSS) was prepared and fully characterized by the different techniques including fourier transform infrared spectroscopy (FT‐IR), ¹H NMR, ¹³C NMR, thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), differential thermal analysis (DTA), scanning electron microscope (SEM) and energy dispersive X‐ray analysis (EDS). Afterward, the Cu ( II )@PHQSS as nanostructured catalyst was used as catalyst for the synthesis of hexahydroquinolines.     

Synthesis,characterization, thermal,electrical and magnetic properties of polyaniline composites with rare earth gadolinium coordination complex

Novel polyaniline/gadolinium (PANI/Gd) composites were successfully synthesized by “in‐situ” polymerization at the presence of rare earth Gd coordination complex and D‐tartaric acid (an a dopant). It is rarely to find the studies on related field to add rare earth Gd coordination complex as fillers. Fourier transform infrared (FTIR) spectra, X‐ray diffraction (XRD) and scanning electron microscope (SEM) were used to examine the structure and surface appearance characterization of materials. The thermal stability performance of composites was investigated by thermogravimetry and derivative thermogravimetry (TG‐DTG). Electrochemical performance was measured by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge–discharge test. The magnetic property was investigated by physical property measurement system (PPMS). The structure and surface appearance characterization and the magnetic properties jointly demonstrate the polymerization of rare earth Gd coordination complex and PANI–D‐tartrate (DTA) not only simple physical mixing but also chemical mixing. TG‐DTG analysis suggests that thermal stability of PANI/Gd composites is higher than that of PANI–DTA. Electrochemical performance tests and SEM indicate that the composite (PANI/Gd = 3.3:1,mass ratio) has the most regular morphology and best specific capacitance. The magnetization of the composite (PANI/Gd = 3.3:1,mass ratio)is evidently smaller compared with PANI–DTA and rare earth Gd coordination complex. Copyright © 2016 John Wiley & Sons, Ltd.     

Characterization of herbal medicine with different particle sizes using pyrolysis GC/MS, SEM, and thermal techniques

Analytical techniques have been used to characterize compounds from herbal medicine, its products and extracts. The objective of this study was to characterize a variety of particle sizes of Erythrina velutina Willd powder. The samples used in the study were named MUF01 (710 μm), MUF03 (180 μm) and MUF05 (75 μm). The techniques employed were scanning electron microscopy (SEM), thermal analysis such as thermogravimetry (TG) and differential thermal analysis (DTA) together with pyrolysis coupled to gas chromatography/mass spectrometry (Pyr-GC/MS). SEM enabled us to detect the existence of divergences from the expected results from the granulometry process. Thermal analytical techniques (TG and DTA) showed the thermal decomposition profile, corresponding to physical and chemical phenomena. The chromatographic data relative to the peak area of the compounds analyzed evidenced quantitative differences in the chemical compositions of the samples MUF01, MUF03, and MUF05 at 300, 450 and 600 °C. Neophytadiene 2,6,10-trimethyl, 14 and 3-eicosyne were identified by Pyr-GC/MS at 300, 450 and 600 °C, and it classified the samples according the peak area values, which were MUF05 > MUF03 > MUF01. SEM, DTA and TG confirmed this through particle size uniformity, heat flow, and mass loss, respectively.     

Preparation and Characterizations of TiO2/Organically Modified Silane Composite Materials Produced by the Sol-Gel Method

TiO₂/organically modified silane (ORMOSIL) composite materials produced by the sol-gel method were studied for optical waveguide applications. High optical quality waveguiding films on different substrates, including silicon, gallium arsenide, silica/silicon substrates, and microscope glass slides, were prepared from high titanium content (0.2 molar) ÿ-glycidoxypropyltrimethoxysilane at low temperature. Scanning electron microscopy (SEM), atomic force microscopy (AFM), differential thermal analysis (DTA), thermal gravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) have been used to investigate the optical and structural properties of the composite films. The TGA/DTA results showed that the organic compounds in the film would tend to decompose in the temperature range from 200°C to 500°C. SEM and AFM results showed that a dense and porous-free composite material film could be obtained at the heat treatment temperature of 100°C. It was also shown that ORMOSIL is integrated in the glass, providing low shrinkage and high cracking resistance. The propagation loss properties of the composite films were also investigated. About 1.1 dB/cm propagation loss of the planar waveguide film was obtained at the wavelength of 633 nm.     

Promoting effect of group VI metals on Ni/MgO for catalytic growth of carbon nanotubes by ethylene chemical vapour deposition

The incorporation of 1 mass % of group VI metals (chromium, molybdenum, and tungsten) into 4 mass % of Ni/MgO catalysts was evaluated for the synthesis of carbon nanotubes (CNTs) by the catalytic chemical vapour deposition of ethylene. All materials were characterised by XRD, surface area, TEM, SEM, Raman spectroscopy, and TGA-DTA. The resulting data demonstrated that the addition of group VI metals improved the surface area and metal dispersion, thereby achieving a remarkable enhancement in catalytic growth activity. Among the metals of group VI, Mo was found to be the most effective promoter for catalysing the CNTs’ growth. From TEM observation, long CNTs with a higher degree of graphitization were obtained on the Ni-Mo/MgO catalyst. TGA and DTA analysis showed that the as-grown CNTs over both Ni-Mo and Ni-W/MgO catalysts exhibited higher thermal stability.     

Correlation between thermal and mass spectral techniques for the characterization of allenylidene and carbene complexes

The fragmentation pathways of allenylidene and carbene complexes have been studied using FAB mass spectrometry in comparison with thermal analyses (TGA, DrTG and DTA). Both the decomposition modes are investigated and the possible fragmentation pathways are suggested. The use of mass and thermal analyses (TGA and DTA) in the analyses of allenylidene and carbene complexes allowed the characterization of the fragmentation pathways in MS. The major pathway includes successive loss of carbon monoxide followed by fragmentation of the organic part of the allenylidene or carbene molecules. This is also confirmed by thermogravimetric analysis (TGA) where the first step involves the loss of carbon monoxide followed by the organic ligand. The nature of each step; exothermic or endothermic, is also studied using DTA technique. The kinetic parameters of the thermal decomposition are also studied using the Coates-Redfern method.     

Cu(II) immobilized on mesoporous organosilica as an efficient and reusable nanocatalyst for one‐pot Biginelli reaction under solvent‐free conditions

Cu(II) immobilized on mesoporous organosilica nanoparticles (Cu²⁺@MSNs‐(CO₂^?)₂) has been synthesized, as a inorganic–organic nanohybrid catalyst, through a post‐grafting approach. Its characterization is carried out by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Energy dispersive X‐ray (EDX), Thermogravimetric/differential thermal analyses (TGA‐DTA), and Nitrogen adsorption–desorption analysis. Cu²⁺@MSNs‐(CO₂^?)₂ exhibits high catalytic activity in the Biginelli reaction for the synthesis of a diverse range of 3, 4‐dihydropyrimidin‐2(1H)‐ones, under mild conditions. The anchored Cu(II) could not leach out from the surface of the mesoporous catalyst during the reaction and it has been reused several times without appreciable loss in its catalytic activity.     

Investigation of thermal and thermooxidative degradation of some polyimides containing oxyphenylene groups in the main chain

Data for thermogravimetric analyses of some polymides synthesized from diamines and dianhydrides containing various amounts of oxyphenylene groups have been used to show the effect of the chemical structure of polyimide on its thermooxidative stability. Two polyimides were taken as examples demonstrating the possibilites of combining the methods of thermal analysis (TGA, DTA and TVA) for studying the transformations of polyamic acids and polyimides over the temperature range 20–800°.     

Enhanced thermal properties and flame retardancy of unsaturated polyester‐based hybrid materials containing phosphorus and silicon

A phosphorus and silicon containing liquid monomer (9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide–vinyltrimethoxysilane (DOPO–VTS)) was synthesized by the reaction between DOPO and VTS. DOPO–VTS and methacryloxypropyltrimethoxylsilane were introduced into unsaturated polyester resin to prepare flame retardant UPR/SiO₂ (FR‐UPR/SiO₂) hybrid materials by sol–gel method and curing process. DOPO–VTS contributes excellent flame retardancy to UPR matrix, which was confirmed by the limiting oxygen index and microscale combustion calorimeter results. The thermogravimetric analysis (TGA) results indicate that the FR‐UPR/SiO₂ hybrid materials possess higher thermal stability and residual char yields than those of pure UPR at high temperature region. The thermal degradation of materials was investigated by TGA/infrared spectrometry (TG‐IR) and real‐time infrared spectrometry (RT‐IR), providing insight into the thermal degradation mechanism. Moreover, scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS) were used to explore the morphologies and chemical components of the residual char. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of 5-substituted 1H-tetrazoles and oxidation of sulfides by using boehmite nanoparticles/nickel-curcumin as a robust and extremely efficient green nanocatalyst

Nickel-anchored curcumin-functionalized boehmite nanoparticles (BNPs@Cur-Ni) as a robust and versatile nanocatalyst was synthesized and well-characterized by using Fourier transform infrared (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray mapping, thermogravimetric analysis (TGA), differential thermal analysis (DTA), Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), and inductively coupled plasma optical emission spectroscopy (ICP-OES). The synthesis of 5-substituted 1H-tetrazoles and the oxidation of sulfides were conducted by BNPs@Cur-Ni with excellent turnover number (TON) and turnover frequency (TOF) outcomes. Also, the catalyst was reused for several sequential runs without Ni leaching or decreasing in reaction yield. Utilizing the curcumin and boehmite with a natural source as well as poly(ethylene glycol) (PEG) as a solvent in this simple protocol can be based on green chemistry rules.     

One‐pot synthesis of organic–inorganic hybrid polyhedral oligomeric silsesquioxane microparticles in a double‐zone temperature controlled microfluidic reactor

Polyhedral oligomeric silsesquioxane (POSS) particles are one of the smallest organosilica nano‐cage structures with high multifunctionality that show both organic and inorganic properties. Until now poly(POSS) structures have been synthesized from beginning with a methacryl‐POSS monomer in free‐radical mechanism with batch‐wise methods that use sacrificial templates or additional multisteps. This study introduces a novel one‐pot synthesis inside a continuous flow, double temperature zone microfluidic reactor where the methodology is based on dispersion polymerization. As a result, spherical monodisperse POSS microparticles were obtained and characterized to determine their morphology, surface chemical structure, and thermal behavior by SEM, FTIR, and TGA, respectively. These results were also compared and reported with the outcomes of batch‐wise synthesis. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1396–1403     

A novel route to perovskite lead titanate from lead and titanium glycolates via the sol–gel process

Pure perovskite lead titanate powder (PbTiO₃) is successfully produced via the sol–gel process using lead and titanium glycolates as starting precursors and has been synthesized by the oxide one spot synthesis process. The obtained lead titanate is of the tetragonal form of the perovskite phase, with high purity and nearly zero moisture content. From high‐resolution mass spectra, the XRD technique, Raman‐FTIR and TGA‐DTA analysis, the lead–titanium glycolates undergo sol–gel transition through the formation of Pb? O? Ti bonds. From the SEM micrographs, the PbTiO₃ particle shape transforms from an agglomerate sphere to a needle and fiber‐like shapes as the calcination temperature is varied above T_c. The corresponding molecular structural transformation, from the tetragonal form to the cubic form, occurs at 430 °C. The lead titanate powder calcined at 300 °C for 3 h has the highest dielectric constant and electrical conductivity values, namely 17470 and 1.83 × 10^?3, respectively. Copyright © 2006 John Wiley & Sons, Ltd.     

High temperature phosphorylated or nonphosphorylated laminating resins based on maleimido-substituted aromatic s-triazines

Several new phosphorylated or nonphosphorylated maleimide or nadimide systems containing s-triazine rings were synthesized. Their synthesis was accomplished by simple methods utilizing readily available and relatively inexpensive starting materials. All polymer precursors were characterized by infrared (IR) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy. They were thermally polymerized to heat-resistant laminating resins. Thermal characterization of monomers and their cured resins was achieved using differential thermal analysis (DTA), dynamic thermogravimetric analysis (TGA) and isothermal gravimetric analysis (IGA). The cured resins were stable up to 304–330°C both in nitrogen and air atmospheres and formed anaerobic char yield 49–59% at 800°C. The phosphorylated polymers showed a lower temperature of initial weight loss but afforded higher anaerobic char yield than did the corresponding nonphosphorylated polymers. The thermal properties of the polymers were correlated with their chemical structure.     

Effect of boron containing materials on flammability and thermal degradation of polyamide‐6 composites containing melamine cyanurate

Three different boron containing materials, zinc borate (ZnB), borophosphate (BPO₄), and boron and silicon containing oligomer (BSi), were used to improve the flame retardancy of melamine cyanurate (MC) in a polyamide‐6 (PA‐6) matrix. The combustion and thermal degradation characteristics were investigated using limiting oxygen index (LOI), UL‐94 standard, thermogravimetric analysis‐Fourier transform infrared spectroscopy (TGA‐FTIR), differential scanning calorimeter (DSC), and scanning electron microscopy (SEM). All the three boron compounds showed no synergistic effect with MC, and only BPO₄ at high loadings showed comparable LOI values by increasing the dripping rate. For ZnB and BSi glassy film and char formation decreases the dripping rate and sublimation of melamine and give rise to low LOI. According to TGA‐FTIR results, addition of boron compounds does not alter the gaseous product distribution of both MC and PA‐6. The addition of boron compounds affects flame retardancy through physical means. It was noted from the TGA data that boron compounds reduced the decomposition temperature of both MC and PA‐6, also affecting the flame retardancy negatively by premature degradation of MC at low temperatures. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Novel Polyamines Containing Different Substitute Groups Via Chemical Oxidative Polymerization

In this study, polymers of substitute aromatic amine compounds were synthesized by chemical oxidative polycondensation in aqueous alkaline medium using NaOCl as oxidant. The structures of synthesized compounds were confirmed by FT‐IR, UV‐Vis and NMR analyses. The characterizations of synthesized compounds were made by fluorescence, TG‐DTA, DSC, scanning electron microscopy (SEM) and Brunauer‐Emmett‐Teller (BET) surface area measurements. In addition, electrochemical and electrical conductivity values of compounds were carried out with cyclic voltammetry (CV) and four points probe technique measurements, respectively. Synthesized polymers viewed structural change, optical, electrochemical and thermal differences.     

Thermal-Decomposition Chemistry of Modified Lead-Titanate Aquo-Diol Gels Used for the Preparation of Thin Films

Lead-titanate gels and thin films modified with calcium, lanthanum or samarium have been prepared by chemical solution deposition (CSD) methods. Lead acetate, titanium di-isopropoxide bis-acetylacetonate and 1,3-propanediol were used for the synthesis of Pb-Ti-sols. Calcium, lanthanum or samarium were added to these sols as acetates or nitrates dissolved in water. The solutions were dried to obtain the gels or spin-coated onto platinised silicon substrates to obtain the films. Thermal decomposition of the gels was followed by means of simultaneous thermogravimetric and differential-thermal analysis (TGA/DTA) coupled with evolved gas analysis (EGA). Infrared (IR) analysis of the gels helped to identify the compounds formed during the thermal decomposition. Crystal structure and microstructure of the films were observed by grazing incidence X-ray diffraction (GIXRD) and scanning electron microscopy (SEM). These analyses indicated that the structure and microstructure of the modified-lead-titanate thin films are related to the thermal decompositions of the corresponding gels. It was inferred from these studies that the decomposition sequence is linked to the type of modifier, Ca, La or Sm, and to the precursor salt (acetate or nitrate) used for the incorporation of the modifier into the Pb-Ti-sol.     

A novel nano‐cotton‐like bismuth oxyfluoride (NC‐BiOF) and a novel nanosheet heterogeneous compound BiOF@ZIF‐8 as catalyst for the selective and green oxidation of benzylic alcohols

We describe here for the first time a new morphology of BiOF nanoparticles with a cotton‐like structure, made using a hydrothermal synthesis method. We also prepared heterogeneous nanosheets of BiOF@ZIF‐8 by a one‐pot synthesis under hydrothermal conditions. We demonstrate that in this method the morphology of BiOF and one‐pot synthesis conditions are the main factors for the preparation of the nanosheet BiOF@ZIF‐8. Fourier transform infrared (FTIR), X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy‐dispersive X‐ray (EDX), thermogravimetry‐differential thermal analysis (TG‐DTA), and BET surface area were used to characterize the samples prepared. XRD, SEM, and adsorption–desorption analysis showed that the structure of ZIF‐8 and BiOF form intact only in one‐pot synthesis of BiOF (with nano‐cotton‐like morphology) with Zn(NO₃)₃, while spectral techniques show the successful encapsulation of the sheet BiOF on ZIF‐8. Nanosheet BiOF@ZIF‐8 was found to be a highly efficient heterogeneous catalyst for the selective oxidation of alcohols. BiOF@ZIF‐8 could be reused several times although it got less active with recycling.