Reactions of Alkynes with [RuCl(cyclopentadienyl)] Complexes: The Important First Steps

Cyclopentadienyl–ruthenium half‐sandwich complexes with η²‐bound alkyne ligands have been suggested as catalytic intermediates in the early stages of Ru‐catalyzed reactions with alkynes. We show that electronically unsaturated complexes of the formula [RuCl(Cp^)(η²‐RC≡CR′)] can be stabilized and crystallized by using the sterically demanding cyclopentadienyl ligand Cp^ (Cp^=η⁵‐1‐methoxy‐2,4‐tert‐butyl‐3‐neopentyl‐cyclopentadienyl). Furthermore we demonstrate that [RuCl₂(Cp^)]₂ is an active and regioselective catalyst for the [2+2+2] cyclotrimerization of alkynes. The first elementary steps of the reaction of mono(η²‐alkyne) complexes containing {RuCl(Cp*)} (Cp*=η⁵‐C₅Me₅) and {RuCl(Cp^)} fragments with alkynes were investigated by DFT calculations at the M06/6‐31G* level in combination with a continuum solvent model. Theoretical results are able to rationalize and complement the experimental findings. The presence of the sterically demanding Cp^ ligand increases the activation energy required for the formation of the corresponding di(η²‐alkyne) complexes, enhancing the initial regioselectivity, but avoiding the evolution of the system towards the expected cyclotrimerization product when bulky substituents are present. Theoretical results also show that the electronic structure and stability of a metallacyclic intermediate is strongly dependent on the nature of the substituents present in the alkyne.     

Syntheses and Anti—inflammatory Actiobn of （η—C5H5）2Ti （Cin）2 and （η—C5H5）2Ti（Tzea）2

Two new Complexes(Cp)2Ti(Cin)2and (CP2)Ti(Tzea)2(CP=Cyclopentadienyl η^5-C5H5)have been synthesized in THF by the reaction of HCin(Cincofen,2-phenylquinoline-4-carboxylic acid)or HTzea(5-phenyltetrazolyl-2-ethanoic acid)with(Cp)2TiCl2,and characterized by elemental analyses,IR,1H NMR and 13C NMR,UV spectra,molar conductivity,TGDTA.In the complexes the carboxyl groups are coordinated to Ti(IV)in a monodentate manner,The inhibitory actions of the complexes on mice ear tumefaction caused by croton oil and the rat foot granulation growth produced by cotton wool are higher than those of the corresponding ligands HCin,HTzea and [(Cp)2TiCl2],while their toxicities are lower than those of the free ligands.ηη     

Zur Reaktivität von Titanocenkomplexen [Ti(Cp′)2(η2‐Me3SiC≡CSiMe3)] (Cp′ = Cp,Cp*) gegenüber Benzoldicarbonsäuren

On the Reactivity of Titanocene Complexes [Ti(Cp′)₂(η²‐Me₃SiC≡CSiMe₃)] (Cp′ = Cp, Cp*) towards Benzenedicarboxylic Acids Titanocene complexes [Ti(Cp′)₂(BTMSA)] ( 1a , Cp′ = Cp = η⁵‐C₅H₅; 1b , Cp′ = Cp* = η⁵‐C₅Me₅; BTMSA = Me₃SiC≡CSiMe₃) were found to react with iodine and methyl iodide yielding [Ti(Cp′)₂(μ‐I)₂] ( 2a / b ; a refers to Cp′ = Cp and b to Cp′ = Cp*), [Ti(Cp′)₂I₂] ( 3a / b ) and [Ti(Cp′)₂(Me)I] ( 4a / b ), respectively. In contrast to 2a , complex 2b proved to be highly moisture sensitive yielding with cleavage of HCp* [{Ti(Cp*)I}₂(μ‐O)] ( 7 ). The corresponding reactions of 1a / b with p‐cresol and thiophenol resulted in the formation of [Ti(Cp′)₂{O(p‐Tol)}₂] ( 5a / b ) and [Ti(Cp′)₂(SPh)₂] ( 6a / b ), respectively. Reactions of 1a and 1b with 1,n‐benzenedicarboxylic acids (n = 2–4) resulted in the formation of dinuclear titanium(III) complexes of the type [{Ti(Cp′)₂}₂{μ‐1,n‐(O₂C)₂C₆H₄}] (n = 2, 8a / b ; n = 3, 9a / b ; n = 4, 10a / b ). All complexes were fully characterized analytically and spectroscopically. Furthermore, complexes 7 , 8b , 9a ·THF, 10a / b were also be characterized by single‐crystal X‐ray diffraction analyses.     

Synthesis and Structural Characterization of New Zirconium(IV) Bent Metallocenes comprising η8‐Cyclooctatetraenyl and Bulky Cyclopentadienyl Ligands

The new zirconium bent metallocenes (COT)Zr(Cp^tBu2)Cl ( 1 ) and (COT)Zr(Cp′′)Cl ( 2 ) were synthesized in a straightforward manner and in high yields ( 1 : 91 %, 2 : 86 %) by treatment of in situ‐prepared (COT)ZrCl₂(THF) with 1 equiv. of K(Cp^tBu2) or K(Cp′′), respectively (COT = η⁸‐cyclooctatetraenyl; Cp^tBu2 = η⁵‐1,3‐di‐tert‐butylcyclopentadienyl; Cp′′ = η⁵‐1,3‐bis(trimethylsilyl)cyclopentadienyl). Subsequent reaction of 1 with 1 equiv. of phenyllithium afforded the σ‐phenyl derivative (Cp^tBu2)Zr(COT)Ph ( 3 ) as orange crystals in 83 % isolated yield. All three new compounds were structurally characterized through single‐crystal X‐ray diffraction.     

η4‐HBCC‐σ,π‐Borataallyl Complexes of Ruthenium Comprising an Agostic Interaction

Thermolysis of [Cp*Ru(PPh₂(CH₂)PPh₂)BH₂(L₂)] 1 (Cp*=η⁵‐C₅Me₅; L=C₇H₄NS₂), with terminal alkynes led to the formation of η⁴‐σ,π‐borataallyl complexes [Cp*Ru(μ‐H)B{R‐C=CH₂}(L)₂] ( 2 a – c ) and η²‐vinylborane complexes [Cp*Ru(R‐C=CH₂)BH(L)₂] ( 3 a – c ) ( 2 a , 3 a : R=Ph; 2 b , 3 b : R=COOCH₃; 2 c , 3 c : R=p‐CH₃‐C₆H₄; L=C₇H₄NS₂) through hydroboration reaction. Ruthenium and the HBCC unit of the vinylborane moiety in 2 a – c are linked by a unique η⁴‐interaction. Conversions of 1 into 3 a – c proceed through the formation of intermediates 2 a – c . Furthermore, in an attempt to expand the library of these novel complexes, chemistry of σ‐borane complex [Cp*RuCO(μ‐H)BH₂L] 4 (L=C₇H₄NS₂) was investigated with both internal and terminal alkynes. Interestingly, under photolytic conditions, 4 reacts with methyl propiolate to generate the η⁴‐σ,π‐borataallyl complexes [Cp*Ru(μ‐H)BH{R‐C=CH₂}(L)] 5 and [Cp*Ru(μ‐H)BH{HC=CH‐R}(L)] 6 (R=COOCH₃; L=C₇H₄NS₂) by Markovnikov and anti‐Markovnikov hydroboration. In an extension, photolysis of 4 in the presence of dimethyl acetylenedicarboxylate yielded η⁴‐σ,π‐borataallyl complex [Cp*Ru(μ‐H)BH{R‐C=CH‐R}(L)] 7 (R=COOCH₃; L=C₇H₄NS₂). An agostic interaction was also found to be present in 2 a – c and 5 – 7 , which is rare among the borataallyl complexes. All the new compounds have been characterized in solution by IR, ¹H, ¹¹B, ¹³C NMR spectroscopy, mass spectrometry and the structural types were unequivocally established by crystallographic analysis of 2 b , 3 a – c and 5 – 7 . DFT calculations were performed to evaluate possible bonding and electronic structures of the new compounds.     

Versatile reactivity of half-sandwich Ir and Rh complexes toward carboranylamidinates and their derivatives: synthesis, structure, and catalytic activity for norbornene polymerization

Synthesis, structure, and reactivity of carboranylamidinate‐based half‐sandwich iridium and rhodium complexes are reported for the first time. Treatment of dimeric metal complexes [{Cp*M(μ‐Cl)Cl}₂] (M=Ir, Rh; Cp*=η⁵‐C₅Me₅) with a solution of one equivalent of nBuLi and a carboranylamidine produces 18‐electron complexes [Cp*IrCl(Cab^N‐DIC)] ( 1 a ; Cab^N‐DIC=[iPrN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHiPr)]), [Cp*RhCl(Cab^N‐DIC)] ( 1 b ), and [Cp*RhCl(Cab^N‐DCC)] ( 1 c ; Cab^N‐DCC=[CyN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHCy)]). A series of 16‐electron half‐sandwich Ir and Rh complexes [Cp*Ir(Cab^N′‐DIC)] ( 2 a ; Cab^N′‐DIC=[iPrN?C(closo‐1,2‐C₂B₁₀H₁₀)(NiPr)]), [Cp*Ir(Cab^N′‐DCC)] ( 2 b , Cab^N′‐DCC=[CyN?C(closo‐1,2‐C₂B₁₀H₁₀)(NCy)]), and [Cp*Rh(Cab^N′‐DIC)] ( 2 c ) is also obtained when an excess of nBuLi is used. The unexpected products [Cp*M(Cab^N,S‐DIC)], [Cp*M(Cab^N,S‐DCC)] (M=Ir 3 a , 3 b ; Rh 3 c , 3 d ), formed through BH activation, are obtained by reaction of [{Cp*MCl₂}₂] with carboranylamidinate sulfides [RN?C(closo‐1,2‐C₂B₁₀H₁₀)(NHR)]S^? (R=iPr, Cy), which can be prepared by inserting sulfur into the C? Li bond of lithium carboranylamidinates. Iridium complex 1 a shows catalytic activities of up to 2.69×10⁶ g_PNB ${{\rm{mol}}_{{\rm{Ir}}}^{ - {\rm{1}}} }Synthesis, structure, and reactivity of carboranylamidinate-based half-sandwich iridium and rhodium complexes are reported for the first time. Treatment of dimeric metal complexes [{Cp*M(μ-Cl)Cl}(2)] (M = Ir, Rh; Cp* = η(5)-C(5)Me(5)) with a solution of one equivalent of nBuLi and a carboranylamidine produces 18-electron complexes [Cp*IrCl(Cab(N)-DIC)] (1?a; Cab(N)-DIC = [iPrN=C(closo-1,2-C(2)B(10)H(10))(NHiPr)]), [Cp*RhCl(Cab(N)-DIC)] (1?b), and [Cp*RhCl(Cab(N)-DCC)] (1?c; Cab(N)-DCC = [CyN=C(closo-1,2-C(2)B(10)H(10))(NHCy)]). A series of 16-electron half-sandwich Ir and Rh complexes [Cp*Ir(Cab(N')-DIC)] (2?a; Cab(N')-DIC = [iPrN=C(closo-1,2-C(2)B(10)H(10))(NiPr)]), [Cp*Ir(Cab(N')-DCC)] (2?b, Cab(N')-DCC = [CyN=C(closo-1,2-C(2)B(10)H(10)(NCy)]), and [Cp*Rh(Cab(N')-DIC)] (2?c) is also obtained when an excess of nBuLi is used. The unexpected products [Cp*M(Cab(N,S)-DIC)], [Cp*M(Cab(N,S)-DCC)] (M = Ir 3?a, 3?b; Rh 3?c, 3?d), formed through BH activation, are obtained by reaction of [{Cp*MCl(2)}(2)] with carboranylamidinate sulfides [RN=C(closo-1,2-C(2)B(10)H(10))(NHR)]S(-) (R = iPr, Cy), which can be prepared by inserting sulfur into the C-Li bond of lithium carboranylamidinates. Iridium complex 1?a shows catalytic activities of up to 2.69×10(6) g(PNB) mol(Ir)(-1) h(-1) for the polymerization of norbornene in the presence of methylaluminoxane (MAO) as cocatalyst. Catalytic activities and the molecular weight of polynorbornene (PNB) were investigated under various reaction conditions. All complexes were fully characterized by elemental analysis and IR and NMR spectroscopy; the structures of 1?a-c, 2?a, b; and 3?a, b, d were further confirmed by single crystal X-ray diffraction.     

Strukturen von polaren Magnesiumorganylen: Synthese und Struktur von Basen‐Addukten des Bis(cyclopentadienyl)magnesiums

Structures of Polar Magnesium Organyls: Synthesis and Structure of Base Adducts of Bis(cyclopentadienyl)magnesium Eight donor‐acceptor complexes of bis(cyclopentadienyl)magnesium ( 1 ) with N‐ and O‐donor Lewis bases have been synthesized and characterized by X‐ray structure analysis. With acetonitrile, dimethoxyethane, diethyleneglycoldimethylether, dioxane, and tetramethylethylenediamine simple 1:1 adducts are formed ( 2 – 6 ). In some cases a change of the hapticity of one cyclopentadienylring from η⁵ to η² or η¹ is observed ( 4 – 6 ). In the adduct with pentamethyldiethylenetriamine ( 7 ) one C₅H₅‐ring is removed from the magnesium atom forming the cation [Mg(C₅H₅)(PMDTA)]⁺ and an uncoordinated five‐ring anion. With the crown ether 15‐crown‐5 the two ionic Mg compounds 8 and 9 are formed which have a [Mg(15‐crown‐5)L₂]²⁺‐cation [L = pyridine, THF] and two uncoordinated cyclopentadienyl anions. Cyclopentadienyl‐methyl‐magnesium reacts with 15‐crown‐5 to the salt [Mg(CH₃)(15‐crown‐5)]⁺ C₅H₅^? ( 10 ) which has also a free cyclopentadienyl anion.     

Reactions of Group 4 Metallocene Complexes with Mono‐ and Diphenylacetonitrile: Formation of Unusual Four‐ and Six‐Membered Metallacycles

Reactions of Group 4 metallocene alkyne complexes [Cp′₂M(η²‐Me₃SiC₂SiMe₃)] ( 1 : M=Zr, Cp′=Cp*=η⁵‐pentamethylcyclopentadienyl; 2 a : M=Ti, Cp′=Cp*, and 2 b : M=Ti, Cp′₂=rac‐(ebthi)=rac‐1,2‐ethylene‐1,1′‐bis(η⁵‐tetrahydroindenyl)) with diphenylacetonitrile (Ph₂CHCN) and of the seven‐membered zirconacyclocumulene 3 with phenylacetonitrile (PhCH₂CN) were investigated. Different compounds were obtained depending on the metal, the cyclopentadienyl ligand and the reaction temperature. In the first step, Ph₂CHCN coordinated to 1 to form [Cp*₂Zr(η²‐Me₃SiC₂SiMe₃)(NCCHPh₂)] ( 4 ). Higher temperatures led to elimination of the alkyne, coordination of a second Ph₂CHCN and transformation of the nitriles to a keteniminate and an imine ligand in [Cp*₂Zr(NC₂Ph₂)(NCHCHPh₂)] ( 5 ). The conversion of 4 to 5 was monitored by using ¹H NMR spectroscopy. The analogue titanocene complex 2 a eliminated the alkyne first, which led directly to [Cp*₂Ti(NC₂Ph₂)₂] ( 6 ) with two keteniminate ligands. In contrast, the reaction of 2 b with diphenylacetonitrile involved a formal coupling of the nitriles to obtain the unusual four‐membered titanacycle 7 . An unexpected six‐membered fused zirconaheterocycle ( 8 ) resulted from the reaction of 3 with PhCH₂CN. The molecular structures of complexes 4 , 5 , 6 , 7 and 8 were determined by X‐ray crystallography.     

Pentafulvenkomplexe des Titans — Synthese,Struktur und Fluktuierendes Verhalten von Cp′Ti{η6‐C5H4=C(p‐Tol)2}Cl (Cp′ = Cp*, Cp)

Complexes of Titanium — Synthesis, Structure, and Fluxional Behaviour of CpTi{η⁶‐C₅H₄=C(p‐Tol)₂}Cl (Cp′ = Cp*, Cp) The reaction of Cp′TiCl₃ (C′ = Cp* or Cp) with magnesium and 6, 6‐di‐para‐tolylpentafulvene generates good yields of pentafulvene complexes Cp*Ti{η⁶‐C₅H₄=C(p‐Tol)₂}Cl ( 4 ) and CpTi{η⁶‐C₅H₄=C(p‐Tol)₂}Cl ( 5 ), respectively. The crystal and molecular structure of 4 have been determined from X‐ray data and exhibits compared to known η⁶‐pentafulvene complexes an unusual large Ti—C(p‐Tol)₂ (Fv)‐distance (2.535(5)Å) evoked by the bulky substituents at the exocyclic carbon. Dynamic ¹H‐NMR and spin saturation transfer experiments point out a rotation of the fulvene ligand around the Ti—Ct2 axis (Ct2 = centroid of the fulvene ring carbon atoms) with an activation barrier ΔG^≠_C = 60.6 ± 0.5 kJ mol⁻¹ (T_C = 314 ± 2 K). For 5 this barrier is significantly larger. Analogous dynamic behaviour is well known for diene complexes, but to our knowledge, it is here first‐time described for a pentafulvene complex.     

Insertions‐ und Substitutionsreaktion von Ameisensäuremethylester mit [Cp′2ZrCl(PHTipp)] – Molekülstruktur von meso‐trans‐[Cp′2ZrCl{OCH(PHTipp)2}] (Cp′ = η5‐C5MeH4, Tipp = 2,4,6‐Pri3C6H2)

Insertion and Substitution Reaction of Methyl Formate with [Cp′₂ZrCl(PHTipp)] – Molecular Structure of meso‐trans ‐[Cp′₂ZrCl{OCH(PHTipp)₂}] (Cp′ = η⁵‐C₅MeH₄, Tipp = 2,4,6‐Prⁱ₃C₆H₂) [Cp′₂ZrCl(PHTipp)] ( 1 ) (Cp′ = η⁵‐C₅MeH₄, Tipp = 2,4,6‐Prⁱ₃C₆H₂) reacts with methyl formate with insertion and substitution to give [Cp′₂ZrCl{OCH(PHTipp)₂}] ( 2 ). 2 was characterized spectroscopically (¹H, ³¹P NMR, IR, MS) and by X‐ray structure determination. Only the meso‐trans isomer is present in the solid state.     

Preparation and characterization of mono-cyclopentadienylvanadium dihalide bis-phosphine complexes; crystal structure of (η5-C5H5)VCL2(PMe3)2

Mono-cyclopentadienyl complexes CpVX₂(PR₃)₂ and Cp′VX₂ (PR₃)₂ (Cp = η⁵- C₅H₅; Cp′ = η⁵-C₅H₄Me; R = Me, Et; X = Cl, Br) have been prepared by reaction of VX₃(PR₃)₂ with CpM (M = Na, T1, SnBuⁿ3, 1/2 Mg) or Cp′Na. Attempts to prepare analogous complexes with other phosphine ligands, PPh₃, PPh₂ Me, PPhMe₂, Pcy₃, DMPE and DPPE failed. Reduction of CpVCl₂(PEt₃)₂ with zinc or aluminium under CO (1 bar) offers a simple method for the preparation of CpV(CO)₃(PEt₃). The crystal structure of the trimethylphosphine complex CpVCl₂(PMe₃)₂ is reported.     

A hydrogen-1 nuclear magnetic resonance,mass spectral and extended Hückel study of some olefin complexes of rhodium(I) and iridium(I) and the crystal and molecular structure of η4-2,4-dimethylpenta-1,4-diene(η5-formylcyclopentadienyl)rhodium(I)

A ¹H NMR study of monosubstituted η-cyclopentadienyl-rhodium(I) complexes of type LLRh(C₅H₄X) and -iridium(I) complexes of type L₂Ir(C₅H₄X) (L = ethene, LL = 1,3- or 1,5-diolefin; X = C(C₆H₅)₃, CHO, or COOCH₃) has been carried out. For complexes of both metals in which the neutral ligand is ethene or a non-conjugated diolefin the NMR spectra of the cyclopentadienyl protons are unusual in that H(2), H(5) resonate to high field either at room temperature or below.The corresponding NMR spectra for the cyclopentadienyl ring protons of complexes where the neutral ligand is a conjugated diene are, with one exception, normal.A single crystal X-ray structural analysis of (η⁴-2,4-dimethylpenta-1,4-diene)(η⁵-formylcyclopentadienyl)rhodium(I) (which exhibits an abnormal ¹H NMR spectrum) reveals substantial localisation of electron density in the C(3)C(4) Cp ring bond (1.283(33) Å) which may be consistent with a contribution from an ‘allyl-ene’ rotamer to the ring—metal bonding scheme. An extended Hückel calculation with self consistent charge iteration was performed on this complex.The results predict a greater Mulliken overlap population for the C(3)C(4) bond in the cyclopentadienyl ring and show that the localisation is dependent on both the Cp ring substituent and the nature of the diolefin. The mass spectral fragmentation patterns of some representative diene complexes of iridium(I) and rhodium(I) are presented.     

Chemistry of N,S‐Heterocyclic Carbene and Metallaboratrane Complexes: A New η3‐BCC‐Borataallyl Complex

A high‐yielding synthetic route for the preparation of group 9 metallaboratrane complexes [Cp*MBH(L)₂], 1 and 2 ( 1 , M=Rh, 2 , M=Ir; L=C₇H₄NS₂) has been developed using [{Cp*MCl₂}₂] as precursor. This method also permitted the synthesis of an Rh–N,S‐heterocyclic carbene complex, [(Cp*Rh)(L₂)(1‐benzothiazol‐2‐ylidene)] ( 3 ; L=C₇H₄NS₂) in good yield. The reaction of compound 3 with neutral borane reagents led to the isolation of a novel borataallyl complex [Cp*Rh(L)₂B{CH₂C(CO₂Me)}] ( 4 ; L=C₇H₄NS₂). Compound 4 features a rare η³‐interaction between rhodium and the B‐C‐C unit of a vinylborane moiety. Furthermore, with the objective of generating metallaboratranes of other early and late transition metals through a transmetallation approach, reactions of rhoda‐ and irida‐boratrane complexes with metal carbonyl compounds were carried out. Although the objective of isolating such complexes was not achieved, several interesting mixed‐metal complexes [{Cp*Rh}{Re(CO)₃}(C₇H₄NS₂)₃] ( 5 ), [Cp*Rh{Fe₂(CO)₆}(μ‐CO)S] ( 6 ), and [Cp*RhBH(L)₂W(CO)₅] ( 7 ; L=C₇H₄NS₂) have been isolated. All of the new compounds have been characterized in solution by mass spectrometry, IR spectroscopy, and ¹H, ¹¹B, and ¹³C NMR spectroscopies, and the structural types of 4 – 7 have been unequivocally established by crystallographic analysis.     

Reaktivität der M-M-mehrfachbindung in metallcarbonyl-derivaten: VII. Aktivierung von carbodiimiden durch [η-C5H5(CO)2Mo]2 als μ(η1:η2) ligand unter erhalt der Mo—Mo-Dreifachbindung

The reaction of Cp(CO)₂MoMo(CO)₂Cp (Cp = η-C₅H₅) with an excess of carbodiimides RN=C=NR′ results in the substitution of two carbonyl groups to give the new asymmetrically bridged complexes Cp₂(CO)₂Mo₂μ(η¹:η²-RN=C=NR′) with Cp₂(CO)₄Mo₂μ(η¹:η²-CNR) complexes as by products.     

Variable Bonding Modes of Pyrimidine‐2‐thione in PdII/PtII Complexes [M(η2‐N,S‐pymS)(η1‐S‐pymS)(PPh3)] and [M(η1‐S‐pymS)2(L‐L)] (L‐L = dppm,dppe)

Reactions of pyrimidine‐2‐thione (HpymS) with Pd^II/Pt^IV salts in the presence of triphenyl phosphine and bis(diphenylphosphino)alkanes, Ph₂P‐(CH₂)_m‐PPh₂ (m = 1, 2) have yielded two types of complexes, viz. a) [M(η²‐N, S‐ pymS)(η¹‐S‐ pymS)(PPh₃)] (M = Pd, 1 ; Pt, 2 ), and (b) [M(η¹‐S‐pymS)₂(L‐L)] {L‐L, M = dppm (m = 1) Pd, 3 ; Pt, 4 ; dppe (m = 2), Pd, 5 ; Pt, 6 }. Complexes have been characterized by elemental analysis (C, H, N), NMR spectroscopy (¹H, ¹³C, ³¹P), and single crystal X‐ray crystallography ( 1 , 2 , 4 , and 5 ). Complexes 1 and 2 have terminal η¹‐S and chelating η²‐N, S‐modes of pymS⁻, while other Pd/Pt complexes have only terminal η¹‐S modes. The solution state ³¹P NMR spectral data reveal dynamic equilibrium for the complexes 3 , 5 and 6 , whereas the complexes 1 , 2 and 4 are static in solution state.     

The syndiospecific polymerization of styrene in the presence of fluorine‐containing half‐sandwich metallocenes

The syndiospecific polymerization of styrene was investigated with the fluorine‐containing half‐sandwich complexes η⁵‐pentamethylcyclopentadienyl titanium bis(trifluoroacetate) dimer, η⁵‐octahydrofluorenyl titanium tristrifluoro‐acetate, η⁵‐octahydrofluorenyl titanium dimethoxymonotrifluoroacetate, and η⁵‐octahydrofluorenyl titanium tris(pentafluorobenzoate) in comparison to known chloride and methoxide complexes in the presence of relatively low amounts of methylalumoxane and triisobutylaluminum. After the selection of effective reaction conditions for a solvent‐free polymerization, the following orders of decreasing polymerization activity of the titanium complexes can be observed: for pentamethylcyclopentadienyl compounds, Cp*Ti(OMe)₃ > [Cp*Ti(OCOCF₃)₂]₂O ≈ Cp*TiCl₃, and for octahydrofluorenyl compounds, [656]Ti(OMe)₃ > [656]Ti(OCOC₆F₅)₃ > [656]Ti(OCH₃)₂(OCOCF₃) > [656]Ti (OCOCF₃)₃. The [656]Ti complexes, showing the highest polymerization conversions at 70 °C and in comparison with the Cp* Ti compounds, turned out to be highly efficient catalysts for the syndiospecific styrene polymerization. The fluorine‐containing Cp* and [656]Ti complexes lead to much higher molecular weights than the chloride and methoxide compounds because of a reduction in chain‐limiting transfer reactions. The introduction of only one fluorine‐containing ligand into the coordination sphere of the metal compound is obviously sufficient for a significant increase in molecular weight. The active polymerization sites of the [656]Ti complexes with methylalumoxane and triisobutylaluminum are extremely stable during storage at room temperature in regard to their polymerization activity. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2428–2439, 2000     

Metalated 1, 3‐Azaphospholes: η1‐(1H‐1, 3‐Benzazaphosphole‐P)M(CO)5 and μ2‐[(1, 3‐Benzazaphospholide‐P)(cyclopentadienide)nickel] Complexes

1H‐1, 3‐Benzazaphospholes react with M(CO)₅(THF) (M = Cr, Mo, W) to give thermally and relatively air stable η¹‐(1H‐1, 3‐Benzazaphosphole‐P)M(CO)₅ complexes. The ¹H‐ and ¹³C‐NMR‐data are in accordance with the preservation of the phosphaaromatic π‐system of the ligand. The strong upfield ³¹P coordination shift, particularly of the Mo and W complexes, forms a contrast to the downfield‐shifts of phosphine‐M(CO)₅ complexes and classifies benzazaphospholes as weak donor but efficient acceptor ligands. Nickelocene reacts as organometallic species with metalation of the NH‐function. The resulting ambident 1, 3‐benzazaphospholide anions prefer a μ₂‐coordination of the η⁵‐CpNi‐fragment at phosphorus to coordination at nitrogen or a η³‐heteroallyl‐η⁵‐CpNi‐semisandwich structure. This is shown by characteristic NMR data and the crystal structure analysis of a η⁵‐CpNi‐benzazaphospholide. The latter is a P‐bridging dimer with a planar Ni₂P₂ ring and trans‐configuration of the two planar heterocyclic phosphido ligands arranged perpendicular to the four‐membered ring.     

Reactions of 2‐Substituted Pyridines with Titanocenes and Zirconocenes: Coupling versus Dearomatisation

Reactions of group 4 metallocene sources with 2‐substituted pyridines were investigated to evaluate their coordination type between innocent and reductive dearomatisation as well as to probe the possibility for couplings. A dependence on the cyclopentadienyl ligands (Cp, Cp*), the metals (Ti, Zr), and the substrates (2‐phenyl‐, 2‐acetyl‐, and 2‐iminopyridine) was observed. While 2‐phenylpyridine is barely reactive, 2‐acetylpyridine reacts vigorously with the Cp‐substituted complexes and selectively with their Cp* analogues. With 2‐iminopyridine, in all cases selective reactions were observed. In the isolated [Cp₂Ti], [Cp₂Zr], and [Cp*₂Zr] compounds the substrate coordinates by its pyridyl ring and the unsaturated side‐chain. Subsequently, the pyridine was dearomatised, which is most pronounced in the [Cp*₂Zr] compounds. Using [Cp*₂Ti] leads to the unexpected paramagnetic complexes [Cp*₂Ti^III(N,O‐acpy)] and [Cp*₂Ti^III(N,N′‐impy)]. This highlights the non‐innocent character of the pyridyl substrates.     

Latest News: Reactions of Group 4 Bis(trimethylsilyl)acetylene Metallocene Complexes and Applications of the Obtained Products

Recently published reactions of group 4 metallocene bis(trimethylsilyl)acetylene (btmsa) complexes from the last two years are reviewed. Complexes like Cp’₂Ti(η²-Me₃SiC₂SiMe₃) and Cp₂Zr(py)(η²-Me₃SiC₂SiMe₃) with Cp’ as Cp (cyclopentadienyl) and Cp* (pentamethylcyclopentadienyl) have been considered (py=pyridine). These complexes can liberate a reactive low-valent titanium or zirconium center by dissociation of the ligands and act as ‘‘masked’’ M^II complexes (M=Ti, Zr). They represent excellent sources for the clean generation of the reactive coordinatively and electronically unsaturated complex fragments [Cp’₂M]. This is the reason why they were used for many synthetic and catalytic reactions during the last years. As an update to several review articles on this topic, this contribution provides an update with recent examples of preparative organometallic and organic chemistry of these complexes, acting as reagents for a wide range of coordinating and coupling reactions. In addition, applications and investigations concerning reaction products derived from this chemistry are mentioned, too.     

Hoop‐Shaped Condensed Aromatic Systems: Synthesis and Structure of Iron– and Ruthenium–Hepta(organo)[60]fullerene Complexes

Potassium reduction of iron– and ruthenium–penta(organo)[60]fullerene complexes, [M(η⁵‐C₆₀R₅)(η⁵‐Cp)] ( 1 a : M=Fe, R=Ph; 1 b : M=Fe, R=Me; 1 c : M=Ru, R=Ph; 1 d : M=Ru, R=Me; Cp=C₅H₅) gave mono‐ and dianions of these complexes. Treatment of the dianion 1 a with α‐bromodiphenylmethane gave three different iron–hepta(organo)[60]fullerenes, [Fe{η⁵‐C₆₀Ph₅(CHPh₂)₂}(η⁵‐Cp)], as a mixture of regioisomers. All three compounds were fully characterized by physical methods, including X‐ray crystallography and electrochemical measurements. One of the three compounds contains a new hoop‐shaped condensed aromatic system.